How to preserve conservation mode when unplugged from AC

Every time I turn off the computer and unplug the power cable, Conservation Mode is disabled automatically. I just want to know if this is a normal behaviour or a bug.
Lenovo G50-70
Energy Manager 1.0.0.33

Hi reversiblean
Please recall that this is a peer-to-peer support community, where members help one another and share there experiences.Not dedicated support.
While Lenovo may engage specific discussions from time to time, there is no guarantee of a response to any particular thread. If you require dedicated Lenovo support, you'll need to contact the appropriate group in your geographic location.
Country: Sri Lanka
Product:IDEA-branded and B, C, E, G, H, K, N, Q, V, Y Series Products
Phone Number / Supported Language: 9411-2316-444 (Allied Techno Services Private Limited) / English
Hours of operation: 8:00 - 17:00 Monday - Friday (Except Holidays)
Hope this helps.
Regards.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Macbook Pro 17" (Mid-2009) Randomly Getting Stuck in Sleep Mode when Unplugged

Hey guys, this is my first time posting so please excuse me if I do anything wrong. Here's the issue:
I have a Macbook Pro 17" (Mid-2009) that has had an issue with the whole computer shutting down at random, but only when unplugged from the MagSafe power adapter. Upon scouring all the forums and discussions I could, I haven't found anyone with the same exact circumstances as myself, hence this post. Let me explain.
Many say it's a battery issue. That can't be, because this has been happening for months, and after I finally got my laptop repaired a few days ago, it still occurs. I had sent it in for a logic board failure, but consented them to fix any other parts that weren't functioning properly. Upon the return of my machine, I found that they installed a fresh hard drive, new battery, new logic board, and a new speaker on the right side. This must mean that neither the logic board nor the battery are the issue.
What else can this point to? Again, it only occurs when the Mac is unplugged from a power source, and it doesn't totally shut down. It goes half way, essentially stuck in sleep mode. The white indicator light on the front freezes, and the power button has to be held to fully turn the laptop off, then pressed again to reboot. It can last anywhere from a single minute to a few hours before shutting off again, and it's always the exact same circumstance, no matter what kind of computing I'm doing at the time.
Note that while no one else has found the solution to lie within resetting the PRAM or SMC (in the discussions I read), I still need to try that tonight and see if it affects anything.
Thanks in advance,
Sean

Macs are having problems with SSD drives. The root cause is the OS X journaling file system. The Apple-written SATA controller driver can saturate the bus at times, inhibiting performance. Some manufactures are even selling special "Mac" versions of their SSD drives that are slowed down on purpose to compensate for this problem. Unfortunately, the problem still exists in Snow Leopard, from what I've read.
Also, I read that Apple has secretly slowed the recent new laptops down (3.0GB/s to 1.5GB/s) to compensate for the problem.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Running BDC in 'A' mode when called from Enterprise portal

HI All,
I have created a RFC which contains a BDC program that update data in SAP R/3. The RFC is called from Enterprise portal. Is it possible to run the rfc in A(all screen display) mode while calling from EP. I have tried it but it gives following 2 errors on EP
cm_no_data_received
rfc_error_communication
what changes i have to do so that i can run the BDC in 'A ' mode when called from Enterprise portal

it would not be related to EP administration issues but something to do with GUI usage. it is loggically fare enough not to give options of viewing the debug screen in as it might concern security issues inway the data could be edited at any point of time. Moreover the screens u see in R3 are ABAP but whereas in EP it is purely based on Java and the calls to SAP is done via JCO thus enabling ABAP functionalities in EP. Maybe for these technical reasons or constraints it wont be possibel to view the screen in EP eventhough u had ext.bp activated

How can I compress photos when emailing from iphoto? current photos are 7-8Mb each

How can I compress photos when emailing from iPhoto?
current photos are 7-8Mb each if I just attach them directly

Aperture won't delete the photos from your iPhone. Most users have settled on using Image Capture ater importing into Aperture to delete the photos from the iPhone.

TS1363 my iphone 4 doesnt show up in itunes. it is also locked on the 'connect to itunes screen' when unplugged from the computer. help me!

my iphone 4 doesnt show up in itunes. it is also locked on the 'connect to itunes screen' when unplugged from the computer. help me!

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

How to open a MD form in insert mode when calling from URL ?

