How to play video through flickr, cest posible?

Using Flickr for video screen is great, but can I run videos as well? Using FLICKR? I tried but could not.. Perhaps you know if it is possible and how?

Hey Michael,
Where i am going to find the correct third-party development tools forum for apple.

Similar Messages

  • Can't Play Video Through To Camera iMovie Crashes

    I was working with iMovie 3 the other day and viewing the project on my TV using my trusty old Canopus ADVC 100 with the "Play Video Through To Camera" option checked in Preferences. Today I went to preview a new project and iMovie crashes everytime it finishes loading all of the clips with the play through option checked. The only way to open the project is to turn off the ADVC and uncheck the play-though option and re-save. It will load whether the ADVC is on or off as long as the play through option is not checked.
    What could have changed?

    Hi David
    This is a guessing question - so many ways things can go wrong.
    May be You find some help in my list:
    Mac:
    - hardware
    ◊ Slow hard disk (fragmented: repair permissions, repair hard disk, use a faster hard disk)
    ◊ I wonder how full your Mac's hard disc is. (David Babsky) A near full hard disk prevents Import/Capture. 10% free is recommended + space for Import/Capture + work space (about 4 to
    5 times the amount needed for Capture) eg on a 200Gb hard disk You need 20Gb + (one hour tape)
    13Gb + 50Gb = about 80 to 90Gb free space.
    ◊ Disconnect all other ext devices (FW and USB) exept Camera (and keyboard + mouse) and try again
    ◊ Reset PRAM
    ◊ Bad RAM-chips
    ◊ disconnect Mac from powerline (not just switch off, really plug out) for a few minutes to reset FW ports
    - software
    ◊ File-Vault is on - turn it off
    ◊ Something is occupying the CPU/System, like other programs, Internet etc.
    ◊ Do You have desktop pictures or screen or energy-savers active? Try turning them off.
    ◊ Updating - OS has to be a clean install - not an update eg from X.3.x to X.4.x (no good) OS X.4.0-5 needs a clean install to work (I use X.3.9)
    ◊ Updating QT and/or other updates (to 7 needs v6 to be cleaned out first) QT v.7.0.0-4 needs a clean install to work (I use 6.5.2)
    ◊ Have you tried the crazy fix: Open GarageBand, play a few notes, close it and reopen iMovie. The camera should import fine now. Sue/SDillini
    ◊ Running iDVD at the same time as iMovie can cause problems: (Lennart Thelander)
    ◊ If You also have installed FinalCut Express/pro there are possibly problems with this
    iMovie:
    ◊ remove bookmarks in iMovie project
    ◊ Trash: com.apple.iMovie.plist and com.apple.iMovie3.plist : files (Xinram)
    Connection:
    ◊ don’t Daisy chain Camcorder <--> external hard disk <--> Mac
    ◊ FW-wire cable, is it OK?
    ◊ USB/USB2 is NO GO !
    ◊ Cheque FW connection at Camera end. OK? (Adam Smith1)
    ◊ Cheque FW connection at Mac end. OK?
    Camera:
    ◊ The Camera is set to VTR ? (not as when You ”film” record with it)
    ◊ You may be need to go to the Camera menu and select digital out.
    ◊ defective camera TRY IT ON ANOTHER MAC ! (if the A/D chip in the camera is harmed then it will say in iMovie that the camera is connected and You can forward resp. backward the tape but there will be no picture or sound just the blue screen).
    ◊ connect camera to power-line, not battery-only....(Karsten Schlüter)
    ◊ Canons don't allow daisychaining on firewire, make it "only device" on port (Karsten Schlüter)
    ◊ Cheque the menu on Your Camera so that it communicates with the FW digitally to Your Mac
    ◊ Date and Time is correct on Your Camera ?
    Tape:
    ◊ Drop outs on the miniDV-tape - make a camera to camera copy on a tape which You have previous recorded with a time code (dummy recording).
    ◊ Break in the time-code on the miniDV tape (make a camera to camera copy on a tape which is pre-recorded with nothing/anything so that the tape has a time-code from beginning to the end)
    ◊ If You recorded in LP-mode (90 min on a standard 60 min tape with 12-bit sound). Try to change in iMovie pref. to import but not as individual clips. If this doesn’t work You have to make a Camera to Camera copy with the receiving Camera set to SP-mode and 16-bit sound.
    More:
    ◊ follow advises here http://docs.info.apple.com/article.html?artnum=43000
    ◊ follow Grandmaster Dan's advice for Sony cameras here: http://www.danslagle.com/mac/iMovie/usage/5020.shtml
    NEWS: Jerry Harris writes:
    I know that in a lot of the new Sony HD cameras, iMovie requires that you turn iLink Conv off. I would look for a similar setting for your camera. This setting has to do with shooting a movie in one format, and using the camera to import as a different format. For instance, if you shoot HD footage and have iLink conv on - the camera will send DV to the computer etc...
    So, case in point: look for a setting on your camera that has to do with the video format and see if that helps.
    Yours Bengt W

