How to plot mutiple arrays on right and left y axes?
Hi everyone,
I have a (hopefully small?) problem... I have a 2D array with 6 columns of data I need to plot on a graph... I would like array 0 to plot on the left axis and arrays 1-5 to plot using the left axis... I have tried using clusters to group both sets of data wired to a for loop for each axis... But this is not working... Can't seem to find anything online to help with this..
Any suggestions would be greatly appreciated.
Regards,
Jack
Solved!
Go to Solution.
Not to worry.... Found this link..
http://digital.ni.com/public.nsf/allkb/049C7E362BE4270A8625756E005CC46F
Thanks for vewing...
Regards,
Jack
Similar Messages
-
How do I share / unlink the right and left channel, so I can work with them individually ?
I use "Adobe Sound Booster CS5"
I have a stereo soundtrack, which I only want to remove noise in only one channel (right).
How do I share / unlink the right and left channel, so I can work with them individually ?When Soundbooth was first developed, it had a few extra things than what were not available in Audition. However, Audition remained the more high end sound editing tool. Soundbooth was locked to a multiple channel editing approach. In Audition, single editing is easy - you simply click the L or R at the right end of the sound channel to lock it and then you can edit the other channel only.
Soundbooth has been discontinued and Audition now has taken its place from CS6 to the Creative Cloud.
The above is some background info. To your current situation, you can use a workaround like:
* Export your audio file to separate channels by File > Export > Channels to mono files.
You will get 2 files with _L and _R suffix.
You can then edit them separately. You can go from Mono to Stereo by the following step.
Or
* Choose - Edit > Insert > Channels into New Multitrack file.
That will separate the Left and Right Channels and add them to a new multitrack file.
You can then click the Edit link at the top right of the channel to edit it.
You can then save that file as a new audio file.
Dean -
At the top of my homepage, I'm getting a message "Downloading the latest applications", but the circle to the left keeps spinning, and no applications are downloaded. I don't know how to stop this, tried right and left clicking on the bar. This occurs every time I open Firefox. How can I stop or disable this?
== This happened ==
Every time Firefox opened
== Several weeks ago.See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the ''updates'' and ''updates\0'' folder:
Vista/Windows7:
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\ (updates)
C:\Users\<user>\AppData\Local\VirtualStore\Program Files\Mozilla Firefox\ (updates)
%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates\ -
How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?
Which version if iPhoto and MacOS X do you have?
Do you have any iPhoto plug-ins installed?
Open the folder /Library/Application Support/iPhoto/Plugins/
To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto. Is there anything installed? -
do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?
do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?
-
How do i readjust the right and left speaker in iPod nano 2nd gen.
How do i readjust the right and left speaker in iPod nano 2nd gen.
Are you playing a song in iTunes that listed in contents of iPod while it is connected. Try going to your music lib and play a song and disconnect your iPod.
Also, make sure you are not located in some sub dir that utililizes iTunes.
You can also hit 'ctrl,alt,delete' to see what applications are running on your PC. -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
Cross-Tab should expand right and left sides equally
Hi,
We are using Crystal Report XI release 2, Cross-Tab expands towards right side.
Our report parameter range is not constant.
When fewer columns we can get based on parameter, Cross-Tab does not look good because it prints left to right and we can see a lot space at right side of the page.
User asking put it in center, but it does not look good when we get more columns (it prints left to right).
We can achieve a good look, if it grows left and right sides equally.
How to achieve this please give me some suggestions.
Thanks and Regards,
Manjunath N, J JoginThough you can not make a CrossTab grow equally on right and left side but you can reduce the Gap at the end .
To achieve this,please Right Click on the cross --> Cross Tab Expert --> Customized Style tab and uncheck the checkbox Keep Columns Together
Also for the summary fields, make them left aligned by default CR aligns numeric fields to the right. do the same thing for Row/column headers. This way you'll save lot of space.
