How to prevent MIGO when source inspection lot is either open or rejected.

Hi
How to prevent doiMIGO when source inspection lot for the vendor/material is open or the source inspection lot is rejected.

Hi Sudhar,
Please find the process steps for your question :
How to prevent MIGO when source inspection lot is rejected
Go to Q-info record (QI02) for that particular material, vendor and Plant combination.
1.Use Inspection Type 0130 for source inspection.
2.Number of days ahead of lot to be created.
3.Through transaction code QI07 run the manual program to create a lot.This source Inspection may be rejected as in your case.
4.Control key contains the control on GR in the QM view of MM.
In the spro>QM>QM in Procurement-->Define Control Key and assign it to MM.
We can define here under Source Inspection Control that in case of GR for rejection-->GR not allowed.
This will prevent MIGO if in case Source Inspection Lot is rejected.
Thanks,
Ravi.

Similar Messages

Source inspection lot after PO release

This is regarding source inspection, i think in standard sap, source inspection lot can be trigger as soon as P.O. is created.
But in our scenario, every P.O. will be released by Purchase manager and sometimes he may not release.
My requirement is like inspection lot should trigger only when P.O. is releases.
Is this possible please advice.

The creation of the source inspection lots are based on the expected delivery date. They are not created when the PO is created or released.
See this SAP help for manually creating the source inspection. This same program is usually set up in most clients to run as a batch job on a regular basis. The parameters given the program determine how far in advance the source inspection lots are created. (QI07, QA51,QA52) QM>Quality Inspection>Worklist>Inspection Lot Creation>Source inspection
http://help.sap.com/saphelp_46c/helpdata/en/0f/adfab1354d11d4b2ea0050da4ceab0/content.htm
You may need to create several variants for the batch job and run multiple steps to the job. This allows you to set up certain materials and/or vendors with different opening periods and delivery dates dependent on the specific material.
It sounds like whom ever set your batch job up for this set the job up with very wide open parameters so virtually every PO created gets the source inspection lot created almost right away. You might improve your problem by just adjusting the parameters used in the batch job.
It would also probably not be hard to copy this program and have a programmer modifiy it so that only PO's with a release status are considered.
Of course it would probably be better to train the purchasing agents/manager to actually delete the PO's in a timely fashion when they don't intend to use them. It would keep the system cleaner and help out MRP.
FF

Settings for source inspection lot

Hi,
Can any one explain how do you set source Inspection?
Regards
vikram raghuwanshi

Hi,
Do following settings:-
Go to Q-info record (QI02)
1. source inspection type 010
2. Number of days ahead of lot to be created.
3. Tick the check box u201Csource Inspection No GRu201D in the quality info record.
4. Through transaction code QI07 run the manual program to create a lot.
5. Control key contains the control on GR if source inspection lot is rejected.
Regards
Nikhilesh Ray

Possibility of Stock posting when the inspection lot is in created status?

Dear,
Is it possible to do stock posting when the inspection lot is in created status?
Please help. Yor suggestion will be appriciated.
Regards
Vivek Deshpande

hi
In standard the creation status wont allow to post the material ,another way is change the system status CRTD in BS22 and allow inventory posting( i haven't checked)
regards
thyagarajan

Source Inspection lot cancellation

Hi,
I wanted to know, whether existing source inspection lot (with status Qualification Model) can be cancelled (LTCA) by carrying out reversal of the GRN (movement type 102) ?
Background : Material is having both inspection type (01 and 0101) active in materail master. Q-info record exists with profile 0001 (Supplier Relationship).
Thanks

Source Inspection lot is created after PO is released.So canceling original GRN will not cancel the source Inspection lot...
Can you explain what is exact requirement ??

No inspection lot can be opened for this material and vendor -QA228

Hi every one !
Iam getting Error while doing Migo -"No inspection lot can be opened for this material and vendor-QA228"
we analyze the issue asfollow -
1.checked Quality Lot-Available
2.Quality info record- Availble
3. Quality plan is exist.
But stil throwing above Error.

