How to print 4 12 index cards hp photo smart 50010

body

Thanks for your reply. :-) I can't seem to find the driver alone for that deskjet 450 because I have googled it and it gives me the wizard install but it always recognizes my actual printer and won't give me the 450 driver. then I found this download page http://www.driversdownloadcentre.com/hp-450-printe​r-driver-download/    that says its the driver but when I downloaded it,(the first one for windows 8.1 64bit) it gives me all these files that I have no idea what to do with them, unless they were actually already installed by clciking that .exe file which created a DJ450 folder with a subfolder inside called English and anothersubfolder that has 17 hp files with DL_, DA_,HL_, & EX_ extensions. So kinda lost here 

Similar Messages

  • Can't print on an index card

    Yes, I'm already trying to print out on index card the text which was created in Word and and then printed to the PDF writer "printer"
    Unfortunately, I get my text printed on an 8.5"x11" letter size paper not on a 3"x5" custom sized sheet that I have specified in Word & it shows up in Word as a 3x5 sized paper. Printing on an 8.5"x11" paper is not what I want; I want to print on an index card put into the printer.
    I have done this with no problem directly from Word. But since I don't currently have a printer, I need to have the PDF portability to take it to Office Max and get it printed on an index card there.
    Even though I specified custom size in Word for the document as 5"(width) by 3" (height). I cannot get the Adobe Pro 8 to produce a custom PDF document that has those specifications. I have gone to Advanced printing options in Adobe Pro 8, PostScript, etc. and save them there (it takes the settings), but it's not coming out, I still get the 8.5x11" letter sized paper. And Office Max didn't know how to do this either.
    Is there anyone that can help?

    What version of Acrobat are you running? I'm running Acrobat Professional 8.
    I can't imagine what I could've done wrong. I'll detail my exact steps and maybe you could tell me what I did.
    I have a custom sized Word document that's 3"(high)x5"(wide) shown in the graphic below.
    I do a CTL P and get the print dialog box with the default of Adobe PDF,
    I click on Properties & get the Adobe PDF Properties with the Adobe PDF Setting tab focused,
          Default Settings: is Standard
                   (although here I've also created and Index Card settings and that didn't work either, both w & w/o the last setting below)    
         Adobe PDF Security: is None
         Adobe PDF Output Folder is Prompt for PDF filename
        Adobe PDF Page Size: is now Index Card, which I have just created with settings of:
                                                 Paper Names: Index Card
                                                 Paper Size Width: 5.0
                                                 Paper Size Height: 3.0              
                                                 Unit: Inch
    View Adobe PDF Results is checked
    Add document information is checked
    Delete log files for successful jobs is checked
    Ask to replace existing PDF file (it does this even if it's NOT checked) is checked
    I click OK and OK again; it goes thru its gyrations and
    out pops an 8.5"x11" sheet on the screen with the data from the Word document flush up against the right edge in the middle vertically between the top and the bottom of the page.
    Then I go to crop the page to the index card size and first it says I can't change the page size,
    so I go to Print Setup and change the size there and go & crop in and nothing happens, it's still 8.5x11.
    The only thing I can think of is that you have a different version than me or maybe wonderful Vista has screwed things up.I miss XP.
    Any suggestions?~JerseyGrr l

  • How to print 4-fold greeting cards?

    I recently upgraded to iPhoto 6.0.5 with the intent of using it to print one-off greeting cards -- NOT necessarily ordering them from Apple.
    Most greeting cards programs I've used in the past allow you to print a card on one-side of one sheet of paper, then fold it in 4, so that it fits nicely in a 4x6 envelope. Not so classy, but easy and fast.
    For the life of me, I haven't figured out how to get iPhoto to print greeting cards like this. Is there something obvious that I am missing? Other hints for making quick and easy cards with little printing fuss? Thanks in advance...
    Mac Mini   Mac OS X (10.3.9)  

    I found some software that you can download called Easy Card that allows you to make your own cards or use there templates.
    http://www.scriptsoftware.com/ecc/
    I just downloaded it myself as I was looking for a way to do it in Iphoto and as you found out there is no way to do it within Iphoto to print so you can do the four fold thing you talk about.
    Anyways there software got good reviews and user reviews as well and I am still playing with it on the trial period right now!
    I designed a Birthday/ St Patricks day invitation ( my 11 month old has his 1st birthday coming up on St Patricks day) and the easy card software works great in how it works with Iphoto and my clip art that I have. It has an OSX layout so I found using their controls pretty easy in order to get pictures and text and such into my card.
    Check it out! It is a free download for trial and can be purchased for $30
    I am just about to do it myself once I am satisfied with my first design!
    I need to find more clip art though. Maybe they have more on there website once you purchase it!
    Anyone know a good site to get clip art??
    powerbook 17   Mac OS X (10.4.3)   1 GHz 512 Ram
    powerbook 17   Mac OS X (10.4.3)   1 GHz 1 gig Ram

  • How to print a file index in mac os 10.9

    How do I print a file index in 10.9?

