How to post recurring postings in the GL period for the execution date?

I have a customer who uses the alert to show recurring postings. If they select to post the entry, the system date is used for the posting period. Is there any way to have the system use the 'execution date' period? The problem is that they might not see the posting until Oct (system date) when it should have been executed in Sept. So, the recurring posting is posted into Oct instead of Sept. Any information you have on this will be greatly appreciated. Thanks.

Gordon,
The alert is running. However, when the users selects a recurring posting to update, it uses the 'system' date and not the date of execution on the recurring trx. So, if for example, the user was on vacation for the last week in Sept and he gets back on Oct 1. There is a recurring posting with an execution date of 9/30/09 in the system. The user gets the alert on Oct 1 when he returns to the office and then selects it for posting. The posting date on the recurring posting would be OCT 1...they really want it to be 9/30/09. Basically, is there a way or work around to select the 'posting' date of the recurring posting or will it always use the 'system' date?

Similar Messages

How to move statistical postings to the regular section of Cost Ctr

Hi All,
Can any one, please, tell how can I move postings from the statistical section to the regular section of a Cost Ctr? I am talking about cost ctr report S_ALR_87013620 where we have two sections, one for the regular and other for the statistical section. We have some postings gone to the Statistical section incorrectly. Now we want to move them to the Regular section.

Hi,
As Suraj has rightly said, the real posting would have gone to some internal order and hence a statistical posting to the cost center.
As far as I understand, you can not transfer a posting from statistical to real section within a cost center.
Please note that postings, statistical or real, will be available in cost center report. But you can not distribute or assess statistically posted costs to other cost centers.
I suggest you to check the accounting documents through the document environment to identify other accounting documents and to know where the real posting has gone. Then if required, you can process your future postings with real postings to cost center.
As far as the present postings are concerned, the only way is to reverse the relevant financial accounting documents, if small in number, and post with account assignment as cost center (ensure that it will be a real posting).
Hope the above will be of use to you.
Cheers.

Can anyone tell me how to post videos taken on the iPhone that are now stored on the Air on Facebook?

Can anyone tell me how to post videos taken on the iPhone that are now stored on the Air on Facebook?

Hi
Yeah got onto that but it won't load up anything readable. It just produces a little annimation of 35mm film strip and when you click on it - nothing. All you end up doing is clicking on the X in the top right hand corner of the annimation and deleting it. Really frustrating because uploading from the iPhone is simple, but I've deleted it off that and can't get it back from the Mac to the iPone either. Seem to be trapped no matter what i do.
Thanks for your help though

How to get start date of the period for a given date from cube

I have a situation where i need to find the start day of the period for a given date. is there a way to know that. i want to use that in my report. i enter the date from my report(i have date parameter), depends on the date, i want to display the start day
of the period. how can i write expression for that in my report?
ram

Hi ramprasad74,
According to your description, you are using Analysis Services as a data source for the report, the cube has hierarchy: Fyear, FQuarter, FPeriod, fweek, Fdate. You want to add a date parameter to the report, after you changed value of the parameter, the
report will return the first day of FPeriod.
To achieve your goal, we need to add a parameter to the report, then use the parameter in mdx query. For detail information, please refer to the following steps:
In the Report Data pane, right-click on a dataset created from a SQL Server Analysis Services data source type, and then click Query. The MDX query designer opens in Design mode.
On the toolbar, click Design to toggle to Query mode.
On the MDX query designer toolbar, click Query Parameters symbol. The Query Parameters dialog box opens.
In the Parameter column, click <Enter Parameter>, and then type the name of a parameter.
In the Dimension column, choose a value from the drop-down list.
In the Hierarchy column, choose a value from the drop-down list.
In the Default column, from the drop-down list, select a single value.
Click OK.
In query designer dialog box, type the mdx query like below:
with member [Measures].[FirstChild]
as
[Date].[Fiscal].currentmember.parent.firstchild.name
select {[Measures].[FirstChild]} on 0,
[Date].[Fiscal].[Date].members on 1
from
( SELECT ( STRTOSET(@ParameterName, CONSTRAINED) ) on 0
from
[Cube]
Here are relevant threads you can reference:
https://social.msdn.microsoft.com/forums/sqlserver/en-US/c7146ac3-40ea-4d53-b321-c707aebbd405/how-to-pass-date-parameter-to-mdx-query
https://social.msdn.microsoft.com/forums/sqlserver/en-US/fd12a865-bc90-4a65-af42-ce38a8cfa29b/pass-date-time-parameter-to-mdx-query-ssrs
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

