How to prevent voice over saying the calling number ?

i'm using voice over in my iphone 5s, when i receive a call, voice over autamatically say the calling number or name with the ring tone, how can i set voice over to prevent it saying the caller number or name ?

It appears to be working as Apple intended. The manual says:
Moving recordings to your computer
You can sync voice memos with the iTunes library on your computer, and listen to them on your
computer or sync them with another iPod touch or iPhone.
When you delete a synced voice memo from iTunes, it stays on the device where it was recorded,
but it’s deleted from any other iPod touch or iPhone you synced. If you delete a synced voice
memo on iPod touch, it’s copied back to iPod touch the next time you sync with iTunes, but you
can’t sync that copy back to iTunes a second time.
Sync voice memos with iTunes. Connect iPod touch to your computer. Then in iTunes, select
iPod touch. Select Music at the top of the screen, select Sync Music, select “Include voice memos,”
then click Apply.
Voice memos synced from iPod touch to your computer appear in the Music list and in the Voice
Memos playlist in iTunes. Voice memos synced from your computer appear in the Voice Memos
app on iPod touch (but not in the Music app).
What yo can do is code the Voice Memos on the computer as something besides Voice Memos (Right click>Select Get Info>go to Option tap and change under Media Kind). When yo change it it will move the VM to the library for that kind e.g., Music if you coded it as Music)

Similar Messages

  • How to prevent voice over saying the caller number or name automatically in iphone?

    hi, i'm a new member of apple world,
    i'm using voice over in my iphone 5s, when i receive a call, voice over automatically say the calling number or name with the ring tone, how can i set
    voice over to prevent it saying the caller number or name ??

    Same problem, which is extremely inconvenient because I like to use my earphones to listen to Pandora while I work. Not every time, but most of the time I plug in my earphones, the iPod software starts playing the last song that was played. Stopping the music via iPod or pressing the Home button for 10 seconds to force quit iPod doesn't stop the music as it will just automatically start playing again. Sometimes if I'm lucky, plugging the earphones in very quickly avoids this problem -- but like I said, it's a cross my fingers and hope I get lucky kind of thing.
    I'm using the newer 3G model, which I've had for only about a month. I did not have this problem with my old 2G iPhone.
    Someone in another thread said it's a hardware fault and suggested exchanging the phone for a new one. Can anyone confirm this?

  • HT1338 how do i get voice over say the last key pressed.

    A friend is blind.    He can hear e-mail but it would begood if he could hear the keyboard keys pressed.    Will voice over say the last key pressed.

    Hi David_MadjBright,
    Sorry for the delay in getting back to you. If you haven’t already got this sorted I’ll be happy to help. Drop me an email with the details. You’ll get the ‘contact us’ link in my profile.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Using Voice Over in the ios5 music app, when tapped into an album there is no way to back out of it except by switching off voice over! Help.

    Using Voice Over in the ios5 music app, when tapped into an album there is no way to back out of it except by switching off voice over! Help. This is preventing me upgrading the iPad2 to iOS5 for a blind man I work with. Am I missing something or is it a bug?

    here is a link to macosxhints.com that tells you how to output all of your feed URLs to a terminal window. from there you can cut and paste them into your new feed reader of choice...
    http://www.macosxhints.com/article.php?story=20080319094830396
    and if you are in the marked for a new reader may i suggest David Watanabe's excellent NewsFire. he had just recently made it totally free as a gift to the macintosh community.
    best of luck.

  • How does a voice gateway handle a call received from CUCM?

    For example, I have a voice gateway configured via a SIP trunk as a device in CUCM. When our users dial the international pattern (8011!) and CUCM forwards that to the device(gateway) over the SIP trunk, how does the gateway handle that request in terms of matching dial-peers? Is it handled the same way a call incoming from the PSTN would be? By matching the destination pattern?
    Ultimately what I'm trying to do is figure out whether our international calling is configured properly but that's difficult to do If I don't know what the gateway is doing with the call once it receives it from the CUCM.
    Thanks in advance!

    Thanks, we have a conference call Monday and I'll try some debugging to see what's going on. I am a little more confused now if that's possible because my understanding is that they can make INTL calls but based off of the configs I've seen and what you've told me they should be able to. Below are my configs. There is a translation profile applied but it points to a blank rule. I also didn't see any transformations in the route pattern.
    mgcp profile default
    dial-peer voice 1 pots
     incoming called-number .
     direct-inward-dial
     port 0/0/0:23
    dial-peer voice 100 voip
     incoming called-number .
     dtmf-relay rtp-nte
     codec g711ulaw
     ip qos dscp cs3 signaling
     no vad
    dial-peer voice 101 voip
     destination-pattern 5...
     session protocol sipv2
     session target ipv4:x.x.x.x
     dtmf-relay rtp-nte
     codec g711ulaw
     ip qos dscp cs3 signaling
     no vad
    dial-peer voice 2 pots
     destination-pattern 911
     port 0/0/0:23
     forward-digits all
    dial-peer voice 3 pots
     destination-pattern 9[94]11
     port 0/0/0:23
     forward-digits 3
    dial-peer voice 5 pots
     translation-profile outgoing NATL
     destination-pattern 9[2-9]......
     port 0/0/0:23
     forward-digits 7
    dial-peer voice 6 pots
     translation-profile outgoing NATL
     destination-pattern 9707[2-9]......
     port 0/0/0:23
    dial-peer voice 7 pots
     translation-profile outgoing NATL
     destination-pattern 91[2-9]..[2-9]......
     port 0/0/0:23
     forward-digits 11
    dial-peer voice 8 pots
     translation-profile outgoing INTL
     destination-pattern 9011T
     port 0/0/0:23
     prefix 011
    voice translation-rule 10
     rule 1 // // type any international plan any unknown

  • HT4889 Replacing System hard drive with a new one. How to get everything over to the new boot drive?

    Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
    I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
    Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try.  I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
    Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
    Thanks for any help!

    If you have a time machine back up of your current drive you can do this
    Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see  a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
    From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
    Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
    There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

  • I am trying  to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

    I am trying  to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

    CS3 is unsupported under Windows 8. That said, you'll need to contact Adobe
    directly for serial number issues.

  • I updated my Iphone4S this week to the newest IOS 7.1 and now everyone who calls me says the calls are not clear, muffled.  Is there something I can do to clear this?  4 people in 4 different states that called me all said the same thing.

    I updated my Iphone4S this week to the newest IOS 7.1 and now everyone who calls me says the calls are not clear, muffled.  Is there something I can do to clear this?  4 people in 4 different states that called me all said the same thing.

    Settings > General > Reset > Reset Network Settings
    Contact the carrier to troubleshoot.

  • HT1491 how do i change over from the american itunes store to the Australian store?

    How do i change over from the american itunes store to the Australian store? I was switched over when I was looking for something that was not available in the Australian store and now I cant get back.

    I have the same problem, anyone got an answer?

  • Refuses to play the voice over and the songs, doesnt even plays voiceovers which were allready placed its mute now

    refuses to play the voice over and the songs, doesnt even plays voiceovers which were allready placed its mute now  HELP PLEASE

    You'll find your answer here:
    https://discussions.apple.com/thread/2728092?start=0&tstart=0

  • I reset my phone and it now receives calls that were meant for my husband. I know how to fix this with messaging and facetime, but can't seem to find how to make it stop with the calls. Please help.

    I reset my phone and it now receives calls that were meant for my husband. I know how to fix this with messaging and facetime, but can't seem to find how to make it stop with the calls. Please help.

    It may be due to Continuity
    The following quote is from  Connect your iPhone, iPad, and iPod touch using Continuity
    Turn off iPhone cellular calls
    To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.

  • HT5622 How can I get on ICloud when it say the maximum number of free accounts has been activated on this iPad?

    How can I get on iCloud when it say the maximum number of free accounts has been activated on this IPad?

    A maximum of three new iCloud accounts can be created on a single iOS device. If you have already created three iCloud accounts (why?) then log in using one of those to start using it.
    Otherwise, you'll have to find another device to create an iCloud account on.

  • How to prevent B1 from populating the grid with components?

    Hello group,
    We have customized a form that pops up when user enters a parent item (of a template-type BOM) in the quotation grid.  The form displays the component items and lets the user mark which items to "paste" onto the quotation.  However, B1 automatically populates the grid with the component items once focus moves away from the item code column. 
    <b>How to prevent B1 from populating the grid with components <i>while</i> retaining the parent item in the item code column?</b>  I've tried trapping the Validate event, etc. with no success.

    Instead of setting the parent item up as a template type BOM, you could set up the list of parent/child items on a user table and use this user table to display the items in your pop-up screen.  As the parent item would no longer be a template BOM, Business One would no longer automatically popuplate the grid, and you could write your own code to add only the items selected in your pop-up screen into the grid.
    John.

  • What is the difference between Macs Voice Over and the text to talk feature

    what is the difference between Macs Voice Over and the text to talk feature

    Voice Over doesn't need someone to type in the text first. Voice Over works with specific screen displayed information so that a blind person can know where his/her cursor is or what is being displayed. Although it is an application of text to talk it's more than the text to talk feature.

  • Can Nokia 6233 say the Caller's Name?

    I have a friend who uses N80 and whenever someone calls her, her phone can say the caller's name. I wanted to know wether it works with my one, 6233, too, coz i think its a really cool feature and i love it. Or is it only possible for phones with symbian, like her one?

    So far only the newer symbian phones support this feature.

Maybe you are looking for

  • Vendor Text must be copied into PO texts.

    Hi Experts I assume that both "Purchasing Memo" and "Purchase Order Text" should be copied from the vendor master. When testing, only the "Purchase Order Text" is getting copied into the Purchase order. However i want the purchasing memo to also appe

  • How to generate an XML Document from XQuery

    The following query returns me the required XML output. However, I need to generate an XML Document out of it. How do I go about generating an XML Doc?. SELECT XMLQuery('<Data> {for $tert in ora:view("DATA"),            $tert_audit in ora:view("DATA_

  • Photoshop 7 crashing on startup...

    PS gets to the TWAIN things and crashes every time. It didn't used to do this and worked fine up until I think I upgraded to the latest system update. It has also trashed InDesign. I've reparied permissions,disgarded preferences, reinstalled PS, chec

  • Organizing Playlist, Will It Revert Back After Formating?

    I am in the process of organizing my playlist so that all the songs have a title, artist, etc. As you know when you upload the songs some are already ready others have all the info in title or whatever. My question is if I spend the hours to organize

  • InDesign and Acrobat Won't Print

    15" MacBook Pro running 10.4.11 --- CS3 I cannot print from InDesign or Acrobat. I can print from the other CS3 suite and from other programs. I have reinstalled both programs. I have tried printing to different printers via usb and wireless. I have