How to prevent incorrect approval of a trip

Hi
We have the situation where 2 approvers approve a trip in a workflow. If approver 2 forwards his WI to a person who is really approver 1, approver 1 can approve 2nd time as well. I suspect the problem is that they have the same authorization for trip. Could anyone tell med if there is a status or something for trip that decides that a person is allowed to do first approval but not second approval?
Any hints appreciated
Kirsten

Hi Kirsten,
Obviously when dual approval system takes place the both approvals should have the same authorization profiles, why because if one approval is not available(on leave) then second approval can approve the work item. Infect that is purpose to make dual approval system. But your case it is diffrent because your business process is to approve the same WI by two approvals if this is the case i think you need to keep some authorization check to not to allow the any approval to approve twice for the same work item. Please correct me if my understanding is wrong.
I think it might help,
Thanks,
Dora.

Similar Messages

Process in restarting a FRP-run: how to prevent incorrect analytics data

Hi,
Today we encountered an issue where stock-data where not transfered to F&R. As a result OrderProposals generated during FRP-run were based on incorrect stock stock-values. As a result also the OrderProposals resulting from the FRP-run were considered incorrect and have been deleted by the business.
After stocks were processed correctly to F&R, a new FRP-run was done for the first 4 sequences in /FRE/FRP_MID_BASIC. (Note that we have these first 4 steps executed in the time critical window, and the Analytics step as a separate job directly afterwards).
Result is ofcourse new, correct, OrderPropsals but also a second run of the Analytics step on the same planning-day. As a result, in table /FRE/ANA_WEEKLY the STOCK_COUNTER is increased 2 times during one planning-day, which will cause incorrect data at the end of the week regarding average weekly-stock level.
It appears, every time the Analytics-step in /FRE/FRP_MID_BASIC is executed on a day, the STOCK_COUNTER field is updated. (this can be reproduced). The result will be incorrect Analytics data if that happens, but on the other hand: not executing the Analytics step a second time during the planning-day will also result in incorrect Analytics data as in that case it would in my situation have contained the stock-data from yesterday(as the initial issue was that current actual stock-data was not sent to F&R)
Is this a bug in F&R, or am I missing something? If there is a guide on what steps to execute under what conditions if FRP-run has to be executed again, or how to correct any (incorrect)Analytics data built up during previous runs?

a reply/answer would be appreciated....

How to prevent the user to submit leave request?

Hi all,
If the employee has wrong setup in the AME approval,the error "ERROR: An Invalid Setup has been detected for the current Transaction Type in Approvals" will be raised, although the employee will be able to submit the request, the request will have pending for approval status.
How to prevent the user to submit the request when the error raised?
Any idea.
Regards

Hi,
Is this possible? Pl check the error and your Transaction type. Refer ID 420381.1(How to Create the Approval Transaction Type for AME.A?) and also refer Oracle White paper on
"Approvals Management Responsibilities and Setups in AME.B".
Hope this helps.
Regards,
Siva

How to prevent users accessing hotspot

hi all
i have to resolved this issue your help will be benefit for me
i have users on the internal network when using wireless has restrictions on brwosing the internet but if when the receive signal from hotspot or somewhere else they connect to it and have no restrictions on their laptops so can someone explain me how to prevent them connection to the hotspot when they are inside the corporate LAN
thx

If you have a Cisco WLC you can at least do rogue access point detection with Cisco Cleanair capable AP's.
Firstly, WLC cannot stop your staff from accessing your neighbor's Wi-Fi. You also cannot "jam" or contain your neighbor's Wi-Fi signal. As what Steve said, there's no way a Cisco appliance can do. A system/network admin can, on the other hand, lock down the profiles and policy via AD what the client can/can't do with wireless.
After a few fines/written discplinary actions people should stop.
If you tell a kid "no", what do you think a kid will do? This works the same way with adults.
Take our case, this government agency decided to embrace Wi-Fi. So they got this team together and we, networks, went around installing the latest Cisco WAP in a 10-storey building (including pre- and post- site survey). Works well. During tests, clients can seamlessly roam their laptops from one end of the floor to the other. Tick of approval.
Then security came, and they put down this policy:
1. No one can use internet dongles anymore; and
2. The only sites Wi-Fi users can use over the internet are Yahoo and Google
Because of this, everyone (and I mean EVERYONE) stopped using Wi-Fi. From the CEO down to the rank-and-file. Wi-Fi usage, per month, was at (an average) 12. Users went back to the un-restricted USB internet dongles and the Wi-Fi network became a white elephant. Internet usage cost went through the roof but the Security team stood their ground and did not waver.
My story is this: The more you restrict, the more they'll find loopholes. Every corporation is now being proactive and are implementing BYOD.

How to get the approver from a wf notification in case there are multiple approvers ?

I created an ad hoc role to store mutliple approvers for a wf notification.
My question is how to get the user_name of the first responder so I can stamp the record I need to update with it.
I''m assuming it would be using wf_notifications.GetAttrText but I don't know what that attribute name would be.
Please help.

Hello,
I think you can try with script to capture the duplicate booking on presave action. Just try to give a shot to this solution:
http://aleemsheikh.wordpress.com/2011/08/08/warn-users-of-double-booking-in-sharepoint-calendar-in-real-time/
http://social.msdn.microsoft.com/Forums/en-US/9a10a110-a18b-4b5b-a15f-b563322ca0a6/how-to-prevent-duplicate-calendar-list-items-sharepoint-2010
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to change default approval for ResourceAuthorizerApproval ?

