How to present the data this way?

I have a table, which has three columns:
Actnbr ------ BeginDate --------EndDate--------     IntRate
123456789------     01/20/2006-----     02/1/2006------     8.00
123456789------     02/2/2006-----     02/20/2006------5.00
123456789------     02/20/2006-----     05/1/2006------     4.00
123456789------     05/1/2006-----     06/10/2006------4.00
123456789------     6/10/2006-----     <null>------     8.00
987654321------     01/10/2006-----     <null>     ------     6.00
456789123------     05/04/2006-----     05/05/2006------7.00
456789123------     05/06/2006-----     08/10/2006------6.00
456789123------     08/11/2006-----     09/20/2006------6.00
456789123------     09/21/2006-----     <null>     ------     5.00
789123456------     05/9/2006-----     08/20/2006------8.00
more ...
I want the output like this:
Actnbr---- BeginDate--- EndDate---IntRate-- BeginDate-- EndDate--IntRate-- BeginDate-- EndDate--intRate--BeginDate--EndDate---IntRate--     BeginDate--EndDate-- IntRate
123456789--01/20/2006--02/1/2006-- 8.00-- 02/2/2006-- 02/20/2006-- 5.00--05/1/2006-- 06/10/2006--4.00----05/1/2006--06/10/2006--4.00-- 6/10/2006-- <null>--8.00
987654321--01/10/2006--     <null> -- 6.00
456789123--05/04/2006-- 5/5/2006-- 7.00--05/06/2006--08/10/2006-- 6.00--08/11/2006--09/20/2006--6.00--09/21/2006-- <null>-- 5.00
789123456--05/9/2006-- 8/20/2006--8.00
is it possible to get the output like above using just sql, if so, could you please share your thoughts with an example.
i used "-" to sepearte value for clarity.
Thanks in advance.

this one solve ?
select AcctNbr || begindate || enddate || intrate || begindate || enddate || intrate from table_name;
or yout want sth like this?
SQL> select * from rup_data1;
OCCUPATI LONAMOUNT INCOME REF DECSIO
SAL 75 70 no ACCEPT
SAL 80 90 no REJECT
SAL 85 85 yes REJECT
SAL 72 95 yes REJECT
SAL 69 70 yes ACCEPT
72 90 no ACCEPT
PROFS 83 78 yes ACCEPT
PROFS 64 65 no ACCEPT
PROFS 81 75 yes ACCEPT
BUSINESS 71 80 no REJECT
BUSINESS 65 70 no REJECT
OCCUPATI LONAMOUNT INCOME REF DECSIO
BUSINESS 75 80 yes REJECT
BUSINESS 68 80 yes ACCEPT
BUSINESS 70 96 yes ACCEPT
14 rows selected.
SQL> SELECT concat_and_fn(newcol) FROM newformat ;
CONCAT_AND_FN(NEWCOL)
SAL7570noACCEPT and SAL8090noREJECT and SAL8585yesREJECT and SAL7295yesREJECT an
d SAL6970yesACCEPT and 7290noACCEPT and PROFS8378yesACCEPT and PROFS6465noACCEPT
and PROFS8175yesACCEPT and BUSINESS7180noREJECT and BUSINESS6570noREJECT and BU
SINESS7580yesREJECT and BUSINESS6880yesACCEPT and BUSINESS7096yesACCEPT
SQL>
pls align it ,
rgds
Rup

