How to prevent PowerPoint 2013 from mucking with my laptop display mode?

I have an EliteBook 8570p in a docking station, with an external monitor and keyboard attached.
I typically have my display mode as "duplicate", with the same thing showing on both my laptop screen and external monitor. I use the external monitor as the main screen. This might be uncommon, but I prefer it this way. I've
been working this way for quite a while.
I very recently started using MS PowerPoint 2013. Today I discovered an annoying bug (feature?) with this combination. I was in "slideshow mode" for a pptx I was working on, and I pressed ESC to get back to editing the doc. What
happened was that the external monitor just showed my background wallpaper, and the laptop screen showed the normal display, along with my background wallpaper. I then had to slide over to my laptop keyboard and press Fn-F4 and set it to "Duplicate",
and that restored my external monitor display.
I don't like this behavior. I also noticed that when I go into slideshow mode, the display on the laptop screen is different from what I see on the external monitor. It looks like it's showing an "intelligent" view of the slideshow, with
a big panel showing the current page, and the next page in a smaller panel. That's interesting, but I don't want it to do that if I'm in "Duplicate" display mode.
Is there a way to get the "older" behavior from PowerPoint 2013?

Thanks Milan for the explanation.
And the mentioned option can be found by going to the "SLID SHOW" tab>"Monitors" section on the ribbon in PowerPoint 2013.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

How to get real value from selectOneChoice with javascript?

Hi,
How to get real value from selectOneChoice with javascript? The event.getNewValue() only gets me the index of the selected item, not the value/title.
JSF page:
<af:resource type="javascript">
function parseAddress(event)
alert("new value: " + event.getNewValue());
</af:resource>
<af:selectOneChoice label="Location:" value="" id="soc4">
<af:clientListener type="valueChange" method="parseAddress" />
<f:selectItems value="#{Person.locations}" id="si7"/>
</af:selectOneChoice>
HTML :
<option title="225 Broadway, New York, NY-10007" selected="" value="0">225 Broadway (Central Office)</option>
<option title="90 Mark St., New York, NY-10007" value="1">90 Mark St. (Central Office)</option>
Thanks a lot.

Something I was missing ,
You need to add valuePassThru="true" in your <af:selectOneChoice component. I have personally tested it and got the actual value in alert box. I hope this time you got the real solution. You can also test the following code by your end.
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:form id="f1">
<af:panelBox text="PanelBox1" id="pb1">
<af:selectOneChoice label="Set Log Level" id="soc1"
value="#{SelectManagedBean.loggerDefault}"
valuePassThru="true">
<af:selectItem label="select one" value="First" id="s6"/>
<af:selectItem label="select two" value="Second" id="s56"/>
<af:clientListener method="setLogLevel" type="valueChange"/>
</af:selectOneChoice>
<af:resource type="javascript">
function setLogLevel(evt) {
var selectOneChoice = evt.getSource();
var logLevel = selectOneChoice.getSubmittedValue();
// var logLevelObject = AdfLogger.NONE;
alert("new value is : " + logLevel);
//alert(evt.getSelection);
//alert(logLevelObject);
evt.cancel();
</af:resource>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

TS3276 On received mail, I delete sender's name, address, etc. then forward it. The forwarded mail has a duplicate of the original mail, show original sender's name, etc. How to prevent the duplicate from being sent?

How to prevent duplicate of orginal mail (with original sender's name, address) being "attached" when forwarded?

Maybe I am mis-understanding what you are seeing.
When I forward a message, the receiver will see the original mail (unless I edit it, such as removing any previous sender's information) and the length will be the same as the message was before forwarding except for the added line "Begin forwarded message" (again, unless I edit bits out), and there will be no attached copy of the original message.
So when you say in your reply above "The orginal email with the sender's name and address was also sent with my forwarded email." do you mean:
a) that it is still visible at the head of the text of the message (which I was saying does not happen for me because "after hitting delete, the previous sender's information disappears." [and since] "it has disappeared, it cannot be in your forwarded mail." Disappeared means it is not there.
b) another copy of the original message is attached to the forwarded email at the end, either as an included file or as repeated text.
c) some other situation.
Sorry about the previous mis-spellings! I hope that we can get to the bottom of this.

