How to populate "N/A" or "#" in KFs

Hi,
Can any one tell me how to populate "N/A" or "#" in KFS. I want to use a condition for ex:
If
Var1 = 0 then the KF1 = "#"
If
Var1 = 10 then KF1 = 10
I want to know if we can do it in the Front end (Bex) and not populate a KF in the data target.

Hi Narendera,
step_2 is a PAI event that is process after Input,
when your query Q1 does not have any customer exit variable then it will not go in the step_2 code, your Q2 queyr is containing the code for customer exit varibale so it will run for that but of-course after the input.
In any case it cannot run before that. I suggest you to put the break-point in your code and then run the query may be that can help you out.
I_STEP = 1: Call takes place directly before variable entry
I_STEP = 2: Call takes place directly after variable entry. This step is only started up when the same variable is not input ready and could not be filled at I_STEP=1.
·I_STEP = 3: In this call, you can check the values of the variables. Triggering an exception (RAISE) causes the variable screen to appear once more. Afterwards, I_STEP=2 is also called again.
Thanks
Dipika

Similar Messages

How to populate budget in creation of Fund?

Hi Gurus,
Can anybody give me a clue on how to populate the 'budget'or 'Expired' in the process of creating a fund in CRM? I could not fill out because the fields are grey .
Thanks

nobody can answer , so delete it

How to populate the condition tables of CRM 7.0

Hello Friends,
How to populate values in CND* tables , i assume these are the tables that hold the conditions.
Thanks and Regards,
Vasu

Hi,
if you refer to CND* tables those are tables involved in the condition master data exchange between ERP and CRM (on CRM side). Actual condition tables for pricing related condition records start with CNC*. In the help there is a documentation of the condition master data tables for pricing available: http://help.sap.com/saphelp_crm70/helpdata/EN/0e/91f9392486ce1ae10000000a114084/content.htm
Hope this helps.
Best Regards,
Michael

How to populate the time component of a cube?

We have a question regarding how to populate the time component of a cube. Let me explain:
We are using OWB 10gR2. We have created a cube with several dimensions. We are now building the mapping to load the cube. The cube operator has two columns for every dimension (e.g., "customer" and "customer_id" for the "customer" dimension).
We understand that, in this case, "customer_id" stands for the dimension business key, so we create an arrow from the business key in the source table to the "customer_id" column in the cube operator.
So far so good. The mapping works all right, and the cube is loaded correctly.
Now we need to do the same for the time dimension. We have already created the time dimension and we have loaded it. We have also included it in the cube, so now we have two new columns in it: "time_day_code" and "time", both NUMBER data type.
We have the "sale_date" column (DATE data type), in the source system and, of course, now we want to populate the date column in the cube. We suppose that, somehow, we have to translate the "sale_date" field into the numeric column of the surrogate key of the time dimension. How should do we do this? I suppose that OWB must do the translation for us, just as it does for the other dimensions, but how? We have been looking into the manuals, and we have found no explanation on how to go about this.
Any help would be appreciated.
Best regards
Juan Algaba

Hi Juan
You are right this should have been in the manuals, checked and there is only a brief mention (Using a Time Dimension in a Cube Mapping section)
The identifier format should have been documented for each level and will involve creating the formatted attribute for input to the cube operator's time dimension reference attribute.
The time dimension business keys are stored as follows;
Day Level - YYYYMMDD
Month Level - YYYYMM
Week Level - YYYYWW
Quarter - YYYYQ
Year - YYYY
If you have a source that has a SQL date datatype for example and want to construct the key for a cube's time dimension at the day level something like the following expression can be used to construct the time reference from a SQL date...
to_number(to_char( time_key, 'YYYYMMDD'))
The result of this expression can be used as input to the cube's time dimension attribute.
Cheers
David

How to populate data in PAY_PEOPLE_GROUPS table (People Group Flexfiled)

Hello
We are migrating the data from one oracle instance to another oracle instance which are in same version of Oralce Applications 11.5.10.2. As a part of migration can anybody let me know how to populate data in "People Group Key Flexfiled" (PAY_PEOPLE_GROUPS table), ideally I will create or update employee records from the source instance to destination instance, so while creating or updating the employee records in can pass people_group_id while calling to the assignment api but my question here is before passing group id to the api i should have the data populated in PAY_PEOPLE_GROUPS TABLE so that i can fetch the group id as per the combination and pass it in to the api.. please suggest...

Thanks for your information! by any chance do you have any sample code which will create/update assignments with People Group Flexfield; when i check "hr_assignment_api.update_emp_asg_criteria" it only has parameter to pass people group id and not having segments parameters to pass individual segments.
Also let me know the links if you have any for all HR API guide which will help me to develope the interfaces...
My requirement is we have two instances in which in one instance we are treating as source for HR which will be used to master for all HR related activities and we are planning to develope an interface which will bring master instance in sync with dummy instance.