Hi,
Check the below threads,
[No inspection lot can be opened for this material and vendor;
[No inspection lot can be opened for this material and vendor;

No inspection lot can be opened for this material and vendor

dear sir
i m facing this error while doing gr. also how to confirm certificate
plz guide me
No inspection lot can be opened for this material and vendor

Sujit/Raj
I got th similar error. I closed the issue as Raj said because there was an open inspection lot. Im still nto able to figure out the background or root cause for thi.
The QIno record doe not have release Qty active and release date is 12/31/9999. Then why we have to close the previous inspection lot before recieving another. It seems like there is a condition or something that tells Inspection are to be done in stages and hence previous or pending inspection lot needs to be closed. But where i this condition coming from, where should i check.
I created PO and performed GR. I noticed if i perform GR and if the Inpection lot has status REL SPCO SPRQ IRCH then this happens. If the status is just REL SPCO SPRQ then I'm able to do multiple reciepts and this error does not show up.
Any idea or suggestions?

No inspection lot can be opened for this material error is coming during GR

dear friends,
no inspection lot can be opened for this material error is coming during GR. what is the cause for this and how to solve it. please suggest me
regards,
Krishna

Hi,
i think you have maintained the quality view and activated the inspection. but you have not created any inspection lot task list for the material and plant. thsi you can create through QP01 there maintain the material and plant. then enter in inspection plan give usage 5 and status 4. save it and try to check it with QA32 and see the lot. it should be released then only you can give usage decision.
regards,
Adwait Bachuwar

Source inspection lot

I made a settings in job planning for source inspection to create inspection lot.
But when PO is released, it is creating 4 inspection lots for the same PO., please advice what i went wrong.

How about schedule delivery?
Delivery split into 4 times?

How to prevent vis consisting of a lot of subvis

hi all,
I need your suggestions about preventing the confliction of working with two PC on the same vi. I built a program and it has a lot of subvis and I have to work with 2 PC. When I detect an error on a subvi or anything else I have to change the subvis and releated things in the same PC by transfering all subvis and vis folder by USB stick. sometimes this causes some error. for instance I could delete some subvis unconsciously. I read about labview project and libraries but any documents are not explanatory. I want to collect all my vis and subvis in a one folder or project. but I really do not know how to do it. And also I want to change subvis or vis in this folder whenever I want. How can I deal with this? Thanks in advance.
Regards.
Egemen
Solved!
Go to Solution.

TiTou wrote:
Create a new empty project, save it neer your main VI then the main VI to the project. The project will automatically find all the dependencies of your main VI (subVIs, CTLs, etc...), in the project windows you have a "Files" tab, from here you have a tree that shows you where are all the dependencies of your project. this is really helpfull.
If you go back to the "Items" tab, and create a new build sepcification (right clic on the icon) then chose "new >> Source Distribution" you can define an "export" that will include all you source code.
Hope this helps
Thank you TiTou, thank you so much. I learnt how to start to use it. when I add the folder (snapshot) that includes my main vi I can see all subvis and others under the dependencies section in the project. I saved this project. If I transfered thsi project to another PC, would my main main vi work properply without any confliction? I asked because the PC that is intended to be transfered this project does not include subvis under the ... LabVIEW 2009\user.lib and \ vi.lib. And also when I changed any subvi in this project, will subvis change under the LabVIEW 2009\user.lib\SubVIs in the main PC? Thank you very much again. One more question, when I transfer all my vis and subvis to the other PC, carrying this labview project to the other PC is enough?
Egemen

How to prevent duplicates when syncing

Whenever I sync anything to my iPad, iPhone I constantly get duplicated. This includes contacts, tasks & notebooks. How can I prevent this from happening?

If you have an email account that syncs over the air, you can get duplicates when syncing if you have these selections checked to sync with iTunes. Go to the Info Tab in iTunes when the device is connected to your computer and you are ready to sync - and look at what you have checked to sync. Look at Contacts, Calendars,and Other.

How to prevent email when using find my iphone

Hi there,
Am I the only that finds the email confirmations annoying when using find my iPhone?
Is there any way to prevent these emails, or a preference somewhere to turn them off?

Apple:
Considering the threads here and on other Internet sites, this is clearly a safety issue. As a parent who uses this feature on my children's phone - this feature should be optional. Notifying the bad guy when you are searching for your phone/child is not an option. Thank you.

How to prevent this: When I have an RDP connection to server and it is idle then I come back to it, it looks like I got kicked out but I'm not

Hi,
I have this situation: Say that I am RDP to a Windows server 2008 at least. I noticed that when I have an RDP session and I stopped working (idle) but still logged in, then I come back to it, the RDP session goes away as if I just got kicked out.
However, when I logged in again, I'm back to my session.
I looked at my GPO and I don't have anything set that relates to Terminal Session.
What is it and how do I fix this so I don't get kicked out?