I have a MD form and I want to open it in 'insert' mode when I click on the URL.
How can I do that ?
thanks,
Mainak

I think somebody has asked the same questions earlier but I cannot find the link to that message. Please can anyone help me ?
How to open a form in Insert mode from url link ?
Mainak

Using Illustrator CS6, how to preserve drawn colors when Save For Web to PNG?

Using Illustrator CS6 on Mac OSX 10.9.1:
step 1. I open a new file for Web profile.
step 2. I verify that File > Document Color Mode is RGB.
step 3. I draw a square and set it's color to 0,103,197 (decimal).
step 4. I click File > Save For Web
step 5. In the popup that opens, I set to PNG-24, and verify the option Convert To sRGB is not selected.
step 6. Using the Mac's DigitalColorMeter, I observe the color is 0,109,191 in the Save For Web popup. If I save it, then open the saved PNG file, it's color is also 0,109,191.
How to do this so the colors don't change?
step 7. I close Save For Web popup.
step 8. I verify Edit > Color Settings for Working Spaces is set to Monitor RGB, and that the Color Management Policies for RGB is off.
step 9. I verify Edit > Assign Profile is set to Don't Color Manage This Document.
step 10. I verify View > Proof Colors is off.
Can anyone provide a set of Illustrator CS6 settings that let me save a PNG image with the same colors it's drawn in so I can use that PNG image in a website?
I must be missing something obvious, because anyone working in web design must do this day in and day out, please let me know what procedure people follow to achieve this.
UPDATE:
Using the above procedure DOES preserve the colors when embedding the PNG image in a webpage viewed in Firefox and Chome, but NOT for Safari. Also, the colors are not preserved in Mac's Preview software, as well as Microsoft Office 2011 for Mac.
I'm pretty new to all this. Hoping someone can provide some perspective on what typical procedure people use for web development when working with colors in Illustrator CS6.

Using Illustrator CS6 on Mac OSX 10.9.1:
step 1. I open a new file for Web profile.
step 2. I verify that File > Document Color Mode is RGB.
step 3. I draw a square and set it's color to 0,103,197 (decimal).
step 4. I click File > Save For Web
step 5. In the popup that opens, I set to PNG-24, and verify the option Convert To sRGB is not selected.
step 6. Using the Mac's DigitalColorMeter, I observe the color is 0,109,191 in the Save For Web popup. If I save it, then open the saved PNG file, it's color is also 0,109,191.
How to do this so the colors don't change?
step 7. I close Save For Web popup.
step 8. I verify Edit > Color Settings for Working Spaces is set to Monitor RGB, and that the Color Management Policies for RGB is off.
step 9. I verify Edit > Assign Profile is set to Don't Color Manage This Document.
step 10. I verify View > Proof Colors is off.
Can anyone provide a set of Illustrator CS6 settings that let me save a PNG image with the same colors it's drawn in so I can use that PNG image in a website?
I must be missing something obvious, because anyone working in web design must do this day in and day out, please let me know what procedure people follow to achieve this.
UPDATE:
Using the above procedure DOES preserve the colors when embedding the PNG image in a webpage viewed in Firefox and Chome, but NOT for Safari. Also, the colors are not preserved in Mac's Preview software, as well as Microsoft Office 2011 for Mac.
I'm pretty new to all this. Hoping someone can provide some perspective on what typical procedure people use for web development when working with colors in Illustrator CS6.

IPod Mini refuses to sleep when unplugged from power

Hello, I have a problem with the Sleep function in my Mini. The whole of the context is as follows:
After a period of inactivity (two weeks approx.) I wanted to use my Mini. However, after rousing it from sleep, it immediately froze. When it did respond, any input from the wheel, the buttons or the Hold switch would take up to a minute to be registered on the display. Resetting (toggle Hold, press and hold "Menu" + "Select") did nothing to solve the issue, either plugged or unplugged from the PC or the power adapter. Thinking this might be a one-in-a-million bug, I went and used the iPod Updater to restore it to factory settings and update to the latest firmware (1.6, if I recall correctly.)
That did the trick as far as the random freezes went, and the iPod hasn't frozen since. However, it has completely lost the ability to sleep unless I enable the Sleep Timer. Whether this is a result of the bug which caused the freezes, or a bug from the update, I don't know. I have tried holding the Play/Pause button, selecting the "Sleep" option from the main menu, and performing soft-resets on a variety of situations (connected to the PC, connected but ejected, connected to the adapter, disconnected...) and the device won't go into sleep mode.
Ironically, the Sleep function DOES work perfectly when it's plugged into the PC and charging the battery. Both the Play/Pause method and the menu option respond correctly. Of course, being able to sleep when it's already charging doesn't help much.
Obviously, I've taken care that the Hold switch is toggled to the "off" position, and I have reset the poor mini so many times I'm anxious about causing it damage. As it is, my only option is to set the Sleep Timer to 15 minutes and simply interact with the iPod until I'm ready to let it turn itself off.
Any help would be appreciated. While I wouldn't run out of battery charge (or so I hope) during the day's use, it's still a worrisome bug, and it essentially keeps the iPod anchored to a power source every eight hours, even if I don't use it.

