How to presents links as icons?

Or how to add a link to an image?
Im in the beginning of my portal-life and i just want to add a URL that displays with an icon only, or too add an image that is clickable and leads to another page.
Im sure this is nice and easy i just cant see how...?

Create a URL item and upload an image for it (or point to an image).
Depending on your region properties, you may have to specify that you only want to display the "Display Name or Image".
Regards,
Jerry

Similar Messages

I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

- Have you tried a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try syncing the iPod to your computer. Then delete from iTunes and sync. that should delete it from the iPod. Then redownload it.

How to present a link to job (I want to bypass job output cycle wizard)

Dear firends
How to present a link to job (I want to bypass job output cycle wizard to open MyExample.BQY)
http://MyServer:45000/workspace/browse/get/KursHYP2008/siyavus/MyExample?jobOutput=true&user=admin&pass=password
this link shows wizard to open MyExample.BQY that I need to bypass it by putt it as parameter,
regards

Hello. Any update on this one ???
Thanks in advance ...!

Link layers icon hidden, how to activate it?

I am a beginner user of Photoshop Elements 8. I am in the process of learning how to use the layer process and cannot figure out how to activate the link layer icon in my layers panel. Any suggestions will be welcomed. I have not used this Adobe Community Discussion previously. Thanks. Donna

Barbara B.
Thank you so very much!!!! It worked. I am so pleased with your quick reply to my challenge of activating the layer link icon!!!! Have a great evening!
Donna B.

How do I link iCloud up with my stuff from my iPhone to appear on my iPad. Through both devices iCloud APPS are all switched to "on" Do I have to click the storage and backup icon or no?

How do I link iCloud up with my stuff from my iPhone to appear on my iPad. Through both devices iCloud APPS are all switched to "on"
Do I have to click the storage and backup icon or no?

Welcome to the Apple Community.
What exactly do you mean by your stuff, what type of documents are you talking about.

How to update link and import data of relocated incx file into inca file?

Subject : how to update link and import data of relocated incx file into inca file.? The incx file was originally part of the inca file and it has been relocated. ------------------- Hello All, I am working on InDesignCS2 and InCopyCS2. From indesign I am creating an assignment file as well as incopy files.(.inca and .incx file created through exporing). Now indesign hardcodes the path of the incx files in inca file.So if I put the incx files in different folder then after opening the inca file in InCopy , I am getting the alert stating that " The document doesn't consists of any incopy story" and all the linked story will flag a red question mark icon. So I tried to recreate and update the links. Below is my code for that //code start***************************** //creating kDataLinkHelperBoss InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*> (CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss))); /** The newFileToBeLinkedPath is the path of the incx file which is relocated. And it was previously part of the inca file. eg. earlier it was c:\\test.incx now it is d:\\test.incx */ IDFile newIDFileToBeLinked(newFileToBeLinkedPath); //create the datelink IDataLink * dlk = dataLinkHelper->CreateDataLink(newIDFileToBeLinked); NameInfo name; PMString type; uint32 fileType; dlk->GetNameInfo(&name,&type,&fileType); //relink the story InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA); relinkCmdData->Set(database, dataLinkUID, &name, &type, fileType, IDataLink::kLinkNormal); ErrorCode err = CmdUtils::ProcessCommand(relinkCmd); //Update the link now InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); UID newLinkUID; err = updateLink->DoUpdateLink(dl, &newLinkUID, kFullUI); //code end********************* I am able to create the proper link.But the data which is there in the incx file is not getting imported in the linked story.But if I modify the newlinked story from the inca file,the incx file will be getting update.(all its previous content will be deleted.) I tried using Utils<IInCopyWorkflow>()->ImportStory() ,But its import the incx file in xml format. What is the solution of this then? Kindly help me as I am terribly stuck since last few days. Thanks and Regards, Yopangjo

>
I can say that anybody with
no experience could easily do an export/import in
MSSQLServer 2000.
Anybody with no experience should not mess up my Oracle Databases !

I have a website listed as an extension. How do I get the icon into my desktop or on the toolbar?

I have the Grammarly website icon on my list of extensions. Its supposedly one of Firefox add ons. How do I move this icon to either the desktop or bookmarks or the Firefox toolbar? Anywhere so I can access it.

