How to Prevent Windows 10 from Spying Full Guide
Easily make Windows 10 stop spying on you.
Easy to follow step by steps to secure your Windows 10 and prevent sensitive information leaking....
Read More
This topic first appeared in the Spiceworks Community
Team Folder in the past was managed by administrators. Administrator can create, edit, delete team folders. The team folder can be published to a group of users, including Active Directory group. It is very convenient to share files and folders with a group of users in the same team. As team groups bigger, it may not be convenient for administrator to manage all the team folders. So it makes sense for administrator to assign some users to be able to manage team folder that they own themselves. Role Manager It usually starts with the role manager by creating a role with Add/Edit/Delete permissions and assign it to users or Active Directory groups. Manage Team Folder The user who are in the private team folder role will be able to manage team folders without seeing all the team folders from everyone. Here is a YouTube Video about...
Similar Messages
-
How to install Windows 7 from a USB drive!
This is even easier than installing Windows XP from a USB drive, and will also reduce the time taken to install Windows 7, it took me about 15 minutes!
The advice in the guide is also applicable to installing Vista.
You need basically:
a USB flash drive at least 4GB in size
a Windows 7 DVD
To sum up:
Format your USB drive, with the NTFS filesystem
Open Command Prompt as an administrator, and run the Bootsect.exe program off the Windows 7 CD to make the USB drive bootable
Copy the contents of the Windows 7 DVD to the USB drive
Restart your PC, press F11 (or whichever key it is) to access the Boot menu, and select your USB drive to boot from
Full guide here:
http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/Quote from: bnborg on 16-February-11, 10:28:04
I have done this and it is simple.
I cleaned and (re)formated an 8GB flash drive under Windows7 using diskpart. I chose quick format and a fat filesystem. It doesn't need to be ntfs. I had diskpart mark the partition active. I copied the DVD contents to the flash drive. I also made a folder on it for motherboard drivers.
After that, I booted the drive on a new machine. Windows7 setup came up, and didn't find any hard drives, other than the USB flash drive. I clicked the button to load drivers, and pointed it to the folder I had copied them to on the flash. Windows installed without problems.
Hi bnborg..Do u mind sharing with me your motherboard driver folder? I have the MSI U135DX Netbook and each time I hit the button to install Windows 7 it asks me for some mobo driver...Think i might need it to get tru with a successful install.. -
Does anybody knows how to install Windows 7 from a USB drive on 2010 MacBook Air running Lion?
Does anybody knows how to install Windows 7 from a USB drive on 2010 MacBook Air running Lion?
Tell my wife that!
This is the best I can do. This way you can use the 2011 MBA way to do things.
Look for the post from @jacktourist. (on page 2 about half way down) This seems to be the easiest.
There are a couple of more similar to this with pictures I've seen around but can't remember where.
Here's another search with added info. It's easier then it sounds. -
Firefox 4 is preventing windows 7 from shutting down
When I am shutting my pc off and firefox 4 is running I get this"firefox 4 is preventing windows 7 from shutting down "
https://support.mozilla.com/en-US/kb/Firefox%20hangs <br />See '''hang-at-exit'''
-
How to acess windows share from Ipad ios 7
how to acess windows share from Ipad ios 7
Download an app from the AppStore that provides this functionality. Search for 'access Windows share' for some options.
-
How to prevent a file from stripping?
I'm building vacation for Arch64 but should be the same for 32bit. PKGBUILD looks like this:
# $Id: PKGBUILD,v 1.1 2004/01/21 15:43:15 dale Exp $
# Maintainer: dale <[email protected]>
pkgname=vacation
pkgver=1.2.6.1
pkgrel=1
pkgdesc="an automatic mail-answering program"
depends=(gdbm)
url="http://www.tosn.org/projects/vacation/"
source=(http://www.tosn.org/projects/vacation/files/$pkgname-$pkgver.tar.gz vacation.patch)
build() {
cd $startdir/src/$pkgname
mkdir -p $startdir/pkg/usr/{bin,man/man1}
# keeps binary from building
rm -rf vacation
# fixing the Makefile - not only for arch64
sed -i -e 's: -m486::; s:CFLAGS.*= (.*):CFLAGS += 1:' $startdir/src/$pkgname/Makefile
sed -i -e "s:/usr/bin:$startdir/pkg/usr/bin:g" $startdir/src/$pkgname/Makefile
mv vacation.man vacation.1
make install
These file have been created:
[andyrtr@workstation64 vacation]$ ls -lRA pkg/
pkg/:
insgesamt 0
drwxr-xr-x 4 andyrtr users 96 2006-01-28 09:32 usr
pkg/usr:
insgesamt 0
drwxr-xr-x 2 andyrtr users 96 2006-01-28 09:32 bin
drwxr-xr-x 3 andyrtr users 72 2006-01-28 09:32 man
pkg/usr/bin:
insgesamt 24
-rwxr-xr-x 1 andyrtr users 16864 2006-01-28 09:32 vacation
-rw------- 1 andyrtr users 470 2006-01-28 09:32 vaclook
pkg/usr/man:
insgesamt 0
drwxr-xr-x 2 andyrtr users 48 2006-01-28 09:32 man1
pkg/usr/man/man1:
insgesamt 0
[andyrtr@workstation64 vacation]$
I get this error:
==> Starting build()...
