How to print 4 up correctly in iPhoto under Mountain Lion?

I got about 30 images from a client. I want to print them 4 up. I tossed them into iPhoto and when I go to print a "Contact" sheet it gives me the options for how many columns I want. So I go to 2 columns and I get 4 up.
Problem is, it's putting them 4 up in portrait mode with a ton of space above and below each one with image titles below them.
In iPhoto on our old G5, I could just tell it 4 up and it would arrange them 4 up to best fit on the page (in this case it would be in landscape mode) without any of the image names below.
How do I get it back to that? I can't seem to find any settings for it to lay out correctly, 4 up in landscape on an 8.5 x 11 without borders. I just want them as big as they will fit 4 up on a sheet.
Thoughts?
EDIT: I figured out how to get the file names off via the Settings button in the lower right. Fine. I also went to Print Settings and changed the Paper Size to: Custom and set it for 11" wide x 8.5" tall so that it's landscape.
Ok... getting there but there is SO MUCH WHITE space around each image for some reason when I'm back in the preview. Whats up with that?

Similar Messages

HT1338 I have an HP Printer/scanner, and since upgrading to Mountain Lion I can no longer scan on my HP. HP tells me that I can get an upgrade app from 'Apple Software Upgrade' . Does anyone know how to do this?

I have an HP Printer/scanner, and since upgrading to Mountain Lion I can no longer scan on my HP. HP tells me that I can get an upgrade app from 'Apple Software Upgrade' . Does anyone know how to do this?

HP couldn't find its own apps with both hands and a flashlight.
As of Lion all scanning functions are incorporated natively in OS X. You can scan three ways:
Use Preview: File > Import from scanner
Use Image Capture
(Preview and Image Capture are both in your Applications folder.)
System Preferences > Print & Scan. Select your HP and use the Scan tab.
If you have HP's "Image Zone" software installed, you no longer need it and it no longer works anyway.

Landscape printing under Mountain Lion?

Is anyone else having trouble printing in landscape mode from Pages under Mountain Lion?
I've upgraded to Mountain Lion and installed the update for Pages. Ever since then, whenever I try to print in landscape mode, the result comes out in portrait mode instead with blank space at the top and the right edge cropped off. I have two different printers — a Xerox Phaser 6250 networked Postscript printer and a Canon Pixma iP3000 shared with printer sharing — and both of them have the same problem.
Right now, my workaround is to preview as PDF, and then print from the Preview app. That works fine. Printing in landscape mode from Safari works fine.
Are other people running Pages under Mountain Lion having this problem, or is there some other factor that I haven't thought of?

Excellent suggestion.
I created a new account, and it does not have the same problem. So that probably means that some setting in my home directory is messed up.
However, I haven't figured out what it is yet. I quit Pages, threw out com.apple.iWork.Pages.plist, restarted Pages, printed a sample landscape brochure, and still have the problem. I then quit Pages and threw out several other printing-related preference files like:
com.apple.print.custompresets.forprinter.Winsor.plist
com.apple.print.PrintingPrefs.plist
org.cups.PrintingPrefs.plist
com.apple.print.PrinterProxy.plist
com.apple.print.custompapers.plist
That didn't solve the problem either. Any other suggestions on where to look?

How do I sync Office 2011 for Mac with Contacts under Mountain Lion?

How do I sync Office 2011 for Mac (Outlook) contacts with Contacts under Mountain Lion (or iOS6)? Outlook doesn't seem to have moved on from iSync, and meddling seems to produce unpredictable results.

You can't. Microsoft have not added support for the industry standard sync protocols iCloud uses.
See: http://support.microsoft.com/kb/2648915

How do I set the default startup sequence for iWork documents under mountain lion?

I am frustrated when starting Pages under Mountain Lion (OSX 10.8.2). Instead of opening with the documents that I was working on when I closed the app, it opens with a standard "open" dialog box. I am forced to navigate through my folders and files or "create a new document" and then go to previously opened files. I would like Pages to open in the same status it was when I last used it, or if no files were open, to then automatically "create a new document" using the "Blank" template. In other words, how do I open Pages directly without the intervening dialog boxes?

Open General preferences and uncheck these boxes:

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Will the Zoom R16 work as an interface in Logic Pro X under Mountain Lion?