Similar Messages

  • How to bring the data from application server to presentation server

    hi,
    i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this  topic.folowing is the code .
    *& Report  ZPFA_HIER_LOAD
    REPORT  ZFPA_HIER_LOAD.
    *---- Declaration of Oracle connectioN
    DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
    DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
    DATA : mfilename type string.
    data: begin of matab1 occurs 0,
          MFL1(9) TYPE C,
          MFL2(5) TYPE C,
          MFL3(9) TYPE C,
          MFL4(2) TYPE C,
          MFL5(8) TYPE C  ,
         end of matab1 .
    data: setid(8) type c.
    data: begin of source occurs 0,
          setid(8) type c,
          end of source.
    *PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
    *PARAMETERS : m_bsenty(8). " type c obligatory.
    *mfilename = P_PFILE.
    EXEC SQL.
      SET CONNECTION :con_name
    ENDEXEC.
    EXEC SQL.
      CONNECT TO :con_name
    ENDEXEC.
    EXEC SQL PERFORMING get_source.
      SELECT set_id FROM UNIT_SET INTO
      :setid
      ORDER BY SET_ID
    ENDEXEC.
    start-of-selection.
    LOOP AT SOURCE.
      REFRESH matab1. CLEAR matab1.
      EXEC SQL PERFORMING evaluate.
    SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
    :MFL5
    where set_id = :SOURCE-SETID ORDER BY MEM_ID
      ENDEXEC.
      if SOURCE-SETID = '80000000'.
       mfilename = '/tmp/aesorg'.
      elseif SOURCE-SETID = '80000006'.
       mfilename = '/tmp/Consolidation_Manager'.
      elseif SOURCE-SETID = '80000010'.
       mfilename = '/tmp/10org'.
      elseif SOURCE-SETID = '80000012'.
       mfilename = '/tmp/20org'.
      elseif SOURCE-SETID = '80000018'.
       mfilename = '/tmp/30org'.
      elseif SOURCE-SETID = '80000025'.
       mfilename = '/tmp/40org'.
      Endif.
      mfilename = '/usr/test.dat'.
    ************************This was i tried***********************
      open dataset mfilename for output in text mode encoding default." IN
    *TEXT MODE ENCODING DEFAULT.
    if sy-subrc <> 0.
    exit.
    endif.
    close dataset mfilename.
    CALL FUNCTION 'GUI_DOWNLOAD'
       EXPORTING
         FILENAME         = MFILENAME
         FILETYPE         = 'ASC'
       TABLES
         data_tab         = matab1
       EXCEPTIONS
         file_write_error = 1
         invalid_type     = 2
         no_authority     = 3
         unknown_error    = 4
         OTHERS           = 10.
    loop at matab1 .
    transfer matab1 to mfilename.
    endloop.
      clear matab1.
    ENDLOOP.
    loop at matab1 .
    transfer matab1 to mfilename.
    endloop.
    close dataset mfilename.
         MFL5 = '0'.
       CLEAR MFL5.
    FORM evaluate.
      if MFL5 = -1.
        MFL5 = ''.
      ENDIF.
      concatenate MFL1 ','   into MFL1.
      concatenate MFL1 ','   into MFL3.
      matab1-MFL1 = MFL1.
      matab1-MFL2 = 'ZBUE,'.
      matab1-MFL3 = MFL3.
      matab1-MFL4 = ' ,'.
      matab1-MFL5 = MFL5.
      append matab1 .
      CLEAR MFL1.
      CLEAR MFL2.
      CLEAR MFL3.
      CLEAR MFL4.
      CLEAR MFL5.
    ENDFORM.
                     "evaluate
    *&      Form  GET_SOURCE
          text
    FORM GET_SOURCE.
      source-setid = setid.
      append source.
      clear source.
    ENDFORM.                    "GET_SOURCE

    Hi Rammohan,
    You cannot use OPEN DATASET to transfer data from application server to presentation server.
    You can do the following :
    <b>Do 1st point in BACKGROUND</b>
    1. Read the data file from application server into an internal table using OPEN DATASET
    <b>Do 2nd point in Foreground</b>
    2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
    You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
    Best regards,
    Prashant

  • Freaking OUT!! I have a desktop (IMac) and my IPhoto library is gone! Events gone, albums gone, faces gone!!! I can't even find the folder for IPhoto Library under Pictures under my hardrive. I have no idea how long it's been this way!

