How to plug in HDMI cable

I have a Macbook Pro, bought February 2011, and want to hook it up to my TV via HDMI cable. All I can find are Mini DisplayPort to HDMI cables, but I don't see a Mini DisplayPort on my Macbook Pro. Is there not a way to use the new Firewire port to hook my computer up to my TV via HDMI, or any other way?

Your MBpro has the new Thunderbolt connector. The MiniDisplay Port adapter plugs into that. So, you need a MiniDisplay Port to HDMI adapter and a HDMI cable.
Regards,
Captfred

Similar Messages

Laptop "auto-mute" when i plug in HDMI cable

Hi,
I am facing some problem with my laptop audio... have been using it connected to my LCD TV for the past couple of months. Suddenly the mute button cannot be disabled whenever i plug in my hdmi cable.
once i remove it, it automatically unmute.
Help please!
thanks!

I have the EXACT same problem, did you ever get a solution?
HP Envy 17
ATI Mobility Radeon HD 5850 1GB DDR5

When I plug an HDMI cable into my Macbook Pro, it just turns itself off. Help?

So I am trying to hook up my non-retina Macbook Pro to my HDTV to use it as a higher quality monitor, but one of two things always happens. When I try pluggingg in the HDMI, then turning on my Mac, it fails to detect the display. If I plug in the HDMI when the Mac is already on, my laptop will just turn itself off immediately. If anyone could tell me what I'm doing wrong, or if i need to get something else, it would be greatly apreciated.

I am wondering if you may have some debris in the output port where the plug is not allowed to be fully inserted. If not, take to an Apple store genius bar for a free evaluation.
Ciao.

HDMI cable- plug into stereo instead of tv?

Can I plug the HDMI cable into my stereo receiver instead of the tv? I ask because the sound quality with the digital optical cable is very poor when I shut off tv and sound only comes out of the speakers? What should i do ??
Thanks

HDMI audio and Minis can be quirky at times.
Have you changed the order of power-up?
I found in my system, I need to power up the TV,
then the receiver, then boot the Mini.
Also, if using some other source and then switching
back to the Mini, I end up in stereo only and have to
reboot the Mini to get surround pass tthrough capability
back.
HDMI audio in general is at times quirky as I have seen
similar comments around and about for all types of
equipment.

Solution how to deal with cheap HDMI cables and some VGA adapters.

I've purchased cheap HDMI cable which I couldn't force to work. Basically after plugging in the screen on my mac blink blue for a second, but then everything is going back to normal, and screen seems to be not recognized. I checked the cable with my friend's mac, and it was working just fine, so I thought hey something is wrong with my mac, either the MiniDisplay Port or Lion (10.7) has some bug (friend is working on (10.6).
I was experimenting with VGA adapter and it showed that MiniDisplay Port is fine, unfortunatelly it is painfull because quality is lower, and audio has to be plugged in separately. Accidently I've plugged in HDMI while audio was connected regular way and it started. So I figured out that probably grounding in those cheap cable is not sufficient for some macs. So step, by step solution:
1. Plug in HDMI cable to your TV
2. Switch TV to the right setting (display given HDMI port)
3. Connect audio cable to your TV
4. Connect audio cable to your MAC
5. Connect HDMI cable to your mac.
6. Image should appear on your TV, you can change resolution if you like
7. To enable sound on TV go to System Preferences, choose Sound, Output tab, and choose your HDMI connected TV.
While testing my VGA adapter which was working fine but I never could make it work with my Panasonic TV, I found a way around. First you have to connect to regular monitor, or TV which is working, and then switch to TV. The reason why it is not working straight is probably to high resolution that mac is trying with this TV. In points:
1. Plug VGA adapter to monitor or TV that you know it is working.
2. Plug adapter to your mac
3. With adapter connected to mac switch VGA cable to your panasonic plasma tv.
I hope this soultions will help some of you.
Enjoy!

Templeton Peck said:
"or you could just save yourself the trouble and buy cables and adapters from a reputable brand."
Well, I got mine directly from the Apple Store in Amsterdam and I got the most expensive one they had.. iwire.
Still stopped working after 4 weeks! (In Holland you have only 14 days to bring back stuff)
so careful what you say.

Audio Driver Update, Will not play audio via HDMI cable now...

I just did a driver update for the realtek audio on my Y70 touch. When I plug the HDMI cable into the receiver (TV & speakers), it will still transfer the image to the TV and reformat the screen, but now the audio will not play unless I make the room speakers the default audio instead of the laptop speakers... That is just a real PITA to keep switching the default every time I wanted to do something on the big screen with my computer. Any advice on how to fix that? Preferably without rolling back the driver that was 130MB+ of a download & install that required to restarts to apply. Thanks, Joe

I haven't had mine long but I always have to do that with my tower system. (switch playback device for sound). I played a movie on the Z70 last night and go audio without doing anything (so it is different) but the sound level was low even though I checked the outputs were set to 100% HDMI audio required I turn up the sound at the TV end a lot to hear it. I figure I am missing something but did not want to spend the time troubleshoot, rather tha watch the Netfix movie.