Uix:Tree - How to populate in jsp ?

Hello all,
I'm having trouble to know how to populate an <uix:tree> in a JSP page. I see the UIX Developer's guide and the SimpleTreeData example and the documentation about uix:jsp is very poor. The data that will be posted in the <uix:tree> was provided by IFS. Then, I populate a DataObjectList with the files name. The point is that I don't know how to make a link between this DataObjectList, populated in a class(*.JAVA) file and the <uix:tree>(*.JSP) file. I wanna know how to use only <uix:jsp> and don't use *.UIX files, only *.JSP and *.JAVA files, ok ?
Here are some code part :
This is the JSP file
<%@ taglib uri="http://xmlns.oracle.com/uix/ui" prefix="uix" %>
<%@ page import="Hierarquia" %>
<%@ page import="oracle.cabo.ui.data.DataObjectList" %>
<%@ page contentType="text/html;charset=windows-1252"%>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<title>
Ifs - PublicaÃ§Ã£o de Documentos
</title>
</head>
<uix:document>
<uix:styleSheet />
<body>
<uix:body>
<uix:pageLayout>
<uix:contents>
<uix:form name="teste">
<uix:contents>
<%
DataObjectList dados = null;
Hierarquia x = new Hierarquia();
x.conecta();
x.populateTree();
dados = x.getResultSet();
%>
<uix:formattedText text="Teste" />
<uix:tree id="arvore_teste" nodesBinding="????" formName="teste">
</uix:tree>
</uix:contents>
</uix:form>
</uix:contents>
</uix:pageLayout>
</uix:body>
</body>
</uix:document>
</html>
Thanks folks !
Carlos

Carlos -
I believe that the best way to do this is to use scriptable variables, eg:
<uix:tree id="arvore_teste">
    <%
      // Assuming "dados" contains your tree data
      arvore_teste.setNodes(dados);
    %>
</uix:tree>See the "Scriptable Variables" section in the "UIX JSP Tag Libraries" chapter of the UIX Developer's Guide for more info...
Andy

How to populate a page with images in across/down direction?

Hi,
Does anyone know how to populate a page with images in across and down direction (for example 6 X 6 )? It seems that I cannot use data table because records are only running downward and each row can have one record.
Any suggestion would be appreciated. thanks.

Alex,
You can create your own tabular form using APEX_ITEM API's
Create report and you can put similar code to following
SELECT APEX_ITEM.TEXT(1,col1) pk1, APEX_ITEM.TEXT(2,col2) pk2 FROM your_tableSo data will be displayed in TEXT boxes as if it's a tabular form. Now you need to handle INSERT/UPDATE/DELETE processes manually. You can easily handle INSERT and DELETE. But handling UPDATE can be a nightmare. What if user has updated both the column values?
Updated details
One way out would be to use ROWID as Primary key to handle DELETE and UPDATE
SELECT APEX_ITEM.CHECKBOX(1,ROWID) tick, APEX_ITEM.TEXT(2,col1) pk1, APEX_ITEM.TEXT(3,col2) pk2 FROM your_tablebut yet I suggest to go for proper primary key..
Regards,
Hari
Edited by: Hari_639 on Dec 3, 2009 6:52 PM

How to populate internal table field with text data?

Hello Experts,
I was able to load text file to a internal table but data is not populating each field. Can someone help me how to populate each field of internal table from text file?
Here is the text file:
io_name, io_type, io_txsht, io_txlng, io_datatype, io_length
ZEA_IO1, CHA, IO Test,     IO Test 1, CHAR,       20
ZEA_IO2, CHA, IO Test,     IO Test 2, CHAR,       20
Here is the Code:
*& Report ZAS_BAPI_TEST                                               *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects.              *
*& Text file will hold the Info Object Structure. Text file will be    *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure          *
*& Step 2. Retrieve/Load text file into Internal Table structure       *
*& Step 3. Call BAPI Function to Create IO                             *
*& Step 4. Call BAPI Function to Activate IO                           *
REPORT ZAS_BAPI_TEST                           .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
      Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
        io_name like BAPI6108-infoobject,
        io_type like BAPI6108-type,
        io_txsht like BAPI6108-textshort,
        io_txlng like BAPI6108-textlong,
        io_datatype like BAPI6108-datatp,
        io_length like BAPI6108-intlen,
      END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
      PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
     Copy the file from the workstation to the server        ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                = p_file
               FILETYPE                = 'ASC'
               HAS_FIELD_SEPARATOR     = SPACE
               HEADER_LENGTH           = 0
               DAT_MODE                = SPACE
               CODEPAGE                = SPACE
               IGNORE_CERR             = ABAP_TRUE
               REPLACEMENT             = '#'
               READ_BY_LINE            = 'X'
             IMPORTING
               FILELENGTH              =
               HEADER                  =
TABLES
    data_tab                = itab-bapi[]
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    not_supported_by_gui    = 17
    error_no_gui            = 18
    OTHERS                  = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
   ELSE.
     pit_data[] = lit_data[].
   ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
           20 itab-bapi-io_type,
           30 itab-bapi-io_txsht,
           50 itab-bapi-io_txlng,
           75 itab-bapi-io_datatype,
           85 itab-bapi-io_length.
endloop.
      SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_filename     = ''
      def_path         = 'C:\'
      mask             = ',Documentos de texto (*.txt), *.txt.'
      mode             = ''
    IMPORTING
      filename         = p_file
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
    concatenate p_file '.txt' into sel_file.
else.
    sel_file = p_file.
endif.
      Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
    VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
    VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
    VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
     COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
     ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
     NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
     ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
     HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
     ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
     RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
      Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM.                    " RETRIEVE_DATASET
I appreciate your help.
Regards,
Mau