Hi,
I'am new in OIM and I follow documentation where I found some predefined workflows. I'd like to use them.
Could you tell me, step by step, how to change default approval for ResourceAuthorizerApproval (only for my new defined resource).
I'm using OIM 11g and Design Console 11.1.1.3.0.2.0

Ok, I made new tamplate (copy of existing one), there I changed Template Level Approval Process and set allowed resources. It seems to be ok :)
If there are other solutions please share with me
Thanks
M.

How to prevent an error of [WIP work order ... is locked-]

Hello experts
Can someone tell me how to prevent an error which [The WIP work order associated with this transaction is currently locked and being updated by another user. Please wait for a few seconds and try again.Transaction processor error].
How can you prevent that error?
P.S.
Oracle support　told me [When you make data of mtl_transaction_interface, give same transaction_header_id to all data. Then, you kick worker with appointed transaction_header_id. Or, you set up being uncompatible with workers].
I cannot allow that making with same transaction_header_id and being uncompatible with worker on my system.

Hi santosh,
You can implement badi BBP_DOC_CHECK to check vendor email and issue error message.
Kind regards,
Yann

How to prevent PO changes in ME22N after Order acknowledgement?

Hi everyone,
        Can anyone tell me how to prevent PO changes (ANY) in ME22N after Order acknowledgement?
        I would like to make it possible without release strategy process or authorizations.
        Do you know some User Exit or Customazing way?
Regards.
Jaime S.

Dear Jaime S,
You can do this by restricting in authorization SHDO and also by marking "changes not possible after release" in Release strategy procedure.
And also you can navigate the menu to, SPRO------>IMG------>Material Management--->Purchasing(OLME)------->Purchase Order---->Define screen Layouts at Document Level---->And go to ME22n And Select the right parameter and in this you can make it display, optional or required entry for the fields.
Regards,
Manjunath B L

How to prevent error message for material description in MDG material detail screen, when user click on check action

Dear Experts,
I have a requirement for making material description as non mandetory in change request view of mdg material screen.
I have done that using field usage in get data method of feeder classes, but still message is displaying.
This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
How to prevent error message for material description in MDG material detail screen, when user click on check action.
Thanks
Sukumar

Hello Sukumar
In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
Regards, Ingo Bruß

How to prevent a solaris user to telnet from multiple computers

Hello,
How to prevent Solaris users to telnet from multiple computers? They should be able to telnet from only one PC.
Please help..

ora_tech have a good point, i was about to suggest ipfilter, which is a built-in-firewall in Solaris, but using tcp wrappers would probably be easier. It all depends on which level of security you want (blocking the telnet requests in a firewall would generally be safer than blocking them at the tcp wrapper level, since its prevents some processing).
Since Solaris 10 you can also easily enable tcp wrappers on the inetd services with inetadm, see:
http://blogs.sun.com/gbrunett/entry/tcp_wrappers_on_solaris_10
.. for more details..
.7/M.

How to prevent iTunes for Windows from "Updating iTunes Library"? (Library is on a NAS and managed by iTunes for Mac. Now getting update wars between Mac and Windows versions of the player.

How to prevent iTunes for Windows from "Updating iTunes Library"?
My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
Thanks for any help/suggestions.

Connect the PC to the library on the NAS. Wait while "updated".
Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
Close iTunes on the PC. Do not open iTunes on the Mac.
Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
Open iTunes on the Mac. It will update again, but that should be last time.
tt2

How to prevent others use their iDevices to remote control apple tv?

Hi All,
I'm wondering that does anyone know how to prevent others use their iDevices to remote control my apple tv?
settings
1. the apple tv is in the school.
2. all students could access the Internet
3. The apple tv is sharing the same Internet with students.

Welcome to the Apple Community.
The remote app uses homesharing, therefore anyone wanting to control an Apple TV with the remote app would need to know the home sharing ID and password.

How to prevent apps from syncing in the new version of itunes?

Hey there.
I brang my macbook to Applestore cause it had a problem and they downloaded the latest version of itunes. Everything's fine and my music, videos and apps are in the new itunes like before. But now, when I want to sync my iphone, a pop window asks me to give the password of the itunes account I used to download some of my apps or it will delete them and their data. The problem is that one of these accounts is an old friend's one and I actually lost all contact with him. So basically now I can't sync my iphone at all or it will delete all my apps.
Has anyone any idea how to sort that out? Or at least knows how to prevent apps from syncing in this new version of itunes?
Thanks for your help

Onthe top menu
View > Show Status Bar.
The grey bar will now appear at the bottom with the info you want

How to prevent a text in script from displaying if its value is zero

Dear all,
How to prevent a text in script from displaying if its value is zero
for eg   Price = 0.00
if price is 0 it should'nt appear in output.
I tried with    if price ne 0.
                   price = &price&
                    endif.
but it's not working.
Regards
Raj
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jan 20, 2009 8:59 AM

Hello Nagaraju,
                       What you were doing is partially right.
The correct format to write in the script is as follows :
/: if &PRICE& ne 0.
&PRICE&
/: endif.
This should work. Let me know how it goes.
Nayan

How to prevent JaxB creation of 2 Interfaces for each Element?

hi,
does any body know how to prevent JaxB creation of 2 Interfaces for each Element (The Content Interface and the element interface)?
I want to configure JaxB to use only one Interface and only one implementation Class.
Thank's,

I am sorry I can not answer your question, I have got the same problem. Could you please email me to
[email protected] when you know the answer, please.
I have a question for you. When and complex type is validated, I get the object which contains the error. ( or objects ).
However. How do know the position in the actual parent object. basically. Is there a way to know exactly the position of that attribute in that object. I need to store errors strings.
The first problem derives from this one:
It is not possible to execute validate function for a primitive attribute inside an structure.
I would appreciate your help.
Thanks.
Gustavo.

How to prevent incorrect approval of a trip

Similar Messages

Maybe you are looking for