How to play the two video files simultaneously in Xletview

Hi All,
How to play the two video files simultaneously in Xletview. But only one video must be visible to user and the other video must run in the background(Invisible to user). I need to implement like broadcasting channel, I don't want to stop the current video while switching to another video and vice versa.
Is it possible to do in Xletview 0.3.6?. Or Anybody tried this?...
Sourab.

I think no one try this with xletview!
xletview is not for that!

Similar Messages

How can I combine two video files into one finished file?

I'm making a video of a guitar player. I'm using two cameras simultaneously. One gives the overall wide shot, and the other is zoomed in on his hands. Both cameras run at the same time. I would like to use the wide shot as the main video, and occasionally fade in clips from the zoomed in shot to show details of his playing. I can manually line up both files so they are synchronized. How do I cut a clip out of the main (wide) shot, leave the gap there, and insert a clip from the closeup? I'm putting the two video files on two of the video timelines and synchronizing them that way.
Any suggestions on how to proceed?

The effect you are looking for is 'Picture in Picture'. If you want the gap to be there for the duration of the timeline add some 'black video' - from the Tasks Pane> New Item - on the video track above the main track. Resize / position it to where you wish it to be.
Then with your second clip (now on video track 3)
Do the same sizing / positioning for it.
split video and audio and delete or disable the audio.
Cut it where you want the various start/ends of the fade to be.
Delete, or just disable (right-click) the unnecessary segments.
Apply fade in / out to the remaining segments.
[EDIT]
Also check out the 'Presets' in Video Effects. There are a variety of PiP presets that may do what you need.
[/EDIT]
Cheers,
Neale
Insanity is hereditary, you get it from your children

How to play AVI format Video files in Nokia C6

Hello All,
How to play AVI format Video files in Nokia C6-00.
Thanks
shanth

Please read this article to see if it helps: http://discussions.nokia.com/t5/Pool-of-Knowledge/What-to-do-if-video-does-not-play-well-on-your-pho...
As for the app Smart Movie, well that may not be a fully featured video player and as this is a user to user forum for support of Nokia products and services only, you won't find any help here unfortunately.

How to play the local flash file in nexus one smart phone?

In Nexus one smart phone(android 2.2), the flash file in the web site is played by browser,
But local flash file is not played.
How to play the local flash file?
Does not support local swf playing yet?

you can create from flash an AIR app that can be installed as a stand alone app on an android phone:
tutorial here
http://designupdate.com/blog/2010/07/27/air-for-android-access-the-microphone/

How to play back AVCHD video files without jerkiness result?

Hi all, I have an iMac 27" 3.06Ghz as well as the new MacBook Air 13 1.86Ghz, and both have 4GB of RAM. When I tried to play back AVCHD video files (*.mts) recorded from my Canon HF200 HD camcorder, the play back is always jerky and choppy. I have tried various software like Perian for QT, VLC, MPlayer Extended, all have the same result. However, I can play back other 1080p files like MKV and MOV just fine.
Is the jerkiness problem that I am seeing due to underpowered hardware? or is it I am not using the correct software? Note that I am not trying to edit HD videos, I just want to be able to play them back smoothly. I can play the same files on Windows 7 natively without any issues.
I am curious if any of you have the same problem. Please help!
Thanks in advance.
Ken