Hope this helps! -
Earphones labeled Right and Left
My wife has an iPod nano (3rd Gen) and she was wondering why the earphones are labeled Right and Left? Is this in case there is a problem? Is there another reason I'm not aware of?
Thanks for answering.Hello legacycaptain,
My wife has an iPod nano (3rd Gen) and she was wondering why the earphones are labeled Right and Left? Is this in case there is a problem? Is there another reason I'm not aware of?
They are labeled that way because each headphone was designed to fit each respective ear more comfortably than the other. If you put them in the opposite way you may feel a slight discomfort with the way the feel than compared to how they are supposed to be worn.
B-rock -
I'm trying to mix a guitar track so it is heard in the right and left ear and not in the center
I'm trying to mix a guitar track in GarageBand. I'd like to have the same guitar track heard in the right and left ear. When I mix it that way, the guitar comes from the center. Is there a way to place this track so that it appears to come from both the left and right side?
Mr. Snook wrote:
If my finger picked guitar track is doubled and pasted slightly ahead or behind, the guitars will be out of sync, I think, and sound off in mix.
emphasis on "tiny amount"
TINY fractions of a second. this is how you get the "full sound"
zoom in as far as you can, and make sure the "snap to grid" and "alignment guides" menuItems are not checked. -
Capturing double click of right and left mouse buttons
Hi everybody,
I am writing a application which makes use of mouse. My difficulty is like how to capture the right and left double click of mouse?
Please guide its urgent.Any reply will really appreciate
Thank you
dgkhi
hope the piece of code helps u out
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.tree.*;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.io.*;
public class MouseClicks extends JFrame implements MouseListener
static public void main(String[] args)
MouseClicks targetFrame = new MouseClicks("Drop");
targetFrame.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) { System.exit(0);}
targetFrame.setSize (800, 500);
targetFrame.setVisible(true);
public MouseClicks(String str) {
super(str);
addMouseListener(this);
public void mouseClicked(MouseEvent e)
if(SwingUtilities.isLeftMouseButton(e))
if(e.getClickCount() == 2)
System.out.println("LeftDoubleClicked");
else
System.out.println("LeftSingleClicked");
else if(SwingUtilities.isRightMouseButton(e))
if(e.getClickCount() == 2)
System.out.println("RightDoubleclicked");
else
System.out.println("RightSingleClick");
public void mousePressed(MouseEvent e)
public void mouseReleased(MouseEvent e)
public void mouseEntered(MouseEvent e)
public void mouseExited(MouseEvent e)
cheers -
Camera Vision Loop Snap will be 1% right and left inverse in Vision2013 and Labview 2013.
Hello,
I use a Camera to Loop Capture Vision Snap in Vision2013 and Labview 2013.
(see the right-up picture that is the needle in the right side, but the right-down picture it is in the left side.)
The right-up picture that is the current snap image shows normally.
The right-down picture is after en-queued and de-queued image.
But the image will be 1 % Randenly Chance to show right and left inverse.
Could someone tell me how to solve the problem?
Thanks.
Attachments:
IMAQ_Mirro_)_(.JPG 149 KB
IMAQ_realtime_image_snap_queue.JPG 196 KBGood-day.
2 Cameras are both the same "AVT GUPPY F033B" , Connected to the IEEE1394 interface PCI Card (2 ports, Controller Chip is Texas Instruments).(See" cam_driver.JPG")
Both Cameras are 1 % Randenly right and left inverse.(See" IMAG_Mirro_)_(2.JPG")
The Labview 2012 program is the attached file called "IMAGE_LOOP_SNAP_Queue As a Multiplexer_LV2012.vi.zip"
Thanks.
Attachments:
cam_driver.JPG 55 KB
IMAQ_Mirro_)_(_2.JPG 159 KB
IMAGE_LOOP_SNAP_Queue As a Multiplexer_LV2012.vi.zip 769 KB -
Hi,
Just switched from CS6 to PS CC. I am very comfortable using ACR in previous versions. I liked to use the preview checkbox located in the upper right-hand corner to see before and afters. That checkbox is no longer in my version of PS CC. I see that they have side-by-side, top and bottom and right and left before and after options in the lower right-hand corner in this version. Is there anyway to get that legacy preview checkbox back so that I can use it?Hi Warunicorn,
Thank you very much. I just could not find it on my own. I will have more questions as I get into it.