I have used tab delimited file.
Here are file contents
io_name     io_type     io_txsht     io_txlng     io_datatype     io_length
ZEA_IO1     CHA     IO Test     IO Test 1     CHAR     20
ZEA_IO2     CHA     IO Test     IO Test 2     CHAR     20
And here is program used
*& Report ZAS_BAPI_TEST *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects. *
*& Text file will hold the Info Object Structure. Text file will be *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure *
*& Step 2. Retrieve/Load text file into Internal Table structure *
*& Step 3. Call BAPI Function to Create IO *
*& Step 4. Call BAPI Function to Activate IO *
REPORT ZAS_BAPI_TEST .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
io_name like BAPI6108-infoobject,
io_type like BAPI6108-type,
io_txsht like BAPI6108-textshort,
io_txlng like BAPI6108-textlong,
io_datatype like BAPI6108-datatp,
io_length like BAPI6108-intlen,
END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
Copy the file from the workstation to the server ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
<b>FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'</b>
TABLES
data_tab = itab-bapi[]
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
ELSE.
pit_data[] = lit_data[].
ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
20 itab-bapi-io_type,
30 itab-bapi-io_txsht,
50 itab-bapi-io_txlng,
75 itab-bapi-io_datatype,
85 itab-bapi-io_length.
endloop.
SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'C:\'
mask = ',Documentos de texto (*.txt), *.txt.'
mode = ''
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
concatenate p_file '.txt' into sel_file.
else.
sel_file = p_file.
endif.
Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM. " RETRIEVE_DATASET
This program is working fine. You can test it.
Only problem is as the column headings are big for some columns, they are getting truncated which you can always change by changing the column width in declaration
Please let me know if this helps.
ashish

How to populate default values for BP (FPP1 is tcode in ECC 6.0)

Hello ,
I am creating BP in ECC 6.0 using Fpp1 tcode. How to populate default values when i hit create BP person.   any badi triggers when we are creating BP in ECC.
guide me.

Hi Premanand,
To default fields, you need to do the following steps :
1. Create a Z module e.g. : Z_DEFAULT_FIELDS_DIALOG.
2. Enter suppose you want to default fiels Name, title, country, write code as follows :
DATA : ls_busdefault LIKE busdefault.
ls_busdefault-title = '0002'.
ls_busdefault-mc_name1 = 'TEST'.
ls_busdefault-mc_name2 = 'Default'.
ls_busdefault-country = 'IN'.
    CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
    EXPORTING
      i_busdefault = ls_busdefalut.
3. Now got to transaction BUS7, select event ISDAT, click on Event--> function modules.
4. Register your Z module Z_DEFAULT_FIELDS_DIALOG in this list, Save.
This should solve your problem. Please note : You can only default those fields contained in structure BUSDEFAULT.
Cheers,
Rishu.

How to populate data in a JTable?????????

hi there
can anyone tell me how to populate data in a JTable? when a table is displayed, the table should have data retrieved from a file. thank you.

Hi,
it is correct, that the best way to learn about JTable is to read the online tutorial about JTable. To give you a quick guideline, where to start your implementation, I will add this:
A JTables data is hold in a TableModel. TableModel is an interface, so if a class implements this interface correctly, you can simply populate the data hold by this TableModel by constructing a JTable this way
JTable jt = new JTable(MyTableModel);
where MyTableModel is your class, which implements the TableModel interface.
When JTable has to render a cell, it will call the getValueAt(...) method of the TableModel for example.Your implementation of this method must deliver the requested data - if you prefetch a bunch of data from a file and store it internally in this TableModel or fetch it from the file just in time, is up to you.
greetings Marsian

How to populate city information in a brand new EBS R12 environment?