I've searched and found some indications that the Zoom R16 will work and has problems with earlier versions of Mac OS; so my question is actually will the R16 work under Mountain Lion (GB, Logic Pro, etc) as a control AND a recording interface?
I'll be using it on either a late 2011 MBP core i7 16GB Ram solid state HD (live playing, live recording) or on a late 2012 iMac core i7 32GB Ram solid state HD with Thunderbolt and USB3.0 outboard drives (recording).
Any input would be appreciated... I've been unable to definitely tell if it's an "install the driver, install Logic Pro, and then rock n roll" or it's a "doesn't work correctly, makes noise, crashed my system AND killed my pet rabbit" kind of thing.
Thanks,
Les

Thanks Art of Sound. I did see that post but it didn't give me a warm feeling about the Zoom.
My bad, I should have posted back after I messed around with this. It turned out that my problem was due to some kind of intermittent connection within the Zoom itself.
I got another one, and it's working fine now as a Mackie Control. It's a little arcane getting it hooked up in Logic (mostly due to inexperience on my part), but so far it seems to be working fine...
If I can spare anyone the frustration/confusion:
Basically:
Download the latest and greatest Zoom R16 driver from their web site and install (I'm using OSX ML and it works fine with Logic Pro X).
Plug in Zoom R16 via USB 2.0 cable, (then on the Zoom itself, select USB, then AUDIO INTERFACE? (Enter), then SETTING? (Enter).
You may need to open Audio/Midi Preferences and set that to the ZOOM R16.
Open Logic and hopefully it sees the Zoom.
Under main Logic Pro X header, select Control Surfaces>Setup
Find and add "Mackie Control" (there are other ones, this one works, can't speak to the rest).
Then (and this is the part that I kept missing) make sure to select the Mackie Control (so it gets a blue box around it) and then make sure the Output Port and Input Port are set to Zoom R16_R24 using the little up/down arrow thingies at the right of each box. I didn't see these/figure out how to select at first... I'm a DA NOOB.
That's it. Open a new multitrack project, assign your inputs to channels, and off you go!
Recording:
All inputs work, level control and faders (which aren't motorized, so it can be a little confusing at first)
Transport and control buttons work, the jog/shuttle is useful.
There are 5 function buttons that by default change the Logic screen setups (can be programmed differently)
Track button seems to mute/unmute only.
The on-board condenser mikes work, if you want them (channels 7 & 8 on the Zoom). Ugh.
Electric guitar direct in seems ok, and a Shure SM57 worked fine. I'll be working with some better mikes hopefully this weekend.
I have it working happily with a late 2011 MBPro, and a late 2012 iMac.
For the money, considering it's a stand-alone 8 track digital recorder (seems to work ok for that purpose so far) as well, it's actually sort of cool. Setup your mixdown in Logic as a wave project, and pull the files off the SD card (Zoom can be configured as a USB card reader easily). Will record at high sample rates allegedly.
I won't be so lazy in future, and I'll report my on-going experience with it.

How can I make a bootable disk for Mountain Lion?

How can I make a bootable disk for Mountain Lion?

Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.

How to enable logging for mail.app in Mountain Lion

I am at my wits end trying to figure this out....
Does anyone have a clue how to enable the logging for mail.app under Mountain Lion?
In the past, you could open up Console and click on Console.log and see the logging of mail. Under mountain Lion, there is no more console.log. I cannot figure out how to enable it.
I have tried to run the AppleScript of "Turn On Logging" but the script errors out under Mountain Lion.
Does anyone know how to do this or a better way, maybe a tool or something that can help you troubleshoot mail.app issues?
Thanks in advanced

Hello,
I have a similar problem. The script "Turn on Logging.scpt" runs without error, but I do not see any socket logging. I only get two messages, which I also get when I start mail without the script by just clicking the mail.app icon in the dock. The Messages are:
1/10/13 3:43:32.618 PM Mail[11276]: Using V2 Layout
1/10/13 3:43:36.388 PM Mail[11276]: *** -[IADomainCache init]: IA domains cache is out of date.
Any help would be appreciated

HDMI Video corruption under Mountain Lion

I have a mid 2011 15 inch Macbook pro. Upgraded to Mountain Lion. I use an HDMI TV connection as an external monitor with the laptop closed. I switch to another work PC on the TV using the source selection. This causes the Mac to Sleep because no external monitor is detected. When returning to the mac and waking it up via a blue tooth track pad, the video is corrupted. It's just scrambled.
Unplugging the monitor and plugging it back in, doesn't help.
Unplugging the monitor, opening the mac, then plugging in the cable fixes it. I use a mini display port to HDMI connector.
This worked fine with no corruption under Lion - but it is easily reproducable with corruption under Mountain Lion.
Any advice?

Opening and closing the lid corrects the problem by causing the external monitor to refresh.
It doesn't have to be disconnected and reconnected.
The problem still occurs after the 10.8.1 update.

Updates for iPhoto in Mountain Lion, on a work computer.

Updates for iPhoto in Mountain Lion are only available from the App Store. I'm on a new iMac which is a work computer, owned by my employer, and don't want to enter my credit card details. The brand new iMac came with iPhoto installed, so I don't see why I should purchase updates for it.
Does anyone have a similar experience or any advice please?