How to read appended objects from file with ObjectInputStream?

Hi to everyone. I'm new to Java so my question may look really stupid to most of you but I couldn't fined a solution by myself... I wanted to make an application, something like address book that is storing information about different people. So I decided to make a class that will hold the information for each person (for example: nickname, name, e-mail, web address and so on), then using the ObjectOutputStream the information will be save to a file. If I want to add a new record for a new person I'll simply append it to the already existing file. So far so good but soon I discovered that I can not read the appended objects using ObjectInputStream.
What I mean is that if I create new file and then in one session save several objects to it using ObjectOutputStream they all will be read with no problem by ObjectInputStream. But after that if in a new session I append new objects they won't be read. The ObjectInputStream will read the objects from the first session after that IOException will be generated and the reading will stop just before the appended objects from the second session.
The following is just a simple test it's not actual code from the program I was talking about. Instead of objects containing different kind of information I'm using only strings here. To use the program use as arguments in the console "w" to create new file followed by the file name and the strings you want save to the file (as objects). Example: "+w TestFile.obj Thats Just A Test+". Then to read it use "r" (for reading), followed by the file name. Example "+r TestFile.obj+". As a result you'll see that all the strings that are saved in the file can be successfully read back. Then do the same: "+w TestFile.obj Thats Second Test+" and then read again "+r TestFile.obj+". What will happen is that the strings only from the first sessions will be read and the ones from the second session will not.
I am sorry for making this that long but I couldn't explain it more simple. If someone can give me a solution I'll be happy to hear it! ^.^ I'll also be glad if someone propose different approach of the problem! Here is the code:
import java.io.*;
class Fio
     public static void main(String[] args)
          try
               if (args[0].equals("w"))
                    FileOutputStream fos = new FileOutputStream(args[1], true);
                    ObjectOutputStream oos = new ObjectOutputStream(fos);
                    for (int i = 2; i < args.length ; i++)
                         oos.writeObject(args);
                    fos.close();
               else if (args[0].equals("r"))
                    FileInputStream fis = new FileInputStream(args[1]);
                    ObjectInputStream ois = new ObjectInputStream(fis);
                    for (int i = 0; i < fis.available(); i++)
                         System.out.println((String)ois.readObject());
                    fis.close();
               else
                    System.out.println("Wrong args!");
          catch (IndexOutOfBoundsException exc)
               System.out.println("You must use \"w\" or \"r\" followed by the file name as args!");
          catch (IOException exc)
               System.out.println("I/O exception appeard!");
          catch (ClassNotFoundException exc)
               System.out.println("Can not find the needed class");

How to read appended objects from file with ObjectInputStream? The short answer is you can't.
The long answer is you can if you put some work into it. The general outline would be to create a file with a format that will allow the storage of multiple streams within it. If you use a RandomAccessFile, you can create a header containing the length. If you use streams, you'll have to use a block protocol. The reason for this is that I don't think ObjectInputStream is guaranteed to read the same number of bytes ObjectOutputStream writes to it (e.g., it could skip ending padding or such).
Next, you'll need to create an object that can return more InputStream objects, one per stream written to the file.
Not trivial, but that's how you'd do it.

How do you delete records from table with data in a select option

how do you delete records from table with relevant to data in a select option..how to write coding

Hi,
Try
if not s_select_option [ ] is initial.
delete * from table
where field in s_select_option.
endif.
commit work.
Be careful though. If select option is emty, you will delete the entire table.
Regards,
Arek

How to prevent a file from stripping?

