How to populate customized message from JNLP?

I have java applications running with different JREs. Is there a way to populate message to remote users from the JNLP when a required JRE is not found on desktop. I'm having trouble finding all the JREs installed on the client desktop, specifically JRE 131 and below.
Thanks in advance

That isn't possible to my knowledge. The moment javaws is invoked it will check if the jre you have is sufficient for the program and that isn't a process which cannot be customized afaik.

Similar Messages

[NIO] custom messages from the netwerk

Hi you all,
Yes this is another NIO question :)
Ok I have the following situation, I've got a NIO server which reads custom messages from the netwerk. These messages consists of an interger and then a variable byte array.
int -> length of the message
byte array -> data of message (could be anything)
On my local network it works fine because I don't have to worry about my read() not reading all the bytes the client send. So I can just use the ByteBuffer.getInt() to read the int and create a buffer for the byte array etc.
But... on the intenet there is no garentee all the bytes are read. So if only the first 3 bytes of the whole message are in my read buffer and I call the getInt() I'll get an exception.
How would you fix this? The only garentee is that I will always have 1 byte (except when a connection is closed or other error)
I could create of small bytebuffer of 4 bytes and wait till it's full and then read the int, but what if I also have a length that can consist out of like 5 or 6 bytes... and I don't know by forehand if it's 4 or 5 or 6... or just 2...
Any idear would be welcome... or even code if you have the time...
Grtz
David

Use ByteBuffer[] { lengthField, dataField } as a structure for messages. Set the size of the length field statically as part of the protocol. Set dataField's limit to 0. Do readsinto this structure (there is an appropriate read method for an array of ByteBuffers) until there lengthField.remaining() == 0. At this point, read the int/long/whatever from lengthField and set dataField's limit to that. Then do the reads necessary until dataField.remaining() == 0. At this point, you'll have your whole message.
The reason that I say "do reads" is that on any particular read you may only get one byte's worth of data. Therefore you have to hold this partially completed message in some variable, or as an attachment to the SelectionKey which was selected. As the Channel continually gets selected for OP_READ, you can do the above steps, and if there's not enough left in the channel, you just leave the message partially completed for the next OP_READ. Once it's complete, you do what you need to with it, and replace the attachment or variable with an empty ByteBuffer[] of the above format.
--Dan

How can i remove messages from faces context

hi
how can i remove messages from faces context
with regards
shannu sarma

I'm also looking to find a way to remove message/s from FacesContext, and so far I've not been able to do this.
The issues described below (if you have the patience to understand it) may uncover some JSF issues when combining different functionalities in JSF to come up with a solution.
I have a requirement to display (let's just say error) messages in a message board. I do this in 2 steps: field-level validations are done first, and if all corrected (by the user), I do multi-field-level as well as business logic validation after model update (the way JSF seems to be designed to handle different types of validations). Let's say I have a combination of 3 combo-boxes that are dependent on one another. Selection from (1) requires dynamically filtering and setting a list for two and that in turn requires dynamically filtering and setting a list for 3, so the first two have valueChangeListener (try doing this in JSF!!!, I had to hack my way through to set this up with JSF, but that is not the issue). I have business rules associated with items within combo (1) and other entry fields entered by users (i.e. for simplicity let's just say, if material 'chain' is selected from combo 1, I should set combo (2) and (3), and validate that user entered at least four in # used entry field). Let's say I have a table with many rows of above combination of combo-boxes specified. Again for simplicity, assume we only have business rule violations (not field-level that would not go through model update):
* User selects many combination of entried before submit (with no field-level error)
* Business rules are checked and messages added to FacesContext and displayed in a message board
* Next, all these messages disappear from the view when selecting any item from any combo-box (with valueChangeListeners attached to them) - 2 reasons: 1. a new FacesContext is created per valueChangeEvent 2. Business model update does not happen (so we don't generate these messages again and add them to FacesContext, it is not efficient to do so anyways)
* we would like to display all those business logic validation messages so the user could correct them all (and not lose them by any combo-box selection)
* As a workaround, I add these messages to session (which is another issue, since FacesMessages are not serializable) at the end of business logic validation, and retrieve and display them by (a.) forcing combo-boxes go through (field-level) validation, (b.) adding a new hidden field at the end of all fields in JSP page with a custom-validator that all it does is to get messages saved to session (from the last business logic validation) and add them to the FacesContext - this ensures that messages are not lost due to combo-box selections
* The problem is that when user submits (to validate the business rules again), since the old Business validations messages are added to FacesContext at the end of field-level validation, I need to clear them, before adding the newly generated messages
* But....I can't remove messages from FacesContext
So here's a reason for this 'needed' functionality, based on whatever is available (as of JSF 1.1.01). Is there a better way to this, I'll be delighted to hear it (as I have tried different solutions myself with above combination of issuses), and have wasted some time trying to work-around the issues I've faced using JSF (in every one of those ways I've tried) ....part of which is described here...
Thanks...