  • Updated my mac to mountain lion 10.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install? Can anyone help me?

    updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?

    It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
    Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
    As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
    Here's a thread that helped me with iPhoto:
    https://discussions.apple.com/thread/4794375?start=0&tstart=0

  • Ipod freezes when playing video through dock

    Okay, this is a challenging one. I will be surprised if someone can help me figure this one out, but I will be very grateful!!
    Picked up a brand new 60gb 5th generation video ipod the other day. 1.1 update already installed. Everything worked great. Was able to play videos through the AV dock, no problem, and was able to hook it up to the JBL stereo for the ipod, no problem.
    Here is where it gets interesting. I took an avi video from my digital camera, and used Quicktime Pro to convert it into a .mov Apple Quicktime movie. I am using Windows XP. I then imported that .mov movie into itunes. Then I right clicked on the file and told itunes to convert it into the ipod format. I then hooked the ipod up to the computer, and the video was transferred to the ipod with no problems.
    Then I was able to play the video with no problem on the ipod screen (not hooked up to the AV dock). Then I inserted the ipod into the AV dock that is hooked up to my tv. I played videos this way without a problem, before I loaded this new home made video. When I played the new video, I answered Yes to Tv Out, and right after that point my ipod froze up. No video played at all. Then I had to reset my ipod.
    I tried this again several times, with the same result. This was now happening with regular videos that I downloaded from itunes. Also now, when I hooked the ipod up to the JBL stereo, and just tried to play a song, the ipod would freeze up. However, songs and videos play fine when the ipod is not hooked up to a dock.
    It seems to me like my home made video somehow corrupted the software drivers for the port on the ipod.
    Then to fix the problem, I finally had to do the dreaded RESTORE. I could not update the ipod, because I was already at version 1.1. I tried rolling back to an earlier version, but the updater told me that the update was not compatible with my ipod.
    The RESTORE did fix the problem. The ipod was completely back to normal. I could hook it up to the JBL and the AV dock with no problems. Until...yes, I tried playing the home made video again. I just wanted to see if it was a fluke. Same problem came back....arrghhh!
    He is another weird observation. I can start the video playing on the ipod, without it hooked up to the dock, and answer Yes to tv out. The video starts playing, then I can insert the ipod into the dock, while it is still playing, and the video plays fine on the tv, through the dock! Until the video finishes. Once the video finishes, the ipod freezes up again.
    I wonder if this is a hardware problem, and I should just return my ipod. It seems like a software problem to me. I think if it is my home made video that is corrupting my ipod, I think itunes should be smart enough to not copy something to my ipod that is going to corrupt it.
    Ha..ha...wow, sorry that was very long-winded. Anyone have any suggestions?
    Dell Dimension 2.8ghz P4   Windows XP   2.25GB of RAM

    All I can suggest is to re-encode the video as m4v with QT Pro, there might've been a problem in encoding. Also, try sending this same video (setting TV Out to Yes) with the iPod not plugged into the dock and with an Apple RCA cable, if you have one, hooked up to a TV. If that works, the dock connector might be damaged (unlikely) but it's possible. So once you've re-encoded, see if the dock situation works then. Good luck.

  • How to play music through my external hard drive through iTunes on my mac?

