How to play stereo mix music and sing in my mic at the same time?

Hi guys, need help regarding Realtek HD audio driver
I want to play stereo mix music and sing in my mic at the same time.... not for recording purposes but in chatroom let's say.
I'm using XP...Toshiba Satellite S4747 laptop
In the Realtek software under " Realtek HD audio input" I have mic and stereo mix both.... but I can only select one at a time.....
Any solutions plzzz thxxxx
On a different note.... a friend of mine whose using one non-Toshiba laptop with win XP has an older version of the Realtek audio driver and can select both mic and stereo mix at the same time... I downloaded that version into my laptop but I still can only select one at a time....

Check the audio settings in Windows and dont forget in Realtek HD audio manager. You can find it in control panel.
I think your microphone is set to mute so check this.

Similar Messages

  • Can't play music and be on old network at the same time?

    I just want to use this device to play music and connect to my original wireless network. I assume since I'm not using an Airport Extreme to connect to the internet then I can't get the Airport Express to connect either. I can't listen to music and be online at the same time the way it is currently configured. Is there another way to set this up so I can connect to my airport on itunes and play music while being on my other wireless network?

    Try Doing a hard Reset your Express and go through the setup procedure again.
    This time making sure your joining your existing network.
    Powerbook G4, MacBook Pro, Mac G5, Mac G4, Mac Mini   Mac OS X (10.4.8)  

  • Can the airport express be used to stream music and act as network "extender" at the same time?

    I have a time capsule as my base station but need to improve network coverage in the other end of the house. Have a new airport express that I use for music streaming. Can this airport express be used for both music streaming and "network extension" at the same time, or do I need to buy another product?

    Yes, it can. You can either:
    Extend a wireless network. The Express needs to be positioned half way between the TC and the area without network coverage, and can be flakey. This is wireless only.
    Use Ethernet/Powerline. This is the preferred option (called a roaming network in Apple terminology). This allows for the Express to be placed wherever you want, as long as it reaches the other end of the house.

  • HT201933 How can I use my trackpad and my Apple Magic Mouse at the same time? If I don't have my mouse with me I can't use my laptop. The trackpad only moves an arrow around but doesn't let me click on anything?

    When I want to use only my laptop without the apple magic mouse, how do I disable the mouse so that the trackpad works?

    Hi, thanks for your answer,
    No, I connected the midi-in from the blofeld to midi-out from the virus. I was told to do so by the guy who sold me the ultralite mk3.
    I made some tests before getting the ultralite... I used the Virus soundcard as audio device and I could control the blofeld. But I had to link my monitor to the Blofed Out... then I wasn't able to listent to the Virus. But this way I could play the Blofeld in Logic (but couldn't see any midi data and when I bounced I had no sound)
    That's the main reason I decided to buy an external audio device (to be able to play both the Virus and the Blofeld)
    But I think the way I connected Blofeld to Virus is right because I can see the light which means it receives midi data.
    I think it's more about how to set it within logic...
    And the Blofeld only gets one Midi connection: Midi In
    Both my Virus and Blofeld are also connected to my MacPro via USB, that's the reason I didn't connect the synths to the ultralite via midi...
    thanks for you help! I'm getting crazy lol

  • Can i share music and photos between two users on the same machine?

    How can I share my music and photos between two users on the same machine?

    Thank you Joe - I tried this but it's only showing a teensy amount of music - the stuff on the second users account as opposed to the giagntic library on the 'main' account. I actually went to a Genius Bar and they said that apple doesn't really want you to share music between accounts - parents don't want to hear their kids music etc. Which seemed strange, but it might be the case sadly   Thanks anyway!

  • HT204368 How do I connect more than one Bluetooth enabled music device (subwoofer and Jambox) to my iPad at the same time?

    How do I connect more than one Bluetooth enabled music player (subwoofer and Jambox) to my iPad at the same time?

    You could start by posting onto an iPod forum instead of a "Using iPad" forum.  

  • Win 8 - How to use StereoMix and Headphones Mic at the same time?

    I am using Windows 8 64 bit and believe I may have an IDT driver problem.
    I need to enable StereoMix and my Headphones Mic at the same time. I know this was previously possible with windows xp and windows 7.
    What happens is If I enable either Headphones Mic (Logitech headphones with Mic) or StereoMix the other one becomes " current;ly unavailable"  I cannot get them both to work together. I can get StereoMix and the Internal Mic to work together ( both enabled at the same time) but the sound quality is bad because the internal mic picks up noises from the PC. I need to have both my headphones mic and stereo mix enabled at the same time.
    The driver I'm using is the one provided by HP with the laptop. It is called sp59620.exe
    Would another IDT driver solve the problem? Can you think of another reason this is not working?
    Here are my specs.
    System Manufacturer/Model Number HP Pavillion G7-2251dx
    OS Windows 8 64 bit
    CPU AMD A-8 4500M
    Memory 8 Gigabytes DDR3 sdram
    Graphics Card Discrete ATI Radeon HD 7640G with 2 Gigs
    Sound Card IDT Audio
    Monitor(s) Displays 17.3
    Screen Resolution 1600x900
    If you cannot help, where else should I look? i have tried Windows and Microsoft forums and no one can give me an answer.
    Thank you.

