How to port forward on time capsule for share center dlink?

Hello, I have just bought a Dlink ShareCenter, and have not been able to get everything to work correctly , all of the videos are from the older version, the steps are not compatible with the new airport app, I want to open 21 and 8 , they have to be open so that I can access my files outside , can I please get help with this please ,thank you. i provided an image at the screen that I am not sure what to plug in.
https://www.dropbox.com/s/5yl5c86xfll0rkr/Screen%20Shot%202012-06-07%20at%208.20 .59%20PM.png

Please explain the whole network..
Start with the modem.. what broadband do you have?
What modem and is it a modem router or straight modem?
Is the share centre using dhcp or static IP?
I am not sure how sensitive the TC is to port forwarding to static IP addresses but if it works ok, then use that.. simply set the Dlink to
10.0.1.254 as its IP.
255.255.255.0 as its subnet.
10.0.1.1 as both gateway and dns.
This is assuming the TC is at its default address. if not it won't work.
From the summary page tell me what IP the TC is at.
In the port forwarding box you use that IP.. 10.0.1.254
Use same port in as out.. and it makes no difference if you fill in both udp and tcp. Apply it and then apply port 80.
If it still fails, it has to be something else.
Are you using 5.6 utility??

Similar Messages

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

Manual port-forwarding to Time Capsule behind firewall (NVG589)

A happy new year to all. I'm writing seeking help with my computer setup in a well-connected home. In short, here is what I want to do: I want to get access to my latest-gen Time Capsule (wireless AC) from outside my house, so that I can read or write files on the 2TB HD on my time capsule, using the Back to My Mac feature in the Time Capsule (with my Apple ID). I have no interest in sharing screens or anything else, just in the data on the drive.
Now, my current setup, which otherwise works like a charm.
ATT Uverse's Motorola NVG589 is the incoming modem/gateway/firewall for my entire house (using their 'Power' service, the fastest): it is possible via various tricks and hacks to put the NVG589 into 'near-bridge mode' or to root the modem via and exploit and through it into full bridge mode (which the Motorola NVG589 is capable of, but ATT does not expose that functionality [imagine the tech calls!]). I'm resisting the temptation to do so, because I don't want to the run the risk of messing up service to our house, and a call to ATT tech support. If it ain't broke, don't fix it.
The Motorola NVG589 has its DHCP service on and doles out IP addresses to everything else in the network (thankfully it also has a hidden mDNS system, too, allowing me Bonjour functionality inside my whole house). The Time Capsule, however, has a static-IP that I've assigned, and I also have a DHCP reservation for the Time Capsule in the NVG589's DHCP table.
One crucial thing is that the Motorola NVG589 does not expose UPnP or NAT-PMP to the user, which means that I'll have to do the work manually to allow externally-originating traffic to pass through the Motorola NVG589 to the Time Capsule.
Apple's latest Time Capsule 2TB unit, in bridge mode, so that its IP address is the one given it by the Motorola NVG589 (192.168.1.x, not the usual 10.0.0.x that the TC would give out were it the router). No double-NAT, in other words. The Time Capsule is solely a wireless access point and a passive shared disk (and my target for Time Machine on my Mac).
Nothing else on my home network needs to be accessed from the outside world, no gaming, no servers, no Back to My Mac for any individual Mac computer (we have four).
So what I'm looking for is help knowing what holes to poke into the NVG589's firewall to direct to my time capsule. I've searched through many docs here on Apple's support site, and the number of potential ports I could open is dizzying. Security concerns require that I open the necessary ports, and no more.
I'd be grateful for any help.

