How to prevent "Shell Hardware Detection Service" from stopping automatically?

Long version:
I have an APC SmartUPS 750 (old one, w/o NIC) connected to my Win Server 2012 box via USB cable. My Server 2012 acts as a UPS web interface server (PowerChute software) that I can monitor via network.
Now, since Shell Hardware Detection Service stops automatically in Server 2012, the PowerChute software loses connectivity via USB to the UPS and I have to re-plug the USB cable every time for UPS to get detected.
Short version:
Anyway I can keep the Shell Hardware Detection Service to run even there is no one logged in?

Excerpt below taken from the following url:
http://technet.microsoft.com/en-us/library/hh831394.aspx
You can configure the Services row to display alerts when services are found in a role or server group that match startup types, service status, service names, and servers that you specify in the
Services Detail View dialog box.
After a server has been added to the Server Manager server pool, service alerts about the Shell Hardware Detection service can be displayed if there are no users logged on to the managed server. This occurs because the Shell Hardware Detection service runs
only when users are logged on to the managed server, or connected to a Remote Desktop session on the managed server. To avoid seeing Shell Hardware Detection service alerts for this case, click
Services in the thumbnails for server groups, including the
All Servers group. In the Services Detail View dialog box, on the
Services drop-down list, clear the check box for Shell Hardware Detection, and then click
OK.

Similar Messages

Auto-start services not running :Shell Hardware Detection in my Health Reports

Recently I've setup up Windows Server 2012 Essentials on my Custom-made Box. All is going well so far except that i have a warning in my generated Health Report such as
Auto-start Services Not Running Shell
Hardware Detection.
I had checked My Services and found out that this particular service is scheduled to start Automatically and it is always started...
Any Advice what might be the problem?

Susan, can you still see the Connect bug? What Product/Program is it under in Connect? I can't see it but I might not be a member of the correct group.
From http://technet.microsoft.com/en-us/library/hh831394.aspx:
"After a server has been added to the Server Manager server pool, service alerts about the Shell Hardware Detection service can be displayed if there are no users logged on to the managed server. This occurs because the Shell Hardware Detection service runs
only when users are logged on to the managed server, or connected to a Remote Desktop session on the managed server. To avoid seeing Shell Hardware Detection service alerts for this case, click
Services in the thumbnails for server groups, including the
All Servers group. In the Services Detail View dialog box, on the
Services drop-down list, clear the check box for Shell Hardware Detection, and then click
OK."
That confirms that it's okay for Shell Hardware Detection not to be running. However the suggested fix--removing it from 2012 alerting--does not keep it off my 2012E Health Report.
Mark Berry
MCB Systems

How to prevent a text in script from displaying if its value is zero

Dear all,
How to prevent a text in script from displaying if its value is zero
for eg   Price = 0.00
if price is 0 it should'nt appear in output.
I tried with    if price ne 0.
                   price = &price&
                    endif.
but it's not working.
Regards
Raj
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jan 20, 2009 8:59 AM

Hello Nagaraju,
                       What you were doing is partially right.
The correct format to write in the script is as follows :
/: if &PRICE& ne 0.
&PRICE&
/: endif.
This should work. Let me know how it goes.
Nayan

How to call an external web service from OIM?

Hi,
I have a question on how to call an external web service from OIM within e.g. creating user process? How should it be done; through adapter and task in the process?
Any recomendations?
Thanks in advance!

it is not clear to me if you are having problems with calling java code from OIM or if the problem is the web service API.
Lets do some divide and conquer:
Can you create a simple java class that just writes a couple of lines to the log? Please attach this code to the OIM task and make sure it runs.
Once this works we can start looking at the web service call.
Best regards
/Martin

