How to post images from camera to facebook???

Hi.
I've got Nokia E52. IMHO once you pay over 250EUR for the product, it has to be AT LEAST user friendly. However, some free services are more user friendlier than Nokia.
Could someone tell me.. how can I:
- Choose image from list
- Click share
- And simply post it to my facebook wall.
I know it can be done via sending image via e-mail to specific address. But it's reall ugly workaround. To use it I'd have to setup mail inbox on phone. Then I' d have to store all my messages on memory card, since I have too many emails. But then whole messaging application works very f..in slow!
So please, anyone, is there humane way to share images to facebook from Nokia E52?
BR
BR

Pl. check whether this works on your phone too..!!!
http://www.wikihow.com/Upload-Images-to-Facebook-with-a-Nokia-N-Series-Phone
http://www.wonderhowto.com/how-to-upload-pictures-facebook-nokia-c6-01-smartphone-420451/
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Similar Messages

How I post video from iPad to Facebook????

How I post video from you tube on iPad or iPhone to Facebook? Please

i have tried this. 100% uploaded. got message successful. o of video uploaded ..and video is not uploaded. video size is 80mb. what else do i need to do?

How to erase images from camera

Recently switched from iphoto to Aperture for family photographs after using it for project work.
I connected the camera (a Canon S95), imported images, but was not given the option to erase images from the camera.
Where in Aperture can you set a preference that asks whether you want to delete images from the camera?

It is the answer you should want! There are verified reports of space being lost on cards that were erased from within Aperture (as can still be done when using a card reader). Hard to tell what could go wrong if it were allowed to do so in a camera. The correct answer is to always reformat in the camera.
You actually can have problems simply erasing a few images in the camera -- I never erase, but simply wait to reformat.
Ernie

Any ideas of how to receive images from a wireless camera (2.4 ghz) to my ipad rather than the handheld DVR supplied?

Any ideas of how to receive images from a wireless camera (2.4 ghz) to my ipad rather than the handheld DVR supplied?

some of those often have webserver so one just navigate to it using a browser

How do i delete images from camera after importing

how do i delete images from camera, ipad, iphone after importing the files into aperture3?

Image capture will allow you to delete from the device after import, but I believe it is by design that Aperture does not do this as it is recommended (in the case of a camera) to use a device's own delete function rather than a 3rd party like Aperture. This also allows time for a proper backup before everything is erased from the device?

How do you Automatically Copy Images From Camera?

I would like to create an AppleScript that will run when I plug in my digital camera. Here is what I cannot figure out.
How to make it run when the camera is plugged in.
How tow to copy images from camera to a designated folder.
Thanks!

You can do all you requested - without 'AppleScript'.
01. Connect your camera launch 'Image Capture' ('/Applications/' folder - if it does not automatically launch.
02. Select the 'Image Capture, Preferences...' menu item.
03. Click on the 'General' tab.
04. From the 'Camera:' 'When a camera is connected, open:' pop up menu - select the 'Image Capture.app' menu item.
05. From the 'Devices' menu select your camera from the menu items list. A window will appear with the title of your camera.
06. From the 'Download To:' pop up menu select where to save the camera's photographs. You can select any folder anywhere on your hard disk drive(s).
07. Click the 'Options...' button, and from the drop down sheet click on the 'Connection Options' 'Automatically download all items' check box - to add a check mark. There are other options you may have be interested in.
08. Click on the 'OK' button.
09. If you want to download the photographs now - click on the window's 'Download All' button. Or, to test the above setting changes - quit 'Image Capture' and disconnect your camera. Then reconnect the camera - and watch the above setting changes take effect.
Note:
The above automatic action can also happen if the storage device of the camera were inserted into a USB digital camera card reader. So long as apply the Steps above, and you select the USB digital camera card reader from the 'Devices' menu's menu item list in Step 05 above.
'Image Capture' is not scriptable; but, may be control-able via 'tell application "System Events" to tell process "Image Capture" ....
When a camera is connect to the Mac, the storage card of the camera is mounted onto the 'Desktop' and also listed, as an alias, in the (invisible) '/Volumes/' folder.
Now that you know the name of the storage card ... you can create a 'Folder Action Script' (an example is presented below) and save it into the '/Library/Script/Folder Action Scripts/' folder,
Open the '/Volumes./' folder (in 'Finder' via 'Go, Go to Folder' - enter '/Volumes/').
Perform a right button click ('<control> - click, for single button users) on the 'Volumes' folder's window, and select 'Enable Folder Actions' (if not already).
Rpeat the right button click (<control> click) and select 'Attach a Folder Action...' - selecting your script ('Volumes_FAS.scpt' as shown below).
Below is a 'Folder Action Script' example - where you will have to substitute 'NO NAME' with the name of your digital camera's storage card's name.
-- --- Save code as a script with the name 'Volumes_FAS.scpt' --- --
on adding folder items to this_folder after receiving added_items
set myStorageCard to "NO NAME" -- The name of my 1 GB stroage card. The name of your card may differ.
repeat with i in added_items
tell application "Finder" to set tName to (name of i) as string -- Obtain name of mounted storage card.
if (tName is equal to myStorageCard) then my handle_card(i) -- If my storage card, continue processing.
end repeat
end adding folder items to
on handlecard(localVolume)
set folder_Path to ((path to desktop folder from user domain) as string) -- Path to 'Desktop' folder.
set download_Folder to "NO_NAME Photographs" -- Name of folder to store storage card's items (files and folders).
-- create download_Folder, if it does not exists.
tell application "Finder" to if (not (exists folder (folder_Path & download_Folder))) then make new folder at (folder_Path as alias) with properties {name:download_Folder}
-- Duplicate all the items (files and folders) of the storage device to the '~/Desktop/NO_NAME Photographs' folder.
tell application "Finder" to duplicate items of local_Volume to (folder_Path & download_Folder) as alias
end handle_card
-- --- End of code --- --
Review 'Finder's dictionary (in 'Script Editor') for the various ways to incorporate 'duplicate ...'.
Mac OS X (10.4.4)