Swaza,
Just thought I would jump in and share some experiences with .tod and .mod files.
I too have the JVC GZ-HD7 camera and I can confirm that the new version of the MPEG-SC 1.93beta will open and convert .tod to .mov for use with iMovieHD. I am not sure that the files can be used with iMovie08 since I have not tried, but it will work in iMovieHD just like any other qt or .mov file import.
Also, you can use the QTpro plugin that came with the camera (should be on the CD as the only MAC software available.) This will allow you to open the files in QT and convert them to any other format needed. This plugin unfortunately does not allow QTpro to open the older .mod files of previous JVC cameras. For that you can still use MPEG-SC.
In my experiences over the last few weeks, having mistakenly dumped all of my footage onto my hdd as I used to do with my older JVC cameras, I am now stuck with 3 hours of footage on my HDD as .tod files. I have been struggling to find the right blend of codec type, compression amount, fps, and quality to convert these files in an acceptable resolution (1920x1080 full - another mistake since iMovie08 will not import this quality but will import the 1440 CBR mode.) Converting these files is a nightmare and has become a stain on my otherwise wonderfu lexperience with this new camera (It is an awesome camera despite what negative stuff the "Canon fanboys" are saying!) It takes an unbelievably long time to convert. And you will find that when viewing these files in QT either as .tod or even after converting to .mov, they will be jerky and stutter. I believe this is more to the fact that the files are just really huge. Playback inside of iMovie06HD was perfect for me though.
Hope this helps out and I hope others may offer solutions as to what codecs they are using and what settings they are using to keep the quality as high as possible when converting these files.

I cannot play the avi video file on my macbook!!! Need help please

hi there
i have a macbook and it plays other avi video file but i recently downloaded this video off of utorrent and when i play on it, it says quicktime couldnt recognize this video and suggests me and takes me to another link. I have already downloaded Perian, what else can i do about it? I need some help, thank you.

See if VLC will work (it should)....
http://www.macupdate.com/app/mac/5758/vlc-media-player
....go to the developers web site and check all the file formats that it will run.....

How to play a AVI video file in Nokia 5230

Hi, Can anybody please tell me the procedure how to play a avi file in Nokia 5230.Thx in advance.

5230 can't play .avi files out of the box you need to install application like smartmovie player or core player to play it. These two, unfortunately, aren't free. A work around is to convert .avi files to .mp4 format using a video converter like Super by erightsoft(google for it).
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

How to play .DAT format video file in my iPOD

Hi all,
I have 5th generation video iPOD. I tried to load some videos which is in .dat format, but it doesn't play. Can anyone help me how to convert this .dat file format to corresponding format that run on my iPOD.
Thanks,
Santhosh
5th Generation video iPOD Windows XP

Hi,
I have VCD, which is in DAT format. I tried this software videora but its not working. Could you suggest how to do the conversion?

What is the best way to edit/sync two video files?

Has anyone had experience with editing 2 movies files? I have recently taken video with 2 cameras of the same quality and am attempting to 'merge' the two video files. What's the best way to 'sync' the 2 files?
Thanks

The real answer is to do this in Final Cut Pro X with the new multicam feature with automatic syncing using the audio wave forms.
However, it is quite possible in iMovie.
Here is how I did it in iMovie.
I recently did this for a video of my niece's senior voice recital. (Video is below)
The key is to use the Cutaway feature of iMovie. If you are not familiar with Cutaway,here is a good tutorial from Ken Stone.
I used the side camera as my base clips, and used the back camera as the cutaway clips. The back camera audio track was OK but had too much coughing and noise.
Here are tips for getting it lined up perfectly.
1) In iMovie/Preferences make sure that you check "Display Time as hh:mm:ss:frames" so you can edit to the frame level. (Also, select "Show Advanced Tools so you get the Cutaway feature)
2) In the iMovie Project View, set the thumbnail slider to 1/2 second so you have a great deal of control.
3) Initially, leave the volume at 100% on the Cutaway track, so that both tracks are playing. You can hear when they are off.
4) Click the "Waveforms" button in the Project view, so you get a visual cue of how to line up the tracks.
5) Between the audible cues and the visual cues, you can nudge the cutaway back and forth one frame at a time by dragging until you have it perfect.
6) When it is lined up to your satisfaction, set the volume slider of the Cutaway track to zero, and turn off the waveforms. You can also move the thumbnail slider back to 5 seconds or so.
7) For some of the fine work, I switched to the "single row timeline view". This slows you down a bit, but lets you see the waveforms more clearly.
8) I made heavy use of the iMovie Comment Marker feature. I watched the whole base video/audio track and inserted comment markers at the points where I wanted the Cutaway to begin and end. For example, a comment might say "Insert Cutaway 1". I would usually time the cutaway so it started at a distinct audio event, such as when the piano start. This comment marker made it easy to drag my cutaway to a point that was approximately correct.
9) If you need to do a lot of cutaways, I find that it helps to use the SPLIT CLIP command in your project. This way you can have a single cutaway per clip, and this makes it easier to manage and is less processor and memory intensive for iMovie. I would use the comments to mark the entry and exit points of the cutaway as described above. I would then select that portion of the clip that included these markers plus a little more, so that a yellow border is around the selection. Then right-click/SPLIT CLIP (or CLIP/SPLIT CLIP in the top menu). This does not physically splt the clip within the Event. It only virtually splits the clip in the project.