LaPastenague,
I connected one of devices that I was trying to reach directly to the U-Verse modem and the port forwarding doesnt work anymore. This must be somthing in the way I reconfigured the U-Verse modem to work with my new TC, becuase it used to work jsut fine.
I have a U-Verse modem model number 3801HGV. I have a new TC with a 3TB HD but I don't know the specifcs of what generation is it. It is new and dual band WiFi... that is why I am trying to use it as a wireless access point behind my At&T modem/router.
As far as the details go, I will explain. The port forwarding worked before I added the TC, so I'm sure I just dont have them working together yet. The devices that I want to reach from my iPhone and iPad are a Foscam 8910W IP camera, and a Neptune Apex aquarium controller. Both devices have static IPs and configured with ports 8080, and 8090 respectivly. The IP camera is connected to the TC wirelessly and the Apex is a little different...it is connected to a Sonos (wireless music media) bridge via a ethernet patch cable. The Sonos bridge is connected to the Sonos wireless network (assume it is a dedicated frequency) which originates at another Bridge that is physically connected to the TC with a ethernet cable. Sounds weird, but it works as that is one of the features the the Sonos has is to offer. I think it is similar to a wirless gaming adapter in that sense.
As far as port fowarding goes, I configured within the U-Verse router to open up the two IP ports 192.168.X.X:8080 for the Apex and 192.168.Y.Y:8090 for the Foscam in the Firewall section called "Applications, pinholes and DMZ". I would use my cellphone when away from home by putting my public IP along with the correct port number to get access to the assocated device (ex.99.56.289.34:8080). The phone was on a cellular signal and not tethered to the wireless network. My public IP always stays the same so I don't have to worry about that variable.
Again, all this used to work, but now when I added the TC I cant access it externally. Any suggestions to get this to work would be apprected.
Best Regards

I want to port forward my time Capsule which I use as my router.

For my son I'm trying to set up a Minecraft server and I want to open access via port forwarding. How do I do that? I have seen quite a few directions on the net, but one compatible with the OS X 10.8.3 version.

See this User Tip by forum expert Tesserax to get started.
AirPort - Port Mapping Basics using AirPort Utility v6.x

How do I use my Time Capsule for backup without making it my router?

I've always used my Time Capsule as my internet router (paired with my Time Warner modem) and I've also used it to back up my computer. I just got a new modem, it was a nightmare to set up, and it's supposed to have very fast internet. It's a Time Warner modem / router. In order to set this up and get a new wifi, I had to disconnect my Time Capsule.
Now I would like to connect my time capsule again to back up my computer, but to avoid messing with the internet or changing it again (I may as well try the new one), I DON'T want to continue using my TC as a router. how do I go about doing this? Do I continue to have it connect to the modem via ethernet or do I just plug it into the power source and that's it?
If someone could walk me through the process it would be so appreciated!

Hi Alexandra,
The article linked below details how to go about settings your Time Capsule up as a bridge, which effectively disables all routing functionality (NAT and DHCP services are disabled on the Time Capsule as they will be handled by your ISP's modem/router), and should allow you to utilize Time Machine without affecting your existing network.
AirPort Utility 6.x: Set up a base station or AirPort Time Capsule as a bridge
http://support.apple.com/kb/PH5104
All my best,
Allen

How do I use my time capsule as wifi for my xbox one?

How does one setup a time capsule to use as a home network to allow Xbox one usage as well?

set up the time capsule with an iOS device, a Mac or a PC, and then connect the Xbox to the time capsule like with any other router. however, for some Xbox features, you'll need to do specific setting changes. see this thread: Apparently I need to open several ports on my Airport Extreme to be able to chat on Xbox One.

How to use time capsule for wireless back-up but not internet?

Hello,
I have a tower and recently a laptop at work. The tower is connected to our local network with an ethernet cable and the laptop with wireless. So, the internet connection is fine for both.
I was hoping to use my time capsule to do time machine backups on my laptop. Do you have any advice on how to configure this? I do not want to use the time capsule to extend my Internet, as I believe my work I.T. would prefer to handle all access to their network.
Perhaps there is some documentation about doing this that you could point me to? I have not been able to find it.
Thank you for your help.

Your original question was How to use Time Capsule for wireless back-up but not Internet?
There is no reason for you to connect the tower....or anything else...using Ethernet if your goal remains that same as you stated.
If you are asking if you can backup the Tower using Ethernet, and not wireless, then you can connect the tower to one of the LAN <-> ports on the Time Capsule....not the WAN port.
Yes, it appears to work without plugging into my tower.
Correct, it will work.
I just have to select the network that it created. Of course, I have no access to the Internet while this is happening and it can not auto backup, unless I am on that wireless signal.
As I stated, that is the downside to trying to back up without an Internet connection. You have to establish another network...and backup over that network.
If you are asking if you can stay connected to the work network while also backing up to your non-Internet "private" network, that is not possible.