No sound on TV when using HDMI cable from MAC

Hi
Anyone any ideas why I cant get any sound on the TV when I plug the HDMI cable in - It only comes thru on my MBP.
Also, I have to scroll the mouse off screen and grag any windows off screen in order for them to display on the TV .... It must be smething to do with resolution or something...But I cant work it out
Any help gratfully received
Thanks
Emma

To get sound you will have to tap into the audio output port. This will require a 'Y' connector with a compatible plug that fits the port and splitting into the two audio channels with RCA connectors. The image shows a possible type you can use, but you would still need two male/male RCA connector extensions to your TV. A little search on the Internet should enable you to identify the most practical way of connecting audio.
The ideal set up is to use the extension shown with a Y connector with male out put connectors.
Ciao.

I just bought apple tv and would like to set it up for my family for christmas. i have a samsung tv and yamaha receiver. where do i plug in hdmi? i assume into receiver but not sure. also, plug is on back of receiver so much get behind all equipment

i just bought apple tv and would like to set it up so it works right away. i have samsung tv and yamaha receiver. do i plug hdmi into receiver? i assume plugs are in back of machined so i have to get behind all electronic equipment? does that make sense?

Welcome to the Apple Community.
If your receiver is connected to your TV by HDMI and has a spare HDMI input port, then yes plug the HDMI cable from the Apple TV into your receiver.
If that's not possible the HDMI lead from the Apple TV can go straight to the TV and you can connect the receiver to the Apple TV with an optical audio cable.

HDMI Cable to Mac Cumputer

I have a Camcorder with HDMI port connection. How can I connect HDMI Cable to a Mac Computer?

Hi there,
You may want to double check the sound output device and make sure that your TV is selected.
OS X Mountain Lion: Change your computer’s sound output device
http://support.apple.com/kb/PH11235
-Griff W.

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

How do I get my IPad 2 images onto a regular TV? I have the plug from the apple store, and the HDMI cable. The TV recognizes a devise, but no image on TV!

How do I get my IPad 2 images onto a regular TV? I've got the converter plug for HDMI from the apple store and an HDMI cord, etc. I've plugged everything in and the TV recognizes a devise, but no images on TV...help!

Hey Anndog,
Thanks for the question. I understand you wish to connect your iPad 2 to an HDMI TV. The following article provides some great information on how to do this, along with troubleshooting information if you are experiencing issues:
iOS: About Apple Digital AV Adapters
http://support.apple.com/kb/HT4108
Thanks,
Matt M.

How to connect macbook pro to panasonic tv with hdmi cable

How to connect macbook pro to panasonic hd tv with hdmi cable

Hi m,
It depends which MPB you have and the inputs on the TV. The following assumes your TV has an HDMI input which will work with a computer.
This is if your MBP is from April 2010 or newer:
http://support.apple.com/kb/HT4241
First connect the adapter to the MBP and the HDMI cable from the adapter to the TV, then go to System Preferences > Sound > Output > select HDMI.
Or if your MBP is older than that and you have a Mini DisplayPort, you can use something like this: http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/
If it's older than that, for video you need a DVI or mini DVI to HDMI or whatever input your TV has. For audio, you need a 3.5mm stereo mini plug to RCA or optical (Toslink), depending on what audio input your TV has.

How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.

How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.
I've tried plugging the hdmi into the TV directly and the receiver.
I get video every time. HBO to Go , Xfinity, ABC, Youtube, etc...
just no audio. Any suggestions?
I've tried starting the apps then plugging in the hdmi cable.
I never tried this before I upgraded to IOS 5.

Claudiamil-
I had not tried it with mine since upgrading to iOS 5, so I just did. I'm using a small Vizio HDTV. I did not try YouTube, but did try several videos and musical numbers. In all cases there was sound, including stereo when the source had it.
I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down. Dah*veed's suggestion to reset may be what you need.
Fred

How do i get my surround sound to work with my laptop while using a hdmi cable for the video

I have a Sony surround sound system hooked up that works great. My X-Box 360 works with it and I can get my HP G60 to play audio files through the surround sound system with a red and white audio jack plugged into the back of my surround sound receiver, the red and white audio cord goes to a 3.5mm headphone jack that i plug into the headphone plug on the front of my computer. The problem occurs when I hook my HDMI cable into my computer and connect it to my Samsung Flat screen, the HDMI sound takes over and wont allow the sound to go through the headphone jack. My tv does not have any audio output plugs, and my suround sound reciever doesnt have an HDMI input. Is there a setting on the computer that will allow me to over ride the HDMI sound and direct the sound through the head phones? or is there an app or tool that will allow my laptop to recognize my suround sound system plugged into my laptop? I have been to best buy, walmart, radio shack and even my local car audio store to ask about this issue and everyone has a different solution, and so far none of them have worked???????? sincerley frustrated! please help!?!?!?!?!?!?!?!?

Hello JaeRoc48,
I understand that the sound is not working.
Go to start.
Type Sound.
Select sound.
Select speakers as default.
Click OK.
Let me know how everything goes.

How can I connect my Powerbook or iPad Retina via HDMI cable to 4K digital video camera to be a "control monitor"

How can I connect my Powerbook or iPad Retina via HDMI cable to 4K digital video camera to be a "control monitor"

That won't work with the iPad, unless maybe there's a "control monitor" app somewhere.

How to plug in HDMI cable

Similar Messages

Maybe you are looking for