    Ok so here's what has happened. I got on the Mac to open IPhoto. It opened, but no files PERIOD! No albums, events, photos, faces. They were all empty. I had TONS of albums and photos. I have no clue how long it's been this way, probably a couple of weeks since I've been on it. Ac couple of things come to mind that might have caused or had something to do with...IPhone 4 had to be restored and a back-up and upgrade occurred. Also, I deleted files off my camera while connected. Not sure the culprit, but VERY UPSET! I have never set up Time Machine and have no other back up. I downloaded and purchased File Salvage but I have to get an external hard drive before it will do it. I put the application install CD in last night thinking that if I reinstalled it would help but then I got scared and shut Mac down half way through. I couldn't even find the file IPhoto Library. When I open IPhoto it say IPhoto 9 but when I "get more info" it says IPhoto 8.1.2 or something like that. Please HELP!!

    Try an All Images Search:
    In the Finder:
    Command - f
    Kind: Images
    Size: Greater than 300kb (This is to avoid all the thumbnails, icons and so on.)
    Set it to search the Mac.
    As to why? The most likely answer is user error, I'm afriad. It does point up the importantce of always having a back up.
    Regards
    TD

  • How to define the date format for this date string

    2006-11-13 00:00:00.0
    How to define the date format in control file for sqlldr. "yyyy-mm-dd hh24:mi:ss" or "yyyy-mm-dd hh24:mi:ss.FF1" does not work
    thanks,

    SQL> desc t
    Name                                      Null?    Type
    TS                                                 TIMESTAMP(6)
    SQL> !cat t.ctl
    load data
    into table t
    truncate
    (ts timestamp "YYYY-MM-DD HH24:MI:SS.FF1")
    SQL> !cat t.dat
    2006-11-13 00:00:00.0
    SQL> !sqlldr userid=scott/tiger control=t.ctl data=t.dat log=t.log
    SQL*Loader: Release 10.2.0.3.0 - Production on Fri Sep 7 11:19:28 2007
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Commit point reached - logical record count 1
    SQL> select * from t;
    TS
    13-NOV-06 12.00.00.000000 AMBest regards
    Maxim

  • How to save the data present in TEXT BOX?

    Hi friends i am able to create a text editor in one of my screen but i want to know how to save the data when the text is entered in that text box and retrive when they open the screen?

    Hi ,
    Please check the format below since it is based on a working code
    first you need to create a text in s010 function module...
    there should be some key based on which you plan to save the text..imagine it is Purchase order then..PO+item numner is always unique.eg:0090010(900PO/item10).so in the code you can append these two and they will be unique..so you can always retrieve them,overwrite,save them anytime you need
    **************data declarations
    TYPES: BEGIN OF TY_EDITOR,
    EDIT(254) TYPE C,
    END OF TY_EDITOR.
    data: int_line type table of tline with header line.
    data: gw_thead like thead.
    data: int_table type standard table of ty_editor.
    ****************fill header..from SO10 t-code..when you save you need the unique key..youfill it here and pass it in save_text function module
    GW_THEAD-TDNAME = loc_nam. " unique key for the text -> our unique key to identify the text
    GW_THEAD-TDID = 'ST'. " Text ID from SO10
    GW_THEAD-TDSPRAS = SY-LANGU. "current language
    GW_THEAD-TDOBJECT = 'ZXXX'. "name of the text object created in SO10
    *To Read from Container and get data to int_table
    CALL METHOD EDITOR ->GET_TEXT_AS_R3TABLE
    IMPORTING
    TABLE = int_table
    EXCEPTIONS
    ERROR_DP = 1
    ERROR_CNTL_CALL_METHOD = 2
    ERROR_DP_CREATE = 3
    POTENTIAL_DATA_LOSS = 4
    others = 5.
    IF SY-SUBRC 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    loop data from int_table and save to int_line-tdline appending it.
    *save the text
    CALL FUNCTION 'SAVE_TEXT'
    EXPORTING
    HEADER = GW_THEAD
    TABLES
    LINES = InT_LINE
    EXCEPTIONS
    ID = 1
    LANGUAGE = 2
    NAME = 3
    OBJECT = 4
    OTHERS = 5.
    IF SY-SUBRC 0.
    ENDIF.
    *To pass to Container
    CALL METHOD EDITOR ->SET_TEXT
    hope that the above sample with helps you solve the problem
    Please check and revert,
    Reward if helpful
    Regards
    Byju

  • Camileo S20 - How to display the date and time

    Hi, to all. I have got as Christmas present the Camileo S20 and I am not able to display the date and time at video. In manual is no mention about this, just how to set the correct date and time. But what is intention of setting the date and time into camera, if it is not possible to display them on video ?

