How to plot this into a line graph?

Hi,
I just found out that my breakeven point in sales turnover is $132,837. But how would I plot that into Illustrator's line graph?
breakeven1.jpg: It's breakeven point is $7,956.
breakeven2.jpg: I'm probably doing it wrong. Do I really need to define both axises like that?
Thanks!

A more interesting question is: Must you use a chart at all to present such a simple fact? No offense, they tear such stuff to pieces over at Junk Charts and Mr. Tufte would call it a Duck. If you insist on using a chart, a differential bar chart or a range chart would be much more appropriate and telling.
Mylenium

Similar Messages

  • Chart Web Part to not plot zeros on a line graph

    Hi all,
    Is it possible to not plot zeros on a line graph?
    I have a line chart with days of the current month along the x-axis and a value on the y-axis. I have a series representing a forecast as a line that will show what the values along for the whole month should be and a second
    line chart series representing the actual. This tells the reader how the actual is tracking against the forecast. The data is based on an excel table.
    Currently when the latest value is set the line skews back to 0. I don't want this shown, I just want it left blank. On excel you can change the zeros to na() and the line graph will not plot, however, if I leave them as na() in the source data, the whole
    column wont be imported in the chart wizard.
    Any ideas?
    Thanks
    Andy

    It's true -- the RangeBar chart type only has two field options (X and Y) while the RangeColumn correctly has an addtional Y field. The RangeBar chart should obviously have two X fields if it's supposed to plot a range, as the name and example image indicate.
    Neither this thread or the one linked has led to an answer. Can this be fixed?

  • Can any one tell me how to break this into separate columns 05/13/2014,"46","48","37","70","74","1","2","121000000.0000"

    Can any one tell me how to break this into separate columns 05/13/2014,"46","48","37","70","74","1","2","121000000.0000"

    Paste your content into TextEdit. Format > Make Plain Text.
    Comand-S to save.
    Command-Click the filename at the top of the TextEdit window. Click on the second line, the name of the folder where you saved the document.
    Select the extension of the document Name in the finder window that is being displayed and replace TXT with CSV.
    Right-Click the csv file and choose Open With > Numbers.
    Numbers will open with a column for each field in your data.
    Jerry

  • Combining multiple plot data into a single graph.

    This is my current data structure:
    1D array of...  (contains 6 plots, each with their own x and y arrays)
    A cluster of two elements
    1D array of I32
    1D array of DBL
    A cluster of two elements
    2D array of DBL  (y points for multiple plots)
    1D array of I32  (x points for the multiple plots)
    I need to combine these into something suitable for throwing at an XY-Graph.  This operation will need to be done three times (for three different graphs), where only the 2D array of DBL is different for each graph (all three 2D arrays are located in the same cluster along with the shared 1D array).  What is the best way of doing this?
    The 1x6 array of clusters contains plots 0-5 for each graph.  Is there a way to hide these plots from the graph's legend?
    Never say "Oops." Always say "Ah, interesting!"

    J.Mamakos wrote:
    I need to combine these into something suitable for throwing at an XY-Graph.  This operation will need to be done three times (for three different graphs), where only the 2D array of DBL is different for each graph (all three 2D arrays are located in the same cluster along with the shared 1D array).  What is the best way of doing this?
    Sorry - this was actually a bit wrong/incomplete.
    Graph1 includes one 2D array of DBL against the 1D array of I32.
    Graph2 includes elements 2-3 of the 1x6 array, and also one 2D array of DBL against the 1D array of I32.
    Graph3 includes elements 4-5 of the 1x6 array, and also one 2D array of DBL against the 1D array of I32.
    This is how I'm doing it at the moment, but am I missing a trick here?  Is there a better way?
    As for my question about hiding any plots (on the legend) that came from the 1x6 array, is this even posible?
    Either that, or is it possible to hide a graph whilst leaving its legend showing?
    Or can one show/hide a graph's label in run-time?
    Never say "Oops." Always say "Ah, interesting!"

