How to post an interest accrual with WHT and consider its effect in the next interest posting?

Hi,
We are using the treasury module for borrowings from Banks & FIs. At the year end, i.e., 31st March, we would like to post an accrual posting with WHT (withholding tax) as per statutory norms. The accrual posting is reset on the next day itself, i.e., 1st April. However, whenever the interest actual posting based on the due date happens, SAP deducts WHT on the full value of the interest posting, instead of the differential value. This results on an excess WHT to the extent of the WHT on the accrual value.
Request you to help me with some solution for the same.
Regards,
Yusuf Sheikh

Hi Yusuf,
as far as I understand, withholding tax (WHT) is only paid at the moment when interest amount is actually paid out.
on the other hand, the accrual of interest represents recognized portion of interest (the total amount according to a contract), but not yet paid out - is it really mandatory to disclose the accrued part of WHT at every End of the Month?
Kind regards,
Renatas

Similar Messages

Resizing text and images with actions and keeping it resized for the next slides, how to?

Hello everybody,
I searched over the net and in this support section for a solution to my problem, but i didnt find any, so...here I am asking you experts.
Through a particular use of different actions I make a logo "compose" in the first slide of my presentation (the logo is composed by text and images that interact), then in the second slide i make it resize so it goes 50% of its size and moves down like a TV logo, in the corner of the slide, and I want it to stay there for all the lenght of the presentation.
It might be a stupid problem, but I didnt understand how to keep it there, 50% of its size and always in that position. If i duplicate the slide I obviously duplicate the 100%-size-logo, not its 50%-size-version, and if i shrink it in order to make it be 50% of its size the text size doesnt shrink so i have to change the text size manually, but the visual effect is imperfect.
Lets summarize:
slide 1: text appears, image appears, the text and the image move and "compose" the logo
slide 2: the complete logo reduces its size to 50% and moves in the lower corner of the presentation, in the place I want it to be for, lets say, 20 slides
slide 3: i want to have this logo already reduced in size and in its position, in the right lower corner, but if i try to group the different parts of the composed logo and i try to squeeze them the font doesnt change its size, I only squeeze the area that the text occupies.
Some help please guys?
Thanks in advance,
Dom-
(add: the problem is kind of similar to this: https://discussions.apple.com/message/9179367#9179367 . the idea of making a slide that contains the logo and text in the exact positions they would be after the move and scale actions is good and that was my first attempt, the probem is that it looks impossible to me to create a second "little" version of the logo that looks exactly the same of the first one that i reduced, so i hope there is some way to tell the app to use "the first logo, only resized the way i want", and thats the point where the problem with the size of the text comes out)

Hi pritam,
The “maintain proportions of window for different monitor
resolutions” property will maintain the proportional size of the front panel
(its x and y sizes) when opened in a different resolution. The front panel
objects will not be resized and will appear larger (and may not fit inside the
front panel) when saved in a higher resolution, and moved to a lower
resolution. You can use the “Keep window proportions” property to achieve the
same results.
To have both the front panel dimensions and front panel
controls scale, you need to have both the above property and the “scale all
objects on front panel as the window resizes” selected. The labels will not be
resized by this.
I tried using both properties on two monitors and noticed
that the change does not occur when the resolutions between the monitors are
different. I had to lower both monitors’ resolution to see the change work
properly.
Please post back if you have any questions. Have a great day!
Ryan D.
District Sales Manager for Boston & Northern New England
National Instruments

I have the photographer plan With Photoshop and Lightroom. Now suddenly The creative cloud app says that Lightroom isn´t installed. It is and how do i fix this. I don´t want to loose any pictures. Tried logging in and out. Also restarted my Imac with no l

I have the photographer plan With Photoshop and Lightroom. Now suddenly The creative cloud app says that Lightroom isn´t installed. It is and how do i fix this. I don´t want to loose any pictures. Tried logging in and out. Also restarted my Imac with no luck.