    I don't have a plain CD, but I tried a CD-RW and the ability to leave it appendable was not available. I'm not sure if that is related to CD-RW or if the feature was dropped in Mavericks.
    Check the More Like This links on the right.
    The process previously was to create an image of the folder that held the things you wanted to burn. Then, in Disk Utility, burn the image to disk and check the box to leave it appendable. This was only available for CDs, not DVDs.
    You might try some other burning software.

  • HP LaserJet 1018 not printing landscape on index cards

    I regularly print on 3 x 5 index cards with this printer.  In fact, this is the reason I purchased the printer.  Just this morning, I am suddenly unable to print landscape on it.  Any file set up in landscape will run through the printer and come out blank.  However, if I change the set up to print portrait, my prints are perfect.  Hm...does anyone have any suggestions?

    Hi. Did you ever figure out why you can't print 3x5 index cards in landscape mode on your HP printer? I'm having exactly the same problem. I can print the document on ordinary 8.5x11, but not on index cards. It was working a couple of weeks earlier. I've tried all the obvious solutions but so far nothing works. Thanks.

  • How to print on small cardboard card?

    I have an HP 4525 LaserJet and am using windows 7. 
    I'm trying to print on a small cardboard card. Since the card is so small I am taping it to the center of a regular 8.5/11 piece of paper and feeding that through. 
    The result is the card in the middle: 
    The cards on the left and right I printed using an inkjet printer by comparision. As you can see there are two problems. 
    1) The top of the card seems to have been caught in the printer and the ink was smeard or had difficulty adhearing to the cards surface...
    2) The font size is much thicker, I assume this is because the printer is somehow set to some kind of economy mode or is using a low DPI. I searched the settings on the computer but could not find any to improve quality...
    Does anyone know how to solve either of those problems? 

    Hi largee,
    I wouldn't recommend that you continue to tape the card to the regular paper.  There are multiple things that could go wrong and I think there is a better more reliable method.
    The printer has functionality in it for automatically detecting media.  You can also set the media type specifically in the control panel when you load media.   Also, when the media type is correctly know, the printer will automatically select color tables that are optimized for that media type.
    What I would recommend that you do is the following:
    1) Purchase 8.5x11 sheets of cardstock that will allow you to print more than one card on the page.
    2) Specifically, set Cardstock, if Cardstock defined the weight range that your media is in.
    3) When printing, I would also set Cardstock in the driver.   You don't have to do this, but it is a good habit to be in for special projects.
    4) In your app that is used to print, see if you can adjust it so that the images you are printing can print multiple on a single sheet.  Leave a little room at the leading edge just in case there is any leading edge damage, which since the printer will be running slower should be rare.
    5) Print.
    Regarding the font size....it is most likely a difference in how the InkJet vs. the LaserJet decided to implement the font rendering.   I would recommend you adjust the font in the app until you are happy with it on the LaserJet.  I don't believe there is a setting that would enable you to make the lines thinner.
    Hopefull this is of some help for you.
    Kaz
    Kazman
    I am an HP Employee
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • How to print 10 employees id cards on a4 size in smartforms? Reply soon....

    Hi friends
    There is requirement to print 12 employee id cards ( 2 * 6) in A4 size in smartforms.
    Id card consist of these fields
    company address
    emp id
    emp name emp photo
    designation
    address
    Option 1 : Photos are on desktop, we upload by using se78
    Option 2 : Photos are stored in one of the infotype
    How all the emp id will print their respective photos in the smartform.
    Plz reply as soon as possible.
    Thanks in advance.
    Ravi

    hi,
    Use intractive form it will be easy tcode SFP..
    Atul

  • Printing to an Index Card

    Hello. I am in the education field, and I'm trying to print 3x5 index cards to a Xerox Phaser 3500. I've been trying to do it in Word 2004, to no avail, and I'm not finding it any easier in Pages. Any suggestions?
    Thanks!