  • How to change marker size in line graphs

    Hello,
    I'm using line graph and i show markers for the user know where to see a tooltip. I observed that the line markers are very big and clutter my graph when points are very close one anothers. I would like to make them smaller, but I don't know how to do it.
    Any help is appreciated.
    Thanks,
    Plan.
    <dvt:lineGraph ...>
    <dvt:seriesSet markerDisplayed="true">
    </dvt:seriesSet>
    </dvt:lineGraph>

    >System Preference>General
    this will change text size and associated icon size.

  • How do I get a two line graph to show all the months in the data table and not just every second one?

    My two line graphs covers six months, but only shows three months How can I make it show all six months

    select the chart, then open the Chart Formatter:
    Then click "Axis", then "Category (X)"
    Change the "Label Angle" to "Left Vertical" or "Right Vertical"

  • How to plot power factor as a graph?

    Well guys, I have an array with power factor values and I need to plot this in a graph.
    My problem is because as you know, power factor has positive and negative values so when I plot I need to change my scale to get a better visual.
    I was thinking about:
    0
    0,2
    0,4
    0,6
    0,8
    1
    -0,8
    -0,6
    -0,4
    -0,2
    0
    Anyone have a graph or a code that make its? Because I already tryed here a lot but never get a good solution
    and I think this isn't that difficult! Thanks!

    Hi EduU,
    you can find your own threads by searching in your profile (just click your name) Or you could use the search function to look for "power factor graph"...
    There were other possible solutions than mine, also without separating the values...
    Message Edited by GerdW on 06-01-2010 03:18 PM
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • How to make this into star schema

    Hi experts
    I have 4 tables that I would like to turn into a star schema.
    table1(fact) has a N:1 to table2(dim)
    table2(dim) also has a 1:1 to table3(dim) and 1:1 to table4(dim)
    Is it possible to model this into a star schema where table1 (fact) has a N:1 relationship to all tables (dimensions)?
    I have modeled this in the administration tool and any queries between table1 and table 2 work but they dont if I involved table3 and 4.
    Am unsure how to define 1 to 1 relationships in the physical layer.
    cheers
    Tim

    Tim, could you give us any details on what the dimensions 2, 3, and 4 actually are? Sorry, I think better when I can replace "dim 2" with "person" or whatever.
    In any case, pretty unusual to have 1 to 1 relations like that. Sounds more to me like you have a single fact table, with 1 dimension that is "snowflaked"...but with the snowflakes not representing aggregate levels?
    I'd try just modeling it as a single dimension joining to the fact table (i.e. combine all three physical dimension tables into one logical dimension table). Then maybe break it up in the presentation layer if you really want to split it for the end users?
    Hope this helps,
    Scott

