How to port forward in windows server 2012 ? for IIS

Hi,
I have windows server 2012 in AWS cloud (Public IP)
Installed IIS 8 and running website in the port 8980 and its working fine (Public IP)
My question is
I have CNAME record in Godaddy in the name of example.com which is pointed to my PUBLIC IP ... its working fine.
But I want to know how to port the 80 request to 8980 in windows server 2012 thanks.
Wes

Hi,
According to your description, my understanding is that you want that example.com(in Godaddy) to transfer corresponding queries(port and website name) to the website on WS 2012(in AWS cloud).
Since your domain example.com is supported by Godaddy, I recommend you to contact the supporter of Godaddyand confirm that if their product supports port forwarding.
In general, if you useWindows ServerInstruction, we may enable NAT(Routing and Remote Service) on network interface to redirect services/ports.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2

HI,
I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
Setup is unable to proceed due to the following error(s):
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Regards
Anil Kumar

You really need to do what error is suggesting.
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Nosh Mernacaj, Identity Management Specialist

How to open all ports on a Windows Server 2012 VM

Hi I am wanting to open a range of endpoints ports (approx 900) for my Windows Server 2012 VM on Azure. This is the range 54363 to 55263 how can i do this I know that azure has a limit of 150 endpoints. Can I open all ports instead?
Please any help with this would be appreciated

Hi,
I don't familiar with this topic, I find a feedback similar with this issue, please see more at:
http://feedback.azure.com/forums/216843-virtual-machines/suggestions/3995978-allow-to-open-more-ports-that-the-150-ports-limit , it seems that this new feature has been fixed, please have a look at Corey Sanders's response, and see this new update at:
http://azure.microsoft.com/en-us/updates/virtual-machines-instance-level-public-ips-now-in-preview/ , hope this helps, if not, or you have any further questions, I suggest you move to Azure VM forum for a better support, azure VM forum link is:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=WAVirtualMachinesforWindows
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to RDP access my Windows server 2012 system with Windows 7 system

In the VMWARE workstation, I have a " Windows server 2012" & " WIndows 7" OS deployed. I am not able to RDP the " Windows server 2012" from "Windows 7" system even though i have performed the below step.
1. Enabled the " Allow Remote Connections to this comptuter " in windows server 2012
2. Disabled the firewall in Windows server 2012.
Can someone advice me on the below.
1. How to RDP my windows server 2012 from my Windows 7 with " Firewall disabled" & "Firewall Enabled" conditions

Hi,
Just make sure that the firewall is disabled in all three profiles Domain/Private/Public.
Create a incoming UDP rule on firewall to allow port 3389 and give a try.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b1ec4602-7120-4660-a1ba-e05289a479cf/windows-2012-r2-firewall-blocking-remote-desktop?forum=winserverTS
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Adobe Update Server Setup Tool on Windows Server 2012 and IIS 8 ?

can you help me install and configure my internal AUSST on the new server OS provided by Microsoft (Windows Server 2012)?
What should be the parameters required (or mandatory) in IIS 8 (ISAPI Filters, etc ...) ?
What parameters in the installation of IIS should be chosen?
What are the steps necessary to implement this new operating system?

Our enterprise also uses an authenticated proxy, so I've been banging my head to get this working!
I'm surprise to learn of this proxy oversight! This tool has "enterprise" all over the documentation (e.g. AAMEE?). There's good likelihood that other enterprises (still) have proxies in place. Makes me wonder if the CreativeCloud architects had this same proxy-ignorant oversite?
@Abhishek
Can you pass this request onto Jody Rogers or Karl Gibson (or whomever "owns" Adobe Enterprise Deployment products)?
I can pass the following curl switches and get out of our authenticated proxy; why can't you make AdobeUpdateServerSetupTool2.0 honor these curl options?
[Note: this example assumes Mac OS X or other Unix-y OSes]
curl --proxy myproxy.domain.com:port --proxy-user ADserviceAccount http://swupmf.adobe.com/webfeed/oobe/aam10/win/updaterfeed.xml
BTW: why does "mac" in xml feed return so much more info?
curl --proxy myproxy.domain.com:port --proxy-user ADserviceAccount http://swupmf.adobe.com/webfeed/oobe/aam10/mac/updaterfeed.xml

Migrating From Window Server 2003 to Window Server 2012 for Web server deployment and Developmemt Machine is on Window Server 2008

Hi Microsoft Team,
We need your urgent advice and that is also on priority:
Issue Description: We need to migrate from
WINDOW SERVER 2003 to WINDOW SERVER 2012 while the development activity will be carried
under WINDOW SERVER 2008 as DEVELOPMENT BOX.
.NET Framework Version: 3.5 ( For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
IIS Version: 7.5 (For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
Need your quick advice Is that configuration feasible for Development and
Deployment (Web Server).
Highly appreciate your response as this will depend which product we need to buy also if you feel any showstopper or concern. Please let us know.

