How to populate the data in fields if we tab out at one field

Hi Gurus,
I am new to OAF Technology and I've new requirement in custom OAF page.
We have 12 fields like ID, Fname, Lname, Age, Address, Tphone etc..
If we enter ID in message text input field box and tab out, then it should populate all the remaining fields data by default.
Could anyone help me regarding this requirement?
Thanks in Advance
Sruthi

Hi,
Sruthi wrote:
I am new to OAF Technology and I've new requirement in custom OAF page.
We have 12 fields like ID, Fname, Lname, Age, Address, Tphone etc..
If we enter ID in message text input field box and tab out, then it should populate all the remaining fields data by default.
Could anyone help me regarding this requirement?---MessageTextInput filed set Action property:FirePartialAction and Event:TextInput
---Get the Event in co PFR
if("TextInput".equals(pageContext.getParameter(EVENT_PARAM)))
AM.setDafultValue();
---Write a method in AM
public void setDafultValue()
VOImpl vo=getVO1();
if(vo!= null)
vo.getCurrentRow().setAttribute("Number1","DefaultValue1");
vo.getCurrentRow().setAttribute("Number2","DefaultValue2");
---Like this u can set default value when tab out.
Regards
Meher Irk

Similar Messages

How to populate the data in LISTBOX   of Dialog programming

Hi All,
I know how to create a Listbox in Modulepool programming, But i do n't know how to populate the data in LISTBOX. Does anyone knows , please help me ?
Thanks in advance
KR

hi,
u need to write this after all modules of PAI in screen flow logic
PROCESS ON VALUE-REQUEST.
FIELD ifmtp-form_type MODULE fm_drop.
MODULE fm_drop INPUT.
CLEAR ifmtp.
REFRESH ifmtp.
ifmtp-form_type = 'C'.
APPEND ifmtp.
ifmtp-form_type = 'F'.
APPEND ifmtp.
ifmtp-form_type = 'H'.
APPEND ifmtp.
ifmtp-form_type = 'D'.
APPEND ifmtp.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield = 'FORM_TYPE'
      value_org = 'S'
    TABLES
      value_tab = ifmtp.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE.                 " fm_drop INPUT
here ifmtp-form_type is my list box field on screen in which ifmtp is my internal table and form_type is my field name
i have declared internal table like
DATA : BEGIN OF ifmtp OCCURS 0,
          form_type LIKE zform_track_mast-form_type,
       END OF ifmtp.
reward if useful...

How to populate the data into the newly added infoobjects?

Hi,
how to populate the data into the newly added infoobjects?
Thanx in advance,
Ravi.

hi ravi,
here is one example how to enhance.
Goto RSA6- select the 0Material.- Click on Enhance extract structure-> it will take u to the next screen there u need to create the field material group1. and append it to 0Material.
Goback to RSA6-- RC on 0material-- it will take you to customer version edit screen- here unchk the Hide and Field only known in exit options n save it.
Next Go back to RSA6-- 0material- click on Function enhancement it will take you to CMOD Screen( here we need to enter the project name and click create if not created on click display)
In the next screen we find the function exits Like EXIT_SAPLRSAP_001 FOR T DATA AND EXIT_SAPLRSAP_002 FRO Master Data,_003 for Text n _004 for Hierarchies.
select the appropriate function exit and double clikc on it. It will take you to Function builder screen.
D Click on defn of Include ZXRSAU01. it will take you to abap editor screen.
here u need to include the code for the enhanced fields n also write the code to populate the dat for that particular field.
save it and avtivate the code.
Hope this Is helpz,
partha

How to populate the data for additional fields in custom report of fbl5n tr

hallo friends,
i ha ve to add some fields to the output of custome report of transaction FBL5N.
Till now i have only added the fields to the output.
Now i have to write the code to populate the data for those fields in the program.
1.     Customer Credit Group(ACM/RCM): (Table: KNKK; Field Name: VKORG )
2.     Credit Representative Group: (Table: KNKK; Field Name: SBGRP)
3.     Customer Account Number(CAN#): (Table: KNKK; Field Name: KNKLI)
4.     Alternative Payer(ALTP#) : (Table: KNA1; Field Name: KUNNR)
5.     Risk Category: (Table: KNKK; Field Name: CTLPC)
6.     Credit Info Number: (Table: KNKK; Field Name: KRAUS)
7.     Rating: (Table: KNKK; Field Name: DBRTG)
8.     Payment Index: (Table: KNKK; Field Name: DBPAY)
9.     Credit control area: (Table: KNKK; Field Name: KKBER)
10.     Company code: (Table: KNB1; Field Name: BUKRS)
11.     Sales Organization: (Table: KNVV; Field Name: VKORG)
These are al fields i have to populate in the program..
MY ATTEMPTS:
I tried getting the data for KNKK table by GET KNKK ,but it is giving some garbage values...
And Logical database used here is DDF,and i have to add the VKORG of KNVV too...but KNVV is not there in DDF...
Can anybody tell me how should i proceed..
thanks in advance.