I'm building vacation for Arch64 but should be the same for 32bit. PKGBUILD looks like this:
# $Id: PKGBUILD,v 1.1 2004/01/21 15:43:15 dale Exp $
# Maintainer: dale <[email protected]>
pkgname=vacation
pkgver=1.2.6.1
pkgrel=1
pkgdesc="an automatic mail-answering program"
depends=(gdbm)
url="http://www.tosn.org/projects/vacation/"
source=(http://www.tosn.org/projects/vacation/files/$pkgname-$pkgver.tar.gz vacation.patch)
build() {
cd $startdir/src/$pkgname
mkdir -p $startdir/pkg/usr/{bin,man/man1}
# keeps binary from building
rm -rf vacation
# fixing the Makefile - not only for arch64
sed -i -e 's: -m486::; s:CFLAGS.*= (.*):CFLAGS += 1:' $startdir/src/$pkgname/Makefile
sed -i -e "s:/usr/bin:$startdir/pkg/usr/bin:g" $startdir/src/$pkgname/Makefile
mv vacation.man vacation.1
make install
These file have been created:
[andyrtr@workstation64 vacation]$ ls -lRA pkg/
pkg/:
insgesamt 0
drwxr-xr-x 4 andyrtr users 96 2006-01-28 09:32 usr
pkg/usr:
insgesamt 0
drwxr-xr-x 2 andyrtr users 96 2006-01-28 09:32 bin
drwxr-xr-x 3 andyrtr users 72 2006-01-28 09:32 man
pkg/usr/bin:
insgesamt 24
-rwxr-xr-x 1 andyrtr users 16864 2006-01-28 09:32 vacation
-rw------- 1 andyrtr users 470 2006-01-28 09:32 vaclook
pkg/usr/man:
insgesamt 0
drwxr-xr-x 2 andyrtr users 48 2006-01-28 09:32 man1
pkg/usr/man/man1:
insgesamt 0
[andyrtr@workstation64 vacation]$
I get this error:
==> Starting build()...
gcc -march=x86-64 -O2 -pipe -Wall -Xlinker -warn-common -D_PATH_VACATION="/var/abs/extra/system/vacation/pkg/usr/bin/vacation" -o vacation vacation.c -lgdbm
install -s -m 755 vacation /var/abs/extra/system/vacation/pkg/usr/bin/vacation
install -s -m 755 vaclook /var/abs/extra/system/vacation/pkg/usr/bin/vaclook
strip: /var/abs/extra/system/vacation/pkg/usr/bin/vaclook: File format not recognized
install: strip fehlgeschlagen
make: *** [install] Fehler 1
==> ERROR: Build Failed. Aborting...
Krusader detects it as a Perl program. Any idea?
AndyRTR