Hi,
As suggested by Tim, in order to get better assistance, we can ask for help in the following IIS forum.
IIS Forum
http://forums.iis.net/
In addition, regarding migrating from Windows Server 2003 to Windows Server 2012, the following blog can be referred to for more information.
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Best regards,
Frank Shen

How to install itunes on windows server 2012

I am trying to instal itune on my server please help me

Hi,
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
Cataleya Li
TechNet Community Support

Prepare sharepoint 2010 with sp2 environment on windows server 2012 R2

HOw prepare sharepoint 2010 with sp2 environment how i install sharepoint 2010 with sp2 in a windows server 2012
i mean
from scratch i just prepared a windows server 2012 R2 vm
and i set all required roels (Appserver,webserver etc) according to this link
http://social.technet.microsoft.com/wiki/contents/articles/12502.how-to-install-and-configure-windows-server-2012-for-sharepoint-2010.aspx
and i have sharepoint 2010 set up, and i downloaded sharepoint 2010 sp2
from this link
http://www.microsoft.com/en-us/download/details.aspx?id=39672
now should i install sp2 and install sharepoint 2010 binaries?
adil

SharePoint 2010 has no supportability statement for Server 2012 R2. I would not use it until Microsoft releases a supportability statement.
Even it has no supportability for server 2012, but sharepoint 2010 running fine in my server 2012 test environment
adil
You indicated you were using 2012 R2. SharePoint 2010 supports Server 2012 (non-R2) with SP2 media, but has no supportability statement for Server 2012 R2.
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Windows Server 2012 Hyper-V network latencies

Hi All,
I have an issue with our Windows Server 2012 Hyper-V hosts that I can't seem to figure out. Situation:
2 x Dell PowerEdge R815 servers with AMD opteron 6376 16 core CPU's and 128 GB RAM running Windows Server 2012 with Hyper-V.
2 virtual machines running on the same physical host and connected to the same virtual switch show high TCP connection latencies. One virtual machines runs a SQL Server 2012 database instance and a Dynamics AX 2012 R2 instance. The other machine a
SharePoint 2013 instance and the AX client. We see latencies of 20ms and higher on most of the TCP connections that are made from the sharepoint machine to the sql server machine.
At first I thought it might have something to do with the physical NIC's. It turned out that VMQ wasn't correctly supported by the firmware of the Broadcom BCM5709c cards. By default this setting is enabled. Turning off the VMQ setting somewhat improved
the situation but the latencies are still at 8ms and higher.
What I don't understand is what influence enabling/disabling VMQ should have on network performance. As I understand it now virtual machines connected to the same virtual switch bypass the physical altogether. Another point is that VMQ should actually improve
performance, not decrease it.
Another question I have is about the various tcp offloading settings on the physical NIC's. After installing the new firmware and drivers from Dell most of these settings are set to disabled. The documents I have been able to find talk about Windows Server
2008, any thought how these settings relate to Windows Server 2012 and whether they should be enabled?
Thanks in advance for your time and thoughts
Kind regards,
Dennes Schuitema

Hi Denes,
Please try to update your BroadCom NIC driver version ,the newest version should be 7.8.51
For details please refer to following link :
http://www.broadcom.com/support/ethernet_nic/netxtremeii.php
Best Regards
Elton Ji
If it is not the answer , you can unmark it to continue .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Troubleshoot problems with installing updates on Windows Server 2012 Standart Edition

When trying to install last update, receiving next errors:
Installation Failure: Windows failed to install the following update with error 0x80070020: Cumulative Security Update for Internet Explorer 10 for Windows Server 2012 (KB3003057).
Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978127).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2982998).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2993958).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3002885).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3010788).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2978121).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3006226).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3005607).
Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB2975331).
Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB3008627).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3011780).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3003743).
This problem reproduced on all my web-servers (Windows Server 2012 Std). How can I fix these problems

Hi,
Windows update error 0x80070020 can occur if a program is interfering with the automatic update process.
Restart your computer or restart your computer in safe mode with network, then try to install the updates. Detailed information you may reference the link below(this applies also to Windows Server 2012 ):
You receive error 0x80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install updates
http://support.microsoft.com/kb/883825/en-us
If the problem still exits, open Run, type %windir% and hit
Enter, find a text file named WindowsUpdate, uploaded the log file.
Best Regards,
Eve Wang