Thnx Andreas,
i have following doubts again..
I have to add sales organisation field to the selection screen...(this is given in the req.)
now if i will say GET KNKK...it would not keep account of this 'sales organisation' field...so how should i fetch the data with these input data( i.e. 'compny code' and 'customer' are the fields given by LDB and 'sales oraganisation' is the field i put it on the selection screen)
And what about the KNVV-VKORG ,because the KNVV is not present in the LDB.

How to populate the data in to customised cube

hi,
guys, i have customised the infocube (0PUR_C01)by adding the additional info object , i want populate the data (using updaterule) in to infocube with out loosing current data for hte added info object .
can any help this, how to write updaterule
thanks in advace
ram

Hi Ramanathan,
If you need historical data for the newly added info object, you'll have to intitialize again from the source system.
That means you'll have to delete the data and load it again from the source.
If you don't want to delete the data, you can create an Export data source of the existing cube(say Cube A)
and load the data to another cube(Say Cube B which is a copy of A).
Then you can delete the data from Cube A and add the required info objects to cube.
Then you have to create an Export data source of Cube B and load data back to Cube A from B.
It depends on your business requirements.
<b>Since you don't want Historical data for the newly added info object,
there's no need to delete the existing data.
Add the new info object and maintain the Update rules for this new info Object.
The new records will be have values for this Info Object depending on the routine
you specify in the update rules.</b>
Refer these links for more information on Routines in Update Rules.
http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm
<b>Creating Update Routines</b>
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a64fae07211d2acb80000e829fbfe/content.htm
Hope this helps.
Regards
Hari
Message was edited by: Hari Krishnan K

How to populate the data or details of only the present year and the previous year with respect to the given RATNG?

Hi All,
I have created a form with 5 blocks (namely ENQACMHDR, ENQACMDTL, ENQACEHDR, ENQACEDTL, ENQACSPEC), where i have 8 push buttons (namely ENTER_QUERY, EXEC_QUERY, CLEAR, FIRST, NEXT, PREVIOUS, LAST & EXIT).
This form is created just for viewing purpose only. So after I execute, all the blocks have been blocked against insert & update.
I query on 2 fields that is 'ENQNO' and 'RATNG' (Both the fields belong to the block ENQACMDTL).
When I click on 'EXEC_QUERY' directly, all the data of all the years populates.
But the user wanted the data to be populated from only the present year and the previous year.
So , on 'WHERE Clause' of the property_palette of 'ENQACMDTL' block , I put in the following condition:
SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
PROPERTY PALETTE (ENQACMDTL block)
WHERE Clause
SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
Now the data of only the present year and the previous year is being populated. Its ok with the field of 'ENQNO'.
The problem is when i query on field 'RATNG' . 'RATNG' is a Text_item with Number of Items displayed=5. (5 rows)
The following are 2 columns of a Table (Name=ENQACMDTL) in Database.
ENQNO
RATNG
2013900054
500KC2
2013900047
800KC4
2013520018
750KC6
2012900037
1000KC2
2012520109
500KC2
2012140019
750KC6
2011540036
500KC2
2011100030
1000KC2
2006100007
90KD8
2006750014
750KC6
2006900072
500KC2
The first 4 numbers of 'ENQNO' denotes the year. There are more than a lakhs of records.
So when i query on the field 'RATNG',
Example:For RATNG=500KC2;
I click on ENTER_QUERY, On the field of 'RATNG' , i put in the value 500KC2 and click on EXEC_QUERY; Details with respect to 500KC2 is displayed as well as all the other unwanted RATNG like 750KC6, 1000KC2 (which belongs to the ENQNO of the present year and the previous year) also gets displayed.
I want details of only RATNG (500KC2) to be displayed, but only of the present year and the previous year, that is 2013900054, 2012520109 (ENQNO).
Other than 500KC2 RATNG, no other RATNG must be displayed.
The RATNG=500KC2 is also present for ENQNO=2011540036 , 2006900072. But I dont want these to be displayed.
I want only the data or details of the present year and the previous year to be displayed or populated with respect to the given RATNG.
Can You Help me or tell me what do i do for this?
Hope I'm clear with my question!!
If my question is not clear, let me know plz.
Thank You.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
Oracle forms 6i.

