How to play PS3 on new iMac?(imac as a display)

Hey All,
I bought the new iMac on late 2012, it's a 27" one, it only has thunderbolt ports, no mini display ports like the older ones
Altough I'm too busy I'd love to play PS3 once and while, just too lazy to hook up with a huge TV, so I'm wondering
how do I play PS3 with my iMac?  I'd like to know what kind of other equipments/cables I need to buy with this new iMac
Much appreciated!
Roger

You can't do that. Macs with Thunderbolt ports can only be used as an external display for other Macs with Thunderbolt. See > http://support.apple.com/kb/PH11302
Unfortunately, the Target Display mode of the iMac only works with Thunderbolt (in the case of Macs with Thunderbolt) or Mini DisplayPort to Mini DisplayPort cables, so it's not compatible with any adapters. As a PlayStation 3 hasn't got a Thunderbolt or Mini DisplayPort connector, you can't connect it to the iMac

Similar Messages

  • How to play ps3 on mac book ?

    Hello, is there any way to play PS3 on my mac book pro (retina display)? I saw some video about how it works on the old mac book pro but I am not too sure if it works on the retina display version MBP. Please give me some advice about it. I do not want to buy a TV for ps3 only.

    Not possible because the system has no audio/video input. Only the Alienware M17x and M18x have such capability.

  • How to play you tube videos on iMac

    How do you play you tube videos on IMAC? is there a video converter software? Thanks!

    You might need to install Flash:
    http://get.adobe.com/flashplayer/

  • How do I migrate a new 21" iMac (2013) from an older iMac

    I have a new 21" iMac 2013 and need to migrate an old iMac to it. I can't use ethernet because its behind a firewall. Only thing I can see is a USB A male to USB A male. ANy other ideas.

    I found my own solution! Used an ethernet cable between the two computers!

  • How to play itunes music library from iMac using apple remote? Can only use my iPhone as a REMOTE to play on itunes to Apple TV!!

    how can i how can I play itunes library on my IPHONE4 from IMAC using APPLE REMOTE? I can only use my iPhone 4 as a REMOTE to play itunes from IMac to APPLE TV. 

    You cannot.  The remote app is exclusively for remotely controlling an apple tv for playback of a library on your computer.  If you want to play your computer's music on your iPhone you just use home sharing on both devices and play the music in the Music app on your phone, not using the Remote app on your phone.
    Source:
    Set up Remote app for iPhone, iPad, and iPod touch - Apple Support

  • How to play an mkv file on imac

    i have purchased an imac(intel) four days back. iam having some videos with me which are in mkv format. they cannot be played in quick time player. i would like to know the solution for this.

    It could be a 'difficult' form of Matroska file. FYI Matroska is just a container like MOV or AVI, and some mkv have the video encoded with Real Video Codec (RV9 RV10). Perian+QT can't decode this, but VLC will play .mkv files just fine on OS X, as long as they don't use H.264!
    It's a bit of a lottery until Matroska decide to support the Apple platform. I have found this:
    http://mkv4mac.free.fr/index.php?lang=en&p=lec
    which may help.
    But there may be another workaround: 1. Get Info the mkv file
    2. Change to extension to wmv. Save as wmv and that could work better.
    Or this link may be helpful:
    http://www.squidoo.com/mkv-converter-mac
    Recently, a poster (ZachP14) suggested this:
    "There's a program called Plex that runs .mkv files awesome on my 2.0 ghz macbook."
    http://www.plexapp.com/
    Maybe worth a try?
    More information here:
    ttp://en.wikipedia.org/wiki/Matroska

  • How to play piano on new Garageband?

    When I first opened the new application, a little piano popped up and I got to play some tunes. Then I closed the window and I can't, for the life of me, figure out how to reopen the little keyboard piano thing to continue playing. I would appreciate some help. Thanks!

    From the Main Menu Bar: 
         Window > Show Keyboard
    or better
         Window > Show Musical Typing

  • How to play flash video for 40 secs and then display webpage automatically?

    I have made a webpage, i want to show a flash video for 40 seconds when the page is opened. Then the Flash video should dissapear and the web page shall open. How should i do this?

    Hi
    This would require the use of actionscript placed inside the flash video, which would then redirect to the main site after the required time.
    (to find out how to do this you would be better advised in the flash forum - http://forums.adobe.com/community/flash/flash_general).
    PZ

  • How do I get the new version of iTunes to display images with podcasts (such as those from UK national Gallery)?

    Since installing iTunes 11 for mac the box at bottom L corner that used to show CD covers has gone - shame but not disastrous. However, i've also lost the illustrations that were transmitted with podcasts - such as those from the UK's National Gallery and the Queen!!!
    Anyone know if there is a setting to switch them back on, please?

    Don't feel bad, sometimes even the most obvious is hard to find. One of the things I do like about Apple products is there is a lot of un-documented features that you will stumble upon, even after years of using the same programs and features. Kind of like Easter eggs.

  • TS2756 How can i create a new usb connection (service)  on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )

    How can i create a new usb connection (service)  on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
    i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
    the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
    the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
    but not the usb iPhone i used to have.
    And when i try to add a new one i dont get a USB option.
    can some one help me please??
    this is how it looks (after the bluetooth PAN i used to have USB iPhone option)

    The question would be more appropriate in the Mac forums as it is not really related to the iPhone.

