How to precalculate a Query without using a fixed variable in I Broad C?

Hello,
The query should be precalculate with dynamic values of a variable which are investigated during runtime. The broadcaster forces fixed values of a variable.
Does anybody knows, how to avoid the using of a fixed variable in the Information Broadcaster?
Thank you in advance.
Best Regards

Hi,
Can you tell me where in the system have you changed this setting. I searched in SPRO but there is nothing about the language. I am also facing similar situation. And if you have worked with PDF files in the broadcaster can you tell me how to change the PDF file names when I run the broadcaster for 6 to 7 variables(I mean VAR1,VAR2,...) The main folder where these PDF files get stored I can define but dont know how to change the PDF file names which fall into this folder.
Thanks,
Kal

Similar Messages

How to design a query without using Net Weaver Query Designer

Does anyone know if any alternative way to <b>design an query without using Net weaver GUI</b>? in order to reduce the time consuming, I am wondering if there have any method which can define/modify a stack of cells, characteristics and structures without work through the GUI.
Deeply thank for any of your advices.

Can you give an example?
Just from what you write, I would assume that you talk about something like a mass-property-changer. As far as I know the BEx this is not really possible, but what I do normally is building one query and then either using query-views (saving more or less the navigation state) or by copying and changing the properties of the few characteristics and key figures.
But without a specific example it's difficult to exactly understand what you exactly need.
Mario

How can i fetch records from 3 tables in a single query without using join

Hi.
Can any body please tell me <b>How can i fetch records from 3 tables with a single query without using joins</b>
Thanx
prabhudutta

Hi Prabgudutta,
We can fetch the data by using the views concept.
Go throuth this info we can know the how to create view and same like database table only we can fetch the data.
Views conatin the data at runtime only.
Four different view types are supported. These differ in the
way in which the view is implemented and in the methods
permitted for accessing the view data.
Database views are implemented with an equivalent view on
the database.
Projection views are used to hide fields of a table (only
projection).
Help views can be used as selection method in search helps.
Maintenance views permit you to maintain the data
distributed
on several tables for one application object at one time.
step by step creation of Maintenance view:
With the help of the table maintenance generator, you are able to maintain the ENTRIES of the table in SM30 transaction.
It can be set in transaction SE11 - Tools - Table maintenance generator.
Table maintanance Generator is used to manually input values using transaction sm30
follow below steps
1) go to se11 check table maintanance check box under attributes tab
2) utilities-table maintanance Generator-> create function group and assign it under
function group input box. Also assign authorization group default &NC& .
3) select standard recording routine radio in table table mainitainence generator to move table
contents to quality and production by assigning it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers this dialog box appears when you click on create button
6) save and activate table
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
SM30 is used for table maintenance(addition or deletion of records),
For all the tables in SE11 for which Table maintenance is selected , they can be maintained in SM30
Sm30 is used to maintain the table ,i.e to delete ,insert or modify the field values and all..
It creates the maintenance screen for u for the aprticular table as the maintenance is not allowed for the table..
In the SE11 delivery and maintenance tab, keep the maintenance allowed..
Then come to the SM30 and then enter the table name and press maintain..,
Give the authorization group if necessary and give the function group and then select maintenance type as one step and give the screen numbers as system specified..
Then create,,,
Then u will able to see the maintenance view for the table in which u can able to insert and delete the table values...
We use SM30 transaction for entering values into any DB table.
First we create a table in SE11 and create the table maintenance generator for that Table using (utilities-> table maintenance generator) and create it.
Then it will create a View.
After that from SM30, enter the table name and Maintain, create new entries, change the existing entries for that table.
Hope this resolves your query.
Reward all the helpful answers.
Rgds,
P.Naganjana Reddy

How to write a SQL Query without using group by clause

Hi,
Can anyone help me to find out if there is a approach to build a SQL Query without using group by clause.
Please site an example if is it so,
Regards

I hope this example could illuminate danepc on is problem.
CREATE or replace TYPE MY_ARRAY AS TABLE OF INTEGER
CREATE OR REPLACE FUNCTION GET_ARR return my_array
as
     arr my_array;
begin
     arr := my_array();
     for i in 1..10 loop
          arr.extend;
          arr(i) := i mod 7;
     end loop;
     return arr;
end;
select column_value
from table(get_arr)
order by column_value;
select column_value,count(*) occurences
from table(get_arr)
group by column_value
order by column_value;And the output should be something like this:
SQL> CREATE or replace TYPE MY_ARRAY AS TABLE OF INTEGER
2 /
Tipo creato.
SQL>
SQL> CREATE OR REPLACE FUNCTION GET_ARR return my_array
2 as
3   arr my_array;
4 begin
5   arr := my_array();
6   for i in 1..10 loop
7    arr.extend;
8    arr(i) := i mod 7;
9   end loop;
10   return arr;
11 end;
12 /
Funzione creata.
SQL>
SQL>
SQL> select column_value
2 from table(get_arr)
3 order by column_value;
COLUMN_VALUE
           0
           1
           1
           2
           2
           3
           3
           4
           5
           6
Selezionate 10 righe.
SQL>
SQL> select column_value,count(*) occurences
2 from table(get_arr)
3 group by column_value
4 order by column_value;
COLUMN_VALUE OCCURENCES
           0          1
           1          2
           2          2
           3          2
           4          1
           5          1
           6          1
Selezionate 7 righe.
SQL> Bye Alessandro