On key-exeqry you have to program. Delete all other trigger codings for checking your condition.
It dint work on key-exeqry.
I tried key-exeqry on form trigger, block (enqacmdtl) and also on field(:enqacmdtl.enqno) , but none of them worked.
It did not display the message.
I have a 'PUSH-BUTTON:EXEC_QUERY.
For EXEC_QUERY, Trigger : WHEN_BUTTON_PRESSED;
I added the following code:
if to_number(substr(:enqacmdtl.enqno,1,4))<to_number(to_char(add_months(sysdate,-12),'YYYY')) then
     message('The Rating is not present for the present year and the previous year');message(' ',no_acknowledge);
     raise form_trigger_failure;
else
     execute_query;
end if;
It is working fine and the message is being displayed.
But again I have a new problem and that is;
On the field :enqacmdtl.enqno, when i enter the '2013%' and press 'EXEC_QUERY', it works fine.
but when i enter '2006%' and press 'EXEC_QUERY', it shows the following error
FRM-50016: Legal characters are 0-9 - +E. It does not display the message also.
but when i enter the complete number, '2006580002', then it works fine , that is it displays the message (The Rating is not present for the present year and the previous year).
The problem is because of '%', only when i put in the restricted data (which does not satisfy where condition).
How do i solve this?
Thank You Priyasagi.

How to populate the data to second sheet tab in excel

Hai,
I need to populate data to the second sheet tab of excel sheet .
Below is the code wherein I added datas to first sheet of the excel sheet.Can anyone help me in this ?
<%
response.setHeader("Cache-Control","max-age=0"); // HTTP 1.1
response.setHeader("Pragma","public"); // HTTP 1.0
response.setDateHeader ("Expires", 0); // prevents caching at the proxy server
response.setContentType("application/ms-excel;charset=UTF-8");
response.setHeader("Content-Disposition","attachment;filename=Test.xls");
%>
<html xmlns:v="urn:schemas-microsoft-com:vml"
xmlns:o="urn:schemas-microsoft-com:office:office"
xmlns:x="urn:schemas-microsoft-com:office:excel"
xmlns="http://www.w3.org/TR/REC-html40">
<xml>
<x:ExcelWorkbook>
<x:ExcelWorksheets>
<x:ExcelWorksheet>
          <x:Name>Sheet-1</x:Name>
<x:WorksheetOptions>
</x:WorksheetOptions>
     </x:ExcelWorksheet>
     <x:ExcelWorksheet>
          <x:Name>Sheet-2</x:Name>
     <x:WorksheetOptions>
     </x:WorksheetOptions>
</x:ExcelWorksheet>
</x:ExcelWorksheets>
<x:WindowHeight>9090</x:WindowHeight>
<x:WindowWidth>15180</x:WindowWidth>
<x:WindowTopX>120</x:WindowTopX>
<x:WindowTopY>15</x:WindowTopY>
<x:ProtectStructure>False</x:ProtectStructure>
<x:ProtectWindows>False</x:ProtectWindows>
</x:ExcelWorkbook>
</xml>
<body link=blue vlink=purple>
<table x:str border=0 cellpadding=0 cellspacing=0 width=192 style='border-collapse:collapse;table-layout:fixed;width:144pt'>
<tr height=17 style='height:12.75pt'>
<td height=17 align=right >HELLO</td>
<td align=right >HI</td>
<td align=right >GOOD BYE</td>
</tr>
</table>
</body>
</html>

Hi,
It's been a while since I did this stuff so I apologise if my advice is out of date.
This is actually more of a Micro$oft question as this is their propriety SpreadSheet Markup Language so POI probably won't help. Also, you might want to look at using the default namespace of "urn:schemas-microsoft-com:office:spreadsheet" as this is the more current implementation unless you need to be backward compatible.
On your specific question, I think that you should be able to put the table tag (SSML not HTML) inside the worksheet and then create the rows and cells in there. I've never tried mixing the 2 markup languages though so I'm not sure how to get the HTML to go into the correct sheet.
Sorry I couldn't help more :-(