Windows Server 2012: SMB share with transparent failover

Have a nice day to all!
I have 2 HP Proliant DL380P Gen8 servers containing 8 x 1TB disks (with P420i HP Smart Array RAID Controller) in each server.
So, there are 2 arrays on every server:
1. 2 x 1TB in RAID1 (+1 disk for hot swap) - system volume
2. 5 x 1TB in RAID5 (+1 disk for hot swap) - data volume
And I installed Windows Server 2012 Standard on each server.
Than I created a failover two-nodes cluster.
And now I want to create a SMB share with transparent failover for all the second (data) volume (it's about 3.3TB in RAID5 array). How just can I reach this goal? I'm going to use it in future for Hyper-V VMs, so, the main reqirement is powered-on and working
VMs even if one node of SMB share cluster is failed.
I wasn't able to see my volumes in failover cluster manager. I tried to create iSCSI targets, storage pools, virtual disks, etc. but no luck. My failover cluster manager can't see it to create SMB share!
Can anyone advice me something?
Thanks in advance!

Have a nice day to all!
I have 2 HP Proliant DL380P Gen8 servers containing 8 x 1TB disks (with P420i HP Smart Array RAID Controller) in each server.
So, there are 2 arrays on every server:
1. 2 x 1TB in RAID1 (+1 disk for hot swap) - system volume
2. 5 x 1TB in RAID5 (+1 disk for hot swap) - data volume
And I installed Windows Server 2012 Standard on each server.
Than I created a failover two-nodes cluster.
And now I want to create a SMB share with transparent failover for all the second (data) volume (it's about 3.3TB in RAID5 array). How just can I reach this goal? I'm going to use it in future for Hyper-V VMs, so, the main reqirement is powered-on and working
VMs even if one node of SMB share cluster is failed.
I wasn't able to see my volumes in failover cluster manager. I tried to create iSCSI targets, storage pools, virtual disks, etc. but no luck. My failover cluster manager can't see it to create SMB share!
Can anyone advice me something?
Thanks in advance!
You need to have your storage you want to export as being a shared storage visible to your cluster (part of CSV). Then you'll configure failover file shares using content accessible from both cluster nodes. Refer to this manual for diagrams (ignore StarWind
and replace it logically with your existing shared storage you've used to create your cluster):
http://www.starwindsoftware.com/configuring-ha-file-server-on-windows-server-2012-for-smb-nas
Also see these manuals from MS on how to create failover file server:
http://technet.microsoft.com/en-us/library/cc753969.aspx
http://technet.microsoft.com/en-us/library/cc731844(v=ws.10).aspx
http://blogs.technet.com/b/askcore/archive/2010/08/19/working-with-file-shares-in-windows-server-2008-r2-failover-clusters.aspx
However if you want to use existing storage located on the both nodes you're out of luck. Microsoft does not provide anything representing local DAS to the cluster nodes. If you want to use existing DAS then you'll have to stick with a third-party product
like StarWind, SteelEye or DataCore. To create something like in this picture:
So you'll have a configuration with only two nodes, no physical shared hardware (SAS JBOD, FC or iSCSI) and vSAN. Refer to this manual:
http://www.starwindsoftware.com/ns-configuring-ha-file-server-for-smb-nas
Hope this helped :)
StarWind iSCSI SAN & NAS

DirectAccess in Windows Server 2012 R2

DirectAccess related questions:
1. Does DirectAccess have API and scripting support for integration with BigIP for Loadbalancing.
2. Can DirectAccess be implemented as "Software as a Service" model where the same infrastructure can be used to give service to multiple customers? Can
DirectAccess solution can be delivered as a shared solution (Common implementation)?
3. Can DirectAccess Server be integrated with Active Directories of multiple customers?

Hi,
Direct Access is a remote connection technology introduced in windows 7 and windows server 2008r2. It is similar in concept to traditional VPN but has several advantages.
Direct Access rely on AD DS, but install Direct Access on DC is not recommended.
For your information:
How to Configure DirectAccess in Windows Server 2012 to Work with an External Hardware Load Balancer
http://blogs.technet.com/b/mspfe/archive/2013/01/24/how-to-configure-directaccess-in-windows-server-2012-to-work-with-an-external-hardware-load-balancer.aspx
Using DirectAccess
http://technet.microsoft.com/en-in/windows/dn168168.aspx
Hope this helps.

How to port forward?

