How to preview my timeline on a LED TV

Hi there,
I have just set up my new machine and today received delivery of a new LED TV for the purpose of playing back my project timeline. in my previous Windows XP setup I had a Matrox RTX 10 Capture card which allowed me to do this however when i tried to install it in my new system i found out that it wasn’t supported by Windows 7 and therefore no matter what i tried it wouldn’t install.
Does anyone know if there is another way around this with my current system configuration? Or are there any cheap cards out there that you can recommend? i don’t want the card for capturing or editing i only want it for playing back my timeline.
Hope this doesn’t sound too silly a question but i cant seem to find a solution.
Any advice will be appreciated.
Thanks in advance.
Rex.
PC Specs:
Premiere CS5.5
HP Workstation Z400
Windows 7 Pro
Nvidia Grforce GT 440 + HDMI Output
2 X Asus 23inch monitor
Kogan 24inch LED TV + HDMI, USB, SCART, PC-IN VGA, COAX, YPbPr, Video, L in, R in

The problem is nVidia. It only supports dual monitor output, despite the three connectors. Only two can be active at the same time. There are a few options:
1. Get another nVidia card that uses the same driver and use that one for the third display. Check carefully whether your PSU can handle that.
2. Get a Matrox card, but that often goes with other problems, because their drivers are always out-of-date. Matrox stuff is best used for its designed purpose, as a doorstop. (When CS6 comes out, all Matrox stuff will be outdated and require a new card, but you have to wait at least 6 months for a stable driver version, IMO).
3. Use the Scart cable to connect to a DV deck and output to an external device (only in SD format) over firewire to the deck and then over Scart to the TV.

Similar Messages

  • How do I fix my iPhone 4S LED Backlight

    How do I fix my iPhone 4S LED backlight?

    What happened to it, what is it doing, and how did it happen?

  • How do you use timeline in a pages document? I need to restore a document from earlier?

    How do you use timeline in a pages document?  I need to restore a document from earlier today?  How do I bring up the time - scale?

    View and restore past versions of documents

  • How to preview ENTIRE video (basic question but its not working)

    Hi
    Ive been fiddling with this for over 2 hours and I cannot for the life of me figure out how to preview the entire video. All I can get are the clips. When I click the source tab it only allows me to select individual clips not the whole track. How on earth do I preview the entire video?
    Thank you!
    And for bonus marks, is there a way to slim down the sides of the video (there are black bars in the native file) and re-render it? E.g. Change a video from 720x480 to 720x380 but not by shrinking the whole file, but rather trimming the sides (Sony Vegas can do this so Im wondering if Premiere can too)

    You are most welcome, and glad that it helped.
    Craig has addressed how to get another color. [It pays that he's in NZ, and is about 2 days ahead of me in the US... ]
    Depending on the effect that you want, you might also consider doing an "abstract" background, rather than a single, flat Color Matte. The choice will depend on what you want to do, and probably also on your material. When faced with vertical images in a "SlideShow," I use this often, and will often use it for all images in a SlideShow. This ARTICLE goes into more detail, just in case you might want to do something similar.
    Good luck,
    Hunt

  • How to preview WWI Label templates?

    Dear Experts,
    Normally for MSDS templates I know that there is preview option in CG42 transaction by which we can verify the changes that we are making whether they are correct or not however for WWI label templates, I am unable to preview using that option. Any idea how to preview them?
    Devdatt

    Dear Devdatt
    did you use "Label Wizard"? Normally there is no difference in CG42 between "normal" report and label
    Which parameter do you populated in CG42? Doe you have maintained data ? The test of label documents in WWI is the most complex one in EHS
    C.B.

  • How to create the timeline chart in SSRS 2008

    Hello Everyone!!
    How to create basic timeline chart with x asix as month and  show project start date as marker on this in ssrs reports
    Which type of chart i should use and any sample link?
    Something like in below link
    Timeline
    image

    Hi SonikaJ,
    After testing the issue in my local environment, we can enable the Scalar axis option to display a set of axis values on a continuous scale and reset the “Interval” property of the X-Axis. For more details, please see the following steps:
    Drag a Column Chart to design surface, insert corresponding fields.
    Right click on the Horizontal Axis and open the “Category Axis Properties” window.
    Check the “Scalar axis” option, set the “Interval type” to “Months” and set the “Interval” to 1 for example.
    Right click on the Vertical Axis and uncheck “Show Axis” option to hide the Y-Axis.
    Right-click the series columns to select “Show Data Labels”, then right-click on the Label and select Series Label Properties.
    In the Expression dialog box, modify the expression to anything you like.
    To adjust the width simply select the appropriate series and go to the properties pane and drill down into the Custom Attributes and find the PointWidth. Then set the value to 0.1 for example.
    If there are any other questions, please feel free to let me know.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How to preview the emails in List View

