How to popup editor for every record?

hi
i want to popup the editor for every record changed .
It is a mutli record block.
I tried it using in pre record trigger using
go_item(the field name');
but it is saying illegal restricted porcedure using go_item in the the block level trigger.please someone help me .
sudharshan

I want to do this logic
while querying the records and when-new-record-instance trigger is not firing can someone please help me how to do this.
Thankyou
sudharshan

Similar Messages

To genrate individual file for every record.

Hi Experts,
I am receiving a message with multiple records. I need to generate individual files for every record.
How can it be done?
Thanks
Karthik

Bhatia,
FCC is file content conversion. If your sender communication channel is file and the file is any fixed length or with any separator then you can use this option in your file sender communication channel.
Regards,
---Satish

Getting message for every record while pressing down arrow key:apps form

Hi,
when i query the form and when I am going through the records by pressing the down arrow of the keyboard I am getting the message 'Do you want to Save the records' for every record even though i did not update any record
How to avoid the message?
I developed the form in oracle applications and it is a master detail form which have a header block and lines block.
thanks & regards
Deekshit

Hello,
You can review the following;
https://metalink.oracle.com/metalink/plsql/f?p=200:27:627127677634310554::::p27_id,p27_show_header,p27_show_help:173383.995,1,1
Hope it helps.
Adith

Getting message for every record while pressing the down arrow

Hi,
when i query the form and when I am going through the records by pressing the down arrow of the keyboard I am getting the message 'Do you want to Save the records' for every record.
How to avoid the message?
I developed the form in oracle applications and it is a master detail form which have a header block and lines block.

You are probably changing a value in POST-QUERY trigger, check your trigger and make sure you're not updating any values.
For Oracle Apps specific questions, I suggest you post in the E Business Suite section of the Forums.
Tony

Text/Label issue - being repeated for every record inside repeating frame.

Hi
I have a small issue:
In the repeating frame, the label (text) for the column is being repeated for every record. How may I have the text (label) appear just once and not for every record?
Thx!

Move headings outside of the repeating frame.

Number for every record that is retrieved from (query)

Hello
I wish to put a number for every record that is retrieved
from the record that is output by this query
For example
For the first recored/row
Generated number, ksnumber, date
1, gg111 11/05/05
2, oo235 12/06/05
the query returned 2 records 1 and 2 are the number that is
generated with this code.
In addition if there is a built in function, where in the
code do I put it???
<cfquery name="gelov datasource="kl90">
SELECT
FROM
WHERE
ORDER BY
<cfswitch expression="#Form.orderBy#">
<cfks value="KSNUMBER">
KS.KS_NBR
</cfks>
<cfks value="CREATIONDATE">
KS.KREATDAT
</cfks>
</cfswitch>
</cfquery>

<cfswitch expression="#Form.outputFormat#">
<cfks value="HTML">
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Ctwye Kss Report</title>
</head>
<style type="text/css">
table{
font-family:Arial, Helvetica, sans-serif;
font-size:10px;
td{
font-family:Arial, Helvetica, sans-serif;
font-size:10px;
th{
font-family:Arial, Helvetica, sans-serif;
font-size:10px;
h2{
font-family:Arial, Helvetica, sans-serif;
font-size:12px;
h3{
font-family:Arial, Helvetica, sans-serif;
font-size:13px;
</style>
<body>
<cfoutput>
<table border="0" cellpadding="3" cellspacing="0">
<tr>
<td align="center">
<h3>Ctwye Kss
Report</h3><br><br></td>
</tr>
<tr>
<td align="center">
</h2>report returned #getCtwyeKss.RecordCount#
records</h2></td>
</tr>
<tr>
<td>
<table border="1" cellpadding="2" cellspacing="0">
<tr>
<td width="160">Ks Number</td>
<td>Creation Date</td>

