How to prevent print head clog up and B200 Error ?

I just went through a horrid time getting rid of a B200 error due to the printer head clog up. I had to soak the head for at least one hour in a solution of warm water and a bit of oxy clean to get the printer to work again. I almost gave up and was at the point of buying a new printer .
My question is : How to prevent this from happening again especially during 2 to 3 week vacations when the printer is turned off?
Tks

Hi sportflyer,
There isn't a way to prevent a B200 error. If you do encounter the error again, it is recommended that you contact live technical support . There is NO charge for this call. Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

How to print header in first and last page only in SAPSCRIPT

Hi!
How to print header in first and last page only in SAPSCRIPT,
in between pages, I need to print all line items in MAIN window only .
Thanks in anticipation!
Aki.

Hi All,
Thanks for your early update...but my requirement here is
I have two pages (FIRST , NEXT ) First is having Header, Main and Footer
NEXT is having Main and Footer ..I am printing PO here..let us think that my PO is having 20lines items , let us assume that it takes five pages...
Now how application is printing is ..first set of data is printing in FIRST page and remainiang data distributed to 4 pages printing in NEXT page ..but what my requirement is , I need fifth page print on FIRST page, instead of NEXT page... Ultimately I need last set of data always print in FIRST ie out of 5 pages 1st print on FIRST 2nd 3rd 4th print on NEXT and 5th print again on FIRST .
hope you this will clear you.
Thanks!

How to prevent printing last print page in smartforms

Hi everyone,
when i print preview my samrtform, there is an extra blank page printing at end. for example, if i want to print 5 records, 6 print pages are printing. how to prevent printing this last page.
answers will be rewarded
thanks
chintu

Hi
Try out this
You need to Create --> Flow Logic --> Alternative process where you can
specify a condition that will either, Go to the last page or not
depending on the Conditions. You will need to set the General
Attributes --> Go to New Page check box and the name of the Page to go
to, as well as setting the Conditions as you have then to suppress the
data.
Regards
Pavan

How can I print with the black and white cartridge only?

I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
The printer is out of ink.
The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
How can I print with the black and white cartridge only?
Mac OSX 10.7.3
HP Photosmart C7280 (7200 series)
This question was solved.
View Solution.

I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!! I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
You should be ashamed!!

How do you print an email attachment and not the email itself. please.

how do you print an email attachment and not the email itself. please.
This question was solved.
View Solution.

Hi there, if there is text in the body of the email it will print automatically when sent to an ePrint email address. The only way to just have the attachment print is for there to be no text in the email body.
Hope that helps answer your question.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

How can i print the serial no: and total in smart form?

how can i print the serial no: and total in smart form?
i have two fields Quantity and Price; so i want to display the total for each item and
atlast the grand total. also the serial no: for each line item.
how it is possible?

Hi
You can do it by two ways
By making table node or by making simple loop node
ex
loop node
command line node
total = total + itab-quantity.
text node
&total&
Regards
Aditya

I lost my Iphone 5 today in Johor Bahru. Not install Find my Phone/Icloud/Offline. How to prevent others access my email and data ? Or how to remote lost mode/locking phone ?

I lost my Iphone 5 today in Johor Bahru. Not install Find my Phone/Icloud/Offline. How to prevent others access my email and data ? Or how to remote lost mode/locking phone ?

suyantosdf wrote:
I lost my Iphone 5 today in Johor Bahru. Not install Find my Phone/Icloud/Offline. How to prevent others access my email and data ? Or how to remote lost mode/locking phone ?
If you didn't enable find my iphone in icloud settings on your phone, then you can't do a lost mode or lock your phone.
I would assume you had a passcode on your phone to lock it. If you didn't then start changing your passwords.
Report the lost to your phone carrier - local authorities.

How to stop print head cleans?

I have a B110A printer. Each time I install new ink, turn on or wake up the printer from sleep, it spends over 5 minutes doing some sort of set up. Most of all, the installation of new ink gets reduced significantly before I do any printing. This is obviously the print heads working without my permission. Is there any way I can disable this? I only want to run print head cleans when I choose.

Hi @Doorway,
Welcome to the HP Forums!
I understand that you are wondering if the printhead cleaning can be disabled with your HP Photosmart Wireless B110A printer. I am happy to answer this for you!
Please see this guide, Ink Usage in Inkjet Printers, for more information.
This is a routine function of the printer, in order for the printheads not to be clogged. It cannot be disabled.
Hope this answers your question, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP 5150 - Win 7 - how clean/align print heads?

Existing HP 5150 is connected to new pc with Win 7 via its own on-board software. But how on earth do I clean and align the print heads? Hope someone can help. Many thanks. Strudel135

I am trying to do the same thing with a netbook running Windows 7 starter. My printer has stopped printing in black and would like to know the status of the cartridge.
There should be a utility out there that can tell a user how much ink is left in the cartridge and how to clean the inkjets.

How to clean print heads on hp 6830 series printer

A message appears on the printer screen saying "the printer heads need to be cleaned". I can't find anything on how to clean it.