Thanks for your reply, but sorry, still no luck.
If I go to the Grammarly web-site, the only option presented is a subscription, for a fee. Bookmarking doesn't help; it's the same page.
So I go to tools, clik on Add-ons, and pull up the Mozilla Firefox page offering Grammarly Lite, Free. I clik on the yellow button that says, Add to Firefox, and it then appears as an extension. That's as far as it goes.
I need a firefox/grammarly icon, or something, to clik on and open it up so I can use it. I don't understand, Firefox has been my browser for years???
Thanks, John

How do I link one button to two slices?

Hello,
I need some help please. How do I link one button to two
slices? or combine two slices to make one slice, or make a true
polygon shape out of the slices, it will make the polygon shape but
it leaves the the red guide lines and I cant work under that
slice... if you understand. Will someone please help. Thank you so
much.

heathrowe wrote:
> Did you Hide Slices?
>
> Select the Pointer Tool and click your Object? It should
get selected.
>
> What happens when you mouse over the 'star' object? Do
you get the 'object
> selection' bounding area appear? Bounding area should
appear red when you mouse
> over it? Yes/No!
>
> Also, go to your Layer Panel and make sure that your
object/Layer is not
> 'locked'. Look for little 'padlock' icons next to the
Layers. If you see it,
> click it, to toggle it to 'off'.
>
> h
>
Also make sure you are not in PREVIEW mode in the document
window.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
See my work on Flickr
http://www.flickr.com/photos/jim_babbage/

Beginner advise needed on how to find link for app on ipad.

I am an absolute beginner with a recently purchased ipad 2. I have just purchased garageband from the app store but how do I open it? There is no link on my ipad anywhere but when i check settings it says that garageband is installed. Can someone please advise me on how to find link or am i missing somethng really obvious here, cheers.

Look for the Garage Band icon on one of your home screens. Tap on it in order to launch it. Swipe from one screen to the next (swipe to the left with your finger) if you do not see it on the first screen.
If you still can't find it - swipe to the right from your very first home screen and a search feature appears on the screen. Type Garage Band in the text field and search for the app.

In ER DIagram using toad( how can i link two tables)

Hi,
Any Toad expert can guide me that how can i link two tables in Toad in ER Diagram to show the relationship between two tables.
Thanks

Hi,
I hope there is foreign key relationship in tables, if so then you can click on "Find table dependencies" icon which will draw lines between them.
~Vinod

BUS2089 for travel expense claim. How can i link it to portal?

Dear Expert,
I had created a customize object from the standard BUS2089 and named it ZBUS2089 and i have a workflow that trigger based on the ZBUS2089 object created.
My question is how do i link this object to my travel expense request. I want when the employee click on submit on the portal side, instead of triggering the standard BUS2089, i wanted to trigger my customise object ZBUS2089.
Thanks
Regards,
Bryan
Edited by: Brian Lee on Mar 25, 2008 3:23 AM

Hi Kappy,
The situation is hard to describe it seems. They say a picture is worth a thousand words, so I'll show screen shots....
Clicking on the Desktop icon does not open a finder window but rather opens a program. The problem seems to be that the "desktop folder" in the finder is not recognized as a "folder" but rather is listed as "anything".
Here is what the folder should be normally. (shot taken from another account on the same computer).
Solutions tried to fix this problem:
1. tried to delete the Desktop icon, and to pull it off to the trash and also to move the icon somewhere else. The icon doesn't change.
2. I've taken the icon off by removing it in the finder settings. When re-checked, the problem stays the same.
3. I've deleted the finder.plist file and the sidebar plist file in my account.
4. I've repaired permissions.
5. I've tried to re-assign the link in the info pane - associating the icon with the "finder"
I have three accounts on my computer. My main account is the only one affected by this problem.
Anyone who might have a solution, I'd love to hear your ideas!
It looks like the "kind" needs to be changed from "anything" to "folder" but I don't know how to do that.
Thanks for your help!
Douglas

How is solman linked to r/3

pls let me know ....for a E2E implementation project in which sol man is used, how solman is linked to migrate the data and configuration to r/3 landscape that is to development server (r/3 ) ,then to quality and finally to production.
Basically how will solman help in r/3 configuration