Posted: Sat Jan 28, 2006 8:45 am Post subject: How to prevent a file from stripping?
I'm building vacation for Arch64 but should be the same for 32bit. PKGBUILD looks like this:
Code:
# $Id: PKGBUILD,v 1.1 2004/01/21 15:43:15 dale Exp $
# Maintainer: dale <[email protected]>
pkgname=vacation
pkgver=1.2.6.1
pkgrel=1
pkgdesc="an automatic mail-answering program"
depends=(gdbm)
url="http://www.tosn.org/projects/vacation/"
source=(http://www.tosn.org/projects/vacation/files/$pkgname-$pkgver.tar.gz vacation.patch)
build() {
cd $startdir/src/$pkgname
mkdir -p $startdir/pkg/usr/{bin,man/man1}
# keeps binary from building
rm -rf vacation
# fixing the Makefile - not only for arch64
sed -i -e 's: -m486::; s:CFLAGS.*= (.*):CFLAGS += 1:' $startdir/src/$pkgname/Makefile
sed -i -e "s:/usr/bin:$startdir/pkg/usr/bin:g" $startdir/src/$pkgname/Makefile
mv vacation.man vacation.1
make install
These file have been created:
Code:
[andyrtr@workstation64 vacation]$ ls -lRA pkg/
pkg/:
insgesamt 0
drwxr-xr-x 4 andyrtr users 96 2006-01-28 09:32 usr
pkg/usr:
insgesamt 0
drwxr-xr-x 2 andyrtr users 96 2006-01-28 09:32 bin
drwxr-xr-x 3 andyrtr users 72 2006-01-28 09:32 man
pkg/usr/bin:
insgesamt 24
-rwxr-xr-x 1 andyrtr users 16864 2006-01-28 09:32 vacation
-rw------- 1 andyrtr users 470 2006-01-28 09:32 vaclook
pkg/usr/man:
insgesamt 0
drwxr-xr-x 2 andyrtr users 48 2006-01-28 09:32 man1
pkg/usr/man/man1:
insgesamt 0
[andyrtr@workstation64 vacation]$
I get this error:
==> Starting build()...
gcc -march=x86-64 -O2 -pipe -Wall -Xlinker -warn-common -D_PATH_VACATION="/var/abs/extra/system/vacation/pkg/usr/bin/vacation" -o vacation vacation.c -lgdbm
install -s -m 755 vacation /var/abs/extra/system/vacation/pkg/usr/bin/vacation
install -s -m 755 vaclook /var/abs/extra/system/vacation/pkg/usr/bin/vaclook
strip: /var/abs/extra/system/vacation/pkg/usr/bin/vaclook: File format not recognized
install: strip fehlgeschlagen
make: *** [install] Fehler 1
==> ERROR: Build Failed. Aborting...
Looks like its tring to install to /var/abs/extra/system/vacation/pkg/usr/bin....... ????
try make DESTDIR=$startdir/pkg/usr install

How do you prevent the computer from shutting down when in sleep mode?

How do you prevent the computer from shutting down when in sleep mode and plugged in?

Thanks tjk.
Those are great suggestions and got me looking in places I had not considered before. Unfortunately, the problem remains. The System Preferences did not have the shut down option activated and there are no parental controls active on the computer.
Any other suggestions are welcome.
Brian

How to pass record Group from Forms with DATA_PARAMETER to Reports Server

How to pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
When we use products on run time we are using data_parameter for passing record Groups to reports via run_product but now we have to use application server and reports server for same reports.
We met with <FRM-41214 Unable to run reports> for passing DATA_PARAMETER to reports server when used RUN_REPORTS_OBJECT.
How can we pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
Thanks,
Arif

Hi Mandeep,
Could you please tell me how can i pass data parameter from forms to report through run_product.

How can I download images from website with Automator?

Hi!
I want to ask how can I download images from website with Automator like here http://www.youtube.com/watch?v=hQm7Xr9jY0w&t=85m15s (in 1:25:15).
I want to download these images to my downloads folder. Some things have changed and I can't find exact options as then. When I am trying to make it it shows "The action "Download URLs" was not supplied with the required data."
I am using 2012 late iMac with Mac OSX 9.2 (Mavericks).

There are two apps that I know of - and I would also swear that they come from the same developer, although they've different names. Both have free trials and both cost $40 (but both do 'other' video conversion as well).
One is WonderShare - I bought this one and it works very well for downloading YouTube videos as well as converting just about any file format you can think of.
The other is iSkysoft Video Converter (just noticed that it's now $36).
I tried them both and finally decided on WonderShare. Give them both a trial run and decide if you like either one enough to buy it. I don't know of any 'free' software that will allow you to download and convert YouTube videos, but perhaps someone else will come along and know of something...
Good luck,
Clinton

How can I download videos from youtube with may MacBook Pro? I cannot download with real player. So how can I do it?

How can I download videos from youtube with may MacBook Pro? I cannot download with real player. So how can I do it?