How to send SMS ( Short Message Service ) from java code

Hi
How to send SMS ( Short Message Service ) from java code.
Thanks
Gaurav

Do you need to receive SMS? If you need to receive SMS, you will need to host your own GSM device or modem so that people can send you SMS.
If not, you can just use internet SMS gateways like clickatell as mentioned above will do the work, and post to them by HTTP, XML or email. The cost is about 6-8 cents per SMS. There are cheaper services, but not always reliable. If you need to host your own GSM device, you can use software like http://www.kannel.org (GPL Open Source) or http://www.visualgsm.com. Alternatively, you may obtain a shortcode from your Telco - but these come with monthly subscription of maybe one or two hundreds.
Regards,
Joshua
<SMS Gateway>@Expert

HT1338 trying to download mountain lion OS, but whenever the net connection is broken it restarts from zero, how to prevent this and start downloading from the point it was disconnected

trying to download mountain lion OS, but whenever the net connection is broken it restarts from zero, how to prevent this and start downloading from the point it was disconnected

Disable anti virus software and try turning off the Firewall in System Preferences > Security & Privacy > Firewall.
Quit then relaunch the App Store. From the menu bar click Store > Sign In
Then click Store > Check for Unfinished Downloads

How can I remove my credit card from the automatic billing for my account?

How can I remove my credit card from the automatic billing for my account?

The following has instructions for changing iTunes payment method: http://support.apple.com/kb/ht1918

Need Urgent Help... Essbase service is stopping automatically

Hello All,
In our production box essbase service is stopping automatically. Can you please help me to resolve this issue...
OS : Windows Server 2003
Hyperion : 11.1.1.3
SharedServices_Security_Client.log
2013-12-09 01:17:25,609 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2013-12-09 01:17:25,625 INFO [main] CSS Log file will be generated at F:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2013-12-09 01:17:25,625 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2013-12-09 01:17:25,625 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2013-12-09 01:17:25,672 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2013-12-09 01:17:28,390 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2013-12-09 01:17:29,062 INFO [main] Got hub location from Registry:http://servername:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2013-12-09 01:17:29,312 INFO [main] Got native directory location from Registry:servername:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2013-12-09 01:17:29,328 INFO [main] URL constructed out of values in Registry database:ldap://servername:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2013-12-09 01:17:29,578 ERROR [main] 80:6007:Failed to load SAP certificate from keystore at SAP.keystore. Ignore if SAP provider is not configured.[Root Cause: Invalid keystore format ] com.hyperion.css.SAPSecurity.loadSAPCertificate(Unknown Source)
ESSBASE.LOG
[Mon Dec 09 01:17:25 2013]Local/ESSBASE0///Info(1051283)
Retrieving License Information Please Wait...
[Mon Dec 09 01:17:25 2013]Local/ESSBASE0///Info(1051286)
License information retrieved.
[Mon Dec 09 01:17:29 2013]Local/ESSBASE0///Info(1051199)
Single Sign-On Initialization Succeeded !
[Mon Dec 09 01:17:29 2013]Local/ESSBASE0///Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
[Mon Dec 09 01:17:30 2013]Local/ESSBASE0///Error(1051429)
Essbase Product Existence Check Fails against the Shared Services Server with Error []
Thanks,
Prathap

Hi Prathap,
[Mon Dec 09 01:17:30 2013]Local/ESSBASE0///Error(1051429)
Essbase Product Existence Check Fails against the Shared Services Server with Error []
Above entries in Essbase.log tells that Essbase product entry was not found in Shared services.
As you rebooted the server, you might have lost domain server logs, but I think you can get more info about root cause in Essbase.log or essbase related log files only.
Regards,
Santy.