This has nothing to do with your pictures. As long as LR works, nothing happens. The CC app merely has lost an entry in the installer database. Would a reinstall fix it? Sure. Is it necessary? Not really (until the next version or update). So unless you have too much time to spend or something isn't working, I'm sure you can find more interesting things to do with your tiem. Otherwise use the cleaner tool and get to it:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

HT4623 how do i sync my iphone with new itunes? I cant find the sync button

how do i sync my iphone with new itunes? I cant find the sync button

The same way you would sync with any other version of iTunes.
Connect the device.
Select the device.
Select Sync.
In the new version of iTunes, the sidebar is disabled by default. With a device connected, it will be listed in the upper right hand corner.
If you want the side bar back, type Cntrl + S.

How to create a transport request with query and only with its structure.

HI guru,
how to create a transport request with query and only with its structure.transport request should not include any other query items like ( variables, conditions...etc)
thanks in advance.
venkata

Hi,
Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
Regards,
anil

How do I reboot my iMac in Lion? Right now it opens a black screen with dos and asks me to insert the boot disk.

How do I reboot my iMac in Lion? Right now it opens a black screen with Dos and asks me to insert the boot disk.I recently installed Parallels & Windows 7. Now if I have to turn the system off, it starts up as per above in Dos. know I need to start up and press a couple of keys, but which ones? I forgot....

A simple search around here, identified this thread https://discussions.apple.com/message/15762361#15762361
The More Like This box on the right has more.

Don't know how to sync music on mac with iphone and ipod

don't know how to sync music on mac with iphone and ipod
need to also know how to recover original library of ipod as it seems as though
it has now sync'ed with iphone & lost all my music

Start HERE

How do you deal Iphone 5 with LTE and at&t

how do you deal Iphone 5 with LTE and at&t

I can make no sense of your message.

How to make a complex path with circles and pathfinder

So I keep seeing this method of design on sites like dribbble or behance but I don't know how to do it!
Here's an example:
Basically a bunch of circles are used to create this awesome shape and design. I have a general idea on how to use the pathfinder tool and I have used it a lot in the past, but how do you snap circles together with smart guides? It seems that the smart guides only snap based on 90 or 45 angles and don't snap edges of objects together unless there are two anchors.
Here's an example:
I want to use the curves from 2 circle shapes to make a complex path. But I can't get the two paths to snap together
Ultimately to create something like the raindrop image above. I want to use the perfect curves on circles to create more complex shapes but since the paths do not snap together, I'm just eyeballing it to be close enough to do something with the pathfinder tool. I have tried many ways to solve this but I cannot figure anything out.
Kyle

Kyle,
Presuming you wish to move one circle to snap to another circle at a certain predetermined angle, and you have it placed at a distance at that angle you may (Smart Guides are your friends):
1) Select both circles, and with the Line Segment Tool drag a line from centre to centre (Smart Guides say center when you are at the first one and close enough to the second one);
2) Select the circle to move with the normal Selection Tool, then hover over the spot where the line crosses it (Smart Guides say intersect), then ClickDrag along the line (Smart Guides say path) until you have dragged it to snap to the other circle (Smart Guides say intersect).
This works whether the circles are beside each other or one is inside the other.
When moving vertically or horizontally, there is no need for the line, and you can just ClickDrag by the relevant Anchor Point.

I have just purchased a Macbook pro, but my iphone is currently synched to my old pc. How can I now synch it with my new mac without losing all the apps/music etc on my phone, Ta

Hi, I have just purchased a Macbook, but my iphone is currently synched to my old pc. How can I now synch it with my new mac without losing all the apps/music etc on my phone? Ta

The easiest way is to copy the iTunes folder from your old PC to your MB (put it in the Music folder as a subfolder), along with the other valuable data on the old PC. Or restore it from a backup of your old PC. Then authorize iTunes on the MB to the same account you had on the PC. When you sync it will warn you that your content will be deleted, but it will be replaced with the same content from the MB. Before syncing you should also make sure there is at least one entry in iCal and Address book on the MB (assuming you sync to Outlook or equivalent on the PC) to assure that your contacts and calendar entries will move over correctly.
Al alternative that is less effective is to connect the iPhone to the MB without syncing, and choose "Transfer Purchases" from the iTunes File menu. This willl copy purchases music, videos and apps, but not ripped tracks from the iPhone to the MB.