How to populate the data in purchasing LIS tables - S011 and S012

Hello,
While Running the report mc$g, I am not getting the values into invoice column. Please let me know if there is any setting I need to do in IMG to populate the invoice data.
Thanks,
Aditya

Hi,
Note 433518 deals with most known problems in relation to
updating infostructures S011 and S012. Sometimes when a new support
pack or upgrade takes place and a statistical set-up does not
inconsistencies can occur.
S011 forms the data basis for the purchasing group analysis.
S012 forms the data basis for the material groups, vendor and material
analysis.
The key figures in the Purchasing Information System are updated when
the following three types of events occur:
- Purchasing document (purchase order, scheduling agreement, contract,
inquiry/quotation) create/change
- Goods receipt for a purchase order, scheduling agreement
- Invoice receipt for a purchases order, scheduling agreement
You can find further information about updating in the Implementation
Guide for the Logistics Information System.
For more information on PURCHIS, please visit SAP's online help. You
should find all the information you are looking for there.
Can you please review the following notes as a possible solution for
your issue :
501416 Purchase order changes are updated incorrectly in S011/S012
459450 FAQ: Logistic Information System (LIS) in Purchasing
Report RMCENEUA is used to set up statistical data for Purchasing
information structures such as S011, S012, and S013.    The best answer regarding information about reorganizing statistics in program RMCENEUA / transaction OLI3 can be found in the attached   note 64636.
Regards,
Edit

How to populate the Data into Form

Hi,
I would like to know how we can populate value when it opens into form manager.
For ex A person opens a form he enter the emploee id and all corresponding fields should get populated in corresponding with that from database.

Hi,
i m using live cycle designer 7.1, i have mapped the form with default values for example in a table if all the rows of the table is mapped with one default value and if one user info is populated in the table then all the default value is not printing ie in the remaining rows can any help in this regard

Select the data from table which inbteween as well as one field if satisfy

Tab1.   entries are below
MANDT   SLRNO   BUKRS   ORDNR       FANLKL     TANLKL
111                                 Ger          2           00110000       00110030
111            000013         Ger          1            00110000       00130000
111           000054          Ger          1             00110000     00130000
111           000055          Ger           2             00110000     00110030
111            000072         Ger          1             00110000      00130000
111             000073        Ger          1             00110000     00130000
111             000074       Ger           2             00110000     00110030
111             000075       Ger          2              00110000     00110030
111           000126         Ger          2             00160000      00160000
lv-assetclass = u201800110020u2019 this is and company code is the only values which I have.
which is inbetween 00110000    and    00110030
So my below select statement should always give me sy-subrc = 0.
select single FANLKL TANLKL
              from Tab1
              into (lv_var1, lv_var2)
             where   BUKRS = Lv_companycode
               and   ( FANLKL GE lv-assetclass and TANLKL LE lv-assetclass ).
          if sy-subrc <> 0.
            Codes are there.
          Endif.
But it is giving sy-subrc = 4.So it satisfies the if statement and what ever the code part is there in ifu2026endif that is executed.
My requirement is if lv-assetclass is 00110000 or 00110030 or inbetween these two values 00110020 for all the sy-subrc = 0.Even 00120000 should also give me sy-subrc 0 as 6th line is having entry 00110000     00130000 and 00120000 is coming under this.it should give me Sy-subrc = 0 when I put lv-assetclass as 00110000 also.
Can any one help me out in his select statement.
Regards,
Partha

Hi,
Change your Select Query as:
select single FANLKL TANLKL
from Tab1
into (lv_var1, lv_var2)
where BUKRS = Lv_companycode
and ( FANLKL LE lv-assetclass and TANLKL GE lv-assetclass ).

How do I auto populate the date into text fields when form is first opened?

Hello,
I read all about the changing the scripts but its not really working for me. I was hoping someone could help me with directions on how to auto populate the date into designated text fields when my adobe document is first opened?
I am working in Adobe Acrobat 9.
Thank you,
Sheri

When you add a new document JavaScript (Advanced > Document Processing > Document JavaScripts > Script Name (enter something) > Add), you will be given a function skeleton by default. Just delete it and enter the line of code I showed above. Now, whenever the document is opened, the code will get triggered and the field will be updated with the current date. There is no "Document Open" action (at least that's accessible via Acrobat's UI), but this is effectively the same thing since any document-level JavaScripts are executed when the document is opened.