  • How to convert this into alv display and also change parameterstoselect opt

    tables :mara,marc,stpo.
    parameters: p_werks like t001w-werks obligatory,
    p_matnr like mara-matnr obligatory.
    *select-options : p_matnr for mara-matnr obligatory.
    *parameters: p_werks like marc-werks obligatory,
    *p_matnr like marc-matnr obligatory.
    constants c_x value 'X'.
    data: begin of it_comp occurs 0,
    idnrk like stpox-idnrk,
    ojtxp like stpox-ojtxp,
    menge like stpox-menge,
    meins like stpox-meins,
    matkl like stpox-matmk,
    end of it_comp.
    data: w_topmat like cstmat.
    start-of-selection.
    perform explode_assembly.
    end-of-selection.
    perform write_report.
    top-of-page.
    perform print_header.
    form print_header.
    write: /(18) 'Component'(h00),
    (40) 'Description'(h01),
    'Mat.Group'(h02),
    (18) 'Quantity'(h03).
    uline.
    endform.
    form write_report.
    write: / w_topmat-matnr under text-h00 color col_heading,
    w_topmat-maktx under text-h01 color col_heading.
    loop at it_comp.
    write: /
    it_comp-idnrk under text-h00,
    it_comp-ojtxp under text-h01,
    it_comp-matkl under text-h02,
    it_comp-menge unit it_comp-meins under text-h03,
    it_comp-meins.
    endloop.
    uline.
    endform.
    form explode_assembly.
    data: it_stb like stpox occurs 0 with header line,
    it_stb2 like stpox occurs 0 with header line,
    it_stb3 like stpox occurs 0 with header line,
    w_msg(255) type c.
    Explode highest level:
    call function 'CS_BOM_EXPL_MAT_V2'
    exporting
    auskz = c_x
    capid = 'PP01'
    cuols = c_x
    datuv = sy-datum
    knfba = c_x
    ksbvo = c_x
    mbwls = c_x
    mdmps = c_x
    BGIXO = c_x
    MKMAT = c_x
    MMAPS = c_x
    FBSTP = c_x
    FTREL = c_x
    mtnrv = p_matnr
    werks = p_werks
    importing
    topmat = w_topmat
    tables
    stb = it_stb
    exceptions
    alt_not_found = 1
    call_invalid = 2
    material_not_found = 3
    missing_authorization = 4
    no_bom_found = 5
    no_plant_data = 6
    no_suitable_bom_found = 7
    conversion_error = 8
    others = 9.
    if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
    into w_msg.
    write: / w_msg.
    exit.
    endif.
    Don't process documents
    delete it_stb where idnrk is initial.
    Don't process valid from furure:
    delete it_stb where datuv >= sy-datum.
    Explode phantom assemblies up to last level
    *do.
    it_stb2[] = it_stb[].
    *delete it_stb2 where dumps is initial.
    *if it_stb2[] is initial.
    *exit.
    *endif.
    *delete it_stb where not dumps is initial.
    delete it_stb where VPRSV <> 'S' OR MMSTA = '61'.
    loop at it_stb2.
    call function 'CS_BOM_EXPL_MAT_V2'
    exporting
    capid = 'PP01'
    auskz = c_x
    cuols = c_x
    datuv = sy-datum
    knfba = c_x
    ksbvo = c_x
    mbwls = c_x
    mdmps = c_x
    FBSTP = c_x
    FTREL = c_x
    mtnrv = it_stb2-idnrk
    werks = p_werks
    tables
    stb = it_stb3
    exceptions
    alt_not_found = 1
    call_invalid = 2
    material_not_found = 3
    missing_authorization = 4
    no_bom_found = 5
    no_plant_data = 6
    no_suitable_bom_found = 7
    conversion_error = 8
    others = 9.
    if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
    into w_msg.
    write: / w_msg.
    else.
    delete it_stb3 where idnrk is initial.
    delete it_Stb3 where sobsl = 50.