    Click on the emails icon. openan account, and you will see all the emails in the view:
    Once you see all the emails.
    Place one finger on top (near the time stamp)
    Place second finger or thumb at the horizontal line separating the emails and drag down. AND you will see the email under there.
    You can actaully see the email without even opening it. It also means that even though we do not see the complete email, it is always there.
    I found out this on PreCentral.net - cool feature. I tried and it works for me the very first trial.
    http://www.precentral.net/how-to-preview-palm-pre-email
    Try it out!!
    Post relates to: Pre p100eww (Sprint)

    Its easier if you pinch outward to the sides within the message instead of trying to do it at top and bottom.

  • Lags while previewing AVCHD timeline

    Hey Guys,
    Sorry for another thread being opened, but I guess the old thread is not to the point with my problem.
    The current situation is simple, I can't edit avchd footage.
    With only one strip of video (AVCHD 1080i 25fps), I can't preview the time line without heavy lags.
    I don't know where to attack the problem from.. the machine is brand new and I have tried just about everything.
    Is it a hardware problem? I'm pretty desperate.
    The machine:
    i7 2600k, p8z68 v pro MOBO, 16gb ram (4x4GB G.Skill RipJaw X Edition Dual Channel CL7-8-7-24)
    GTX 560 Ti ('hacked' the cuda list)
    500gb black caviar sata 3 for os
    2*1tb black caviar sata 3 raid for Project & Media
    2*1tb black caviar sata 3 raid for Scartch,Renders,Etc.
    2tb green caviar for backups.
    *using the onboard raid controller.
    No index, no compression, maxed out for performance in every aspect (removed visuals), disabled services, removed auto startups thingies
    disabled anti virus, windows is up to date.
    Hdd are defragged without partitions, I get 163 average speed in hd zune which I think is normal.
    Ram: no page on any drive other then on the scratch raid with 24gb set as fixed size, power plan is set to high performance.
    I'm running adobe cs5.5 with latest 5.5.2 update.
    Benchmarking with the ppbm is quite ok compared to other similar sets.
    Because the problem is previewing the timeline my guess, the problem is something with read speed from the hdd.
    The CPU goes up to 30% when I'm playing with the timeline and memory usagase is about 7-8gb
    One last thought, maybe I'm editing in a not suitable sequence? when I'm laying the footage on the time line the entire sequence is yellow.
    Many thanks,
    Eliran.

    Hi Eliran,
    At the bottom left of default Premiere layout, you should have a "Browser" pane or tab - open that and navigate to where the video files are. I don't think you even need to dig all the way down to the Stream folder - this is what Browser does, is locate the VIDEO clips out of the complexity. It will list them out, and you can multi-select the ones you want and drag them to the timeline sequence OR the clip bin.
    The way AVCHD works is that audio and video files are sometimes separate, then there is the metadata and such, and the parts are all kind of separate, so if you ONLY go and import the video clip, sometimes causes issues in editing. Better to use Browser because it understands all that and takes care of it for you. Maybe I'm oversimplifying or don't have it 100% correct, but just saying that we've had customers with editing problems that were solved by using Browser rather than Import.
    Doesn't hurt to try that method, is recommended for tapeless materials.
    Jeff Pulera
    Safe Harbor Computers

  • Streaming audio begins at beginning when previewed in timeline

    I have audio inserted along the main timeline of my Flash movie. It is set to stream. When I try to preview the timeline to match the narration with events along the timeline, no matter where I am on the timeline, the audio starts at the beginning. Makes timing incredibly difficult.
    Is there a fix for this, or is it a bug in the Flash Pro CC that will cause me to continue to work in Flash 5.5?
    Thanks.

    Ah I understand. Well here's what I managed to HUNT down
    This issue was posted on this very forum on April 15th which can be found HERE.
    If you look at reply #3 you can see that member has the same computer I had (HP desktop with beats audio).
    I remember trying what he suggested and it actually worked...for a small while.
    When the issue came back, I continually tried to enable/disable the Beats audio in hopes of fixing the issue.
    Sometimes it would work immediately. Other times it wouldn't work at all.
    The member in post #3 is probably right in that this may be related to the audio driver on some computers.
    Now, I just got a Dell XPS8700 and I haven't gotten the issue yet.
    Of course I've only been using it for a day or so but so far so good.
    The HP desktop I was using is going to my friend.
    He will be using it to work on our show so essentially he'll have to deal with the headache lol.
    What bothers me the most is that I get these Flash CC updates pretty often and each time I think it's fixed, it's not.
    To add insult to injury when you get a Flash CC update through Adobe CC you'll see a link below the update that you would THINK would show you the changes that were made but it doesn't...it just goes to the default Flash CC webpage...sigh.
    I personally think it's down right hilarious that so many paying customers could have an issue like this and Adobe just sits back and counts their money.
    Guess our cries for help are being drowned out by the money counting machines...