gcc -march=x86-64 -O2 -pipe -Wall -Xlinker -warn-common -D_PATH_VACATION="/var/abs/extra/system/vacation/pkg/usr/bin/vacation" -o vacation vacation.c -lgdbm
install -s -m 755 vacation /var/abs/extra/system/vacation/pkg/usr/bin/vacation
install -s -m 755 vaclook /var/abs/extra/system/vacation/pkg/usr/bin/vaclook
strip: /var/abs/extra/system/vacation/pkg/usr/bin/vaclook: File format not recognized
install: strip fehlgeschlagen
make: *** [install] Fehler 1
==> ERROR: Build Failed. Aborting...
Krusader detects it as a Perl program. Any idea?
AndyRTRPosted: Sat Jan 28, 2006 8:45 am Post subject: How to prevent a file from stripping?
I'm building vacation for Arch64 but should be the same for 32bit. PKGBUILD looks like this:
Code:
# $Id: PKGBUILD,v 1.1 2004/01/21 15:43:15 dale Exp $
# Maintainer: dale <[email protected]>
pkgname=vacation
pkgver=1.2.6.1
pkgrel=1
pkgdesc="an automatic mail-answering program"
depends=(gdbm)
url="http://www.tosn.org/projects/vacation/"
source=(http://www.tosn.org/projects/vacation/files/$pkgname-$pkgver.tar.gz vacation.patch)
build() {
cd $startdir/src/$pkgname
mkdir -p $startdir/pkg/usr/{bin,man/man1}
# keeps binary from building
rm -rf vacation
# fixing the Makefile - not only for arch64
sed -i -e 's: -m486::; s:CFLAGS.*= (.*):CFLAGS += 1:' $startdir/src/$pkgname/Makefile
sed -i -e "s:/usr/bin:$startdir/pkg/usr/bin:g" $startdir/src/$pkgname/Makefile
mv vacation.man vacation.1
make install
These file have been created:
Code:
[andyrtr@workstation64 vacation]$ ls -lRA pkg/
pkg/:
insgesamt 0
drwxr-xr-x 4 andyrtr users 96 2006-01-28 09:32 usr
pkg/usr:
insgesamt 0
drwxr-xr-x 2 andyrtr users 96 2006-01-28 09:32 bin
drwxr-xr-x 3 andyrtr users 72 2006-01-28 09:32 man
pkg/usr/bin:
insgesamt 24
-rwxr-xr-x 1 andyrtr users 16864 2006-01-28 09:32 vacation
-rw------- 1 andyrtr users 470 2006-01-28 09:32 vaclook
pkg/usr/man:
insgesamt 0
drwxr-xr-x 2 andyrtr users 48 2006-01-28 09:32 man1
pkg/usr/man/man1:
insgesamt 0
[andyrtr@workstation64 vacation]$
I get this error:
==> Starting build()...
gcc -march=x86-64 -O2 -pipe -Wall -Xlinker -warn-common -D_PATH_VACATION="/var/abs/extra/system/vacation/pkg/usr/bin/vacation" -o vacation vacation.c -lgdbm
install -s -m 755 vacation /var/abs/extra/system/vacation/pkg/usr/bin/vacation
install -s -m 755 vaclook /var/abs/extra/system/vacation/pkg/usr/bin/vaclook
strip: /var/abs/extra/system/vacation/pkg/usr/bin/vaclook: File format not recognized
install: strip fehlgeschlagen
make: *** [install] Fehler 1
==> ERROR: Build Failed. Aborting...
Looks like its tring to install to /var/abs/extra/system/vacation/pkg/usr/bin....... ????
try make DESTDIR=$startdir/pkg/usr install -
How to prevent window iconified
Hi!
I am wandering how to prevent window
iconified (this - button on the right-top-
corner on the window).
DO_NOTHING_ON_CLOSE works for X button,
any method to stop iconify!
nullYou can use the JFrame method "public void processWindowEvent(WindowEvent e)" and when the WindowEvent ID is WINDOW_ICONIFIED, WINDOW_CLOSING or WINDOW_DEACTIVATING or some other event type that you're interested in, you can set the window visible again. Be careful though, if you don't program a way out of this the window will always be on top and you won't be able to perform any other window functions.