    loop at it_stb3 .
    multiply it_stb3-menge by it_stb2-menge.
    modify it_stb3 transporting menge.
    endloop.
    append lines of it_stb3 to it_stb.
    endif.
    endloop.
    *enddo.
    Build table of components collecting the same components from
    all levels
    loop at it_stb.
    it_comp-matkl = it_stb-matmk.
    it_comp-idnrk = it_stb-idnrk.
    it_comp-ojtxp = it_stb-ojtxp.
    it_comp-menge = it_stb-menge.
    it_comp-meins = it_stb-meins.
    collect it_comp.
    clear it_comp.
    endloop.
    ENDFORM.
    using this i got the bom explosion and also i tried to use the following code
    to diplay alv diplay,but i got the errormsg,
    here  i got only one material input,instead of i want to use
    select options to from to ,if i give 1 to 10 material
    ouput is
    material 1
    descripn
    bom and components
    materials 2
    desc
    bom comp
    TYPE-POOLS : SLIS.
    DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
    DATA : WA_FIELDCAT_LN LIKE LINE OF IT_FIELDCAT.
    DATA : IT_EVENTCAT  TYPE SLIS_T_EVENT.
    DATA : WA_EVENTCAT_LN  LIKE LINE OF IT_EVENTCAT.
    DATA : IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
    DATA: S_COL_POS TYPE I.
    DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
    DATA : WA_FIELDCAT_LN LIKE LINE OF IT_FIELDCAT.
    DATA : IT_EVENTCAT  TYPE SLIS_T_EVENT.
    DATA : WA_EVENTCAT_LN  LIKE LINE OF IT_EVENTCAT.
    DATA : IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
    DATA: S_COL_POS TYPE I.
    DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
    DATA : WA_FIELDCAT_LN LIKE LINE OF IT_FIELDCAT.
    DATA : IT_EVENTCAT  TYPE SLIS_T_EVENT.
    DATA : WA_EVENTCAT_LN  LIKE LINE OF IT_EVENTCAT.
    DATA : IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
    DATA: S_COL_POS TYPE I.
    FORM BUILD_FIELDCATALOG.
      PERFORM BUILD_FIELDCAT USING 'MATKL'.
      PERFORM BUILD_FIELDCAT USING 'IDNRK.
      PERFORM BUILD_FIELDCAT USING 'OJTXP.
    PERFORM BUILD_FIELDCAT USING 'MENGE'.
    PERFORM BUILD_FIELDCAT USING 'MEINS'.
    ENDFORM.
    FORM TO BUILD IN FIELD CATALOG FOR ALV FORM
    FORM BUILD_FIELDCAT USING L_FIELDNAME LIKE DD03L-FIELDNAME S_TEXT LIKE DD03P-SCRTEXT_M.
      CLEAR WA_FIELDCAT_LN.
      ADD 1 TO S_COL_POS.
      WA_FIELDCAT_LN-REF_TABNAME  = 'IT_COMP'.
      WA_FIELDCAT_LN-FIELDNAME    = L_FIELDNAME.
      WA_FIELDCAT_LN-SELTEXT_M    = S_TEXT.
      WA_FIELDCAT_LN-COL_POS      = S_COL_POS.
      WA_FIELDCAT_LN-QFIELDNAME   = SPACE.
      WA_FIELDCAT_LN-HOTSPOT      = SPACE.
      WA_FIELDCAT_LN-JUST         = 'R'.
      APPEND WA_FIELDCAT_LN TO IT_FIELDCAT.
    ENDFORM.
    FORM TO BUILD IN FIELD CATALOG FOR ALV FORM
    FORM DATA_DISPLAY.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_HTML_END_OF_LIST       = ' '
      I_STRUCTURE_NAME                  =
      I_BACKGROUND_ID                   = ' '
       I_GRID_TITLE                      = TEXT-001
      I_GRID_SETTINGS                   =
      IS_LAYOUT                         =
       IT_FIELDCAT                       = IT_FIELDCAT
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
      TABLES
        T_OUTTAB                          = IT_COMP
       EXCEPTIONS
       PROGRAM_ERROR                     = 1
       OTHERS                            = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    GIVE ME SOLUTION FOR THAT ON, VERY URGENT
    THANKS IN ADVANCE
    regards
    ds