    Hi,
    of course, I did it repeatly, it is written in my question above. I am not stupid.
    This question is aimed to owners of camera Camileo S20 and also Camileo S10 - Camileo S20 is derived of Camileo S10, may be any of them discovered the way how to get the date and time into video.

  • How to download the data which is in the table?

    how to download the data which is in the table?
    every field data in the table i want to download and once the download is finished then i have to set the flag as 'download is finished ' as one field in table?
    can any one help me in this.
    Phani.
    Edited by: phani kumarDurusoju on Jan 9, 2008 6:36 AM

    One way is to Download the data Directly from the database table using the path SE11->Give table name ->Execute -> system ->List ->Save ->Local File
    There u can downlaad the data .
    The ither way is to use the code
    The Following Code will be helpfull to You
    Data :ITAB  TYPE TRUXS_T_TEXT_DATA,
            FILE  TYPE STRING.
             C_ASC     TYPE CHAR10   VALUE 'ASC',
    DATA: L_STATUS TYPE C,
           L_MESSAGE TYPE PMST_RAW_MESSAGE,
           L_SUBJECT TYPE SO_OBJ_DES.
    DATA: L_FILELENGTH TYPE I.
      PERFORM download_to_pc
                  TABLES
                     itab
                  USING
                     filename
                     c_asc
                     c_x
                  CHANGING
                     l_status
                     l_message
                     l_filelength.
    FORM DOWNLOAD_TO_PC TABLES   DOWNLOADTAB
                        USING    FILENAME
                                 FILETYPE TYPE CHAR10
                                 DELIMITED
                        CHANGING STATUS
                                 MESSAGE TYPE PMST_RAW_MESSAGE
                                 FILELENGTH TYPE I.
      DATA: L_FILE TYPE STRING,
            L_SEP.
      L_FILE = FILENAME.
      IF NOT DELIMITED IS INITIAL.
        L_SEP = 'X'.
      ENDIF.
      STATUS = 'S'.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          FILENAME                = L_FILE
          FILETYPE                = FILETYPE
          WRITE_FIELD_SEPARATOR   = L_SEP
        IMPORTING
          FILELENGTH              = FILELENGTH
        TABLES
          DATA_TAB                = DOWNLOADTAB
        EXCEPTIONS
          FILE_WRITE_ERROR        = 1
          NO_BATCH                = 2
          GUI_REFUSE_FILETRANSFER = 3
          INVALID_TYPE            = 4
          NO_AUTHORITY            = 5
          UNKNOWN_ERROR           = 6
          HEADER_NOT_ALLOWED      = 7
          SEPARATOR_NOT_ALLOWED   = 8
          FILESIZE_NOT_ALLOWED    = 9
          HEADER_TOO_LONG         = 10
          DP_ERROR_CREATE         = 11
          DP_ERROR_SEND           = 12
          DP_ERROR_WRITE          = 13
          UNKNOWN_DP_ERROR        = 14
          ACCESS_DENIED           = 15
          DP_OUT_OF_MEMORY        = 16
          DISK_FULL               = 17
          DP_TIMEOUT              = 18
          FILE_NOT_FOUND          = 19
          DATAPROVIDER_EXCEPTION  = 20
          CONTROL_FLUSH_ERROR     = 21
          OTHERS                  = 22.
      IF SY-SUBRC <> 0.
        STATUS = 'E'.
        CASE SY-SUBRC.
          WHEN 1.
            MESSAGE = 'gui_download::file write error'.
          WHEN 2.
            MESSAGE = 'gui_download::no batch'.
          WHEN 3.
            MESSAGE = 'gui_download::gui refuse file transfer'.
          WHEN 4.
            MESSAGE = 'gui_download::invalid type'.
          WHEN 5.
            MESSAGE = 'gui_download::no authority'.
          WHEN 6.
            MESSAGE = 'gui_download::unknown error'.
          WHEN 7.
            MESSAGE = 'gui_download::header not allowed'.
          WHEN 8.
            MESSAGE = 'gui_download::separator not allowed'.
          WHEN 9.
            MESSAGE = 'gui_download::filesize not allowed'.
          WHEN 10.
            MESSAGE = 'gui_download::header too long'.
          WHEN 11.
            MESSAGE = 'gui_download::dp error create'.
          WHEN 12.
            MESSAGE = 'gui_download::dp error send'.
          WHEN 13.
            MESSAGE = 'gui_download::dp error send'.
          WHEN 14.
            MESSAGE = 'gui_download::ubknown dp error'.
          WHEN 15.
            MESSAGE = 'gui_download::access denied'.
          WHEN 16.
            MESSAGE = 'gui_download::dp out of memory'.
          WHEN 17.
            MESSAGE = 'gui_download::disk full'.
          WHEN 18.
            MESSAGE = 'gui_download::dp timeout'.
          WHEN 19.
            MESSAGE = 'gui_download::file not found'.
          WHEN 20.
            MESSAGE = 'gui_download::dataprovider exception'.
          WHEN 21.
            MESSAGE = 'gui_download::control flush error'.
          WHEN 22.
            MESSAGE = 'gui_download::Error'.
        ENDCASE.
      ENDIF.
    ENDFORM.             "download_to_pc
    At The End Reward points.
    Please it's Required.
    Thanks ,
    Rahul