Time capsule for back-up only. How do you turn off the flashing amber light?

I am using time capsule to back up my work computer. I use internet through an ethernet cable, no wireless (it's my desktop work computer!), so don't need the airport - just back up on time machine.
I figured out (although there is NO information in the time capsule manual) how to set up the time capsule to wirelessly back up my computer, but because I don't have it plugged into the modem, and I haven't set up an airport connection, it blinks amber at me. How do I make it know that it is as set up as I want it to be, so it will be a steady green? Should I edit the airport utility options so that wireless network mode and/or router mode are "OFF"? If I set wireless mode to off, will my computer still "see" the time capsule and back up using time machine?
This might just be finicky on my part, but the flashing light is annoying me!

If you set up the Time Capsule to back up wirelessly, it functions only as a wireless hard drive...with no routing capabilities at all. In other words, the Ethernet ports on the Time Capsule are not enabled, even though you might have an Ethernet cable connected.
Try opening Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click directly on the amber dot
AirPort Utility will display a message with information about why the amber dot is flashing. It might be something like a message that a firmware update is available for the Time Capsule.
Should I edit the airport utility options so that wireless network mode and/or router mode are "OFF"?
No, since the Time Capsule will no longer connect wirelessly if you do this.

How can I test the usb port on my Time Capsule to see if it is working?

Ever since lightening struck nearby (which took out our internet and copy machine) the printer I had connected to the usb port on my Time Capsule in my office has has failed to print through the TC. I can plug the printer directly into my MacBookAir and can print just fine. So there is nothing wrong with the printer nor the usb cable.
I've turned off and unplugged the printer with the usb cable connected & disconnected to the TC, no change. I've unplugged the TC, no change. I've opened the printer utility several times, and always get the "offline" error. I open the print queue, and it says the printer is not connected. I reinstalled the driver for the printer, still the same thing.
I'm starting to wonder if the usb port on my Time Capsule got fried. Any help anyone can give in trying to see if the usb port even functions anymore would be greatly appreciated.
My Time Capsule is model no. A1409.

Power is not likely to be killed .. it is the data components that are more fragile.
So you do have power which as you say is why the USB flashes.. but you don't have signal.
The only other thing you can do is use USB powered hub.. if you have one handy.. but I would not go out and buy one.
A damaged board is impossible (at cost less than replacement TC) to repair. And repairers do not like working on stuff damaged by lightning as components that did survive were stressed.. the transistor junctions become liable to fail at any time.. so you repair it and it just keeps coming back as not working. Sorry if you cannot use it without USB junk it and buy a replacement. A second hand Gen3 is about the best of them it seems.
You can also buy an ethernet to USB print server.. but a new ethernet or wireless network printer is probably near to the same price.
You can hunt ebay for second hand USB print servers.. or airport express, extreme or TC.. often you can find something suitable for just a few dollars if you shop well. Since you don't need the latest greatest to do this sort of job.. and people are disposing of things like USB print servers as soon as they buy network printers.

How to plug a hard drive on the USB port of a Time Capsule. TC in bridge mode

Hello
I would like to connect a hard drive onto the USB port of a Time Capsule. This is for saving files (different frome the Time Machine savings). I am struggling to get it working it seems that I can see the HD when under "drives or discs" (running Snow Leopard in French) from the AirPort Utility but I can't access to it.
The TC is in bridge mode.
Thanks for help and guidances.
Best
Pierre

The question is clear enough.. I just don't understand why you are having issues.
Can you see in the internal disk of the TC in the finder?
What format are you using on this disk? Try and format it HFS+ if it isn't already.
If you plug it directly into the Mac it works ok??
The other issue is the need for a powered hub on the TC due to the low power it gives the internal port.. or lack of bios compatibility with a range of usb hub chips. Try a powered hub as that can also help.

I want to install a new Time Capsule for backups. I also have a B box2 from Belgacom for the digital TV, so how do I install?

Hi,
I want to install a new Time Capsule for backups. I also have a B box2 from Belgacom for the digital TV, so how do I install?