    I have tried the instructions in that video and I cant get passed the very bad feedback i get when telling my recording device to Listen.  His secone instruction from his notes here
    ["Right Click the Realtech HD audio device and set as default if its not already.
    (note you may want to turn off any powered speakers you may have to prevent feedback.)
    -Select the Recording Tab at the top of the window.
    -Select the Stereo Mix device and set it to default if its not already.
    -Right click and select Properties.
    -Select the Listen Tab at the top of the window.
    -Change the drop-down box to the entry for USB headset and check the Listen to this device checkbox.
    -click ok to dismiss the window.
    -Right click on the USB headset microphone device and select properties.
    -Select the Listen Tab at the top of the window.
    -Change the drop-down box to the entry for the Realtech HD Audio device and check the Listen to this device checkbox.
    -click ok to dismiss the window.
    So, essentially, the game audio will play through the Realtec, your mic is also set to play to the Realtec. both audio streams are now part of Stereo Mix. Stereo Mix is being listened to by your headset allowing you to hear the game and your voice.]
    ~~~~~~~~~~~~~~~~~
    Don't know about turning off any powered speakers.. the only speakers I have besides the headphones are the internal laptop speakers.  I get the same feedback if i have the headphones plugged in or not.

  • I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

    I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

    Recurring theme with the 4s losing alerts except for the phone ringing.  Most complaints seem to center on the 7.1 upgrade.  The fix is dodgy, putting in a charger, playing a you tube video then pulling out the charger and wiggling it until you get the sound back.  When you get the sound back, the volume buttons start to work again.  Alternate solutions involve cleaning the docking port with a toothbrush, running a pick over the electrodes etc.

  • I was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ?

    i was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ? i dont need the pictures or the back ups , i want to delete them but they are not there

    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • I am very disappointed with iTunes.  I have 1200 songs and I can't play them.  I try to play them and before one song finish a song starts playing. This then results in hearing two songs at the same time. I will like to know if you can fix this. I feel li

    I am very disappointed with iTunes.  I have 1200 songs and I can’t play them.  I try to play them and before one song finisha song starts playing. This then results in hearing two songs at the same time.I will like to know if you can fix this. I feel like listening with the iTunesplayer is useless.

    I don't know man I too hope apple will do something this new I-tunes blow my top lost my whole tune!!!

  • Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

    Using a mac book pro !
    Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

    Good question bigboggerchoot.  I also would like to know the answer to this.

  • How can I quit (close) Photoshop and keep all windows so that the next time I open Photoshop the fil

    How can I quit (close) Photoshop and keep all windows so that the next time I open Photoshop all the files that I had open are there already in the same position as when I closed Photoshop?
    I've been a Fireworks user for over 10 years and just switched to Photoshop. I cannot find a setting that will enable all my file windows to reopen when I quit Photoshop. This is really a problem since I often work on several files at the same time.
    Please let me know if the feature exists or point me to where I can post a message for a new feature to be implemented. The feature is a must for any designer working on large projects.
    Thanks!

    There is no such functionality. You could perhaps create a script that stores that info in a custom text file and arranges them accordingly in the workspace, but that's as good as it gets...
    Mylenium

  • Phone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

    Both my iphone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

    This post has already been answered. Why are you plugging your own site with an answer that has already been given? Not to mention that the information you are handing out is incorrect. There is no bug, there is no patch, and no one needs to delete any email addresses. If you take the time to read the posts with the correct answers, you will see that the solution is totally different than the erroneous one you have posted.
    GB

  • How can I record a guitar and my voice (only voice with mic) at the same time ?, how can I record a guitar and my voice (only voice with mic) at the same time ?

    how can I record a guitar and my voice (only voice with mic) at the same time ? I have one interface with Input 1 mic, Input 2 guitar, everything is working correct, but how can I activate multi recording or something like that... thanks

    Set your inputs on your channel strips and make sure you have one set to input 1 and the other input 2.  Arm the 2 audio tracks(the "R" in the track header. They will turn red and flash), then hit the record button. 

  • Yesterday, I downloaded I.O.S. 8 to both my iPhone and my wife's iPad at the same time.  She wants I.O.S. 8 removed.  How do I remove it from both devices?  I am willing to resort to my old IOS7.1.2.

    Yesterday, I downloaded I.O.S. 8 to both my iPhone and my wife's iPad at the same time.  She wants I.O.S. 8 removed.  How do I remove it from both devices?  I am willing to resort to my old IOS7.1.2.

    Sorry...downgrading is not supported.

Maybe you are looking for

  • BPM worklist in custom portal server

    Hello I have extended a domain containing soa, ucm and webcenter with the custom portal template to create a custom portal server. I am trying to integrate the bpm worklist taskflows on a page here. I have managed to get the bpm taskflows in a adf ap

  • Zalman CNS 7000 AlCu & Prescott Core & neo2 pls

    So I installed this Fan and really liked the quietness of it till I added a load then I was was running at 55-57 Degrees cel!!!! where as with stock I was at 45-50 Cel back to stock for now maybe the All copper would be better.... Anyone else have an

  • The button "More info" (in window  "About this Mac") is inactive

    Hi! I'm really don't know what is the problem. 2 days ago it worked. MacAir (Lion 10.7.3.) Thank you in advance

  • Time capsule - cant go back in time

    Something happened to my mac backup. I can't go back in time to restore files if I'm accessing certain folders on the drive.  For example, if I have Desktop selected, then I can go-back-in-time as far as I can, but when I have other folders selected,

  • Published EXE file Error-Adobe captivate 4

    Hi, I'm having problems with publishing an EXE file in Adobe captivate 4. I know it has something to do with our internet browser settings, we are a Court location and we have strict settings, but I'm wondering if there are work arounds through adobe