How to populate the field Discount Percent (DIS) in the outbound S1ORDEXC?

Hello all,
I am working with the Spec2000 to send out the IDOC S1ORDEXC.
Does anyone know how to populate the field Discount Percent (DIS)?
This field length of Discount Percent is 2 characters, but our customer discount in the Princing Conditions (Sales Order) is longer than 2 characters (ex: 7.500-%)
Thank you

Hello Thuan
I guess you are working with IS- ADEC and SPEC 2000. I am not an expert on this but leave you some hints from OSS notes I came across.
It appears like Discount Percent - DIS and Procurement Discount Percent -PDP are complementary and mutually exclusive. If one exists, the other need not.
Looks like DIS is computed as (100-PDP)/100 and it is just a 2- integer data (as in 20 Percent). It is a kind of multiplier (Factor), example if PDP discount is 10 percent, then DIS (Factor) is 0.9 and so final (net) price after discount = Price*0.9.
" If the discount comes in the S1BOOKED inbound into SD in the field DIS, then the discount has to be sent back in the DIS field .. if it came in the PDP field then it has to be sent back in the PDP field. If there was no discount in the incoming IDoc, then the discount has to be filled in the PDP if there was a change in the discount".
KDATE in SPEC 2000 file maps to DIS and KPERC to PDP.
PDP has 4 characters and per OSS note 440380, the point is ignored meaning you can work with 1225 instead of 12.25.
So may be you can work with PDP?
OSS notes: Apply to older releases but may still be applicable conceptually speaking.
456153 - S1ORDEXC does not send out Discount
440380 - PDP has only 4 characters in the SPEC IDoc instead of 5
596042 - Discount percent DIS not considered e processing S1ORDEXC
698668 - Incorrect calculation of unit price for PO item by S1ORDEXC
Let me know you final findings.

How to populate the TEXT field in MIGO

Hi folks,
While creating material document in MIGO or MB01, i am inserting some data in TEXT ( Field in line item level ). This text data is disappearing , once mat doc is created.
how to populate the TEXT field in MIGO?Is there any cusomisation?it's urgent .
Regards
pabi

Hello Pabitra,
I had a similar issue in my Project.
Please verify if the SMOD enhancement MBCF0002 (EXIT_SAPMM07M_001) is active in your system.
If this is the case, verify from two angles:
a) Whether the Enhancement was accidentally activated - If yes, then De-activate the same
b) If there is some logic coded in the User Exit, but, the Text is somehow not determined...even the existing content in the text field (input to EXIT_SAPMM07M_001) will get vanished.
Hope that your problem will be resolved by this. Pls reward points.
With Regards
Vijay Gajavalli