Yes, set it to 1. You do not want to set it to 15 minutes or longer because that will most likely not fix the issue you are seeing. NAT Firewall timeouts are the most frequent cause of this issue,
and they are often set to 10-15-20 minutes by default.
I forget exactly, but I think in practice it will actually be 5 minute intervals when it is set to 1. The reason I said what I did is I didn't want to tell you it means minutes (which is what it means) and then you test it and realize that it is not
sending the keep alives at 1 minute intervals. If I remember correctly you can get lower by setting it to other intervals, for example, setting it to 2 would actually be more frequent than setting it to 1, but because I have noticed it stop working when
using the other intervals I recommend you set it to 1, which is the default.
Additionally, the exact behavior of the keep-alive may vary depending on the precise version, service pack, hotfixes that you are running.
The above is the longer explanation. Again I recommend you enable it and leave it at default of 1 and make sure to restart your server so the change takes effect.
-TP

How To Prevent Hum When Recording Spoken Voice

Hi,
I'm recording some audio files with mostly spoken voice but when listening to playback there is hum.
I'm using a USB Logitech headset/mic (pretty new, the one with the volume control on the cable). The level is set to half.
I'm also using Motu Firewire 828 Mark II as part of my studio set-up.
So in Logic Pro Preferences - Audio I set the device to Logitech Headset, then do my voice over recording which sounds fine balance wise in the head set.
When I change the device back to Motu 828 in the preferences and play the recording back over my speaker system, there is hum behind the voice.
Can anybody tell me how to get rid of this hum?
Any advice will be much appreciated.
George B
Message was edited by: music4all

music4all wrote:
Hi,
I'm recording some audio files with mostly spoken voice but when listening to playback there is hum.
I'm using a USB Logitech headset/mic (pretty new, the one with the volume control on the cable). The level is set to half.
I'm also using Motu Firewire 828 Mark II as part of my studio set-up.
So in Logic Pro Preferences - Audio I set the device to Logitech Headset, then do my voice over recording which sounds fine balance wise in the head set.
And there is no hum here?
When I change the device back to Motu 828 in the preferences and play the recording back over my speaker system, there is hum behind the voice.
And if you play it back over the headset, there is no hum? What is the resolution of the Logitech? 16 bits 32 kHz? 16/44,1? 16/48?
Can anybody tell me how to get rid of this hum?
IF it is in the recording already, yes:
It is probably a 50 or 60 Hz hum.
You need to apply strong, narrow eq. Insert a *Channel EQ* and start with finding the base frequency. Pull the filter down and sweep the frequencies between 0 and 200 to find the base hum, then set it up something like this:
regards, Erik.

How to Prevent Workflow when Automatic PO created in 3rd Party Sales

Hello,
We have set up a special Sales Document Type for the purpose of 3rd party sales. The item category is TAS, so the Purchase requisition gets created automatically.
The problem is that when the Sales Order is saved, it starts a Business Workflow and sends an email to our EDI Technical Team. We want to disable the workflow functionality in this sales document because it is not needed.
Is there a way to disable ALE for a sales document type?
Thanks very much!

Hi,
Please review the following notes for more information:
550388 FAQ: Customizing of third-party and individual Pos
210997 Accnt assignmt categoriesin third-party and indiv.P
On creating Purchase order for requirement created for a customer sales order stock, if the customer sales order stock is not valuated, this means a Consumption ( GBB ) account is involved here. If the posting is a consumption account, SAP allows the user to decide whether it should be autotmatically or manually entered. Because of this option, system need this account to be set with Field 'Automatic posting only' to ' '.
With this field 'Automatic posting only' setting to ' ', whether the account can be automatically or manually entered is then controlled by the field status in the PO creation. If you do not want the user to enter the account manually, then this account should be set to display mode in PO.
If the customer sales order stock is valuated, then in General business process, this would involve a BSX ( material account )
postings. Normally this is automatically derived during PO creations. No manual enterring is allowed. Thus if it is correct to set this account with field Automatic posting only' setting to 'X' in FI settings.
Please read the note 37563.
Please check if note 842977 is present in your system.
regards
Waman

How to prevent MIGO when source inspection lot is either open or rejected.

Similar Messages

Maybe you are looking for