How to print a downloaded color document in black or gray scale

I have Adobe Reader 9; Windows Vista Home Premium; HP Officejet Pro 8000 Wireless printer.  I have downloaded a document that is pre-set to print in color.  I want to print it in black or gray scale.  I click on the printer icon for the printing pop up.  When I click on the Properties bar to make the request for black or gray scale, nothing happens.  What steps can I take to convert the pre-set color download to be printed in black or gray scale?  Thanks!

I have only had the experience when I have downloaded a link from within an email to my Hotmail account when the download has already been set up in color.  To date, I have not had that problem with Word.       There are specifically two situations regarding two different monthly emailed newsletters.  This is through Internet Explorer 8; Windows Vista Home Premium.  (I will not use Internet Explorer 9.  It causes blocks for routine procedures, especially involving my Hotmail account--such as not being able initially to download a normal attachment or, if downloaded, not being able to print a normal download attachment.)     However, after I sent out my request for help, I switched to Mozilla Firefox and was able to print the "color" download in black right away because the Preferences bar responded as it should.  (Through Internet Explorer 8, regarding this particular link/download/attachment, the printing pop up had a Properties bar.  However, I am aware that, in some other pop up formats, there are both a Properties bar and a Preferences bar to choose from.)       I have Mozilla Firefox as a backup because, sometimes, I have to resort to it to download email attachments (whether black or color) coming from the east coast when they will not download through Internet Explorer 8.  (I am near the geographic center of the US.)     Thank you for your interest in my concern.  I will gladly accept any advice regarding being able to print an email attachment/link color download in black when using Internet Explorer 8!  Does it depend on how the link attachment is set up or what the link attachment is??
[private data removed]

Similar Messages

  • Help! How can i print a color document in black and white?

    I have tried some of the other solutions found on Google but i still can not figure out how to print a color document in black and white on my macbook pro...can someone help me?

    One of the print dialogue options is for a black-and-white draft, for both Safari and Word.

  • HT3771 I Have a Kyocera FS-C2026MFP printer/scanner. How can I only pint the document in Black. I cannot work out how to not print in colour to save the inks!!

    I Have a Kyocera FS-C2026MFP printer/scanner. How can I only pint the document in Black. I cannot work out how to not print in colour to save the inks!!

    Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc." or "Kyocera Inc."
    http://usa.kyoceradocumentsolutions.com/americas/jsp/upload/resource/25359/0/Mac Driver3SoftwareGuide1.1.pdf
    On the printer driver documentation, Page 5, in the Imaging setting, although the options are not specifically shown, there should be an option on that screen of the print driver to click and select "B/W" or 'black and white' or 'grayscale' or 'monochrome' as Print Mode rather than the "Full Color" option shown in the illustration below.
    You access these settings once you have selected 'Print' from an app.
    If necessary, you might need to click on the 'Down arrow' button next to the printer name (OS X 10.6), or 'Show Details' button at the bottom of the print dialog box (OS X 10.8) to see additional settings.

  • How convert a color PDF File to black & white (gray scale...no color)

    How convert a color PDF File to black & white (gray scale...no color)??? creative cloud cs6... Acrobat etc

    Hi, just wanted to add my 2¢
    I've been in publishing over 25 years and live in Acrobat for making my final files. Currently with a newspaper.
    This is what we do:
    • Tool Panes > Print Production Window
    • Select CONVERT COLORS
    • Midway down under OUTPUT INTENT, check Convert Colors to Output Intent
    • In the associated drop down menu, I choose (because I'm printing on newsprint) DOT GAIN 20% – If you're working on better stock, choose a lower dot gain percentage.
    • Click OK – this will convert the file
    • Save
    Note: this affects the file you're working with. Make sure that you use this method on a COPY if you want to retain the original color version.
    I think if you compare my method to the Preflight method, you'll see a tighter contrast and better blacks. I've always felt the Preflight method left continuous tones a little muddy.
    Now if there was only a way to add that to ACTIONS...!

  • The new operating system changed the background color of the photos app from black to white.  How do I change the color back to black?

    The new operating system (IOS 7) changed the background color of the Photos App (Camera Roll) from black to white.  How do I change the color back to black?

    You can't. Sorry.
    http://www.apple.com/feedback/
    You can tell apple that you'd like it and see if they respond....eventually. (you don't get responses from your feedback mails but they have been known to issue changes that users have asked for, such as the ability to mass delete apps)

  • How to get AirPrint on iOS to print color documents in black and white?

    I use iOS 6.0.1 and I use AirPrint on my iphone4s to print documents wirelessly to my printer. The problem is that if the document that I am printing has ANY color on it at all, the printer will print that part in color. Sometimes I actually want the document in black and white only. But AirPrint doesn't give us the option to do this , like OS X for Mac does.
    Color ink is way too expensive to just be using "willy-nilly".
    Apple , give us a black and white option on AirPrint !
    Anyone know any ways around this until Apple updates iOS ?

    It might be a problem with your printer's color profile. Did you try to set the color profile in the print dialogue to "black and white" (choose: "more options" in the print panel) ?