HT201269 how do i transfer messages from one iphone to another

how do i transfer messages from one iphone to new iphone

"There is nothing there when I go to it."
What does "there" mean? What does "it" mean?
If you saved a backup in iCloud or iTunes, and then restored that backup to a newer device, you would see the messages ... assuming the newer device uses the same telephone number and cellular carrier as the old one did.

How do you export messages from Ovi Suite?

As the title says, how do you export messages from Ovi Suite?
I know how to export messages from Nokia PC Suite, but it doesn't seem to be possible in the new Nokia Ovi Suite.
Here is how I would do it in the Nokia PC Suite.
1. I click the Messages icon to open Nokia Communication Center.
2. I click on the Messages option on the left pane to view only messages.
3. In the main window I mark the messages I want to export.
4. Then I go to File menu and chose Export.
5. Choose destination folder and I'm all set to export my messages from my Nokia.
I can chose between the formats CSV and VMG (vMessage) for export. If more than one message is marked only the CSV format is available. But what you can do to export several messages in the VMG format is to mark them all in the main window and press CTRL+C or right click and chose Copy to copy them all to RAM memory. Then all you have to do is create an empty folder on the desktop and paste them in there by pressing CTRL+V or right clicking and chosing Paste.
That's all there is to it, using Nokia PC Suite. So how do you do this in Nokia Ovi Suite? You don't, right?
And this **bleep** Ovi Suite is supposed to replace PC Suite?
Thank God I won't be needing neither of them much longer. I am switching to Android and HTC. Good luck with Ovi, the Ovi Player, the Ovi Suite, the PC Suite, the Symbian, the S60, the Symbian^1 (S60 5th edition), the Symbian^3, the Symbian^4 and what not.

I believe OVI took a step in the right direction with this option. I also believe it was made available due to the fact that OVI Suite cannot take a huge number of messages altogether. This option was made available so that the messages could be backed up.
However, I'd like to suggest the following, if possible.
1. Make Nokia OVI Suite be able to handle a huge number of messages.
2. Have the option to export only selected messages.
Nokia 701 Dark Steel on Belle FP2

How to delete the messages from SXMB_MONI which are already cancelled .

Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.

Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

How to delete the messages from JMS Queue

Hi,Can anybody help how to delete the messages from the JMS Queue.Thanks in advance.

You can dequeue the message using a JMS client or delete it using Weblogic Admin Console -
http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e13952/taskhelp/jms_modules/queues/ManageQueues.html
Regards,
Anuj

TS1347 Need to know how transfer contacts and messages from an Iphone 3Gs to an iPhone 5s

how transfer contacts and messages from an Iphone 3Gs to an iPhone 5s

http://support.apple.com/kb/HT1766

How to find delete message from iphone

how to find delete message from iphone?

I am afraid that I don't think there is a way to do this.

How do I stop messages from my i phone coming thru on I pad as well ?

How do I stop messages from my i phone coming thru on I pad as well ?

Settings>Messages>Send and Receive at>You can be reached by iMessages at>uncheck the phone number on the iPad and check your Apple ID as the contact at address.

How do i delete messages from i phone and clear the name/number from appearing in my message list?

How do i delete messages from i phone 4 but make sure the line/number/details clears from my list on messages so i don't have a long list in there??

To delete a conversation, you can either swipe left to right, and delete the conversations, or use the edit button. If you have a conversation selected, edit will allow you to delete specific messages.

How can I show message from server?

Has anyone idea, how can I show message from server? I want to show message after some files are uploaded via FTP.