How Can I call a UCM service from SOAP request

Hi,
I have created one custom service and I would like to call that service from 3rd Party system via SOAP call. The 3rd Party system does not have the capability to call through RIDC.
Now I have exposed my service and tried to call but authentication exception was coming status code 401.
So I created one sample ADF application and tried to call the DocInfo service for testing (I thought let's try DocInfo then I will check my custom service). I downloaded the DocInfo service from UCM and uploaded the WSDL into the project and got the client DocInfoSoapClient.java file.
public class DocInfoSoapClient
@WebServiceRef
private static DocInfo docInfo;
public static void main(String [] args)
    docInfo = new DocInfo();
    DocInfoSoap docInfoSoap = docInfo.getDocInfoSoap();
    DocInfoByNameResult res = docInfoSoap.docInfoByName("TEST_001603", null);
    System.out.println(res.getContentInfo());
    // Add your code to call the desired methods.
The error is coming like:
Exception in thread "main" com.sun.xml.ws.client.ClientTransportAccessException: The server sent HTTP status code 401: Unauthorized: http://xxxxxxxx:16200/_dav/cs/idcplg
at com.sun.xml.ws.transport.http.client.HttpTransportPipe.getClientTransportException(HttpTransportPipe.java:340)
I tried a lot but same error. There should be some process by which I can send the userid and password but failed. Even I tried to send the properties as key value pair in IdcPropertyList but I know that is wrong.
I checked the Issue: https://community.oracle.com/thread/2424460
But there was no answer.
Can anyone help on it?
Regards,
Santanu

Hi Santanu,
You need to write SoapHandler in order to pass username and pwd. You will need 2 classes namely HeaderHandlerResolver & SoapHandler. This is how i do in in my JAX-WS clients. I generate stubs and then attach handler to webserviceinterface
PFA HeaderHandlerResolver.java and SoapHandler.java you would attach soap handler something like this in your code i have never done this via ADF so not sure.
HeaderHandlerResolver soapHandlerResolver = new HeaderHandlerResolver();
docInfo.setHandlerResolver(soapHandlerResolver);
In SoapHandler class you will mention username and pwd like this
soapMessageContext.put(BindingProvider.USERNAME_PROPERTY,"username");
soapMessageContext.put(BindingProvider.PASSWORD_PROPERTY,"pwd");
Regards,
Amol Gavali

How to expose a SOAP web service from HCP

Hello All,
Currently I am trying to create a SOAP web service within a HCP Java application to allow backend systems to consume data stored in HCP.
This is the planned scenario:
1. Create data in HCP - therefor I am using JPA and a oData Model.
2. Backend uses web service to consume data from HCP - with this point I do have some problems.. I do want to create a SOAP web service in order to achieve this.
Is there an easy way to create a SOAP web service in HCP? There are many tutorials in the internet of how to create a SOAP web service in 20 sec´s, but non of these helped me. I do was able to consume a SOAP web service in HCP coming from the ByD, but the other way around seems pretty complicated...
Can I make use of the Eclipse functions to create a web service? (New --> Other... --> Web Services --> Web Service and than choose the Button up Java bean Web Service type)
Have any of you some coding snippets that would probably help me out?
I have unsuccessfully tried to use the @WebService, @SOAPBinding, @WebMethod notation in my java classes...
Thank you,
Swen

Hello Nedelcho,
Yes. All the required jar files are in the lib directory.
Currently I am able to create a web service locally.
But when I deploy that to the cloud server my JPA service is not working any more.
Receiving the following error message:
<?xml version='1.0' encoding='UTF-8'?><error xmlns="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata"><code/><message xml:lang="en">javax.naming.NamingException: Error while attempting to resolve reference [Root exception is javax.naming.NamingException: Cannot create resource object instance due to exception in the object factory [Root exception is javax.naming.NamingException: Data source 'jdbc/DefaultDB' not available.]]</message></error>
The web.xml contains the following:
Any advice?
Best regards,
Swen

How to call a SAPME web service from MII

Dears,
How can I call a SAPME web service from MII such as PlaceFutureHold?
By using MII, I would like to develop some logic to check some values which query from SAPME database, if the value is out of spec, it needs to send a emal to inform user ans also hold the SFC.
Thanks!