You don't have to but you need to enter the Apple ID and passowrd for that Apple ID from the person that registered that Mac. So the owner would have those and if not they need to create an Apple ID for the company. As without one no updates can be done on that system.
In your tags it says you are using OS X 10.4.11. If that is incorrect please change it to the correct version of OS X. Which if this is a New iMac it should be 10.8.x.
Also why are you using iPhoto on a work computer? If you're not a photographer, or deal with images as part of your job then there's no real reason to update iPhoto. And if you are dealing with images as part of your job then you need a better image management program then iPhoto.

Frontrow under Mountain Lion it works!

A lot of people want frontrow back, which has been removed since LION.
To get Frontrow running under Mountain Lion 10.8.2: here are the instructions that worked on the two macs I tested:
Copy these files from a snow-leopard installation (e.g. your backup) to the appropriate folders in Mountain Lion:
/System/Library/CoreServices/Front Row.app
/System/Library/PrivateFrameworks/BackRow.framework
/System/Library/PrivateFrameworks/iPhotoAccess.framework
Confirm the copy process by typing in your password when required.
Open Apple Script Editor and type in:
#launch Front Row
tell application "/System/Library/CoreServices/Front Row.app"
launch
end tell
tell application "System Events"
key code 53
end tell
Save this as an Application. Store the created App in your Application folder end enjoy!
As usual, music files do not play, but all other things work beautiful. This is due to the fact that the actual iTunes Versions use a different Library format.

I just found a similar solution and was coming here to find more info.
To get Front Row to work under LION (not Mountain Lion), the following files were needed (Note: I got this info from elsewhere months ago, but I don't remember where.)
/System/Library/CoreServices/Front Row.app
/System/Library/PrivateFrameworks/BackRow.framework
/System/Library/PrivateFrameworks/iPhotoAccess.framework
/System/Library/LaunchAgents/com.apple.RemoteUI.plist
/Applications/Front Row.app
When I updated to Mountain Lion today, all those files were still in place, but the app no longer worked.
BUT... Similarly to what you found, I noticed that if I manually launched the Front Row app that's in
/System/Library/CoreServices/Front Row.app
It launched the app! - NOT the one that was in my applications folder, but the one in the above directory. Once that was launched, I clicked "ESC" and was in.
- Pretty much the same solution as above, but done manually without the applescript.
HOWEVER, I'm only able to control the app and watch movies with the keyboard. I'd like to control it with the IR remote like before, but that's not working.
Any idea how to enable that?

HT5022 Airport Utility 5.6 will not install under Mountain Lion

I have older Base Station Extreme and Airport Express models that need to be looked after; however, the fix to install Airport Utility 5.6 under Lion will not work under Mountain Lion. The installer complains that "the version of Mac OS X on this volume is not supported". So...suggestions?

That is correct. AirPort Utility 5.6 for OS X Lion will NOT install under OS X Mountain Lion. If you had it already installed, and then upgraded, it would have worked just fine.
One option, is to use Pacifist to extract the utility directly from the .dmg file.

IStat Pro location (not in widgets) under Mountain Lion?

I like and use iStat Pro. Under Mountain Lion the Processes no longer show up.
I contacted Bjango for support and they sent me an email stating that they are discontinuing iStat Pro.
I found a simple fix at http://forums.macrumors.com/showpost.php?p=15332289&postcount=20
My problem is that I cannot locate the code to change. My Macintosh HD/Library/Widgets has no istat pro. I tried Spotlight and the only istat pro that shows is the download istat_pro_4.92.zip. Is my spotlight broken? thx

Every User has and has always had a Library folder. When Lion came out, Apple decided to have it hidden because some very important files are in there and if you don't know what you are doing, you could really mess things up. If someone directs you to "/Library" or "/Macintosh HD/Library" they mean the (not hidden) system library folder. If they say "~/Library" they mean the hidden User Library folder.
Not sure how to make spotlight search the hidden folder. You can unhide it permanently by entering this command into terminal:
chflags nohidden ~/Library
After you do this, the Library folder will appear in your home folder.

IPhoto and Mountain Lion don't work together

I consistently have problems with iPhoto and my entire computer locks up and runs at less than a snail's pace. I paid $15 to install iPhoto after upgrading to Mountain Lion and now wish I had stayed with Snow Leopard and the old iPhoto. Having to type this on my iPad while I wait for something to unlock on my computer. I am merely trying to export one image to my desktop and it's taken about 10 minutes. Apple - PLEASE fix this!

There is no problem with iPhoto and Mountain Lion. You're not talking to Apple here, and as it's not happening to everybody else they're not going to fix it because you have a local problem.
If you want help try give us a full description of the problem.
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

How to print 4 up correctly in iPhoto under Mountain Lion?

Similar Messages

Maybe you are looking for