  • How do I use my old iMac as a third display on my new MacBook pro?

    I have both an iMac 2006 and a new 2011 MacBook Pro. I would like to use the old iMac as a second, prhaps third, monitor. How do I tturn my perfectly good iMac into a regular monitor?
    Also, within my setup, I have an extra 19" vga display and a new Yiynova 19" interactive pen display. I would like to use my macbook pro as the main coputer and the rest as displays.
    ppleas help.

    Welcome to Apple Support Communities
    If your iMac has got Mini-DVI, you have a 17, 20 or 24-inch iMac that doesn't support Target Display. Late 2009 and Mid 2010 27-inch iMacs, and iMacs with Thunderbolt can be used as external displays. Read > http://support.apple.com/kb/PH11302?viewlocale=en_US&locale=en_US
    If your old iMac doesn't support Target Display mode, you can use ScreenRecycler to use your old iMac as an extended display for the new iMac. The only thing you need is that both Macs are connected to the same network

  • How to drive a 30" Cinema Display from a new 27" iMac?

    How do I drive a 30" Cinema Display from a new 27" iMac that has no obvious video out port? There are lots of ports, but nothing resembling or identified as a video out port. Is the very small hole in the cabinet by the power in port the thing I'm looking for? If so, the power/video adapter for the Cinema will not work as is. Do I need a Mini DisplayPort to VGA Adapter? I am completely uncertain about this, and could use solid advice. The AppleCare tech I spoke with today seemed not to have a clue. He said he would get back with me on this. He didn't.

    Overview
    Every Mac with a Mini DisplayPort allows you to connect an external display or projector using an adapter. You can use an external display as your main workspace or to extend your desktop, or you can work in mirrored mode with a projector so you can view what your audience sees.
    Use the Mini DisplayPort to Dual-Link DVI Adapter to connect your Mac to a 30-inch display that includes a DVI connector, such as the 30-inch Apple Cinema Display HD, and enjoy the ultimate widescreen canvas with a resolution of 2560 by 1600 pixels.
    Compatible only with Mac computers with Mini DisplayPort and Mac OS X v10.5.6 or later.

  • I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    Hi mshields1162,
    Great question, and welcome to Apple Support Communities.
    First, you may want to choose to have the sidebar displayed for familiarity:
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    Afterwards, your device should be displayed if connected:
    We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
    Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
    iTunes 10: Sync to your iPod
    http://support.apple.com/kb/VI72
    Thanks,
    Matt M.

  • How can I transfer data from a PowerBook G4 to a new 27" iMac?

    I am about to purchase a new 27" iMac and will need to transfer the apps and data to it from an Apple PowerBook G4, running OS 10.4.11 (Tiger).  In the past i've been able to use an Ethernet cable to do the transfer.  I called the Apple retail store in Lynnwood, WA for advice and was told that I would need to attend a series of "one-on-one" sessions to learn how to do this!  Since I live many hours away and must travel via a ferry system, it's obviously impractical to attend these "sessions."
    Any suggestions?

    I've done a number of PowerPC ... Powerbook and mini ... conversions to Intel systems. I haven't done this to a Lion system, however, the general guidelines should still work.  Here's two references which have guided me ... this user note: https://discussions.apple.com/docs/DOC-2295 and this thread (see Cornelius's posts): https://discussions.apple.com/thread/2195685?threadID=2195685&tstart=0.
    I have used a firewire cable, in order to put the Powerbook into Target Disk Mode, prior to moving things over.
    As Joe mentioned, PowerPC apps no longer work in Lion. Check what you have by bringing up system profiler (about this mac, more info), click applications, then 'kind', which sorts the list by code type (PowerPC, Universal, etc). Anything identified as PowerPC will be lost unless you upgrade to a Universal or Intel version.

  • How can i convert an AAC file to an mp3 file on my new 2015 IMAC? The option to convert to mp3 isn't available on iTunes controls anymore.

    How do i convert an AAC file into an Mp3 file on my New 2015 iMac? The option to "convert to mp3" isn't available in controls. Thank you.

    Click here and follow the instructions.
    (121248)

Maybe you are looking for

  • Ipod won't sync all my songs?

    I have a 160g ipod classic, and I previously had a 80g classic, which synced all my music. However, this new one will not. It looks like the biggest problem is with songs that are in multiple playlists. So, song a will be in playlist 1 and 2 on itune

  • Reg: Creation of delivery from Contract

    Hi, I want to create a delivery type LF directly from Contract QC without creating a sales order. I have copied the copy control setting also, tried copying the item category as TAN for QC . Everything is failed. Please help me in doing this. Regards

  • Add a custom field for Product Allocation

    Hi experts, I have copied S140 to S501 to add a custom field for product allocation. I have added the custom field in MCVBAKUSR, so it is visible in MCVBAK. However, I don't know whether I can populate data into custom field. I searched in forum, som

  • Where should I store video files on Mac?

    Where should I file video files on my new Mac?

  • JDeveloper11g deployment problem

    Dear All.... I am new to JDeveloper 11g. I created an ADF application, and run it. i got this error. :\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\bin\startWebLogic.cmd [waiting for the server to complete its initializat