There are two apps that I know of - and I would also swear that they come from the same developer, although they've different names. Both have free trials and both cost $40 (but both do 'other' video conversion as well).
One is WonderShare - I bought this one and it works very well for downloading YouTube videos as well as converting just about any file format you can think of.
The other is iSkysoft Video Converter (just noticed that it's now $36).
I tried them both and finally decided on WonderShare. Give them both a trial run and decide if you like either one enough to buy it. I don't know of any 'free' software that will allow you to download and convert YouTube videos, but perhaps someone else will come along and know of something...
Good luck,
Clinton

How can I export photos from Aperture with a new sequence and ignore the embedded JPEG number? Have tried renumbering to no avail.

How can I export photos from APERTURE with a new sequence and ignore the embedded JPEG number? Have tried renumbering to no avail.
has anyone resolved this issue?
This is now the second big Problem with using Apple's Appeture with NO apparent FIX...
Aperture has NO DIRECT way to Burn to a CD/DVD & apparently NO way to RE-SEQUENCE the numbering system????
ANYONE... I wish APPLE would address/fix these 2 problems... LIGHTROOM I guess is next?

Hi David,
Coming in and whining loudly is rude. We are all volunteers here, voluntarily sharing our expertise so that users like you can make the most of their time with Aperture. Speaking just for myself: although I do care about your success with software (it's why I'm here), I don't care what software you use. If you want to use Lightroom, do so, and post your questions in an appropriate forum.
Burning files to a CD is a file operation done at the system level (it is built into OS X). Aperture lets your create sharable image-format files from your Images. You then use OS X's tools to burn those files to a CD. Iirc, you can set up a "Burn Folder" in Finder, into which you can export files created from your Images, and with a single click burn your CD.
Naming the files you create by exporting your Images can be tricky. There are _many_ possibilities. Some things can't be done. Sequencing can be done in a number of ways (see Léonie's answer above). What have you tried? What was the result? In what way did this differ from what you expected?
--Kirby.

HT1689 How do you keep pictures from reloading with every sync

How do you keep pictures from reloading with every sync

What do mean by reloading? Once you sync the photos to the iPad they should not sync again. Is that what you are seeing? The progress bar is showing that the photos are being transferred all over again?

How to revert back from external display mode to laptop display mode?

Hi, I'm new to this community. I'm not sure if this is where I should be posting my questions. Anyway, I accidentally pressed fn + f2, which switched my laptop into external display mode (I'm pretty sure), and the screen is now very narrow and small. I can't figure out how to switch it back to the laptop display mode. I tried fn + f3, which didn't do anything. I also tried the windows button + p, which wasn't the solution either (I was able to extend my desktop screen, but when I play my Steam games the screen is still very narrow and small). I'm very frustrated because I can't find any answers online. So any information would likely be helpful. Thanks in advance.
OS: Windows 8

Hi BorderingOnChaos,
Fn + F2 is a toggle. You press it again to switch back. If it doesn't work, then something is wrong with your notebook's SCM (system control manager) software or EC (embedded controller) firmware.
In the future, please do two things:
1 - Identify your notebook because the answer may vary depending on model.
2 - This question does not relate to the SteelSeries Engine. The correct place to ask it would be the general "Gaming Notebooks" forum if your MSI notebook is a gaming model. This "SteelSeries Engine" forum is a sub-forum under the "Gaming Notebooks" forum for the purpose of dealing with questions about it---but almost everybody new misses that. The SteelSeries Engine is used to configure keyboard macros and backlighting in MSI gaming notebooks that contain a SteelSeries keyboard as well as accessory devices from SteelSeries like gaming mice and USB headsets.
Kind regards, David

How to capture an image from my usb camera and display on my front panel

How to capture an image from my usb camera and display on my front panel

Install NI Vision Acquisition Software and NI IMAQ for USB and open an example.
Christian

How to prevent PowerPoint 2013 from mucking with my laptop display mode?

Similar Messages

Maybe you are looking for