    Difficult to help without knowing what problems you are running into....
    General approach:
    First, will your printer actually run a 3x5 index card? Can you load it and have it gripped by the printer and spit out the other end?
    If your printer can handle it, then you have to tell Word/Pages that you want the paper size to be 3x5. In both programs, this is under File | Page Setup. You might have to use the Manage Custom Sizes entry under Paper Size to create a custom paper size.

  • What is the secrect to print 4x6 Index Cards in an HP C309a

    I have a Microsoft Word Template for printing recipes on 4x6 Index Cards.    However, there is no known combination of settings on my HP C309a that will let me print Index Cards.    The built-in Printing Shortcuts contains an entry called Postcard Printing, but it call for using the Photo-Tray.     When I put my cards in the photo tray, it prints from the main tray.  If I remove the main tray it tells me add paper.
    This is a very simple task.  Why does HP make it nearly impossible to do something as trivial as printing on an Index Card?  I'm wasting sheet after sheet of paper trying to figure this out.   I need detailed, step by step instructions on how to proceed.   

    Yes, I did try that and it made no difference.     I must admit, the timing of your reply is perfect.    Just yesterday I accidentally stumbled on the answer to this problem.   And it clearly demonstrates how poorly designed the printing feature is in Microsoft Word.
    To print a 4x6" Index Card in Microsoft Word 2010, you must do the following on the Word Page Layout Toolbar:
    1. Click on the Orientation Icon and select "Landscape".
    2. Click on the Size Icon and select "Index Card 4x6 inch".
    3. Click on Margins Icon and select "Narrow".
    Place the Index Card stock in the Photo Tray and click on the Printer Properties for the HP C309a.   Then set the following preferences:
    Printing shortcuts: General Everyday Printing
    Paper source: Photo Tray
    Paper sizes: Index Card 4x6 inch
    Paper type: Automatic
    After setting the Printer Properties,  you must set the layout and scaling.  
    1. Click on the last drop-down setting in the Print Print Page.
    2. Next click on Scale to Paper Size and select Borderless 4x6in from the list.
    Lastly press the Print button.

  • Trying to create index cards in pages

    Hello,
    I am trying to create a 3x5 flash card template to study, and can't find an easy way to set this up on Pages. I need to make about 150 double-sided cards with text on the front, and text wrapped around a small picture on the back. So I need to create an efficient system to plug in data as well as a picture for all of these items. I've tried several things so far:
    1) Create a blank document 8.5x11 landscape orientation, then pull the guides down to fit 4 cards on a page. I would then ideally enter the info, print double-sided, then cut with a paper cutter. This formatting works fine for the first page, but I can't seem to replicate this page or the guides onto subsequent pages (guides can't be made to master objects I guess). If I try to select all 4 text boxes, copy, then paste them into the next page they for some strange reason scale down in size, so I lose the dimensions and placement of the boxes.
    2) Create a brand new template with aforementioned guides and text boxes. And again, when I tried this I couldn't get the page and formatting to be replicated to subsequent pages. When I made the text boxes into master objects to try and achieve this, all text I enter into them gets replicated into every subsequent box, which is not what I need because I need unique text on each card.
    3) Create a 3x5 page size document, which works ok but I cannot get a placeholder image to be replicated to subsequent pages. That means I need to drag the pictures on and format them one by one, which is again time-consuming. This is also tricky because I need to find a printer that handle printing directly onto index cards, which is a little specialized compared to printing on standard letter paper.
    I've also searched the forums and google to try and find add-ons or shareware that can do this, but haven't come up with anything!
    This is weird because surely I am not the only student who wants to create index cards on the computer rather than by hand! Please help..my final is next week..
    Thank you.

    Try to "capture" your first page thru the menu Format > Advanced > Capture Pages"
    Then you will be able to insert a new page with the defined attributes from the menu entitled "Sections" in the toolbar.
    Yvan KOENIG (from FRANCE jeudi 23 juillet 2009 19:09:05)

  • I can't print from a sd card on my mac to an epson printer paper source will not show

    I have a mac pro and an epson printer, I am unable to find how to print from my sd card and have it print from the right papaer source.  There is not an option of paper source when I try to print a 4 x 6 photo

    What a waste of space to paste the code.
    Why not ask in the iLife > iPhoto forum where your question belongs.

  • How to Print a Character in Reverse video ...?