  • How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

    How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

    If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
    That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
    This page is a good starting point for learning about Flex and PHP communication:
    http://www.adobe.com/devnet/flex/flex_php.html
    Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/

  • How to store the data coming from network analyser into a text or excel file

    Hii everyone
    I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
    Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
    Attached is the vi for kind consideration...
    Looking for help
    Regards
    Rohit
    Attachments:
    Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

    First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
    The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
    The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How to delete the data in the compressed  infocube

    hi, bi gurus
    we are facing a problem in inventory management the info cube in BW production
    normally every time inventory cube gets compressed that means the data will be moving to F fact table to E fact table
    now the problem is we are having some bad data for latest five requests in this cube as we all know compressed data
    can't be delete by deleting request in the request tab the only way is go for selective deletion but i don't find any selective
    option in the cube we are PSA data for that five request which having correctdata please help how to delete the bad data in the
    info cube and load the correct data which we are having in PSA
    Thanks
    Joe

    Hi André
    Thanks you for ur answer
    what i am telling is their is an option for selective deletion for inventory cube
    but i don't find any specific option to delete the data that means like calendar day like that
    i hope you got my question.
    hi Saveen Kumar,
    Thank you again
    we are using 3.xx flow if we do the request reverse posting for all the 5 requests which has updated incorrect data
    next we need to do compression also or not
    and how to reload the data from PSA to Infocube becuse if request still avaliable in info cube it will not allow me to do that
    can you please tell me detail how to proceed in step by step this is first time i am doing request reverse post and i have to do it production please tell me
    Thanks in adavance
    Thanks,joe

  • How to get the date of first day of a week for a given date

    Hi gurus
    can any one say me how to get the date of first day(date of Sunday) of a week for a given date in a BW transformations. For example for 02/23/2012 in source i need to get 02/19/2012(Sunday`s date) date in the result. I can get that start date of a week using  BWSO_DATE_GET_FIRST_WEEKDAY function module. But this function module retrieves me the  start date as weeks monday(02/20/2012) date. But i need sundays(02/19/2012) date as the start date. So it would be really great if anyone sends me the solution.
    Thanks
    Rav

    Hi,
    The simplest way would be to subtract 1 from the date date which you are already getting in transformation routine, but instead of doing that subtraction manually which might need bit of errort, you can simply use another FM to subtract 1 from given date.
    RP_CALC_DATE_IN_INTERVAL
    Regards,
    Durgesh.