    Hi
    declare select-options instead of parameters
    for converting a report to ALV
    create a field catalog.
    for this two option declare a itab with       
    fcat    TYPE slis_t_fieldcat_alv
    and pass the field name,descr etc to fcat and append the same.
    or create structur same as your itab and pass the same with FM
    'REUSE_ALV_FIELDCATALOG_MERGE'
    use either <b>reuse_alv_grid_display or reuse_alv_list_display</b> .
    and pass the itab.
    thanks
    Shiva

  • Can't plot image into WDT waveform graph

    I'm trying to plot an icon onto a WDT waveform graph but it doesn't seem to be working. The image plots while using the default (array of doubles) data type, but goes missing when I change to WDT. As far as I can tell, the two graphs are the same except for their data type.
    Am I missing a step or is this a LabVIEW bug?
    Attachments:
    WDT problem.vi ‏26 KB

     I was able obtain the icon on the WDT waveform graph in your code by changing the property selected on its property node to PlotImages.Middle.

  • How to make this into a SWC?

    I have 1 movie clip and four buttons, along with a layer for actionscript. selecting evrything and going "convert to symbol - movie clip" breaks the application as the code cannot find the specified componets such as button 1, 2,3,4 and the movie clip.
    How do I take this project and make it into a swc so I can use it in flash builder? Publishing as is, as a swc, doen't work as I cannot then call it in flashbuilder because I have no class to call.

    select the on-stage objects only and convert to a movieclip symbol.  then copy and actionscript in the actions panel, go to your movieclip's timeline, click the first frame and paste that code into the actions panel.
    now find your new movieclip in the library, right click and click export swc.

  • How to plot a olap time in graph in wad

    hi all
    i want to design technical content queries in wad but facing problem in ploting time in x or y axis.i tried all option but it is not working out..
    i am using time scatter graph..
    thanks
    shalini

    Hi DFGray.
    Thanks for your post.
    If you look at the attached file, how do I make the changes that you describes. Maybe you could make the changes in the vi and post it to me?
    I just think that I have be done all the things that you suggests but still I can't make it work. 
     - Clausny
    Attachments:
    starttimeVI.vi ‏27 KB

  • Tabular report, how to split row into two lines per record

    Hi, I have a tabular report based on a collection. The collection has 15 fields and appears horizontally across the screen. I would like to have a break after the 5th column so that each row is on two lines instead of one. Is this possible...any information would be helpful.
    a shortened query is: and I would like the break to be between c028 and c029.
    thanks
    Karen
    Select apex_item.select_list_from_lov_xl
    (28,
    c028,
    'GEARS',
    'style="width:200px;background-color:#FBEC5D; "'
    || 'onchange="f_set_casc_gear(this,f29_'
    || LPAD (seq_id, 4, '0')
    || ')"',
    'YES',
    '0',
    '- Select Gear -',
    'f28_' || LPAD (seq_id, 4, '0'),
    NULL,
    'NO'
    ) gear_code,
    apex_item.select_list_from_query(29,
    c029,
    'select lma_desc e, lma_code r
    from lobster_mgmt_area
    where 1 in (select 1 from gears where gear_code = '
    ||nvl(c028,0)
    ||' AND (type_code in (''005'') and category_code in (''160'')) OR ('
    ||nvl(c028,0)
    ||' in (''130'')) ) order by lma_code ',
    'style="width:75px"',
    'YES',
    '0',
    '- Select -',
    'f29_' || LPAD (seq_id, 4, '0'),
    NULL,
    'NO') lma_code,
    apex_item.text
    (30,
    c030,
    6,
    NULL,
    'style="width:50px;background-color:#FBEC5D;"'
    ) gear_quantity
    from collections where collection_name = 'EFFORT_C'

    Hello Karen,
    >> and each field needs to be updateble ( concatenating two fields does not allow for that).
    Did you notice the ‘&lt;br />’ component, as part of the columns concatenations?
    The following example is using the same principle – every two updatable column, from the employees table, are sharing the same tabular form row - http://htmldb.oracle.com/pls/otn/f?p=22710:420 . The report query is:
    select apex_item.text(10,first_name)||'<br />'||apex_item.text(11,last_name) col01,
    apex_item.text(12,phone_number)||'<br />'||apex_item.text(13,email) col02,
    apex_item.text(14,salary)||'<br />'||apex_item.text(15,commission) col03
    from employeesThe same principle is being used to define custom headings.
    Hope this time it will be more clear.
    Regards,
    Arie.