Just setup the TC in bridge.
Assuming you are using Lion.. download the airport utility that has some utility.
http://support.apple.com/kb/DL1482
Then manual setup, internet tab, connection sharing.. off bridge mode.
Then plug the TC into the Bbox and just use it as wireless target for your air.
You can use wireless on Bbox if that works as well, and you might need to juggle wireless channels to get everything working. Having both set to auto is not a good idea.. set and lock channels on one or the other but best is both.. On the TC go to the airport wireless page. change it to manual.. lock the channel. You can use 1, 6, 11 or 13 in ETSI..

I want to replace a four year old Time Capsule for a new Airport Extreme, how difficult is it?

I want to replace a four year old Time Capsule for a new Airport Extreme, how difficult is it? The ADSL connection come from a Modern Router provide by the local Telephone company.

Reply back when you get the new device, but in short, you'll have to put your extreme in bridge mode and just connect the same wires as your current TC.
See here http://www.macobserver.com/tmo/answers/how-to-add-a-time-capsule-or-airport-extr eme-to-an-existing-network-with-br

How can I use my Time Capsule as an external Hard Drive for my PC? My PC can't find it.

Hi, I just bought this Time Capsule for my home. I've got the internet access for all my devices (Mac, iPad, PC, iPhone) and I've got the Mac backup working through Time Machine. I'm supposed to be able to use the Time Capsule as an external drive for my PC, but I can't figure it out. My PC doesn't recognize the Time Capsule as a Network Place. I called AppleCare, but they don't have all the answers for "PC issues." They tried to get me to Map a Network Drive, but my PC popped up a window asking for a Username and Password. It looks like something similar to when I VPN into my company network from home.
I'm using Windows XP Professional, Version 2002, Service Pack 3.
Any help would be appreciated.
Thanks!

Download and install the airport utility for windows.. it isn't strictly necessary but the bonjour service makes life easier.
The request for username and password is correct. Username is whatever you like.. but windows needs it.. so admin.. being the common router one.. password by default is public unless you changed it.
Now to get the TC to work properly..
1. The names should be SMB compliant.. by default they are wrong.. use short names, no spaces no special characters.. pure alphanumeric. That is for TC name and wireless names.
2. Wireless passwords should also be same use WPA2 private.
3. In the disk sharing page.. manual setup.. put in the windows workgroup name.. ie WORKGROUP.. this helps the discovery process.
4. In the same area, turn on the guest account to read and write.. not necessary but helps with later versions of windows particularly.
5. Access the drive by using the direct IP address. ie in Windows Explorer address bar, \\10.0.1.1 (or whatever IP the TC is at).

How to divide time capsule for Mac and PC back up

Want to know if a cant use my time capsule to do back up for my MacBook and do manual back up for the PC of my wife

How to divide time capsule for Mac and PC back up
It is not possible to divide or "partition" the Time Capsule disk......unless you pull the hard drive from the Time Capsule (which voids the warranty), place it in a separate enclosure or caddy, connect the enclosure directly to your Mac, and use Disk Utility to partition the disk. Then, you must reinstall the disk back in the Time Capsule.
This is a lot of work....best done by an experienced technician. The operation will likely cost more than the cost of the Time Capsule.
Life would be tons easier if you used the Time Capsule with your MacBook and added a separate USB drive to the PC.
If you do not need to divide or partition the Time Capsule storage space, and you are willing to have the Mac and PC share the same space, take a look at an application like Macrium Reflect to backup the PC to the Time Capsule disk.
Still, having done this in the past, things would be much faster and easier for you if you use a separate USB drive for the PC.

How to configure Time Capsule for Automatic Backup AND HARD DRIVE USE

I tried to configure Time Capsule for back up and as a hard drive. I record music and need to copy the music myself onto an external hard drive for speed, so I want the TC to double as an external hard drive, and do the back up. I want to be able to open the TC as a hard drive, to open my songs from it. Can it do both?

I finally figured it out. I am able to access my TC from the "shared folder." When I click on it, I get the "connection failed message." I failed to notice the login button in the upper right -- user error due to my Windows based education. The button is very subtle. Once I login, I can create folders and add content.
I didn't see a partition option. Where is that? Just curious.
Thanks!

How to port forward on time capsule for share center dlink?

Similar Messages

Maybe you are looking for