Hi,
I can config the SAPME web service ItemServiceService
I used Config Links to assign values in request ItemByBasicDataQuery_sync, such as material, revision, site.
But get a almost empty response ItemByBasicDataResponse_sync, I wrote both web service request and response in file as below.
What did I missed? Thanks!
request:
<?xml version="1.0" encoding="UTF-8" ?>
- <ItemByBasicDataQuery_sync xmlns="http://sap.com/xi/ME">
- <ItemByBasicDataQuery>
<Item>MA1</Item>
<Revision>A</Revision>
- <SiteRef>
<Site>HP</Site>
</SiteRef>
</ItemByBasicDataQuery>
</ItemByBasicDataQuery_sync>
response:
<?xml version="1.0" encoding="UTF-8" ?>
- <ItemByBasicDataResponse_sync xmlns="http://sap.com/xi/ME">
- <Item>
<Item />
<Revision />
- <SiteRef>
<Site />
</SiteRef>
<ItemType>K</ItemType>
<IncrementBatchNumber>S</IncrementBatchNumber>
<LotSize>0.00</LotSize>
- <StatusRef>
<Status languageCode="" />
- <SiteRef>
<Site />
</SiteRef>
</StatusRef>
<EffectivityControl>R</EffectivityControl>
<Description languageCode="" />
<UnitOfMeasure languageCode="" />
<AssignSerialAtRelease>false</AssignSerialAtRelease>
- <AssyDataTypeRef>
<AssyDataType languageCode="" />
- <SiteRef>
<Site />
</SiteRef>
</AssyDataTypeRef>
- <InventoryAssyDataTypeRef>
<AssyDataType languageCode="" />
- <SiteRef>
<Site />
</SiteRef>
</InventoryAssyDataTypeRef>
- <RemovalAssyDataTypeRef>
<AssyDataType languageCode="" />
- <SiteRef>
<Site />
</SiteRef>
</RemovalAssyDataTypeRef>
<CreateTrackableSFC>I</CreateTrackableSFC>
- <BomRef>
<Bom />
<Revision />
<BomType>S</BomType>
- <SiteRef>
<Site />
</SiteRef>
</BomRef>
- <RouterRef>
- <SiteRef>
<Site />
</SiteRef>
<Router />
<Revision />
<RouterType>D</RouterType>
</RouterRef>
<CurrentRevision>true</CurrentRevision>
<DrawingName languageCode="" />
<EffectiveEndDate daylightSavingTimeIndicator="true" timeZoneCode="" />
<EffectiveEndSequence unitCode="">0.00</EffectiveEndSequence>
<EffectiveStartDate daylightSavingTimeIndicator="true" timeZoneCode="" />
<EffectiveStartSequence unitCode="">0.00</EffectiveStartSequence>
- <ItemGroupRef>
- <SiteRef>
<Site />
</SiteRef>
<ItemGroup languageCode="" />
</ItemGroupRef>
- <MaskGroupRef>
- <SiteRef>
<Site />
</SiteRef>
<MaskGroup languageCode="" />
</MaskGroupRef>
<MaximumUsage unitCode="">0.00</MaximumUsage>
<Panel>true</Panel>
<PreAssembled>true</PreAssembled>
<QuantityMultiplier>0.00</QuantityMultiplier>
<QuantityRestriction>W</QuantityRestriction>
- <SelectorActivityRef>
<Activity languageCode="" />
</SelectorActivityRef>
<SelectorNote languageCode="" />
- <TransferItemGroupRef>
- <SiteRef>
<Site />
</SiteRef>
<ItemGroup languageCode="" />
</TransferItemGroupRef>
<UseCompFromDrawing>true</UseCompFromDrawing>
<IsCollector>true</IsCollector>
<CollectParentSerial>true</CollectParentSerial>
<RequiresSerialNumberChange>true</RequiresSerialNumberChange>
- <DocumentLinkList>
- <DocumentLink>
- <DocumentRef>
- <SiteRef>
<Site />
</SiteRef>
<Document />
<ModifiedDateTime daylightSavingTimeIndicator="true" timeZoneCode="" />
<Revision />
</DocumentRef>
- <DocumentContext>
- <ItemRef>
<Item />
<Revision />
- <SiteRef>
<Site />
</SiteRef>
</ItemRef>
- <RouterRef>
- <SiteRef>
<Site />
</SiteRef>
<Router />
<Revision />