Hi
BASIS does all the connections of the Logical sytems - Saying DEV - development server QA - quality - PROD - Production.
So first you need to create the business blue print first and then assign all the configurations necessary.
Its not mandatory that transports needs to be maintained from solman, it can be done indpendently also.
This linkaing is also done by the BASIS only. we have to just click on the configuratuion icon visible for transaction
these are the transactions used
SOLAR_PROJECT_ADMIN - Project Administration
SOLAR01 - Business Blueprint
SOLAR02 - Configuration
SMSY - System Landscape
SCDT_SETUP - Customizing Distribution
SCOUT - Customizing Scout
Plese go through the link for more details
http://help.sap.com/saphelp_smehp1/helpdata/EN/b3/64c33af662c514e10000000a114084/frameset.htm
Thanks & Regards
Kishore

How do i link photoshop elements 11 organizer to my existing photoshop CS editor

how do i link photoshop elements 11 organizer to my existing photoshop CS editor?
This used to work on elements 8.
I used the elements 11 edit preferences menu, and it wouldn't accept my browse of photoshop.exe (the CS version).
Suggestions?
Ed

Hi Ed,
If PS is installed on your system, you can directly access it for editing without the need to add it anywhere in Organizer preferences.
You can select a file and click Editor button present on the bottom action bar or say use Ctrl+H shortcut. That should create a version-set file for your image and open the same in PS for editing.
Thanks
Andaleeb

Web links as icons on iPad

I like to create web links as icons on my iPad (using "Add to Home Screen" in Safari).

I like to create web links as icons on my iPad (using "Add to Home Screen" in Safari). Today, though, I found a few of my older ones where the URL is no longer valid and so I was trying to get rid of them.
I press on the icon and hold till all the icons begin to wiggle with the little X in the upper left corner. However, if I tap the X on something I want to delete, instead of deleting, the icon along with random other icons on the same home screen start flashing to appear and disappear. All the icons retain the X in the corner but their rate of "wiggling" slows down.
Pressing the Home button does nothing to change the situation. The only way I could stop it is to reboot the iPad or attempt a reset.
Another anomaly that occurred today is that my web link icons all took on a generic appearance of white with a black grid. I have only been able to restore the original appearance of some of them by using them to access their URL - sometimes when the underlying URL fully loads in Safari, the link icon will pick up an image, sometimes it won't.
Thanks in advance for any suggestions on how to resolve this.

How to present a Webpage composer content to an end user

Hi Gurus,
please give me solution to this.
how to present an article created in WPC to an end user with proper permission settings.
Thanks & Regards
Vipin

Vipin,
Following would be some key stpes in order to publish article created in WPC to end user.
1. Create a WebSite
Navigate to one of the following folders as appropriate
To create a Web site: /Web Content/Sites
To create a subordinate Web site: /Web Content/Sites/<MyWebSite>
You must create all Web sites in the folder structure beneath /Web Content/Sites
2. Create Web Component
Navigate to /Sites/WPC Site/Web Page
3. Web Page will appear under Sites/WPC Site/Web Pages
4. Adding Web Content (e.g. article) to Web Page
Right click on WPC Page and choose Edit Page.User will be presented with default layout of Web Page. This can be changed according to requirements.To Add content, place cursor on pencil icon ( ) and choose Add.Navigate to a folder containing shared content (for example, Site Content), or create new Web content to be displayed exclusively on this page.In the Web content browser, click the icon for an item and use Drag &Drop to drag it into container.
5. Publishing Web Pages
Go to the /Web Content/Sites/WPC Site/Site Navigation folder
Choose New --> Navigation Node.
Publish the site navigation structure.
Go to the /Web Content/Sites/WPC Site folder.
From the context menu for the Site Navigation folder, choose Publish Site Navigation.
In the Web Page Composer, navigate to the Web site that you want to integrate into the portal navigation, and open the Site Navigation folder there.To copy the path of the navigation.wpc file to the clipboard, choose Copy Path from the context menu for the file.
Choose Content Administration --> Portal Content
Open a role for editing and create a folder in that role, beneath which you want to display the navigation structure of the Web site. Select the folder beneath which you want to display the navigation structure of the Web site. Choose the Navigation property category. For the property External Connector, enter the prefix wpcnavigation:// and insert the path from the clipboard.
The Web site is contained in the role immediately once you have saved it.
~Cheers,
Vivek

How to presents links as icons?

Similar Messages

Maybe you are looking for