To elaborate more on what Rob said. Since the iPod is a hard drive based device(similar to your computer) the disc inside spins and there is a needle to read the data.
What you are suggusting would be like yanking the power cord out of your computer in mid install of something, the chance of data lose is there and if happened enough bad sectors can arise. Should you do that? No, Would you do it? In most cases not.
A bad sector would in most causes make the ipod freeze when accessing it or make it fail its disk check and requiring replacement.

Prevent Macbook/Cinema display sleep mode when switching from plugged-in/off

Hello, I've a macbook connected to a Cinema Display. On Energy Saver, all is set to never go to sleep. I'm trying to prevent my macbook going to sleep mode when I plugged off it. Do you have any solution for this?

KinoBillie wrote:
Hi tjk,
Yes I mean when I disconnect the power supply (that comes from the Cinema Display) the macbook pro goes into sleep mode until i press a button on the keyboard, then it returns into running mode (even if in energy saver all is set to never go to sleep).
I would like that, if there is a power cut in my house, the mbp does not go into sleep mode but continue to be in execution (by means of battery) avoiding sleep mode.
Thanks
Looks like someone already cut in to try answering, but I'll answer the question you asked me anyway. You can read Apple's directions http://support.apple.com/kb/HT3131 and see that unplugging is the cause. It's not really an issue, it's just the way it works.
Contrary to the statement "There's no way around it." you may want to look into UPS (uninterrupted power supply) if it's important enough to you. I have never used one so I am not familiar with them, but by their very nature/purpose, I would think they'd do what you need.

How to transfer data & apps,When upgrading from a iPhone 3G to an iPhone 4 or soon 5

When upgrading from a iPhone 3G to an iPhone 4 or soon 5
How to transfer all phone number and apps and notes, pretty much copy my old iPhone to my new iPhone , all content and apps.
Will it transfer my text messages also?
Is this a nightmare or an easy task?

Connect to iTunes and backup. Then when you receive the new phone restore from that backup.
http://support.apple.com/kb/ht1766
http://support.apple.com/kb/ht1414

How to avoid the dialogue when converting from context menu

This is a follow-up to http://forums.adobe.com/message/2016146#443364 which was locked due to a bug.
i would like to know how i can avoid the 'save as' dialogue when using the context menu to convert a word file to pdf using windows XP/acrobat 8/word 2007.
so far, it always prompts me for the filename, which is annoying as it does not allow me to batch-convert several files and let the thing run its course.
the solution provided by Steve in the other thread does not work - even if the plugin from word does not propt for a filename, it still does when triggered from explorer/context menu.
so back to square one: how to avoid that dialogue when not opening word at all?
cheers, thanks for any help. michael

For a permanent change, START>PRINTERS>right click on Adobe PDF printer and select properties>General>Printing Preferences>Adobe PDF Settings. Under the settings tab, uncheck the box related to asking for a name. Pretty sure that is the location, but it may vary with version.

How to preserve and keep 2 Pantones from Illustrator, via Photoshop, to InDesign?