Hope this helps.
Steve -
How can I pass data from a form guide to another form in a business process
How do we pass data from a form guide to another form(not necessarily a guide) without having to open the form. For example we have a small form guide to capture the contract id so we can then get data from contracts table to present to the user in a form. We want the user to open the guide (either Flex guide or form guide) to enter the contract id. Upon submission we want the process to get the contract data and put it into the form that will be opened at the next step by the user without having a user interact with the form to get the data into it. In other words we need the process to get the data and populate a different form than the form guide the contract id was entered in and this new form needs to be opened in the next step by the user.
Firstly, I'm assuming that you have a Forms ES Server if you are rendering a Guide. This could be either version ES1, ES2/2.5 or ES3/ADEP
If you submit the form back to the server, you can populate a second (PDF/XDP) form with the data bound to the same schema/Data Model using Forms ES.
You referred to the next user in the chain - If you are using Process Management, this is very easy, as you define what form is used to render the data in the "Presentation & Data" section of the Assign Task activity -
Prevent Ctrl-W from closing Full Acrobat Search window
When I do a Full Acorbat Search on a folder tree, it can take quite some time for all the hits to be found, and quite some time to work through the hits. Usually, multiple PDF files are opened as I work through the hits. As I close the PDFs with ctrl-W, it is very easy to accidentally close the Full Acrobat Search window, which means waiting forever to re-do the search and find my way to my current spot in the list of hits. I find it highly inappropriate for ctrl-W to close the Full Acrobat Search window in the same way that it closes PDF files. It is especially risky in Windows 7, where the window frames are translucent and the window with the focus is highlighted in a way that makes it very difficult to distinguish from the windows without the focus.
Is there a way to prevent ctrl-W from closing the Full Acrobat Search window? I am using Acrobat Professional 8.Thanks, Dave.
I'm finding other inconsistent behaviour that is exacerbating the problem. If I close the last PDF file with ctrl-W, the search window stays open. If I close the last PDF file from the task bar, boom, the search window gets clobbered too, which entails another lengthy re-search. -
How to prevent popup dialog from closing when commandbutton clicked
Hi,
I have a af:commandButton inside a popup dialog and the button action calls a method in backing bean. When this button is clicked I would like to run the method in backing bean and return control to the popup window. The method seem to run fine but the popup dialog closes automatically. Is there a way to prevent popup dialog from closing for this action?
Thank you
KevinHi Frank,
Thanks for the link. I am not sure how to use this in my case. Following is part of what I am trying
<af:popup ...>
<af:dialog>
<af:form usesUpload="true">
<af:inputFile ..../>
<af:commandButton text="upload" action="#{backingbean.uploadAction}"/>
<af:outputText value="#{backingbean.filename} was successfully uploaded"/>
</af:form>
</af:dialog>
</af:popup>
When user clicks upload button I want to display a message that the file was successfully uploaded and keep the popup window open. But what happens now is once the file upload completes, the popup window closes automatically. This file upload part is not a must, user could skip doing the upload and instead input some text in a text area below (not shown in the code above). User could also just click cancel and exit the popup any time, so there is no mandatory field that I could check before closing the popup. Is there something I could do for this?
thanks
Edited by: user10720929 on Dec 23, 2008 10:36 PM -
How to prevent multiple users from updating the same data in coherence
Hi,
I have a Java Web Application and for data cache am using coherence 3.5. The same data maybe shared by multiple users which maybe in hundreds. Now how do I prevent multiple users from updating the same data in coherence i.e. is there something in coherence that will only allow one user a time to update. If one user is in a process of updating a data in coherence and some other user also tries to update then the second user should get an error.
ThanksI have a question on the same line. How can I restrict someone from updating a cache value when I a process is already working on it. I tried locking the cache key but it does not stop other process to update it , it only does not allow other process to get lock on it.
-
How to prevent a user from entering characters into a number field
How do you prevent a user from entering characters like A or B into a field that is defined as a numeric field?
Please note that
- we use block validation (for other reasons)
- we are not able to convert these numeric fields to character fields
We want to avoid a user being hasseled with the FRM-40209 ... message.
This message is
- not very helpfull because it does not inform us what the problem field is
- not suppressable
Any hints ?I went back to the drawing board on this one.
You are absolutely right : the message can be catched !
By writing an on-error trigger you can check for the error number. Sadly enough my first attempt on this used the on-message trigger which never fired hence my desperation.
Anyway, the on-error trigger in combination with :SYSTEM.CURRENT_ITEM or :SYSTEM.TRIGGER_ITEM enables me to display a more meaningfull message to my users.