I just restored my iPhone so i could get rid of my other data but all it did was increase my other data by .5 gbs. How do i get rid of the "other data"?

I just restored my iPhone so i could get rid of my other data but all it did was increase my other data by .5 gbs. How do i get rid of the "other data"?

kmsammon wrote:
... How do i get rid of the "other data"?
You will Not be able to get rid of it entirely...
Other is usually around 1 GB...
A ' Large Other ' usually indicates Corrupt Data...
First Try a Restore from Backup...
But... if the Large Other Persists, that is an Indicator of Corrupt Data in the Backup...
Then a Restore as New is the way to go...
Details Here > http://support.apple.com/kb/HT1414
More Info Here...
maclife.com/how_remove_other_data_your_iphone

How to Add 15 Days to the current Date in eCATT

Hello eCATT Guru's,
How to add 15 days to the current date in eCATT.
I have changed the Date format to mm/dd/yyyy.
now i want to add 15 days to the sy-datum.
How to do that.do any one know?
Thanks in Advance,
Raj

Check out this link -
http://help.sap.com/saphelp_46c/helpdata/en/d7/e21a50408e11d1896b0000e8322d00/frameset.htm
It gives details about DATE variables in CATT. Hope this will help you out.
ashish
Reward points if you find this helpful.
Message was edited by: Ashish Gundawar

How to add a button to the grouped data in an AdvancedDataGrid?

Hi,
Can anyone please suggest how to add a button to the grouped data in the AdvancedDataGrid?
I have tried extending the AdvancedDataGridGroupItemRenderer and using it as the groupItemRenderer but its not reflecting.
For the leaf node the itemRenderer property works just fine.
Please help!

HI ,
I want to add a push button on the ALV list out put which is comming as a pop up and I want this using classes and methods.
I have got a method IF_SREL_BROWSER_COMMANDS~ADD_BUTTONS from class cl_gos_attachment_list but still I am unable to get any additional button on the output ALV popup.
Please help.
Regards,
Kavya.

How to start a thread after the execution/termination of another thread.???

Hello,
How to start a thread after the execution/termination of another thread....???
For example:
consider two threads: ThreadA and ThreadB
I could start the ThreadB after the execution of ThreadA.
How to identify the termination of one thread.....???
Please help me...
Thanks & Regards,
Kayalvizhi

What do you mean with "it doesn't work"? Do you get a compiler error? Do you get an exception at runtime? What's the error message?
Jesper

How can I reference records outside the two date parameters?

Hi all,
I have a query that fetches records based on the two date parameters defined (Startdate and Enddate).
If the Startdate is 2014-12-01 and the Enddate is 2014-12-12, I want to pull records outside these two date parameters, that is 2014-09-01 and 2014-11-30.
I want to add up the records from 2014-09-01 and 2014-11-30 and include them in one of the columns in my report.
I tried using this query:
SUM(CASE WHEN FilteredIncident.Statuscodename IN ('QUEUED', 'ASSIGNED') AND (EnteredOn >= '2014-09-01' AND EnteredOn<= @StartDate) THEN 1 ELSE 0 END) AS OpenRecords
Please help with any ideas..thanks

Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you probably need to read and download the PDF for:
https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
There is no such crap as a “status_code_name” in RDBMS. It has to be a “<something in particular>_status”; think about how silly that data element name is! Want to keep going and have a “status_code_name_value_id”? LOL!
The name “Filtered_Incident” is also wrong. Tables are sets, so unless you have only one element in this set, the table name should be a plural or (better) collective name. But a better question is why did you split out “Filtered_Incidents” from “Incidents”?
Would you also split “Male_Personnel” and “Male_Personnel” from “Personnel”?
Get a book on data modeling and learn some basics.
>> I have a query that fetches records [sic: rows are nor records] based on the two date parameters defined (report_start_date and report_end_date). If the report_start_date is 2014-12-01 and the report_end_date is 2014-12-12, I want to pull records [sic]
outside these two date parameters, that is 2014-09-01 and 2014-11-30. I want to add up the records [sic] from 2014-09-01 and 2014-11-30 and include them in one of the columns in my report. <<
Having no DDL and no sample data makes this hard. Does your boss make you program without any documentation, DDL, etc? This spec is vague; you say to do a total, but show a count, etc.
One of the many nice things about DATE data types is that the BETWEEN predicate works with them, so you can quite writing 1960's BASIC predicates with primitive logic operators.
Here is a guess:
SELECT SUM(CASE WHEN incident_date BETWEEN '2014-09-01'
AND @report_start_date THEN 1 ELSE 0 END)
AS open_record_cnt
FROM Incidents
WHERE incident_status IN ('QUEUED', 'ASSIGNED')
AND incident_date <= @report_end_date;
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

How to display text value in the header data (Header text) of credit memo

Hi...
I need to display the text value of the text field in the header text of the header data in credit memo.
The text values are stored in a ztable and i need to display it based on the billing document stored in vbrk (zfield) that was inserted during the creation of credit request..
Appreciate your help on how to do this...
Thansk and will surely reward the points..
Kanthi..

Hi kanthi ,
Read the value from Z Table and during the creation of cedit memo check out for some exit where u the value from The zTABLE AND use function module SAVE_TEXT with object and id in the header text .
Please award if useful.

How to use XmlModify to sort the XML Data?

Hello,
I saw some examples explain how to use XmlModify in BDB XML package. I want to sort the XML data by several elements but my Java program could not work correctly.
<CustomerData>
<Transaction>
<DLSFIELDS>
<ADR_PST_CD>12345</ADR_PST_CD>
<CLT_IRD_NBR>002</CLT_IRD_NBR>
</DLSFIELDS>
</Transaction>
<Transaction>
<DLSFIELDS>
<ADR_PST_CD>12345</ADR_PST_CD>
<CLT_IRD_NBR>102</CLT_IRD_NBR>
</DLSFIELDS>
</Transaction>
// many nodes like transaction ...
</CustomerData>
My XQuery script was executed successfully in the shell. The script looks as follows:
"for $i in collection('sample.dbxml')/CustomerData/Transaction order by xs:decimal($i//ADR_PST_CD), xs:decimal($i//CLT_IRD_NBR) return $i".
The Java code :
// create XmlManager
XmlManager manager = // ...;
// open XmlContainer
XmlContainer container = // ...;
XmlQueryContext context = manager.createQueryContext(XmlQueryContext.LiveValues, XmlQueryContext.Eager);
XmlQueryExpression expression = manager.prepare("for $i in collection('sample.dbxml')/CustomerData/Transaction order by xs:decimal($i//ADR_PST_CD),xs:decimal($i//CLT_IRD_NBR) return $i", context);
XmlModify modify = manager.createModify();
XmlUpdateContext uc = manager.createUpdateContext();
XmlDocument xmldoc = container.getDocument("sample.xml");
XmlValue value = new XmlValue(xmldoc);
long numMod = modify.execute(value, context, uc);
System.out.println("Peformed " + numMod     + " modification operations");
Could you point out the errors above or offer some suggestion?
Thanks.