I can't figure out how to port forward my Minecraft server.
Help?

The steps are listed here.. for aebs but same difference.
https://discussions.apple.com/message/16689298#16689298
I would use the 5.6 utility as the 6.0 or 6.1 in Lion is a dog.
http://support.apple.com/kb/DL1482
The TC has to be the main router for this to be relevant. If you have another router or double NAT.. you will need to port forward on the main router and eliminate double NAT.

Installing terminal server role on windows server 2012 to use for Windows server 2008 R2 machines.

Dear
Our current setup is as follows :-
Active Driectory is in Windows Server 2003.
Citrix Xenapp version 5.6 with all Xenapp servers in Windows Server 2003
Now we are upgrading our Citrix farm to 6.5 and all Xen app servers into Windows Server 2008R2.
We did the configuration and testing; everything works fine except the terminal server is not configured which gives the pop always for the expiry date.
We do have license for 2012 terminal server which is not possible to downgrade for some reason and managent need to install new Windows Server 2012 for terminal server and activte the licenses.
My question is :-
1 Whether Windows Server 2008 R2 will get RDS cal license from Windows Server 2012 terminal server (RDS CAL license is of windows server 2012).
2. What is the role and features I need to activate in Server 2012 in order to use for Citrix 6.5 (only applicable fetaure for getting the RDS cal license.)
3. Whether I can add this 2012 server into domain. Is it possible to add 2012 server into Windows Server 2003 AD.
Your early reply is highly appreciated.

Thanks Jeremy..
I got exactly the right answers I am lookoing for ..
I successfully activated the terminal service on the newly created Windows 2012 Server and installed the retail license pack we had of 50+50+25 keys . It later shows the 125 keys successfully applied.
when I tried to link the Xenapp (Windows Server2008R2) to the license server, it first gives me error that session host service role is not installed on the ternial server. So I installed that role also in the terminal server.
But now its anothee error as below.
RDS Cals are not available for this Remote Desktop Session host server, and licensing Diagnostic has identified licensing problems for the RD session host server.
1. Is it wrong I did by installing session host server role into the terminal server (but really it gave me error like 'session host server role is not running on the license server' when I tried to link the license server).
2. Is it the problem that Windows Server 2008 R2 will not get license from 2012 RDS CAL license.
3. whether Clearing house will take time to update the license.
Your reply is highly appreciated. I need to know whether any other way I can link the Windows Server 2008 R2 Servers (Xenapp) to the license server.

Maximum number of processor sockets in Windows Server 2012 Datacenter and Standard

I have found no documentation on the technical number of supported processor sockets supported by Windows Server 2012 for the Standard and Datacenter editions.
Some donation websites like Techsoup claim that Datacenter supports 64 physical processors and Standard 8, but I can find no authoritative confirmation of this and those look like extrapolation from Windows Server 2008 R2.
So what are the maximum supported # of processor sockets, assuming you have licenses for all of them, for Datacenter and Standard? Do they differ by edition?
In addition, is it true that the total # of supported logical processors in a single system is 640 w/o Hyper-V? It was originally reported to be that, but since Hyper-V's number doubled from 160 in the Beta to 320 in the RC and RTM, did this double too?

You might find some of the information you are looking for here -
http://download.microsoft.com/download/2/C/A/2CA38362-37ED-4112-86A8-FDF14D5D4C9B/WS%202012%20Feature%20Comparison_Hyper-V.pdf. I know there is one change that is not reflected there. Recently the maximum number of virtual machines supported
in a cluster was raised to 8,000 instead of the 4,000 reflected in this document.
The maximum number of sockets for Standard would be two because that is the maximum number that the license supports. Standard has never supported 8. Prior to 2012, it supported 4, and then the licensing changed with 2012 so that Standard would
be sold per processor (socket) with a maximum of two. Technically, the binaries are the same for Standard and Datacenter, so you can most likely get it to run with more somehow, but it is not a supported configuration.
The maximum number of sockets for Datacenter would be 64 - that has not changed from 2008. I make this statement based on the fact that Datacenter supports a maximum of 64 virtual CPUs when run as a virtual machine. Virtual machines don't have
the distinction of socket versus hyper-thread versus core. They see what is presented to them as a processor. But, I doubt very much that you will find any off-the-shelf 64 socket systems; most vendors are relying on the core densities instead
of socket density in order to deliver the horsepower. The above referenced document still shows 320 as the maximum number of logical processors, with or without Hyper-V.
tim

How to port forward in windows server 2012 ? for IIS

Similar Messages

Maybe you are looking for