How to display warning message box with yes and no buttons

Hi,
I am writing the code to delete emp details from database.
I want to display warning message with yes and no buttons after clicking the delete button in the same page, if yes is clicked, i want to invoke delete() method in AM.
Is it possible, if yes pls suggest me how to do it.
Thanks
Message was edited by:
user536125

This is being discussed in
warning message(dialog page) to be displayed in the same page
Thanks
Tapash

I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iPhone without iTunes an now i don't wad then it turned itf off and now its stuck on the black screen with the loading sign. So please how can i turn my phone on again

I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iphone without iTunes and then it turned it self off and now its stuck on the black screen with the loading sign. So please how can i turn my iPhone on again?

I figured it out by pressing the home button and the off button but when i turn my phone on again it's not restored. And when i try to restore it with iTunes it has to update but i can't update my phone because it's jailbreaked but if i can't update it, it won't restore the phone.

Is there anyway I can get buy a Moto X customized phone? I spent most of the day talking with Motorola and Verizon.. it seems the two companies need to have a chat on how to freakn work together to order this phone online. I feel like a bunch of demento

Is there anyway I can get buy a Moto X customized phone? I spent most of the day talking with Motorola and Verizon.. it seems the two companies need to have a chat on how to freakn work together to order this phone online. I feel like a bunch of dementors sucked the life outta me, I need chocolate and alcohol to help me feel better... eeeek!

One thing that I finally had to do when I got my phone on MotoMaker was to buy it outright, after getting an account with Motorola--that way I could get a customized one with 32GB storage. I recall that I could not get it in that size with the usual contract term with Verizon. The Edge option for some reason was not available to me either, don't recall why.
But by buying it through Motorola credit, I could spread the purchase price over 12 months--kind of Edge lite. Then when my contract status changed over to month-to-month instead of the old-fashioned 2 year system, my line charges went down to $15 per month, as it would using the Edge option.

I have a comment. I am very upset with Photoshop and all your tutorials regarding the quick select tool. I have watched many tutorials and read instructions until I am blue in the face. This tool does not work. It is all over the place and all of your

I have a comment. I am very upset with Photoshop and all your tutorials regarding the quick select tool. I have watched many tutorials and read instructions until I am blue in the face. This tool does not work. It is all over the place and all of your tutorials make it look so simple. How can you advertise this as a viable tool when it just doesn't work?

It is all over the place and all of your tutorials make it look so simple.
This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
How can you advertise this as a viable tool when it just doesn't work?
Concluding something does not work because you fail at using it is not necessarily always justified.
The Quick Selection Tool certainly has limitations, but your post seems to be more about venting than trouble-shooting – otherwise you might have posted an image where you failed to get an expected result.

Help!(confused face) I'm new with flash and don't know why the timers don't work like i would expect

I'm new with flash and don't know why the timers don't work like i would expect. In VB.NET timers are how you move stuff, but it doesn't look like they are ideal for moving stuff in flash at all (really slow). I'm making a game in which you throw a ball around the screen. i am using a timer to get the ball to move. this doesn't work well for 2 reasons; 1: the ball jumps alot, and 2: the timer should eventually run out of time. If anyone can help, i'd be thrilled cus this is my first post here, so yeah

Timing for movement would be more often dealt with using something that operates at the frame rate of the file. The ENTER_FRAME event is usually selected for this purpose.
stage.addEventListener(Event.ENTER_FRAME, moveBall);
function moveBall(evt:Event):void {
// your positioning code
You could use a Timer to control when to stop the listener from being active.

How to post an interest accrual with WHT and consider its effect in the next interest posting?

Similar Messages

Maybe you are looking for