I have other question of the sorting issue. Here are a large XML need to sort so I have to split it to multiple small XML files. After importing these files, I will use the XmlModify and XQuery to sort them. I'm not clear on the multiple XML files processing.
1. Can the BDB XML ensure that all these XML files were sorted or how to update all documents with same logic.
2. If I want export all these sorted documents, how can I ensure these files processed in sequence? Which document needs process first?
The export method:
public void export(String outputfile)throws Exception{
final int BLOCK_SIZE = 5 * 1024 * 1024; // 5Mb
try{
File theFile = new File(outputfile);
FileOutputStream fos = new FileOutputStream(theFile);
byte[] buff= new byte[BLOCK_SIZE];
XmlResults rs = container.getAllDocuments(new XmlDocumentConfig());
while(rs.hasNext()){
     XmlDocument xmlDoc = rs.next().asDocument();
     XmlInputStream inputStream = xmlDoc.getContentAsXmlInputStream();
     long read=0;
     while(true){
     read = inputStream.readBytes(buff, BLOCK_SIZE);
fos.write(buff,0,(int)read);
     if(read < BLOCK_SIZE) break;
inputStream.delete();
xmlDoc.delete();
rs.delete();
//MUST CLOSE!
fos.close();
catch(Exception e){
System.err.println("Error exporting file from container " + container);
System.err.println(" Message: " + e.getMessage());
Thanks.

How to add 15 days to the current date

Hi everyone,
I have the following doubt.
I stored the current system date in to a variable.Now I want to store the date which is 15 days after the current date in to a new variable.
ie current date:1-aug-09
later date:1-aug-09 + 15 days ie 16-aug-09.
Plz help me in solving this problem.
Thanks & Regards,
srinivas

jaligamasrinivas wrote:
I used String variable to store the current Date.
Now in new string variable i want to store the date after 15 days from current dateSee reply #2. String is not the right type, to be doing date arithmetic, just like it wouldn't be the right type to do numeric arithmetic. You wouldn't store integer values as strings and ask how to add them up, would you?

How to get sqlplus to print the current date/time

From a unix command line I can type:
prompt> date; <any_Cmd>; date
This will result in a timestamp being output before and after the command you inserted. Is there a way to make sqlplus print the current date/time after it is done executing an sql statment. This would be useful for me to know how long it took to execute and sql statement without watching it.
Something like:
SQL> select * from table; date;

u cld set the following statements in sql*plus :
sql>set time on
sql>set timing on
hope this solves ur problem.

How to load this value into the master data display attribute

Hi ,
Please share me the knowldege how to load this kind of data into master data display attribtes ..
Raj + Ravi Ltd (PCG: 13592)
While loading this data ,i got the error message stating that '+' should not be part of the attributes and () should not be part of the attribute ..but i need all the information as it is available in the example data .
Do i need to maintain RSKC Settings else some other things required ..
Please guide me ..
Regards,
Raj

HI,
Maintain these symbols in RSKC and try to reload the data....

Using DW CS6; when uploading a site DW changes all dates to today; how can I upload without changing the file-dates?

Using DW CS6; when uploading a site DW changes all dates to today;
how can I upload the site whilst preserving existing file-dates?
Thanks
Paul

How are you uploading?
I do not see this behavior in DWCS4 or DWCC (I assume nothing changed in DWCS6 and then back for DWCC, but I could be wrong).
However, when I upload, I only select the files I have modified after an initial "Upload Entire Site? Yes/No" prompt. If you aren't selecting specific files to upload, and you're overwriting the files on your server with new copies of your entire local site each time, the mod dates would show as the date/time of your upload.
To select only the files that have changed since your last upload...
1. Right click on your local root folder in the Files window under Local View
2. Go to Select > Newer Local from the context menu
3. Wait until DW is done talking to the server, it could take a while, when it's done, all of the files that have a newer mod date locally than their server counterparts will be selected
4. Click the Put (up arrow) button
For me, this process never changes the dates of files that aren't part of the upload.

How to post recurring postings in the GL period for the execution date?

Similar Messages

Maybe you are looking for