</tr>
<cfloop query="getCtwyeKss">
<tr bgcolor="<cfif currentrow mod
2>GHOSTWHITE<cfelse>WHITE</cfif>">
<td>#KS_NBR#</td>
<td>#dateformat(KREATDAT,"mm/dd/yyyy")#</td>
</tr>
</cfloop>
</table>
</td>
</tr>
</table>
</BODY>
</HTML>
</cfoutput>
</cfks>
<cfks value="CSV">
<CFHEADER NAME="Content-Disposition" VALUE="attachment;
filename=ctwye.csv">
<cfcontent type="application/msexcel">"Ks
Number","Creation Date"
<cfoutput
query="getCtwyeKss">#ltrim(KS_NBR)#,"#dateformat(KREATDAT,"mm/dd/yyyy")#"
<tr #IIF(getCtwyeKss.CurrentRow MOD
2,DE(''),DE('backgroundColor="##999"'))#>

</cfoutput>
</cfks>
</cfswitch>

<cfks> is not a Coldfusion tag. Use <cfcase>
instead.
The following code will print the row numbers
<cfquery name="gelov" datasource="kl90">
select ksnumber, date
from yourTable
</cfquery>
<cfoutput query="gelov">
#currentrow#, #ksnumber#, #date#<br>
</cfoutput>

How to set password for every application

Hi,
As a administrator how to set password for every weblication in sharepoint 2013.
Is there any way to set?
Thanks,

Who's password are you trying to set? Please provide more details.

Page headers repeat for every record on *.CSV export in Crystal 8.5

I am a MAS 90 reseller. I have encountered this issue:
When I try to export a report to a *.csv format in Crystal Reports version 8.5 page headers repeat for every record in the export file. The Sage MAS 90 database provides this solution:
This is a known Crystal Reports issue. Download U2FSEPV.DLL, version 8.6.2.475, dated 11/28/2003 from the Business Objects Web site. For more information and a download link, see knowledgebase article c2014451 at support.businessobjects.com
Note: Be sure to select the download link for Crystal Reports 8.x.
I cannot locate this download anywhere in the new SAP site. Can anyone direct me to this download?
TIA for your help!

I was finally able to get the uploaded file by right clicking on the file and selecting Save As. However, when I replace all instances of this dll file with the new one (renamed as directed) I continue to get headers in the CSV file.
This does not resolve the issue of getting headers only in the output. Is this the correct dll file or is there another issue causing this output error?

Access 2010 Chart - Report returns an identical chart for every record in the underyling query

Hi there, I hope someone can help me with this. I've created a stacked column chart in a Report. The chart seems to be working fine but my report is returning a chart for every record in the source query. The chart adds up the days each vehicle in
a fleet was used in a given time frame. I'm not a code writer so wizarded my way to the following:
TRANSFORM Sum(QVehicleDaysUsed.[DaysOfUseThisMonth]) AS SumOfDaysOfUseThisMonth SELECT QVehicleDaysUsed.[YearMakeModelPlate] FROM QVehicleDaysUsed GROUP BY QVehicleDaysUsed.[YearMakeModelPlate] PIVOT QVehicleDaysUsed.VehicleUseForMonthStarting;
The chart seems to be producing exactly what I want but it's repeated once for every record in the source query. I don't know if this is the issue but I don't have a Master/Child field linking the chart to the report it's in - chart is unbound and therefore
won't allow me to link fields. I'd sure appreciate any help you can offer! Thanks!
(Incidentally VehicleUseForMonthStarting is a date field - ideally it should be shown as a DatePart MMMM but for whatever reason Access is balking at the Format expression.)
Thanks!

GOT IT! Hurray. Obvious after giving it more thought... I had to make the report the chart was in Unbound. :) Leaving post up in case it helps someone else out.

How to create checkbox in WAD for every record

Hi All,
We have a requirement where in the user selects some of the records from the IP screen and he should be able to see only those selected records and also should be able to plan on the same. So how can i create a checkbox in WAD for each and every record. If this is not possible through check box then are there any other options to achieve this. Request your valuable inputs.