Tuning query without using hint

Hi,
i want to change the plan of a query without using hint.
Also i want to use the plan that hint generate in my original query.
My db is a 11g.
How can i do this?
tnx

You can use SQL Plan Manager. You might find this interesting:
http://blogs.oracle.com/optimizer/entry/what_should_i_do_with_old_hints_in_my_workload
The link above basically suggests these steps:
1. Run the query with the hints, then
2. Take the plan from #1 and associate its SQL plan baseline with the query with no hints
3. Remove the hints for that query in the code and start capturing and evolving plans for the un-hinted query

How do i install opensolaris without using the virtual box??

hi.
i am new to solaris
i am currently using a windows XP OS
i got down the opensolaris cd from SUN
how do i install opensolaris without using a virtual box ?

The OpenSolaris CD is a "Live CD". You can boot off of the CD, and either run the OpenSolaris operating system directly, or you can select the "Install" icon on the LiveCD desktop. You can find full instructions here: http://dlc.sun.com/osol/docs/content/IPS/getst1.html
Do you want to keep your Windows OS on the disk? If so, then you want to follow the instructions for partitioning your disk (unless you already have a spare partition).
-- Alan

Needs help to retrive the last row in a select query without using rownum

Hi ,
i need to retrive the last row from the select sub query without using rownum.
is there any other way to retrive the last row other than the below query.
is that the ROWNUM=1 will always retrive the 1 row of the select query ?
select from*
*(select ename from employee where dept_id=5 order by desc) where rownum=1;*
Please advise.
thanks for your help advance,
regards,
Senthur

957595 wrote:
Actually my problem is ithat while selecting the parents hiearchy of the child data using
CONNECT BY PRIOIR query
I need the immediate parent of my child data.
For example my connect BY query returns
AAA --- ROOT
BBB --PARENT -2
CCC --PARENT-1
DDD IS my input child to the connect by query
Immediate parent of my child data "DDD" ---> CCC(parent -1)
i want the data "CCC" from the select query,for that i am taking the last row of the query with rownum.
I got to hear that using ROWNUM to retrive the data will leads to some problem.It is a like a magic number.I am not sure what the problem will be.
So confusing with using this rownum in my query.
Please advice!!!It's not quite clear what you're wanting, but perhaps this may help?
you can select the PRIOR values to get the parent details if you want...
SQL> ed
Wrote file afiedt.buf
1 select empno, lpad(' ',(level-1)*2,' ')||ename as ename, prior empno as mgr
2 from emp
3 connect by mgr = prior empno
4* start with mgr is null
SQL> /
     EMPNO ENAME                                 MGR
      7839 KING
      7566   JONES                              7839
      7788     SCOTT                            7566
      7876       ADAMS                          7788
      7902     FORD                             7566
      7369       SMITH                          7902
      7698   BLAKE                              7839
      7499     ALLEN                            7698
      7521     WARD                             7698
      7654     MARTIN                           7698
      7844     TURNER                           7698
      7900     JAMES                            7698
      7782   CLARK                              7839
      7934     MILLER                           7782
14 rows selected.(ok, not the best of examples as the mgr is already known for a row, but it demonstrates you can select prior data)

How to find out query name using Elements of the query builder.

Hi SDNers,
how to find out query name using Elements of the query .
thanks,
satyaa

Hi,
For having a look at the relation between BEx tables,check the link below:
http://wiki.sdn.sap.com/wiki/display/BI/ExploretherelationbetweenBEx+Tables
-Vikram

How to connect to AD without using ADWS?

How to connect to AD without using ADWS? Is it possible to do it? If yes, can teach me how to connect to AD and find their attributed?

Hi Noobycy,
There are few tools to find AD attributes without ADWS. See options you have below
1.ADFIND -
http://www.joeware.net/freetools/tools/adfind/ This is a command Line tool
2.
The ADSIEDIT tool
from the Windows Support Tools is a great tool to "explore" the AD.
http://technet.microsoft.com/en-us/library/cc731547.aspx
3. ADUC -
http://www.boostsolutions.com/blog/how-to-find-attributes-of-objects-in-active-directory/
Regards, MassonTech

How to validate a Query without executing it?

How to validate a Query without executing it?
For example if I have:
ReadAllQuery myQuery = new ReadAllQuery(myClass);
myQuery.setSelectionCriteria(myExpression);
What can I do to have must validation as possible been done before executing the query?
Validation that could be done are:
- Expression reference fields that really exist in TopLink mapping
- Literal provided to expression are of compatible type
- Parameter setting set against the query are all compatible

Your could prepare the query.
query.prepareCall(session, record);
This will do all query validation and generate the SQL for the query.

Can I rewrite the following query without using Row_number() function ??!!