How to copy images from iPhone folders other than camera roll?

How to copy images from iphone folders other than camera roll?
Images in these folders are synced to iPhone from different laptop and I need to download them in my laptop. I am able to download and access only those pics which are present in Camera Roll folder.Remaining pics are in different folder and also appearing in Photo Library from all folders.
Same problem is with iPod touch as well.

- Via a computer program like PhoneView or Touch Copy
- By using an app like Photo Transfer

I accidentally blocked images from a website (facebook) how do i fix it?

i accidentally blocked images from a website (facebook) how do i fix it?

With Facebook on display, click on the [[site identity button]] and then on More Information. This will open up the page info dialog.
First select the Permissions panel, make sure that "Load Images" is set to allow (selecting Use Default should also work)
Next select the Media panel, then click on the first item in the list. Use the down arrow key to scroll through the list. If any item has the option "Block images from (domain name)" selected, de-select the option.
This should hopefully resolve your issue, but also see [[Images or animations do not show]].

How do you post photos from IPhoto to Facebook as individual stories? NOT AS AN ALBUM?

How do you post photos from IPhoto to Facebook as individual stories? NOT AS AN ALBUM?

That is FaceBook software and the way it works.
https://www.facebook.com/help/
You can wait a day before you post a second photo,
or create your own album which only includes 1 photo/ album

How receive image from camera with PCI-bus

Hello all
Please help
me.
I have LV 7.1.1.
I wont
watch two and more images from cameras at the same time.
I have capture
card (PCI-bus) with 4 video-input.
What kind
of data must be transfered from this capture card to LV?
With respect
Aleksandr.

Hello Aleksandr
please provide more information, what type of video card do you have?
Have you configure the card so you can watch an image with MAX?
I suppose the card has the ability to capture more than one image at a time is that true?, however most of the cards that I know of, have several inputs but you can only display one image at a time, you can swith between them and capture and image from another input, to capture more than one unit at a time you would need to open/close sessions with the instrument/card such that you are switching from one input to another
vicente

Grabing images from camera & Apply OCR To that image

Hi,
I m developing a sample application on OCR. At last visit i m posting the same question.But no one can answer me.
Here i Create a Vi for grabbing images from camera. The Images are grab & save to the desired folder.But the OCR is not working on that snap image.
I m modified some Sample NI VI's for capturing the images & for OCR.
I m new for labview. I cant understand where is the problem in the VI.
i also create a character set file for reading the characters using OCR Train
so please help me to find the solution.
Attachments:
Character reading.vi ‏91 KB

HI.
Let me give some suggestions regarding your code, (See pictures), and attached an example that you could serve.
Regards.
Jonathan Cruz
CHALLENGER
K U D O S __ B I E N V E N I D O S
Attachments:
Camara OCR.vi ‏42 KB
11.JPG ‏77 KB
22.JPG ‏17 KB

Camera software not opening to transfer images from camera to computer. What to do?

My PowerShot 720is software ZoomBrowser EX not opening on computer. No images load and I don't have option to click on "connect to camera" so I can transfer images from camera to computer. Message says "Zb Module has stopped working. Windows is looking for a solution to this problem." Anyone have this happen and know what to do?
Thank you!

Hi BLG,
If you haven't already done so, please update your software for Windows 7. Here's how.
Just click here to access the software updates for your camera. Once there, just enter your operating system, then the version of the operating system. Now click on "Software" to show the software updates.
Click on "ZoomBrowser EX 6.9.0a Updater". Installation instructions are on the next page. Also, please download "CameraWindow "DC 8.8 for Windows" to your desktop.
After accepting the required disclaimer, please download the program update to your desktop.
After downloading all the software you choose to install, please install ZoomBrowser last. This will allow it to link to the other Canon software on your computer.
Since you've installed an older version of software, you may now double-click on the program update to install it. If not, just put the CD-ROM in your computer's optical drive and stop any installation program that starts.
If you've already updated the software for Windows 7, please contact us for assistance. Click here for contact options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to move images from Picasa to Lightroom 5 on a mac?