Ciao!
I have designed a 3D illustration in Illustrator (version 15.0.2), this illustration need to be printed for a magazine cover and I want to use 2 pantone colours for it.
The 2 pantone colours are assigned form the Swatch Palette.
The image is in CMYK (file > document colour mode > CMYK).
The illustration is in 3D and the text has been convereted in outline. But I have not expanded the appareance of any element.
I want to add more depht to the illustration and Photoshop seems the best solution for shadows and visually looks better.
Plus InDesign can manage Photoshops files with Effects very nicely.
[I find difficult and problematic to import Illustrators files with added Effects in InDesign, it leaves always a white background around the image and I don't know how to get rid of that.]
How do I import the image in Photoshop (version 10.0.2) and keep the pantone?
If I export/import the image as .psd format the files gest converted in CMYK automatically.
In the Swatch Panel (next to the pantones I want to use) I see two square boxex the first has a round gray circle (I don’t know what this means), the second has 4 triangles (this I believe means CMYK).
In the Separation Preview panel (if I click Overprint Preview) I have listed the 4 CMYK colours and the 2 pantones but if I turn off the 5 CMYK eyes I only see the white artboard, it’s like if the pantone are not assigned.
After adding the shadows in Photoshop I need to import the file from Photoshop to InDesign and the final file need to be transparent because there's a backround at the bottom and a box of text in between the background and the illustration.
I could place the bacground and the text in photoshop no problem for that...
The questions are how do I import the 3D file from Illustrator, keep the pantone and add the Photoshop shadow?
Hope anyone can help me as I'm going to press soon...
Please feel free to ask me anything else if need to answer the questions.
Many many thanks in advance if you can help me.
ASTIK

This first image is the file in ID with High Quality Display on
This is with Overprint Preview and that what I aming for, roughly, for the final. [I'm not sure what is the purpose of overprint preview in ID].
This is the 3 plates of Black and two pantones
This is the plate of Black plate
This is the Pantone 812 c plate
and finally this is the Pantone 8201 c plate
Hope this can help to get the best solution

How can I delete photos when importing from iPhone 4

I'm using Aperture 3.13 on Mac OS X 10.7.1. When I import photos from my iPhone 4 I am never asked to delete files from the camera roll.
What am I doing wrong? How can I have Aperture delete photos from the camera roll once they are imported?

Aperture won't delete the photos from your iPhone. Most users have settled on using Image Capture ater importing into Aperture to delete the photos from the iPhone.

How to preserve old dtd when using writetofile method

Hi,
I have one doubt.How to preserve the dtd of xmlfile before parsing it with the xml parser for pl/sql ,write this saved dtd to the document object and use to writofile method of the dom object.If this is possible then can anyone ,please give me suggestions.
I illustrate the situation ,given below is the dtd of the file before parsing :-
<!DOCTYPE family [
<!ELEMENT family (member*)>
<!ATTLIST family lastname CDATA #REQUIRED>
<!ELEMENT member (#PCDATA)>
<!ATTLIST member memberid ID #REQUIRED>
<!ATTLIST member dad IDREF #IMPLIED>
<!ATTLIST member mom IDREF #IMPLIED>
]>
After parsing and using the writetofile method ,the dtd present below is the changed dtd of the new xml file.
<!DOCTYPE family [
<!ELEMENT member ANY>
<!ATTLIST member memberid ID >
]>
Can anyone say how to stop this.Any help would be great
Regards
gopal

Hi, Kiran,
As the others have said, the only way ^1^ to get the result set in any particular order is to use an ORDER BY clause.
Here's the general way to do that in SQL in case of a UNION:
WITH union_results     AS
     select 'a' AS txt, 1 AS sort_key from DUAL
    union
     select 'd',        2             from DUAL
    union
     select 'b',        3           from DUAL
    union
     select 'c',        4           from dual
SELECT    txt
FROM       union_results
ORDER BY sort_key
;In SQL, you can only ORDER BY expressions that arei n the SELECT clause, so to avoid displaying sort_key, the sub-query is necessary. A lot of people don't use pure SQL for this; they have their front end hide the sort_key column. In SQL*Plus, for example, you can say COLUMN sort_key NOPRINT.
^1^ There is one exception, which does NOT apply to this case, or most others. CONNECT BY, even without ORDER BY, does impose a partial ordering.

How do I save itunes when upgrading from osx4 to osx5 ?

how do I save itunes. bookmark, when upgrading from osx4 to osx5?

When you upgrade attached to iTunes a backup copy is made...then after the upgrade the backup is used to restore all the content to your iDevice, assuming you are actually talking about upgrading from iOS 4 to iOS 5.

How to preserve conservation mode when unplugged from AC

Similar Messages

Maybe you are looking for