  • How do you get timeline view on imovie 08  and speed up a clip on imovie 08

    how do you get timeline view on imovie 08  and speed up a clip on imovie 08

    Hi
    You can not - Nobody else (if not a very selected few at Apple dev.group)
    TimeLine was lost in iMovie'08 and 09 and a very simple one re-introduced in iMovie'11
    Speed Change - Was omitted in iMovie'08 - and returned in iMovie'09 - BUT has to be used in a certain way - the glider/slide if used - will destroy the audio (a Known BUG - in both iM'09 and iM'11) but use of pre-set fixed no. 25% 50% 100% 200% etc. will work.
    Yours - still using iMovie HD6 - and LOVE it - Bengt W

  • How to preview an image on laptop prior to taking the shot?  I have a Nikon D60

    How to preview an image on my laptop prior to taking the shot?  I have a Nikon D60

    If you mean tethered shooting that's possible with Lightroom, but only with a select few Nikon/Canon/Leica models. I'm afraid the D60 isn't on the list: http://helpx.adobe.com/lightroom/kb/tethered-camera-support-lightroom-4.html

  • When preview the timeline, audio will be noise.

    Hello.
    I have an experiment to be placed in the timeline, the audio of different sampling frequency.
    However, when previewing the timeline, you will hear a noise.
    48kHz based sequence + 48kHz footage = OK!
    44.1kHz based sequence + 48kHz footage = NOISE!
    I've created a sample project.
    Will you try someone?
    https://workspaces.acrobat.com/?d=a2ulIg2OrcCa-Fw1JKcyew

    Addational info...
    Premiere Pro CC v.7.2.2
    OS: Windows7 Ultimate SP1 x64
    Audio Device: HDMI LCD Monitor from Intel HD Graphics (Core i5-2500), with "Premiere Pro WDM Sound"

  • How to preview print in Contract agreement ( ME32K)

    Good morning SAP Experts, please clarify my ques, how to preview print in Contract agreement ( ME32K).
    regards,
    Anisha

    Dear Anisha,
    You could either use transaction ME9K or report RM06ENDR_ALV.
    Post your queries in relevant forum to get efficient answers. Moving the thread to MM Forum.
    Regards,
    Naveen.

  • How to preview effects on question slide?

    Captivate 5
    Win XPSP3
    Problem:  How to preview effects (such as drop shadow) applied to objects (jpg) on a question slide.
    Situation: Quiz consisting of say 5 random questions pulled from a pool of 50 multi choice questions.
    Question Pool Panel:
    I am constructing the question slides in Quizzing workspace.
    I can view the slide and add the questions and answers + any jpg images that may be required.
    If I want to add a drop shadow to an image I select the object (img) and switch to the Effects panel.
    I add the drop shadow and can make the adjustments BUT the effect is not visible on the slide.
    The Live Preview button is greyed out and unavailable.
    Preview options from the toolbar are....
    F3 slide.... Does not show the effect.
    F4 project.... would take too long AND would not be sure of viewing the slide to which I had added the image effect.
    F12 browser.... shows the whole project with 5 random questions but not necessarily the specific slide.
    I switch to Filmstip panel:
    More preview options are available...
    F8 this slide... If I select a blank random Question slide it pulls a question from the pool of 50 but not necessarily the one on which I am working.
    F10 next 5 slides.... same problem as F8
    Unacceptable workaround:
    I can create another "test" pool containing one question.
    Copy the edited slide to the "test pool and preview it from there with F8 or F10
    A lot of extra work....
    So the effect is working and would be applied to the finished quiz.... BUT.... I cannot (without a lot of P'ing about) preview and adjust the effects applied to a question slide.
    Does anyone have any ideas?
    Regards
    Frank

    If you want to test the effects on a particular slide from your Question Pool, and you don't want to have to publish all slides to see it, just right click the slide from the question pool, and select Move Question To > Main Project.
    Then you'll have the ability to preview the effects as with any other slide.  When you know the slide is completed, just move it back into the Question Pool.

  • I have two editors working on FCPX in two different cities. Here is the question: How can a project timeline be shared if they are working from mirrored source files?

    I have two editors working on FCPX in two different cities. Here is the question: How can a project timeline be shared if they are working from mirrored source files? Is there any easy way to share a project time line?

    There an episode of MacBreak Studio where Steve Martin explains exactly how to share a project, while having two separate copies of footage and events:
    http://www.youtube.com/watch?v=Hu-ga7fxKh8

Maybe you are looking for