How to populate city information (location) in a brand new EBS R12 environment?
What other basic setup needs to be done before setting up GL in this new EBS R12 environment?
Thanks,
SR

Pl do not post duplicates - What are the steps involved in configuring Oracle EBSR12 after installation
Pl continue the discussion in your original thread

How to populate values in List Box in Adobe form

Hi,
How to populate values in List box in adobe forms?
Thanks
RB

if you want to display a fixed values in the dropdown you can use list box ui and can specify values there
or if u want to display values from the context node of the webdynpro
1. Drag and drop a Value Help Drop-down List element from the Web Dynpro Library tab to the Body Pages pane.
2. Drag and drop your node from the Data View tab onto it. This action binds the layout element to the corresponding node.
with regards
shanto aloor

How to populate values for a new field in target infoprovider

Hi Experts,
am new to BI. i would like to know on how to populate values for a new field in the target cube with start rotuine.In my case, i have a source infoprovider, which has 3 fields and a target infoprovider, which has 5 fields. i need to populate the new 2 fields in start routine. i dont want to populate using Field routine and am using 3.5 version. please assist with code on how to solve this issue.
Thank you,
Chitra.
Edited by: Chitra_BI on Jun 13, 2011 10:23 AM

Debug the standard code and see where the other fields are getting update. you can use the similar approach and area to code for the new field.
Regards,
Lalit Mohan Gupta.

How to use CrossReference and DVM in ODI &how to populate data into Xref

Can any one tell how to use Domain Value Maps and Cross Referencing in ODI?
DVM or Domain Value Map are created and used in ESB console of SOA suite.
My actual requirement is as follows:
The below steps describe loading data from ERP Application 1 to ERP Application 2.
1. The Source Application ERP APP1, populates the interface table using their native technology.
2. A job scheduler invokes the Source side ODI Package.
3. ODI then extracts the data from Source Interface table and populates the Target Interface table.
4. After populating the Target interface table the ODI populates the X-ref table with App 1 ID and generated common ID.
5. The ODI either deletes or updates the rows that were processed from the Source interface table.
6. On the Target Application ERP APP2, the native application extracts data from target interface table and populates target database there by generating ERP Application 2 ID.
7. A job scheduler on the Target application invokes the ODI package to populate the Application 2 ID onto the Xref table matching on the Common ID.
I just want to know :
1. How to populate data into the Xref table from Source datastore
2. And if data is successfully laoded from target datastore to actual base table of target then how to populate the target id into the cross reference table.

can anyone suggest me some answer, then it would be of great help?

How to populate column value from a sequence in adv table

Hi Everyone,
This is my requirement. When a user clicks on add another row button of advance table a new row should appear with ID column populated as a sequence value. For eg: When the page renders for the first time, no records are shown in the advance table. when user clicks on add another row button a new row should be added with the ID column poplulated as 1. When the user clicks on add another row button for the 2nd time, the ID coulmn value should be 2 and so on.
After user clicks on submit button data will be inserted to the data base table.
Please tell me how to populate the column values with a sequence 1,2,3 ..so on on click of add another row button.
Thanks in Advance
Sunny!

Hi Gyan,
Below is the code I'm using in PFR.
OAAdvancedTableBean tableBean = (OAAdvancedTableBean)webBean;
OADBTransaction Tr=amobj.getOADBTransaction();
if ( (tableBean.getName().equals(pageContext.getParameter(SOURCE_PARAM)))
&& ADD_ROWS_EVENT.equals(pageContext.getParameter(EVENT_PARAM)))
System.out.println("in if clause");
Number lineNumber = Tr.getSequenceValue("paymentLineSequence");
testLineEOViewImpl vobj = amobj.gettestLineEOView1();
vobj.getCurrentRow().setAttribute("SundryRequestLineNumber",lineNumber);
When i click on Add Another Row button its throwing an exception as below.
oracle.apps.fnd.framework.OAException: java.lang.ClassCastException: oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean
     at oracle.apps.fnd.framework.OAException.wrapperException(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at OA.jspService(_OA.java:71)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
## Detail 0 ##
java.lang.ClassCastException: oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean
     at oracle.apps.ap.payments.webui.testCO.processFormRequest(testCO.java:98)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at OA.jspService(_OA.java:71)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
java.lang.ClassCastException: oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean
     at oracle.apps.ap.payments.webui.testCO.processFormRequest(testCO.java:98)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at OA.jspService(_OA.java:71)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)

How to populate "N/A" or "#" in KFs

Similar Messages

Maybe you are looking for