<RouterType>D</RouterType>
</RouterRef>
<OperationRef />
- <SiteRef>
<Site />
</SiteRef>
</DocumentContext>
<Sequence unitCode="">0.00</Sequence>
</DocumentLink>
</DocumentLinkList>
- <ItemLocationList>
- <ItemLocation>
<Location languageCode="" />
<Description languageCode="" />
<Sequence unitCode="">0.00</Sequence>
- <ItemRef>
<Item />
<Revision />
- <SiteRef>
<Site />
</SiteRef>
</ItemRef>
</ItemLocation>
</ItemLocationList>
- <ItemAlternateList>
- <ItemAlternate>
- <AlternateItemRef>
<Item />
<Revision />
- <SiteRef>
<Site />
</SiteRef>
</AlternateItemRef>
<Sequence unitCode="">0.00</Sequence>
<Substitute>true</Substitute>
- <ItemRef>
<Item />
<Revision />
- <SiteRef>
<Site />
</SiteRef>
</ItemRef>
- <ItemGroupRef>
- <SiteRef>
<Site />
</SiteRef>
<ItemGroup languageCode="" />
</ItemGroupRef>
<RequiredSubstitute>true</RequiredSubstitute>
<ValidAssembly languageCode="" />
<ValidEnd daylightSavingTimeIndicator="true" timeZoneCode="" />
<ValidRevision />
<ValidStart daylightSavingTimeIndicator="true" timeZoneCode="" />
</ItemAlternate>
</ItemAlternateList>
- <ItemDPMOList>
- <ItemDPMO>
<Opportunities unitCode="">0.00</Opportunities>
- <OperationRef>
- <SiteRef>
<Site />
</SiteRef>
<Operation />
<Revision />
</OperationRef>
<ForAllOperations>true</ForAllOperations>
<ForAllDpmoCategories>true</ForAllDpmoCategories>
- <DpmoCategoryRef>
- <SiteRef>
<Site />
</SiteRef>
<DpmoCategory>TERMINATION</DpmoCategory>
</DpmoCategoryRef>
- <ItemRef>
<Item />
<Revision />
- <SiteRef>
<Site />
</SiteRef>
</ItemRef>
</ItemDPMO>
</ItemDPMOList>
- <TransferDataList>
- <TransferData>
- <TransferParent>
<ShopOrderRef />
- <ItemGroupRef>
- <SiteRef>
<Site />
</SiteRef>
<ItemGroup languageCode="" />
</ItemGroupRef>
- <ItemRef>
<Item />
<Revision />
- <SiteRef>
<Site />
</SiteRef>
</ItemRef>
</TransferParent>
<TransferType>N</TransferType>
- <TransferSite>
<Site />
</TransferSite>
- <AlarmTypeConfigRef>
- <SiteRef>
<Site />
</SiteRef>
<AlarmType languageCode="" />
<TypeSpecific>true</TypeSpecific>
</AlarmTypeConfigRef>
<DefaultChoice>true</DefaultChoice>
- <ExportTemplateRef>
<TransferDataType>S</TransferDataType>
- <SiteRef>
<Site />
</SiteRef>
<TemplateName />
</ExportTemplateRef>
<ReceiveRequired>true</ReceiveRequired>
</TransferData>
</TransferDataList>
- <ItemShopOrderTypeList>
- <ItemShopOrderType>
- <ShopOrderTypeRef>
- <SiteRef>
<Site />
</SiteRef>
<OrderType />
</ShopOrderTypeRef>
- <RouterRef>
- <SiteRef>
<Site />
</SiteRef>
<Router />
<Revision />
<RouterType>D</RouterType>
</RouterRef>
- <ItemRef>
<Item />
<Revision />
- <SiteRef>
<Site />
</SiteRef>
</ItemRef>
</ItemShopOrderType>
</ItemShopOrderTypeList>
- <CustomFieldList>
- <CustomField>
<Attribute languageCode="" />
<Value languageCode="" />
<Description languageCode="" />
</CustomField>
</CustomFieldList>
<CreatedDateTime daylightSavingTimeIndicator="true" timeZoneCode="" />
<ModifiedDateTime daylightSavingTimeIndicator="true" timeZoneCode="" />
<HoldId unitCode="">0.00</HoldId>
<LastReleasedDate daylightSavingTimeIndicator="true" timeZoneCode="" />
- <OriginalStatusRef>
<Status languageCode="" />
- <SiteRef>
<Site />
</SiteRef>
</OriginalStatusRef>
</Item>
</ItemByBasicDataResponse_sync>