Thanks for the hint. -
How to download windows recovery from HP
i have grub rescue issue , and i want to download windows 7 iso for my pc , i asked microsoft support they told me you have to ask Original Equipment Manufacturer witch is HP in my case ,
so please can any one help me how to download windows 7 iso , so i can boot from cd and format my pc ?You can no longer can download a Windows 7 ISO as of mid February because Microsoft has pulled the plug on downloads.
If you do not have recovery disks you may order them from HP if available.
If you live in the USA/Canada, call this number... 1-800-334-5144.
If you do not live in the USA/Canada, call the HP business PC support number for the country you live in.
http://h50146.www5.hp.com/lib/doc/manual/desktop/business_desktops/6005us_332630_007.pdf
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations. -
Dev question: how to prevent Adobe Reader from copying pdfs to "Download/Adobe Reader"?
I am making an app that downloads pdf files from a server and the users can decide to store them in the phone. Those files are kept in the app's private storage.
The pdf files can be opened from inside the app. The problem is that every time a pdf is opened, adobe reader copies it in "Download/Adobe Reader" (the path may be different depending on the device and the android version). Those pdf files should not be available from outside my app. How can I prevent adobe reader from creating copies in that folder? Do I really have to make my app track them down and delete them? It wouldn't be the safest solution...
In order to open the files, I se up a content provider:
from the manifest:
<provider
android:name="android.support.v4.content.FileProvider"
android:authorities="com.example.myapp.fileprovider"
android:exported="false"
android:grantUriPermissions="true" >
<meta-data
android:name="android.support.FILE_PROVIDER_PATHS"
android:resource="@xml/filepaths" />
</provider>
And then, in a method, I do this:
File pdfToRead = new File(pdfPath);
Uri uri = FileProvider.getUriForFile(context, "com.example.myapp.fileprovider", pdfToRead);
for (ResolveInfo resolveInfo : appsList) {
String packageName = resolveInfo.activityInfo.packageName;
context.grantUriPermission(packageName, uri, Intent.FLAG_GRANT_READ_URI_PERMISSION);
openPDF(context, uri);
public static final void openPDF(Context context, Uri localUri) {
Intent i = new Intent(Intent.ACTION_VIEW);
i.setDataAndType(localUri, PDF_MIME_TYPE);
context.startActivity(i);
Thanks for the help.Meh, I just hoped there was a way to tell acrobat "don't create a copy of the file because it's private". For now, I'm detecting the "downloads/Adobe Reader" folder, look if there's the file that was opened and delete it.
Now I need to know something that I can't ask on stackoverflow: what paths does Adobe Reader use to create the "Adobe Reader" folder? Because not every device has an external sd card (external, not removable. Just for clarity). In my device it's at "Environment.getExternalStoragePublicDirectory(Environment.DIRECTORY_DOWNLOADS)+"/Adobe Reader". -
How do prevent HTML snippets from being listed on search engines?
I just created a new website using iWeb 3.0.1. On a couple of my pages I embedded flash music players and video players using the HTML Snippet widget. I did a quick search of my website on google and noticed that the HTML widgets were showing in the results as separate pages. I then clicked on these HTML Snippet pages and up came the widget on a separate page by itself. How do I prevent search engines from listing any HTML Snippets on my iWeb site as separate pages?
Thanks
athafranPaste this in the HTML Snippet.
In the <body> ... </body> part you paste the code you currently use for your Snippet.
I haven't tried it, the noindex part, but the code itself is accepted by iWeb.
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<meta name="robots" content="noindex,nofollow">
<meta name="description" content="instructions for excluding search engine robots">
<title>Search Engine exclusion</title>
</head>
<body>
Here your current code.
</body>
Maybe you are looking for
-
Can I use a userKeyFile/userConfigFile as credentials for a JMX connection?
All, Using a wlst script I created a userKeyFile and userConfigFile so that I can run weblogic scripts without providing the weblogic password. I'd like to use these for my MBean calls from Java as well but I cannot find documentation on using creds
-
How can i see events in iPhoto in list form?
I just got an iMac and have imported all my photos from my PC to iPhoto. Now I want to view the "events" in a list form, but can't see how to do that and can't find any info in Help or the user interface. Anyone know how to do this?
-
Dynamically generate terget directory in receiver FTP adapter
Hi guys, I'm trying to set up a scenario where the file will be placed into a terget directiry based on values from the incoming message. I can't use variable substitution as my target message does not contain the needed value, so I'm trying to set u
-
Hi all, I´m trying to install the Oracle 8.1.7 client on Windows 2000 professional, but the OUI doens't start. So, It don´t generate log. The setup.exe come down after fews seconds. Somebody knows about this scenario? Thanks!!!! []´s
-
Install pure-ftpd after initial installation
Seems like this should be an easy one, but can't find an explanation. I have an OES 11 SP1 server up and running. I didn't install ftp during the original OES install. What is the easiest, least disruptive way to add it now? Is there a command line m