Hello every one, can I rewrite the following query without using the 'ROW_NUMBER() OVER ' part.
The query is supposed to pull out the records whose CODE is not NULL and has most
recent date for UPDATE_DATE . The reason I wanted to do this is, When I embed this query
in between many other queries along with JOINs, My oracle server is unable to execute. So, I thought
its better to supplant 'ROW_NUMBER() OVER ' logic with something else and try it. .
SELECT a.* FROM
(SELECT b.*, ROW_NUMBER() OVER (PARTITION BY b.PIDM
ORDER BY b.UPDATE_DATE DESC) AS Rno
FROM
SELECT *
FROM SHYNCRO WHERE CODE IS NOT NULL
)b
)a
WHERE a.Rno = 1

Hi,
You didn't write over 150 lines of code and then start testing it, did you?
Don't.
Take baby steps. Write as little as pssiblem test that. Debug and test again until you have something that does exactly what you want it to do.
When you have somehting that works perfectly, take one baby step. Add a tiny amount of code, maybe 1 or 2 lines more, and test again.
When you do get an error, or wrong results, you'll have a much better idea of where the problem is. also, you won't be building code on a flimsy foundation.
If you need help, post the last working version and the new version with the error. Explain what you're trying to do in the new version.
The error message indicates line 133. It looks like line 133 of your code is blank. Does your front end allow completely blank lines in the middle of a query? SQL*Plus doesn't by default; you have to say
SET SQLBLANKLINES ONto have a completely blank line in SQL*Plus. (However, lines containing nothing but at commnet are always allowed.)
You may have noticed that this site normally doesn't display multiple spaces in a row.
Whenever you post formatted text (such as indented code) on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.
The 4 people who posted small code fragments for you to read all did this. It would be so much easier for people to read your humongeous query if it were formatted.

I want single update query without use the function.

I want to update sells_table selling_code field with max date product_code from product table.
In product table there is multiple product_code date wise.
I have been done it with below quey with the use of function but can we do it in only one update query
without use the function.
UPDATE sells_table
SET selling_code = MAXDATEPRODUCT(ctd_vpk_product_code)
WHERE NVL(update_product_flag,0) = 0 ;
CREATE OR REPLACE FUNCTION HVL.maxdateproduct (p_product IN VARCHAR2) RETURN NUMBER
IS
max_date_product VARCHAR2 (100);
BEGIN
BEGIN
SELECT NVL (TRIM (product_code), 0)
INTO max_date_product
FROM (SELECT product_code, xref_end_dt
FROM product
WHERE TO_NUMBER (p_product) = pr.item_id
ORDER BY xref_end_dt DESC)
WHERE ROWNUM = 1; -- It will return only one row - max date product code
EXCEPTION
WHEN OTHERS
THEN
RETURN 0;
END;
RETURN max_date_product;
END maxdateproduct;
Thanks in Advance.

Hi,
Something like this.
update setlls_table st
        set selling_code =(select nvl(trim(product_code)) from
                              (select product_code
                                      , rank() over (partition by item_id order by xref_end_dt DESC) rn
                                   from product
                               ) pr
                               where rn =1
                                     and pr.item_id = st.ctd_vpk_product_code
                           ) where NVL(update_product_flag,0) = 0 ;As such not tested due to lack of input sample.
Regards
Anurag Tibrewal.

Can u write the following query without using group by clause

select sp.sid, p.pid, p.name from product p, supp_prod sp
where sp.pid= p.pid and
sp.sid = ( select sid from supp_prod group by sid
having count(*) =(select count(*) from product));
thru this, we retrieving all the products delivered by the supplier.
Can you write the following query without using the group by clause

select sp.sid, p.pid, p.name
from product p, supp_prod sp
where sp.pid= p.pid the above query will still retrieve all the products supplied by the supplier. sub-query is not necessary.
maybe if you can post some sample data and output will help us understand what you want to achieve.

How to find the query name using infoset name

Hi Experts
       Iam new to the sap queries(SQ01,SQ02), some queries already created.
      now i want to do some modification, my problem is i am not able to find the query name.
      I know the infoset name, can you tell me how to find the query name using the infoset name, is ther any table for this.
i tried in sq01 also, but its confusion, pls advice me on this.
thanks in advance.
regards
rajaram

Hi
try like this..
SQ02 --> go to --> Query Directory..
from there you can get all the queries belong to a Infoset.

Hello! I'm out of the country and all my iWeb information is on my computer at home. Now I need to make changes on the webpage... how can i do that without using the computer i made the page on? Thank you!!

Hello! I'm out of the country and all my iWeb information is on my computer at home. Now I need to make changes on the webpage... how can i do that without using the computer i made the page on? Thank you!!

iWeb uses the domain.sites2 files to store its assets.
You'll find it here :
~/Library/Application Support/iWeb/
where ~ is your Home directory.
If you take a computer with you, you have to store that file in the same location.
It's not different from taking documents with you if you want to edit them.
A solution is to remotely control your computer at home.
TeamViewer, LogMeIn, Apple Remote Desktop or any VNC application you can use, like "Chicken of the VNC".

How to precalculate a Query without using a fixed variable in I Broad C?

Similar Messages

Maybe you are looking for