Hi,
You can use OPEN DATASET for this purpose.
Try this code:
<b>****************************************</b>
Data:
A_FILE TYPE RLGRAP-FILENAME,   "Application server
P_FILE TYPE RLGRAP-FILENAME.   "Presentation server
DATA: BEGIN OF ITAB OCCURS 0,
LINE TYPE STRING,
END OF ITAB.
DATA: FILENAME TYPE STRING.
FILENAME = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                = FILENAME
TABLES
    DATA_TAB                = ITAB[]
EXCEPTIONS
    FILE_OPEN_ERROR         = 1
    FILE_READ_ERROR         = 2
    NO_BATCH                = 3
    GUI_REFUSE_FILETRANSFER = 4
    INVALID_TYPE            = 5
    NO_AUTHORITY            = 6
    UNKNOWN_ERROR           = 7
    BAD_DATA_FORMAT         = 8
    HEADER_NOT_ALLOWED      = 9
    SEPARATOR_NOT_ALLOWED   = 10
    HEADER_TOO_LONG         = 11
    UNKNOWN_DP_ERROR        = 12
    ACCESS_DENIED           = 13
    DP_OUT_OF_MEMORY        = 14
    DISK_FULL               = 15
    DP_TIMEOUT              = 16
    OTHERS                  = 17.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
OPEN DATASET A_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP AT ITAB.
TRANSFER ITAB-LINE TO A_FILE.
ENDLOOP.
<b>*****************************************</b>
Hope this helps,
Regards,
Pragya

How to transfer contacts, messages from Android Samsung glaaxy, htc, lg to computer

If the back-up utility just doesn't do what you need it to then you're going to have to divide the back-up process into separate parts, starting with your contacts. learn how to transfer messages, contacts from samsung galaxy, htc, lg to computer.and print text messages from samsung galaxy phone. There are several third-party SIM back-up programs that let you stick your SIM card into your PC via an adaptor and back up all your contacts and text messages from Android phone to computer, and print text messages from samsung galaxy phone.This first backup copy is all well and good, and you'll be thankful you have it if anything goes wrong, but it's not likely to be updated too often. So for your second backup, I recommend choosing a method that will update more frequently to ensure you have all the most recent photos, texts, settings, and everything else stored on your Android.learn how to transfer messages, contacts from samsung galaxy, htc, lg to computer.and print text messages from samsung galaxy phone.
After installation of applications on computer and Android phone we need to make important change in the settings of the application on the computer. Settings can be found in File/Settings, here in the connection section we need to select the phone type as ‘Phone with Google Android-OS’, in connect via… select ‘Autodetect’ option and finally click OK.
I recommend use Vibosoft Android Mobile Manager for making the first backup of your Android data be a copy of the SD card you keep on your computer. I'll list the basic steps here, but note that, with Android devices, there may be slight variations in the exact wording or steps and learn how to transfer messages, contacts from samsung galaxy, htc, lg to computer.and print text messages from samsung galaxy phone.
1.Connect your Android device to your computer (Windows or Mac should both work) via the USB cable.
2. On your Android, pull down the main menu (swipe down from the top of the screen) and select "USB connection."
3. On the next page and preview text messages, contats
Using this application is very simple and backup procedure is also very easy. It is not necessary that only USB cable is required for connecting an Android phone to the computer but we can also use Wi – Fi connection or we can also use Bluetooth connectivity options. There are two parts of the software; they are Android client application and a server application that will be installed on a personal computer. Once the applications are installed simply follow the instructions:learn how to transfer messages, contacts from samsung galaxy, htc, lg to computer.and print text messages from samsung galaxy phone.
Leran: http://www.vibosoft.com/mobile-phone/print-out-text-messages-from-android-mobile-phone.html

If you want to Transfer contacts, messages from Android Samsung galaxy, htc, lg to computer,it is not difficult to solve it. Follow the following steps:First, connect your Android phone to your computer.Then go to the notifications area on your Android phone and tap on the one that says USB something.Then click on Mount. Then, when it appears on your computer's screen, select the action that you want to do.Finally,To disconnect your phone, just go to the notifications area on your Android phone and tap on the USB sign to disconnectHowever,it is slow and complex,If you want to directly transfer contacts from Android Samsung galaxy, htc, lg to computer,You can use iStonsoft Android File Manager and iStonsoft Mac Android File Manager to transfer contacts, messages from Android Samsung galaxy, htc, lg to computer and more quickly,you will very quickly to solve it,,it is a very powerful tool,and very popular,You can also use its other functions, such as Transfer text message/music from Android to Computer,copy/save contacts from Android to Computer.etc,Hope this helps!!! resource:How to Transfer Text Messages from Samsung Galaxy to Computer

How can I divert messages from my MacBook Air to my iPhone

How can I divert messages from my MacBook Air to my iPhone

Use Export in iPhoto...
See this Discussion...
https://discussions.apple.com/message/15814652#15814652

How to populate customized message from JNLP?

Similar Messages

Maybe you are looking for