  • How to retrive the data from a sqlite file(.db3) in windows phone 8.1(runtime)

    hey guys
    i installed the sqlite and sqlite-net as requested in other answers i found, changed to x86, and add the .db3 file in my project.
    but the problem is how to retrive the data that already in the file( i am not creating any table or data in the app, just read)
    all the answer i found is to create a table first and then read the table, i tried to skip the step of creating a table, and read from the table directly, but failed with " no such table", by the way, i set the property of the .db3 file as "content",
    "copy if newer"
    can anyone please help? i appreciate that !

    Hello,
    From your description, you want to read data from available sqlite file. When you add the sqlite file into your project, you need to change the sqlite file build action to content. After deploying to device, the sqlite file is located in installation folder,
    you need to copy that file into storage folder before reading data. Please try the following code snippets.
    private async void Button_Click_9(object sender, RoutedEventArgs e)
    //check if file exists in storage folder, and then copy to local storage
    bool flag = await FileExistsAsync("Data.db3");
    if (!flag)
    var folder = await Package.Current.InstalledLocation.GetFileAsync("Data.db3");
    await folder.CopyAsync(Windows.Storage.ApplicationData.Current.LocalFolder);
    // open sqlite and read data
    public async Task<bool> FileExistsAsync(string fileName)
    try
    await Windows.Storage.ApplicationData.Current.LocalFolder.GetFileAsync(fileName);
    return true;
    catch (FileNotFoundException)
    return false;
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
    the survey.

  • How to recover the data from a  dropped table in production/archive mode

    How to recover the data/change on a table that was dropped by accident.
    The database is on archive mode.

    Oracle Version. ? If 10g.
    Try this Way
    SQL> create table taj as select * from all_objects where rownum <= 100;
    Table created.
    SQL> drop table taj ;
    Table dropped.
    SQL> show recyclebin
    ORIGINAL NAME    RECYCLEBIN NAME                OBJECT TYPE  DROP TIME
    TAJ              BIN$b3MmS7kYS9ClMvKm0bu8Vw==$0 TABLE        2006-09-10:16:02:58
    SQL> flashback table taj to before drop;
    Flashback complete.
    SQL> show recyclebin;
    SQL> desc taj;
    Name                                      Null?    Type
    OWNER                                              VARCHAR2(30)
    OBJECT_NAME                                        VARCHAR2(30)
    SUBOBJECT_NAME                                     VARCHAR2(30)
    OBJECT_ID                                          NUMBER
    DATA_OBJECT_ID                                     NUMBER
    OBJECT_TYPE                                        VARCHAR2(19)
    CREATED                                            DATE
    LAST_DDL_TIME                                      DATE
    TIMESTAMP                                          VARCHAR2(19)
    STATUS                                             VARCHAR2(7)
    TEMPORARY                                          VARCHAR2(1)
    GENERATED                                          VARCHAR2(1)
    SECONDARY                                          VARCHAR2(1)
    SQL>M.S.Taj

  • How to export the data to a excel file from RSA3?

    Hi experts,
    1.I am trying to save the RSA (SRM extractor) to excel spread sheet to compare SRM data with BI data. When i run the the transaction RSA3 it just showed me 10 different data packets. How to export the data to excel spread sheet for reconciliation?
    2. Does any body know if the stepup tables exist for SRM extractors?
    Thank in advance
    Sharat.

    Hello Sharat,
    You have two options of saving data to excel sheet:
    Step 1: 
    Goto RSA3, change the "Data Records / Calls" to 1000 and then execute. This way instead of 10 different packets you will get one packet.
    Step2:
    Click on the list button, open the packet by double clicking it. You will see all the data on your screen.
    Step3:
    Goto System -> List -> Save - > Local File -> Spreadsheet and give some name for your xls file.
    Assign points if helpful.
    Regards,
    F-S

  • How to find the data loaded from r/3 to bw

    hi
    how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild  and table the data is comming from . plz help
    thanks in advance to u all

    Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
    So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
    As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
    Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
    Good job
    GFV

Maybe you are looking for