Playing audio and video files in JSF (.wav,.mp3)

Hi,
I would like to know how to play audio and video files such as .wav,.mp3 in jsf .
could any one please post the code for playing the wav files.
Thanks,
Ram

There is no JSF component to do this, so you would have to write your own custom component to render an <object ...> element.
Or, you can use <f:verbatim> wrapped around an html <object ...> element.

How do I copy my video files from iPhoto to iMovie. The two hour wait to view all in iMovie puts the kibosh on my edit time.

How do I copy my video files from iPhoto to iMovie? The two + hour wait for thumb nails and hour long wait looking for the right videos kills the time I have to edit.

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

Play two video files at the same time.

I am trying to play two video files at the same time. I create two threads, each of which has its own frame, playing button, and builds its own graph to play the file. Now everything seems works except that when the first file is being played and I hit PLAY
to play the second file, the program plays the second file but the first one is paused; furthermore the control button has no response for the first one. Did I miss anything? Can anyone help me figure out the problem?
Best,
Fayin

You don't need separate threads for 2+ playback pipelines because the filters create worker threads internally and don't block execution on calling thread.
If you decide to keep separate threads, you will have to follow Michel's advice and have message pumps on those threads.
You can also have both files in the same graph, in which case you have perfect sync between them (both start playing together in sync), however you cannot pause/stop/run files separately.
The problem you described is most likely not a DirectShow problem and is rather about generic threading, COM or window messaging.
http://alax.info/blog/tag/directshow

How i can play smoother HD video files in realtime, when i change the duration in cs6

How i can play smoother HD video files in realtime, when i change the duration in cs6.

More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840

Is it possible to play two audio files simultaneously.

Hi,
Is it possible to play two audio files simultaneously.
I modified the 'SpeakHere' to play two audio files simultaneously, it worked perfectly on simulator but get hanged on iphone.
To this I implemented NSTimer, which regularly checks for both player instance every second.As soon as any player gets stopped Timer task stops the second one forcefully and again starts both.
thanks.

Hi Jay
Do you have the eLearning Suite? If so, you have Adobe Presenter available to you. If you don't, you should be able to download the Presenter installation file and evaluate it.
Presenter is an add in for PowerPoint. The neat thing about it is that it provides for a Table of Contents type of functionality as you see is configured in Captivate. But the twist with that is you are able to do something you cannot do in Captivate. You are able to insert videos inside the TOC area!
Just musing out loud... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How to view two video files synchronously?

i have some questions about video/audio merging !
first, i have two video chips a and b ,how can i merge them into only one file,and when i view it ,the two video chips will paly together, a is on the left,and b is on the right.
second, i have two audio chips about telephoning. c is the record of one terminal,and d is the other record of terminal .i want to conbine c and d as only one file ,so,when i play it ,i will hear a full conversation.
trird, how can i merge the video and audio files ,and then play it together.

These are back-ups for the IFO files, which are used for play and control functions for the DVD.
http://filext.com/file-extension/BUP
You really need the VOB files to view or edit the DVD video.

How to play the two video files simultaneously in Xletview

Similar Messages

Maybe you are looking for