    Hi Could any one of you help me " How to print a character in Reverse Video " in SMART Forms and in SAP Scripts.
    Regards,
    Saravanan
    <MOVED BY MODERATOR TO THE CORRECT FORUM>
    Edited by: Alvaro Tejada Galindo on Mar 26, 2009 5:31 PM

    deepak_c3 wrote:
    Thanks for the info.,
    where should the page number n-1-i be returned ?
    Which method implementation of Pageable interface should return the page number ?w.r.t. your first question: don't return that number but return page n-1-i when page i is requested; your document will be printed in reverse order. Your class should implement the entire interface and wrap the original Pageable. (for that number n your class can consult the wrapped interface; read the API for the Pageable interface).
    kind regards,
    Jos

  • How do you print a size 2 font document on a 4 X 6 index card?

    How do you print a size 2 font document on a 4 X 6 index card?

    Some printers have a print odd or even numbered pages setting. See if yours does. Do a ⌘ + P and select 'paper handling from the pull down menu to see if your printer has this feature.
    Kurt

  • Tutorial: Print index cards without removing paper from tray for Officejet Pro 8000.

    The HP Officejet Pro 8000 and Officejet Pro 8000 wireless do not have a slot for inserting index cards and envelopes.
    If you are wanting to print index cards without removing the paper from the tray, follow these steps.
    The steps below are for 3 x 5 index cards.
    1.) Open Microsoft Word
    2.) Go to the Insert tab and insert a rectangle shape
    3.) Draw a rectangle of any size
    4.) Right click on the rectangle and select "Format Autoshape..."
    5.) Under the Size tab, enter 5" for the height and 3" for the width (make sure "Absolute" is selected)
    6.) Under the Layout tab, select "Center" for the horizontal alignment
    7.) Click OK
    8.) Use the keyboard up arrow key to move the rectangle to the top of the page.  Make sure the top edge of the rectangle touches the top edge of the document.
    9.) Print this document on plain 8.5" x 11" paper
    10.) When you want to print an index card, place this 8.5x11 document in the paper tray printed side face up.  Then place an index card over the rectangle and align with the border of the rectangle.  After you print the index card, remove the 8.5x11 paper for the next time you need to print an index card.
    Note 1: This are USA instructions.  If you live in the UK or other countries you may have different paper size standards.

    I can't tell you how much I HATE this printer.  I will never buy an HP product again.  BROTHERS printers are simply and easy to use.

  • How to print labels from my Christmas card list?

    Does anyone know how to print labels from the Christmas card list in Contacts?
    I am new to computers and having managed to type in all my addresses I was hoping to print some labels!    Please can anyone help!

    Welcome to the Support Communities. What version of OS X is your Mac running? ...Click on the  menu at top left of your screen and choose About This Mac. Note the version in the form 10.n.n and then see this ASC tutorial:
    Update your product list
    Then see this Apple doc, which is for OS X 10.9 (Mavericks)...
    Contacts (Mavericks): Print contact information
    ...Found by searching here:
    http://support.apple.com/kb/index?page=search

Maybe you are looking for

  • Huge data usage with Verison 4G LTE hotspot ( Verizon-890L-50DB)

    Recently upgraded my internet service to a Verizon 4G LTE hotspot (Verizon-890L-50DB).  First month - no problems - second month - I have 6GB of overage charges.  Every time I log in to check email or any other minimal data usage task, I get hit with

  • How to store the tld file somewhere else...

    Is it possible to not be forced to always copy the tld file for a tag library into the WEB-INF directory but to pick up the file from a jar/linked resource/project instead. The JSTL seems to be able to do it. Though it may be being referenced by some

  • ERROR ITMS-9000 for AIR app

    I am getting this error when compiling an IPA with Flash CC 2014, AIR version 15.0: "ERROR ITMS-9000: "This bundle is invalid. The value for key CFBundleShortVersionString [1.0] in the Info.plist file must contain a higher version than that of the pr

  • JDBC MS SQL Server driver catch SQLException on Update statement

    Hi, We change the driver for the BEA WebLogic Type 4 JDBC MS SQL Server driver driver=weblogic.jdbc.sqlserver.SQLServerDriver url=jdbc:bea:sqlserver://db_name:port_number since we use this driver we got an error when the application try to update a f

  • Why won't Safari 2 display sites with .dll files?

    My new powerbook, running OSX 10.4.3, and Safari 2.02, won't access my brokerage account. When I try to log in, I get a blank browser window, and it downloads a file with a .dll extension to my desktop. The problem is that it downloads the file inste