How can I call external web service from BPEL

1. I have "EmpService" webservice (simple webservice to get emp salary, not in BPEL domain) running in Oracle AS host1. If I want to call this web service from BPEL in another host2. How can I do this?
2. Is it a must to deploy this EmpService to Oracle BPEL domain in order to call it? If so, how can I deploy it. As many BPEL example tutorial demonstrate the "obant" command to deploy the BPEL process, but not show how to deploy a external web service not in BPEL project. Please help. ...

Create a partner link in BPEL and point it to the WSDL deployed on external server.
this thread will also help
Axis generated WS to Bpel WS

How to use WS-RM web Service from Session Bean?

Hi all.
Could you tell me the way how to call WS-RM web service(Staring BPM Process) from SessionBean?
Our environment: SAP NetWeaver CE 7.2 SP3
I do the following.
I have created a BPM Process starting with Message Start Event.
This Message Start Event was created by Service Interface(stateless and asynchronous) which was imported from ESR.
I deployed this into my server and it worked fine in webservice navigator as a WS-RM WebService.
But I can't call this webservice from SessionBean in EJBExplorer.
I get the following error message:
Caused by: This exception is wrapper of javax.xml.ws.soap.SOAPFaultException. com.sap.engine.services.webservices.espba
se.client.bindings.exceptions.SOAPFaultException: Invalid WS-RM message. There are no WS-RM headers within SOAP message.
at com.sap.engine.services.webservices.espbase.client.bindings.impl.JAXWSUtil.processFault(JAXWSUtil.java:412)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call_SOAP(SOAPTransportBinding.java:1366)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.callWOLogging(SOAPTransportBinding.java:960)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call(SOAPTransportBinding.java:915)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.WSInvocationHandler.processTransportBindingCall(WSInvocationHandler.java:168)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.WSInvocationHandler.invokeSEISyncMethod(WSInvocationHandler.java:121)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.WSInvocationHandler.invokeSEIMethod(WSInvocationHandler.java:84)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.WSInvocationHandler.invoke(WSInvocationHandler.java:65)
at $Proxy2753.zwsvCheckOrderdataMainprocessStart(Unknown Source)
at jp.co.ogis_ri.WSTestSessionBean.exeWS(WSTestSessionBean.java:81)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
I created this SessionBean as follows:
I created DCs for EJB and created SessionBean in EJB DC.
I imported a WSDL file(WS-RM web service) from Service Registory and
I created service clients and Service References.
After that I implemented SessionBean to call web service checking with this help.
http://help.sap.com/saphelp_nwce72/helpdata/en/44/4d2bb1c6b00597e10000000a155369/frameset.htm
After deploying this EJB,I configured properties in nwa.
Thanks
Yuichi

Yuichi
Did you manage to solve this? I'm doing something similar and seeing the same problem, although they're up to 7.3 SP7.
Any help greatly appreciated.
Lewis

How to generate doc/lit/wrapped services from existing wsdl?