  • How to print with NO COLOR MANAGEMENT in Photoshop CS6

    Hi,
    I have been trying to print a target from i1Profiler so I can read it with my i1Pro and create a printer profile, but no matter what I do, there is no way to get photoshop from supplying a profile while printing. I tried to select Printer handles color and then put the printer driver in COLOR MANAGEMENT OFF (seemed to me this would disable both the printer managing color and photosbop managing color). Tried printing this way ( and many other ways) but NO SOLUTION --- the prints are EXTREMELY different from the on-screen view (which is in a properly profiled Apple monitor) and they actually look like the ones with a profile chosen.
    I also tried the utility Adobe Color Printer Utility and same results!!
    I am using an EPSON Stylus Pro 7900 that I just purchased.
    Please help
    Juan Dent

    [email protected] wrote:
    Hi,
    I have been trying to print a target from i1Profiler so I can read it with my i1Pro and create a printer profile...
    The key here is to actually actually go ahead and print the target from i1Profiler to your printer...in the Test Chart panel, create the test chart and click on Print instead of Save As. As long as you have the correct page size set in the Page Setup, you should get an accurate printer target to read. Depending on how many patches you have set, it may take a few pages but they will be properly formated for reading with the i1Pro...

  • How to print a special color in a report.

    Hello,
    I'm new with BI Publisher I'm working on some reports and the user request me to print a particular color on a cell if the cell has a special condition
    Example:
    If the cell comes with 1 print green to that particular cell
    If the cell comes with 2 print yellow to that cell
    and if comes with 3 print red to that cell
    is this possible in BI Publisher? How can I do it?
    regards,
    NA

    Hi you can try in different ways one of them is below .
    <?if@inlines:number(your_field_name)<0?><?attribute@incontext:color;'red'?><?end if?>
    or you can try for entire row like below
    <?if@row:ID='1'?><?attribute@incontext:color;'red'?><?end if?>
    Check the below link
    https://blogs.oracle.com/xmlpublisher/entry/conditional_rows_and_columns
    Edited by: varma on Apr 25, 2012 2:31 PM

  • HT4356 How to print a section of document?

    How to print a section of a document ?

    It can be a pretty annoying missing feature, but third-party software is available to do this:
    Print Selection 1.1

  • How to display (not download) pdf document on web page?

    Very confused as to how to hyperlink to a word document (pdf) and have the document displayed on my web page rather than download the document...I am putting together a website for a high school cross country team and would like to make meet results available....THANKS?

    In that case, you would not create a hyperlink to it. This just enables it to be downloaded.
    It won't work with Word, so it would have to be a pdf, but you can copy and paste it into iWeb. Go to the document and press Command + C. Then go to your iWeb page where you want the document to appear and press Command + V and it should appear in iWeb. You can alter and re-size it so that it can be viewed.

  • How to print our several Billing documents in one spool request?

    Hello all,
    I encountered a problem while printing billing document.
    Currently, we only can use VF02 to change billing document's condition type and print out Billing document. It's troublesome and waste a lot of time to change output condition type in each Billing document.
    Is there a function that will list all the billing document, so we can print the selected billing document by pick this billing documents and send to printer.
    If my description is confusing, Please let me know.

    Hi, Iimnava,
    Thanks for ur reply. But there is still some problem about this.
    Let me introduce the special setting for our company's system:
    There are 2 output condition set in SAP.
    1. First one-ZD00, it will process automatically and send to a archive software. but won't print out. all of our billing document are using this output condition.
    2. Second one-ZD01, manual print out. If we need to print out the billing document, we can go to header--output, select this output condition in the dropdown list, then set sent to Local printer. save and quit. the billing document will be printed out.
    I had tried Txn VF31 and SE38.
    1. If use repeat processing method, only pull out the billing documents with ZD01 output.
    2. If use initial processing method, only pull out the billing document with output condition-ZD00 which hasn't been sent to the archive software yet.
    So I still can't reprint the billing document with Output condition-ZD00 which has been already sent to archive software.
    Sorry for the complex situation, but it's very important that we need to reprint these billing document. hope u can help me to solve this problem....

  • How do I change a color document to a grayscale document?

    I have a full color document which needs to be converted to grayscale. I do not have access to the original files from which the pdf was created. Is there a way to make this conversion in Acrobat Pro, without using another program?

    Open the Preflight Tool (Shift-Ctrl-X). Under "PDF fixups" you will find "Convert to grayscale".

  • How to re-save a color PDF as black and white

    It seems to me I was able to do this with a previous version of Acrobat, but so much has changed with the interface, I couldn't find where to do this in Acrobat X.
    I originally created a color document in InDesign and exported it as a PDF to send to the printer.
    Next thing I know, they needed it quickly changed to black and white.
    I would have saved a lot of time if I could have found how to do it from Acrobat rather than having to change everything in InDesign.

    If you mean converting color to grayscale, you can do this in the Print Production tools in Acrobat Pro (not available in Acrobat Standard). To make the Print Production tools available, click the small menu at the upper right of the Tools pane and select Print Production.
    You can either use the Color Colors tool and convert to a grayscale profile. Or you can use the Preflight tool and select the Single Fixup "Convert Color to Grayscale."

  • Photos print in three colors but no black

    Using Photoshop Elements 12 and a new Canon inkjet printer, my photos come out in three colors, but no black. I have chosen to let Photoshop manage the color, but I cannot disable printer color management in the printer preference dialog.

    Welcome to the forum.
    As your problem is a technical one, involving the printing from PsE 11, I think that you will receive quick help in the Photoshop Elements Forum. I will Move your post to that forum, and your link and any e-mail subscriptions will follow along perfectly.
    I would add a Reply with the exact Canon printer that you are using, and also the printer's driver date and version, and the driver can have great impact on how the printer performs.
    Good luck,
    Hunt
    [Moved to Photoshop Elements Forum]

  • Print to Tape color bars and black order

    Hello. i'm about to print a videoclip for a tape. my question is the following, in the print to video setup theres is the option for color bars and black.. but the color bars come first and then the black. i would like to have the black first for 2 minutes and then color bars for 30 seconds..how can i do that?

    I want full control over how things happen. As an added benefit, by keeping everything in the sequence timeline, I have the ability to use a custom countdown clock.
    x

Maybe you are looking for