  • How to Map This into SAP

    Kindly guide me on how to model following scenarios into SAP;
    Please Guide
    Characteristics      
    Length -                         L
    Width -                         W
    Height -                         H
    Glue Flap-                         K1
    Overlap     -                   K2
    No of UPS CD-         K3
    No of UPS MD-         K4
    Side lay in MD 1-         K 5
    Side lay in MD 2-         k16
    Front Lay in CD-         K 6
    Backside Margin in CD-  K 7
    Lamination Margin         K 8
    Board Cost          K9
    Ink GSM                         K 10
    Ink Rate                         K 11
    Lamination 10 PET         K 12
    Price of PET         K 13
    Lamination Glue GSM    K 14
    Price of Glue          K 15
    Wastage allowance         K 17
    Board GSM         K 18
    Variable     formula
    V1     =(W + K2)/2
    V2     =(WHK2)
    V3     =(L+W)*2 + K1
    V4     =(WHK2)*K3
    V5     =((lW)*2K1)* k4
    V6     = if no of K3 > 3 then 10 else 5
    V7     =V4 + V6 + K6 + K7
    V8     =V5 + k5 + K16 +k8
    V9     =(2825.40.9)/V7
    V10     =(4025.40.88)/V8
    V11     =K3 * K4
    V12     =(V4 * V5) / V11
    V13     =V12 * K10 * K11
    V14     
    V15     =(V7 * V8) / V11
    V16     =1000/  V11* V7 * V8 / 1000000 * k18 / 1000
    V 17     = V16 * K9
    V 18     =( V13 + V17)*(100+k17)/100
    V 19     =( V13 + V17 + V18)
    V 20     = k12 * 1.4
    V 21     = V15 * V20
    V 22     = K13 * V21
    V 23     = k14 * V15
    V 24     =k15 * V23
    V 25     = (V19 +V22 + V24)* K17/100
    V 26     = V19 + V22 + V24 + V25

    Dear Dipak,
    Thanks a lot
    #1. I have a material "x"
    #2. Characteristics of "x", is described by L,W,H, k1 to k18
    #3. The attributes of these characteristics are dynamic
    #4. The parameters & costs are defined by formulae "V" series - V1 to V26
    #5. "Acceptance" of "x" is based on suitable end values from formulae - V1 to V26
    #6. Currently we guys are doing the modelling based excel sheets.
    #7. Same process, we want in SAP
    #8. So that, once attributes are frozen, the model or specs or bom is released for procurement / production
    I HOPE, I HAVE EXPLAINED CLEARLY.
    Welcome with healthy criticism
    Warm Regards
    Ramana

  • How to implement this C code line: for ( int i = 0; i G_ReadLen; i = i + 2 )

    I want to implement the following C++ code in labview but i cannot make or loop to increase by two
    int j = 0; for ( int i = 0; i < G_ReadLen; i = i + 2 ) {
    BYTE AD_H = ByteArray.GetAt(i);
    BYTE AD_L = ByteArray.GetAt(i + 1);
    ValueArray[j] = AD_H << 8;
    ValueArray[j] = ValueArray[j] + AD_L;unsigned long Temp = ValueArray[j] >> 12; Volts[j] = ((float)ValueArray[j]) * 0.0048875;Message.Format("%X , %X - %X, -- %d, +%.3f Volts", AD_H, AD_L, ValueArray[j], ValueArray[j], Volts[j]); m_output_ep1i.InsertString(0,Message);
    j = j + 1;
    Thanks
    Solved!
    Go to Solution.

    Your code will not work.
    You are replacing elements of an empty array. A no-op in LabVIEW.
    Besides there is a lot easier way to do this:
    I just hope this is not a homework assignment.
    And for completeness sake here is Mikes solution (seen below):
    Ton
    Message Edited by TonP on 11-14-2008 12:55 PM
    Message Edited by TonP on 11-14-2008 01:03 PM
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!
    Attachments:
    Read as U16.png ‏2 KB

Maybe you are looking for