Welcome to the HP Community , I came across your message about your Officejet 6830 showing "the printhead needs to be cleaned", and you are looking to clean them. I hope I can help! From the front of the printer, select Setup Menu, Printer Maintenance, Clean Printhead Best wishes to you!Show thanks for my reply to help you today by hitting the "thumbs up" icon below!

How to change printer head on HP Officejet PRO L7590

How do I change the printer heads on an HP Officejet PRO L7590

Hi there first43,
This article contains the steps for removing and replacing printheads. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How to clean print heads on HP4400

Does anybody know how you clean the print heads on the HP4400?

Welcome to the HP Community , I came across your message about your Officejet 6830 showing "the printhead needs to be cleaned", and you are looking to clean them. I hope I can help! From the front of the printer, select Setup Menu, Printer Maintenance, Clean Printhead Best wishes to you!Show thanks for my reply to help you today by hitting the "thumbs up" icon below!

How can I print a html table and preview it?

Hi there!
Please help me.
I spent a lot of time to find how to print a html table and preview it.
I tried use code of the book http://www.manning.com/sbe/ Chapter 22. But this book consists only code for rtf and they change size of JtextPane before printing.
I have found the bellow code;
http://forum.java.sun.com/thread.jsp?thread=120578&forum=57&message=316116 But I problems with printing.
I also found this code; http://forum.java.sun.com/thread.jsp?forum=31&thread=146439
But there is no code,so i don't understand.
Can u help me?
Thanks my friends.

There is the comp.lang.javacript newsgroup for one:
http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=utf-8&group=comp.lang.javascript
Here are a couple of more candidates I found from google in about two minutes:
http://www.jguru.com/forums/home.jsp?topic=JavaScript
http://www.jsworkshop.com/bb/viewforum.php?f=1&sid=524b20160ca47c0ab786214e2003f1d1
http://javascript.internet.com/forum/
I am sure there are many more. :)

Yellow printing green, print heads not cleaning and apparent leaking of cartridge

We have been having problems with the quality of the printing from our printer.
We noticed the colour was a bit off and ran a report, we found that the block of yellow that came out (where it tells you the estimated ink levels) was a dark green/grey colour.
We also noticed a black/grey tinge to the Magenta part.
There were also very thin lines on the Cyan section.
So we cleaned the print heads.
We did the whole three levels of cleaning and it didn't help at all.
After searching the net again, I found something where somebody had said their ink had leaked so I looked at the cartidges themselves (I didn't touch any part of the head!) and when I looked at the yellow one I found that yellow seemed to have leaked... but I couldn't see from where. It was only a small amount.
I found something on here that recommended making a block of yellow on Word and printing it out a few times to see if anything improved. I did this and the block of yellow not only came out dark green again, but on each page there were horizontal gaps and on each successive page the gaps were a lot wider.
I have just done a similr thing for yellow, magenta and cyan where I put a block of each colour on one page and printed it a few times.
The Yellow (at the top) is very nearly a solid dark green with a few darkish lines running through it.
The magenta has a few white horisontal lines passing through it.
The cyan has a few thick light blue horitonal lines passing through it with white lines inside of those light clue lines.
The reports show that the heads are aligned.
Is there a chance that the black is leaking somehow into the yellow? As that is the only colour that seemed to be changing. I've replaced the black ink, but I don't want to now also waste a yellow ink if it's not going to help.
Replacing the yellow ink will also not help with the problem of lines through the other colours.
Is there a way of cleaning the left over ink that may be hanging around inside the printer tubes?

Hi @lou1990lou,
Welcome to the HP Forums!
I understand that you are having a print quality issue with your HP Officejet 7610. I am sorry to hear this, but I am happy to help!
I would suggest to go through this print quality guide, Fixing Print Quality Problems for the HP Officejet 7610 Wide Format e-All-in-One Printer Series.
If the guide does not solve your problem, please call our phone support at 800-474-6836 to get your printer serviced. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Best of luck!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How do i print from my iphone and i pad to my officejet pro 8600

how do i print from my i phone and i pad. where do i find my email address for the printer

In order to AirPrint from your iPad/iPhone, here's all you need to do:
1. Make sure the printer and iPad/iPhone are connected to the same local network.
2. Open something you want to print (on the iPad/iPhone).
3. On the iPad/iPhone, tap the "Action" button (arrow curving out of a box).
4. Tap "Print".
If you run into any issue try the below steps:
1. Power off the printer.
2. Completely power off the iOS devices (hold the Sleep and Home buttons simultaneously until a message appears asking you to "Slide to power off". Slide across that bar, and it should completely power off).
3. Power the printer back on.
4. Power the iOS devices back on.
5. Try to print again.
Those steps usually resolve the issue. If they do not, try this additional steps:
6. Power cycle your router (usually done by unplugging the router’s power cord, waiting 20 seconds, and plugging it back in).
7. Make sure that the iOS devices and the printer are all connected to the same network, then try to print.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How to prevent print head clog up and B200 Error ?

Similar Messages

Maybe you are looking for