Hi,
Not sure if you can create a check-box in wad but for sure you can set properties of the table in which you display your data. There should be something like "Selectable rows" (don't have access to the system now). When you switch it on you will be able to select rows of your report. Then you need to set filter based on the selection you made.
Tomasz

How to fire a query for every record in a table, pass values in a loop

Hi,
For each record in a table, I want to loop through each record and then fire a query by passing acct, product and date from this table to the where clause of the query. I would have to create a pl/sql block..The output of the query I want to spool from sql developer.
I need the exact syntax please for doing this.. since i am new to Oracle. Just the template will be enough. I will fill in the query.
Any help is appreciated as always..
Regards,
hena

904385 wrote:
Hi,
For each record in a table, I want to loop through each record and then fire a query by passing acct, product and date from this table to the where clause of the query. I would have to create a pl/sql block..The output of the query I want to spool from sql developer.
I need the exact syntax please for doing this.. since i am new to Oracle. Just the template will be enough. I will fill in the query.
Any help is appreciated as always..
Regards,
henaHave you ever considered using a JOIN ? It does the same thing as looping through a table and applying that to the where clause of a select on a query, only much, much, much faster and without the need to write any code. SQL is a declarative language, so you specify what you want and not how to do it. It can be bit of a journey to change your thought process if you come from a procedural or object world, but once you get there it's a beautiful view.

How to get index of cluster and make popup vi for every event

Hi
I have problem. the problem is i have to find out the index of cluster.
I have an event "mouse down" from this cluster and index should be the value where i put my mouse.
2nd thing is curently i am just abel to display only 1 popup. but i need each pop up for every every element where i move my mouse
thanks in advance.
BR

altenbach wrote:
Use a "value change" event on the array and do a "not equal" on the old a new value. Only the changed value will result in a true. Use search array to find the TRUE in the "not equal" array and the resulting index points to the changed element. You can do basically the same with clusters, by using "cluster to array" at the right time.
Here's what I had in mind (LabVIEW 8.2)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
DetectElementChange.vi ‏17 KB

Checking for every record in a table using PL/SQL

Hello Gurus,
I would need your help in finding the best approach to tackle the below analysis using PL/SQL.
I have a table which contains two columns
UserID and Month
I want to find out the users who made orders every month for the first half of 2012.That is the User ordered on Jan 2012, Feb2012 ... and June 2012.
The Table is huge and has more than a million records. How do I approach this in PL/SQL.
Joe

Hi Justin,
Thanks for the quick response. This is helpful.However my Intention is to do it using PL/SQL for learning purposes. I am new to PLSQL.
I wanted to do something like looping through each records in the table for every user ID and If I find orders for six consecutive months for a particular user, I will insert the user id to a temp table.
Any hints on how can I use this? I heard about cursor. Can I use it. If so how should I approach.
--Joe

How create dynamic URL for every row shown in the report?

Hi,
Iam new to this Application. I created one interactive report to find the number of bugs logged for every product and its sub component for past one year. The report will look like below structure in the application.
Product Subcomponent Total
P1 S1 10
P2 S2 4
P2 S21 15
Now i want to pick the value of Prouct and sub component for every row dynamiaclly and want to generate the URL with the conditions and make it as hyperlink for the Total Column.
Iam able to make hyperlink for the Total column using the edit options for the total attribute, but it is opening the same page for all the rows in the total column. I want to generate dynamic URL by picking the value prodcut and sub componenet dynamically from the report for every row and want to make it as hayperlink for every row individually.
Please tell me how to do this?
Please revert back if you are not clear. Appericiate for your quick help.

Hello <unknown user>,
So you already set the Column Link attributes for your Total column. Should all links go to the same page, but with different parameters (ProductID, SubcompID)? Or to another page? And how can you determine that page?
Assuming you'll go to a sort of detail page or form:
Target = [Page in this app]
Page = <your target page no>
Item1 = <ProductID field in target page>
Value = #PRODUCTID#
Item2 = <SubcompID field in target page>
Value = #SUNCOMPID#
(you can use the ' flashlight' for getting the correct values)
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

How to display image for every article in smartforms

DEAR GURUS ,
i want to display material
(mara-matnr) as well as its image for every material in a smartform .how will i code for this and where will i store my image .
full points will be awarded for the solution . plz send any sample code .
THANKS ,
AMIT RANJAN .

hi,
upload logos using se78 transaction.
then create a window in ur smartform and insert that graphic.
for sample codes check these examples.
SF_EXAMPLE_01
SF_EXAMPLE_02.

How to popup editor for every record?

Similar Messages

Maybe you are looking for