Jim -
320x240 QT export produces black bars on right and left
Ok, this one is strange. So far, it only appears to affect 320x240 targets from sources that don't have square pixels. Starting with a 720x480 DV movie (even if I change the properties to display 640x480), I export directly to 320x240 and I get a movie with black bars down the right and left. I did not tell QT to letterbox or scale, although telling it to scale does no help.
The problem seems to be in the meta data. If I go to the movie's visual properties and change the move dimensions to 324x240 (with preserve aspect ratio unchecked), then the black bars disappear. When I change it back to 320x240, they are still gone and the movie plays fine. I save it and reopen it, and the black bars are back! The same thing happens exporting from Final Cut Pro using Quicktime conversion. This is definitely a bug.
The work around is to export to another 4:3 format with square pixels first and export that to 320x240.
On a related note, the same thing happens when I record a movie in Quicktime at 320x240. I get a recording with black bars down the sides.
This has never happened to me before. I'm a professional QT software developer and a content producer. I've been using Quicktime Pro for a decade, at least. I've been over all of the export settings, and I've deleted all of my Quicktime preference files.
Is there a way to report a bug to Apple?Regarding: "there's a pretty good chance that your playback target isn't Quicktime Player"...
My assumption is that if your material is 320x240, it's probably that size because you're planning to either display it on a small-screen device, send it to a TV set, embed it in a presentation, or deliver it via the Web. In any of those cases, your final delivery target isn't QuickTime Player, but rather some other mode, such as the QuickTime web plug-in, iPod, AppleTV, or even some other option. In which case the strangeness with the player doesn't seem so strange.
As a workaround, you could layer your 320x240 movie with at 350x240 grey rectangle on the layer behind. That would fix it in QuickTime Player, but it would cause grey bars on either side if you embed into a web page or something like that. -
Hp envy can't right and left click at same time
my hp envy touchpad cant hp envy can't right and left click at same time. i dont know if its a driver. because of that i cant play games like GTA cause i need right click to aim and left click to shoot. is there a solution to this
This question was solved.
View Solution.@gwatanaj ,
Hello and thank you for posting on the HP support forums. Here is a link that you may find useful.
HP Notebook PCs - Using and Troubleshooting the TouchPad or ClickPad (Windows 8)
What you are trying to do may not work with your touchpad. Normally when gaming it is best to use a mouse. The hardware is built different and you would find it easier to work with.
If you need further help please post back. First check out this link.
Advice for asking the "Very Best Question"
As well please include your Full Model and Product Number.
I hope to hear back from you soon.
Thank you again and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP
Maybe you are looking for
-
BPM Error: Timeout condition of pipeline reached- After transporting to Prd
Hi, I am doing Sync/Async BPM scenario. -> Receive message and process it and send to BI and response has to send back to the sender. start ->Receive(Request)> Transformation(Responsemap)>Send(SendtoR/3)->Send(Send Response) ---> stop. It is working
-
Moving playlists f/Nano to Itunes
This afternoon I tried moving songs from another computer to my main Itunes computer. Somehow in the process (which I botched, of course :(), I moved my playlists from the main Itunes computer to the Ipod only. Now I can't move these playlists back t
-
Captivate 8 - How to change to producing "project.json" file instead of a "project.txt" file? Having issues with viewing published projects due to this. Would be thankful fo rany/all advice.
-
I have recently purchased a MacBook Air and want to convert all of my iTunes library from my WinVista Sony vaio laptop. I have around 20GB of music on my current library and ha the laptop for about 4 years. I have followed all of the steps about home
-
How to see the database edition
Hi, How can I know the edition of a database? If I take a query like this: select * from v$version Oracle9i Release 9.2.0.8.0 - Production ....