    I recently purchased a external hard drive for my mac for my movies and music, as my disc was almost full.
    I have spent HOURS searching how to play music through my itunes without transferring them onto the mac.
    BUT everytime I click media destination folder in prefrences and advance, the whole music library in my external hard drive folder is  greyed out, and when i click it nothing happens.
    PLEASE someone help...

    First, a brand new drive is likely formatted for use with Windows.  You need to reformat it for use with Mac.
    Pondini: Formatting,  Partitioning, Verifying,  and  Repairing  Disks... - http://web.me.com/pondini/AppleTips/DU.html
    Second, you are better off moving the whole iTunes library to the external drive, not just the media.
    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
    Do not confuse moving your whole folder and library with moving just media files as in
    iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449

  • How to play videos in Nokia C2-02 ?

    could u pls help me how to play videos in c2-02 mobile?
    Moderator's notes: The post was edited. A more appropriate subject is provided.

    If you want to play videos present in your pc on your phone, they must be converted to phone supported resolution.
    You have to convert the high resolution videos to low resolution 320X240, MP4 format.
    You can do so with Format Factory software for PC.
    Get it at www.pcfreetime.com
    Any further help, feel free to ask.
    -------------------If this post helped you, click on accept as solution.------------------
    -----------------------------Appreciate by clicking on white star.----------------------------

  • How to play videos in normal quality in youtube as it is always buffered in hq and there is no option to change quality??

    how to play videos in normal quality in youtube as it is always buffered in hq and there is no option to change quality?? problem because i hav network speed upto 512kbps and hq videos are nt buffered properly in it..

    macalltheway wrote:
    What a bummer.
    Now I'm stuck with a just-about useless camera. I really need something as small as the FH1 (it's TINY).
    Hard-drive camcorders record MPG2, which I assume makes them just as useless.
    Is then MiniDV the only choice for a sub-$500 1080i/p camera that will allow me to edit footage without converting?
    If so, any tips on the smallest one out there?
    Google came up with Sony's DCR-PC55, but it's four years old and only does SD...
    Do you want good OR do you want cheap? That is the decision you need to make. Also, tiny tends to be the opposite of good.
    P.S. AIC converted it best; ProRes(Lo/HQ) left it pixelated for playback. But it takes about an hour a minute, and increases the file-size tenfold, so it's no good anyway.
    Yes, your actual editable video file is going to be 10x bigger than a MPEG-4 file. That is what you want.
    P.S. 2 "....FCP is converting your video behind the scenes which is causing all your problems."
    If that's the case, then my oldish MacBook Pro (2GHz Duo, 2GB RAM) has enough juice to play the 640x480 MPG4 clips smoothly, but not the HD ones. Could the latest MacBook (2.5/6/8GHz, 8GB RAM) could play the 1080p30 clips smoothly?
    No, you still have the same problem. MPEG-4 files are non-editable. You really need to convert to an editable format and then bring that into FCP. MPEG Streamclip is going to be your best choice.

  • How to play videos in other formats other than mp4 in ipod touch.

    how to play videos in other formats other than mp4 in ipod touch.
    I have tried an app named VLC streamer. But I never knew how to use it...
    Can someone suggest anything else?

    Under "General" in iTunes Preferences, does "Play
    Videos in.." allow you to set the playback of videos
    as you desire?
    kind of. It does spawn a new window, which is great (thanks!). But it seems to be at a lower resolution - does iTunes compress further or display at lower res? What is the function that people are supposed to be able to use to use iTunes as a media center to watch movies?

  • How to play videos in 5300 help?

    How to play videos in 5300 help?

    01-Sep-200705:33 PM
    sushjames wrote:
    How to play videos in 5300 help?
    Hi sushjames
    Need to be in one of following formats:
    3GPP formats (H.263)
    H.264/AVC
    MPEG-4
    These links may help you:
    http://www.forum.nokia.com/main/resources/technologies/audiovideo/
    http://www.forum.nokia.com/devices/5300
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Playing videos through an xbox 360 or a tv?