How to populate TableView data on the other screen TextField

Hi guru’s
I am having problem in populating data from a table in one screen to a Text Field in the other screen. I have two classes FirstClass containing a textbox and a button. On pressing a button a second window is opened containing a Table of values. As the user double clicks a row the value of the second column of the row should be inserted into the textbox of the FirstClass. Code of both the classes is attached. Thanking you in anticipation.
import javafx.application.Application;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.geometry.Insets;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.TextField;
import javafx.scene.layout.GridPane;
import javafx.scene.layout.StackPane;
import javafx.stage.Stage;
public class FirstClass extends Application {
public static void main(String[] args) {
     launch(args);
@Override
public void start(final Stage primaryStage) {
     primaryStage.setTitle("First Class");
GridPane gridpane = new GridPane();
          gridpane.setPadding(new Insets(5));
          gridpane.setHgap(5);
          gridpane.setVgap(5);
final TextField userNameFld = new TextField();
gridpane.add(userNameFld, 1, 1);
Button btn = new Button();
btn.setText("Show Table");
gridpane.add(btn, 1, 3);
btn.setOnAction(new EventHandler<ActionEvent>() {
@Override
public void handle(ActionEvent event) {
     String a = TableClass.showDialog(primaryStage, true, "Table Window" );
     userNameFld.setText(a);
StackPane root = new StackPane();
Scene scene =new Scene(root, 300, 250);
root.getChildren().addAll(gridpane);
primaryStage.setScene(scene);
primaryStage.show();
import javafx.beans.property.SimpleStringProperty;
import javafx.collections.FXCollections;
import javafx.collections.ObservableList;
import javafx.event.EventHandler;
import javafx.geometry.Insets;
import javafx.scene.Scene;
import javafx.scene.control.TableColumn;
import javafx.scene.control.TableView;
import javafx.scene.control.cell.PropertyValueFactory;
import javafx.scene.input.MouseEvent;
import javafx.scene.layout.GridPane;
import javafx.scene.layout.StackPane;
import javafx.stage.Modality;
import javafx.stage.Stage;
public class TableClass extends Stage {
     private static TableClass dialog;
     private static String value = "";
     public static class Person {
private final SimpleStringProperty firstName;
private final SimpleStringProperty lastName;
private Person(String fName, String lName) {
this.firstName = new SimpleStringProperty(fName);
this.lastName = new SimpleStringProperty(lName);
public String getFirstName() {
return firstName.get();
public void setFirstName(String fName) {
firstName.set(fName);
public String getLastName() {
return lastName.get();
public void setLastName(String fName) {
lastName.set(fName);
     private TableView<Person> table = new TableView<Person>();
     private final ObservableList<Person> data =
     FXCollections.observableArrayList(
     new Person("JACK", "BROWN"),
     new Person("JOHN", "VIANNEYS"),
     new Person("MICHAEL", "NELSON"),
     new Person("WILLIAM", " CAREY")
     public TableClass(Stage owner, boolean modality, String title) {
          super();
          initOwner(owner);
          Modality m = modality ? Modality.APPLICATION_MODAL : Modality.NONE;
          initModality(m);
          setOpacity(1);
          setTitle(title);
          StackPane root = new StackPane();
          Scene scene = new Scene(root, 750, 750);
          setScene(scene);
          GridPane gridpane = new GridPane();
          gridpane.setPadding(new Insets(5));
          gridpane.setHgap(5);
          gridpane.setVgap(5);
          TableColumn firstNameCol = new TableColumn("First Name");
     firstNameCol.setMinWidth(100);
     firstNameCol.setCellValueFactory(
     new PropertyValueFactory<Person,String>("firstName")
     TableColumn lastNameCol = new TableColumn("Last Name");
     lastNameCol.setMinWidth(200);
     lastNameCol.setCellValueFactory(
     new PropertyValueFactory<Person,String>("lastName")
     table.setItems(data);
     table.getColumns().addAll(firstNameCol, lastNameCol);
     table.setOnMouseClicked(new EventHandler<MouseEvent>() {
               public void handle(MouseEvent me) {
                    if (me.getClickCount() >= 2) {
               String srr = table.getItems().get(table.getSelectionModel().getSelectedIndex()).getLastName();
               value = srr;
               dialog.hide();
     gridpane.add(table, 1, 5,1,20 );
          root.getChildren().add(gridpane);
     public static String showDialog(Stage stg, Boolean a , String title){
          dialog = new TableClass( stg,a, title);
          dialog.show();
          return value;
}

Cross posted
http://www.coderanch.com/t/582014/JavaFX/java/populate-TableView-data-other-screen
http://stackoverflow.com/questions/10734649/how-to-populate-tableview-data-on-the-other-screen-textfield-in-javafx-2-0
Moderator advice: Please read the announcement(s) at the top of the forum listings and the FAQ linked from every page. They are there for a purpose.
Then edit your post and format the code correctly.
db

How to populate the calculated value into screen field.

I am doing one enhancement in QM.I have added one custom screen to notification transaction ( QM01/QM02/QM03) transaction tab strip control using the enhancement QQMA0001.The Details of the calling and called screens as shown bellow
The Calling screen: SAPLIQS0
Screen Number: 7790
Screen Area :USER0001
Called Screen: SAPLXQQM
Screen Number: 0101
I have developed the Custom Screen in screen 0101 and called in PBO of program SAPLIQS0 7790 screen.
The Screen in calling perfectly .The Custom screen having different fields like Raw cost, Intermediate cost, Finished cost, SCAR Cost and Sales Order Cost Etc... These fields are out put filed types. No input for these screens.. I have few doubts regarding this
How to populate the calculated values in Custom screen?
Where we wrote the code to populate the calculated values in custom screen?
You have any idea please guide me
Thanks & Regards,
Samantula

As your screen fields should be global variables in SAPLXQQM, you may initialize them by implementing function module EXIT_SAPMIWO0_008 which also belongs to SAPLXQQM (Customer Exit: Transfer Notification Data to User Screen)

How to populate the data in fields if we tab out at one field

Similar Messages

Maybe you are looking for