How to import images from Picasa to Lightroom 5 on a mac?

Hi, lnmyers,
I have thousands of pictures stored in Picasa, all of which are stored in my Picasa Web Albums. They are no longer in a directory on my hard-drive, that particular hard-drive having died ages ago. Thank goodness I uploaded them to Picasa's cloud before the hard-drive died. Should that ever darken, I am in trouble. I digress. I downloaded the pictures I wanted from Picasa Web Albums to my new external hard-drive that I set up and attached to my mac. For example: I had a an album called "California 2013" stored in the Picasa cloud. I downloaded the entire album to a folder on my Seagate external drive that I call Lightroom within which I have a folder called California 2013. It took about twenty minutes to get them all (300+ photos). Then, I pointed LR to the California 2013 folder on the Seagate external drive when I wanted to catalogue the pictures into LR. I did not worry about metadata; I took whatever came with the pictures and didn't worry about it. I added copyright, keywords, and ownership info with LR.
I hope that helps.

Capturing images from camera and uploading to sharepoint library automatically.

Hello Everyone,
My requirement is to capturing images from camera and uploading to sharepoint library automatically. No manual uploading will take place.
Please suggest me.
Thanks,
Rajesh

Hi,
From your description, my understanding is that you want to capturing images from camera and uploading to sharepoint library automatically automatically upload images to SharePoint library.
You will save images in your local computer after capturing visitors’ image. You could develop a custom timer job to periodically get pictures from the local folder in your computer. Please refer to this article:
Create and Deploy Custom Timer Job Definition in SharePoint Programatically
http://www.codeproject.com/Tips/634208/Create-and-Deploy-Custom-Timer-Job-Definition-in-S
you could upload pictures to your SharePoint from the folder with C# code, please refer to this article:
How to: Upload a File to a SharePoint Site from a Local Folder
https://msdn.microsoft.com/en-us/library/office/ms454491%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to copy images from another MC in reversed order??

Hi everyone,
I'm new to AS3 and have been fighting and searching for a solution to this problem for a week now, and I'm VERY close!
I crated a MC holding of a series of images (about 50) and I jump around in it using plenty AS3 scripts (most of which I don't fully understand yet, but I'm working on that to! )
I had to find a way to "rewind" (= play backwards) the MC. Since there is a stop(); command in almost every frame, prevFrame does not work and if I put that in a loop, it goes WAY to fast (but worked).. So I could think of only one way...
Create a new (reverserd) MC with the same image sequence ald reverse it manually and play that one.
This all works fine (very proud of it ).
Now my question:
To get this to work for multiple image sequences, I have to load all images twice (once in MC_1 and again in MC_2 and select them and reverse them).
Not a big one, unless you want to create MANY of those SWF's...
Is it possible to load the 50 images of the first MC in reverse into the second MC dynamically? JUST the images, noting else.
extra info: the MC_2 is already in the lib(empty) and placed on the stage.
something like:
var pointer:Number=1;
for (var:i:Number=50;i>=0;i--) {
get MC_1.picure(var);
put it in MC_2.frame(pointer);
pointer = pointer + 1;
All help is welcome and please take into account that I have little experience and copy most of my scripting from people like you
T.I.A.
Melluw

I tried your advice (thanks for that)
The event I already have is the mouse leave
I //-d out the part I removed (what did work)
The code I ended up with is:
function Start() {
stage.addEventListener(Event.MOUSE_LEAVE, cursorHide);
function cursorHide(evt:Event):void {
var currFrame = MC_1.currentFrame;
if (CCW == true) { //it is true in this case
movStart = (50 - currFrame);
else {
movStart = currFrame;
if (movStart>25) {
MC_1.prevFrame();
// removed swapChildren(MC_1, MC_2); // This is the part I removed
// removed MC_2.gotoAndPlay(movStart);
else {
MC_1.gotoAndPlay (movStart);
And if I leave the stage on the part where movStart is indeed >25
Nothing happens,
So I guess this is not what you meant
Subject: Action Script 3 how to copy images from another MC in reversed order??
I cannot direct you in the loading of the images approach, it will be too complicated, and will probably not work anyways... when you move away from a frame that has dynamic content, you lose the content. So basically, there is nothing practical in taking that approach.
I do niot understand what the problem will be with the enterFrame/prevFrame approach. If everything you can do with the mouse is already used (which I doubt) by the first mc, then there is nothing else you can do with this file. You probably just need to rethink your control scheme. You should search Google for "AS3 slideshow tutorial", and to lighten up your design, add "XML" in that search.
>

How to post images from camera to facebook???

Similar Messages

Maybe you are looking for