Hello,
I am using workshop 10.1 to generate webservices from existing wsdl files from workshop 8.1. The existings webservices are based on an xmlbean utility project.
When I generate the webservice from the existing wsdl file it generates automatically services with doc/lit/bare operations. I found in the known issues that this combination is not supported in combination with xmlbeans.
See: CR283457
XBeans are not supported as parameters or return type for doc/lit/bare operations.
Use of Xbeans as a parameter or return type with doc/lit/bare bindings is not supported in operations or callbacks and will result in a failure during deployment.
Platform: All
Workaround: Use doc/lit/wrapped for services that use XBeans as parameters or return types.
The workaround state to use doc/lit/wrapped for services. My questions is how to do that since workshop has all control over the generation of the webservices? ?:|
Thanks in advance,
Martijn Baels
Software Architect
www.leanapps.com

Hi Martijn
If you do generate web service from the wsdl on a 9.2 project, it always uses jax-rpc types and there's no xmlbeans involved.
If the wsdl is in the schemas folder and the xmlbeans builder is on, then you also have xmlbeans types created by the builder they aren't being used by the web service. You will still have problems, because some of the xmlbeans types may conflict with the jax-rpc types.
so when we generate webservice from a wsdl it will never use xmlbeans type, even if the xml builder is on, because WLS doesn't support start from wsdl with xmlbeans types.
Can you please attach the wsdl and the steps so I can replicate and see the issue?
Thanks
Vimala

How to make a call to service from site studio templates?

Hi,
May be this is very basic but I am not able to figure out how to make a call to a service from site studio templates (hcsp). I have seen one example of service call in the dynamic list fragment. It makes a call to SS_GET_SEARCH_RESULTS service using executeService() method. But it doesn't take any parameters and also not very how returned results are captured.
I want to execute WCM_PLACEHOLDER service. It takes 2 main parameters dataFileDocName and templateDocName. The returned result is typically a html response.
The service typically is executed using http request and the url would be something like this
http://hd-pratapm/ucm/idcplg?IdcService=WCM_PLACEHOLDER&dataFileDocName=VIRTUSAINC&templateDocName=DETAILS_REGION_TEMPLATE
I think SS_GET_SEARCH_RESULTS service works in the similar fashion. I want to execute WCM_PLACEHOLDER service too using executeService() method. How to work with this? How can we pass parameters and capture returned results?
Regards,
Pratap

Hey Pratap,
If you are on a standard Site Studio template (page or subtemplate) you should be able to call the wcmPlaceholder idoc function directly. In fact calling the idoc function provides a lot more functionality then the service call (they locked down a few things in the service call since it is designed to be called from an external application).
The idoc call would look something like:  (taken from page 208 in this doc: http://download.oracle.com/docs/cd/E10316_01/SiteStudio/10gr4/Pdf/Site_Studio_10gR4_Designer_Guide.pdf)
As a general note when you are in idoc script and want to execute a service you call <$executeService()$> as you saw in the dynamic list. The parameters that the service runs on are in the data binder of the current request. To set parameters for an execute service you simply set idoc variables on the page before it. Example:


As for the response when you execute an idoc function, like wcmPlaceholder, that returns a String the response is immediately output to the page in the location you called the function. This would be similar in concept to a jsp scriptlet that outputs a string <%=myResponseString%>
Hope that helps,
Andy Weaver - Senior Software Consultant
Fishbowl Solutions < http://www.fishbowlsolutions.com?WT.mc_id=L_Oracle_Consulting_amw_OTN_ECM >
Edited by: Andy Weaver on Jul 7, 2010 7:59 AM
Added response detail.

How to prevent "Shell Hardware Detection Service" from stopping automatically?

Similar Messages

Maybe you are looking for