    Is there a way to play videos through an xbox 360? I know you can play music through it but I just wanted to know if there is a way to play videos also.
    also, is there a way to play my iPod through my tv?
    Thanks,
    Sam

    I am not too sure about an XBox 360.
    Although you can play it through your TV, provided that you have the right cables needed.
    Apple Store: iPod AV Cable
    If you have this cable then on your iPod under Video Settings select Tv"Off" and change it to TV"On" this will output the single to your TV.

  • How to play video files that are in Drop box on iPod?

    How to play video files that are in Drop box on iPod?

    I am going to have to write a technote about this, because it comes up a lot.
    Flash Player itself is designed to play SWF content as a browser plugin or as an ActiveX control (when it's IE Windows).
    There is a standalone Flash Player, but that's something Adobe  provides directly as a feature of Flash CS4 Professional. It gets installed with Flash. We have made some standalone players available on http://www.adobe.com/support/flashplayer/downloads.html, but not all (and I don't know why.  Looking into it)
    There are numerous 3rd party standalone SWF players out there though.  Some designed to just play video, others that play full SWF. I suggest a google search of 'play SWF standalone' and read the results.
    On the Mac, consumers who want to play SWF content off their desktop can use the Adobe Media Player. You can import a local SWF (and FLV and other video) and play it in AMP.  Get it here:
    http://www.adobe.com/products/mediaplayer/
    That's Mac only, doesn't work on Windows.

  • How firefox play video in youtube?

    if not installed flash player, how firefox play video in youtube?

    Unfortunately not all HTML5 videos work in Firefox, so you may still need the Flash player.
    You can find the 32 bit version of the Flash Player installer for a 32 bit Firefox version here (scroll down to Flash Player (32 bit)):
    * http://www.adobe.com/special/products/flashplayer/fp_distribution3.html

  • How to play videos from cnn?

    how to play videos from cnn?

    cnn.com   listenlive.eu    sites for news and music but its saves on phone and can't open it. I think they are in wmp.   is there a player that play and open different formats?

  • Cannot play videos through Facebook saying I need to download and install latest version of Flash player

    Hello.
    I have here a MacBook Pro OS X version 10.9.5. I cannot play videos through Facebook. It says I must download and and install the latest version of my Adobe Flash player. I already downloaded and installed the latest version however, it still says the same thing whenever i play videos in Facebook. On the other hand, i can play videos in other sites such as youtube and other online movie streaming. Can anyone please help me with this?
    Thank you.

    Oh, now its working. Thanks

  • How to play video to be played in adobe flash player

    How to play  video to be played in adobe flash player?.

    Yes, you can install the flash-supported browsers like Photon, iSwifter, Puffin etc to view flash-based websites, to play flash games, watch flash videos, etc. If you want to play local Flash videsos, you can convert the flash videos to iPad supported video formats using video converting software. This tutorial is gonna help you: http://www.iorgsoft.com/article/ipad/mac-flash-to-ipad-converter/

Maybe you are looking for

  • How do I determine the status of a bug report whose tracking number is 3919162?

    I was given this tracking # by a tech support guy who passed my problem on to the engineering department as a bug. He told me that I could get the status on the 'pre-release forum' but I can't figure out how. Can someone advise? Thanks, Bob

  • Badi for release for purchase order.

    hi all, in me28->release (approve) purchasing documents->release purchasing document..there u have a button (release+save ) button   i want to enhance at that pointi.e when u select the po no and click the button,automatically trigger an email to the

  • Regarding Active Service in tcode SICF for ESS mSS configuration in SAP HR

    Dear Experts, To active the services for ESS and MSS .I have used the tcode SICF.After That I followed the path SAP---.>BC---->Webdynpro----->SAP.I had right clicked and made the services active.The services are active,but when I click on test servic

  • Fake Prepopulate

    Hello I have a situation where all the provisions of a user's account on a resource are done by operators (with the neccessary roles to be able to directly provision a resource). The operators should be able to see the user's manager on the form of t

  • Media pending/offline footage cs6 help

    I've just imported a ton of clips into a premiere file im working on. But its being incredibly slow in loading them. Right now its stuck on "generating peak file for MVI_0870.MOV". keeps getting stuck on this one clip. i've deleted the cache and move