How to print a five-foot-long headline in Illustrator??

I'm new to Illustrator. I am assembling a bulletin board of information and I'd like to have a large headline running approx five feet across the top. Is it possible to make one in Illustrator and then print it out on a standard laserprinter? My plan is to tape the multiple pages together to form the headline. Thank-you!

And in case you're not aware; There should be a "tile" option in the printer dialogue when printing from Illustrator. There should be an entry under the Illustrator Help menu to explain the procedure in greater detail.

Similar Messages

How to print header and footer in SET_TABLE_FOR_FIRST_DISPLAY

Hello Experts,
How to print header and footer while using the method SET_TABLE_FOR_FIRST_DISPLAY, any tips from the experts will be appreciated.
Regards,
Babu

Hi,
there are four events for printing: print_end_of_list, print_top_of_list, print_end_of_page and print_top_of_page. More information about implementing these events is in this bible for ALV:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
Cheers

How to print Header and footer in same page

Hi All,
I am using Oracle Report 10g. How can I add header and footer on same page as my body? Right now when a generate a pdf file, it is printing individual pages instead of 1 one page. Please help me.
Regards

HI
First of all,
Unless otherwise you selected some option like page break after/before - both body and header/footer will print on same page in report, so in pdf as well.
If you have difference on report and PDF that you should look into your setup.
If you want more help, please be particular on your issue
james. wrote:
Hi All,
I am using Oracle Report 10g. How can I add header and footer on same page as my body? Right now when a generate a pdf file, it is printing individual pages instead of 1 one page. Please help me.
Regards

How to print long text in scripts

plzzzzzzzzz answer this qestion
how to print long text in scripts

Hi Kranthi,
You can create Text Id and include that in your script.
For example:
/E TEXT
/: INCLUDE ZTEXT OBJECT TEXT ID ST
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

How to print a text file with long lines?

I am trying to print a text file which contains many long lines. I find that the long lines are truncated on the printouts. How do I wrap up these long lines? Could you give me some examples?
Thank you very much!

Here's an example. The "\n" makes anything after it go to the next line. I hope this helps. Look at the Private void getTable() section.
import java.awt.*;
import java.awt.event.*;
import java.sql.*;
public class LabNine extends Frame implements ActionListener, WindowListener {
     private TextField txtInfo;
     private List lstInfo;
     private Button btnAddInfo;
     private BorderLayout borderlayout;
     private Connection databaseConnection;
     Statement statement;
     ResultSet resultSet;
public LabNine( ) {
     super("Lab Nine");
     // addWindowListener to close application
     addWindowListener(this);
     // create layout
     borderlayout = new BorderLayout();
     setLayout(borderlayout);
     // create text field so the file input that is selected will be seen in here
     txtInfo = new TextField();
     txtInfo.setEnabled(false);
     Color color = new Color(255, 136, 183);
     txtInfo.setBackground(color);
     add(txtInfo, BorderLayout.NORTH);
     // create list so the file input can be populated in here
     lstInfo = new List();
     add(lstInfo, BorderLayout.CENTER);
     // create button to add selected input file in the text field
     btnAddInfo = new Button("Add Info");
     btnAddInfo.setBackground(Color.cyan);
     btnAddInfo.setFont(new Font("TimesRoman", Font.BOLD, 16));
     btnAddInfo.addActionListener( this );
     add(btnAddInfo, BorderLayout.SOUTH);
     // set frame attributes
     setSize(450, 250);
     setResizable( false );
     show();
     // get the table/ get the query
     loadConnection();
     getTable();
public void actionPerformed(java.awt.event.ActionEvent e) {
     // if add button is pushed then it will check to see if an item was selected.
     // if not, then an error message will be displayed else the selected item will be in the text box
     if ( e.getSource() == btnAddInfo ) {
          if ( lstInfo.getSelectedIndex() == -1 ) {
               System.out.print( "You have not selected an item" );
          else {
               txtInfo.setText(( lstInfo.getSelectedItem() ));
private void getTable() {
     try {
          String query = "SELECT FIRST, LAST, EMAIL FROM Names";
          statement = databaseConnection.createStatement();
          resultSet = statement.executeQuery( query );
          while ( resultSet.next() ) {
               lstInfo.add( resultSet.getString( "FIRST" ) + " " + resultSet.getString( "LAST") + " " +
                    resultSet.getString( "EMAIL" ) + "\n" );
          statement.close();
     catch ( Exception e ) {
          System.err.println( e );
private void loadConnection() {
     // define the data source for the driver
     String sourceURL = "jdbc:odbc:people";
     String username = "";
     String password = "";
     // load the driver
     try {
          // load the drive class
          Class.forName( "sun.jdbc.odbc.JdbcOdbcDriver" );
          // create a connection through the drivermanager
          databaseConnection = DriverManager.getConnection( sourceURL , username, password );
     catch( ClassNotFoundException cnfe ) {
          System.err.println( cnfe );
     catch( SQLException sqle ) {
          System.err.println( sqle );
public static void main(java.lang.String[] args) {
     LabNine aLabNine = new LabNine( );
public void windowActivated(java.awt.event.WindowEvent e) {
public void windowClosed(java.awt.event.WindowEvent e) {
     // closes the application
     System.exit( 0 );
public void windowClosing(java.awt.event.WindowEvent e) {
     // closes the application
     System.exit( 0 );

How to print long text in ALV

i want to print a description in text mode which is 5-6 lines some times it have a blank line also so
how to print in ALV .i m using READ_TEXT function but sumtime it not works when text exceed 4-5 lines
what i sud do.

hi,
there is another way u can use yours internal table field like long text field. that is.
parameters: salno type vbak-vbeln.
data: begin of itab occurs 0,
vbeln type vbak-vbeln,
matnr type vbap-matnr,
longtext type thead occurs 0,
end of itab.
data: itabstxl type standard table of stxl with header line.
select single vbakvbeln vbapmatnr into (itab-vbeln, itab-matnr)
                                 from vbak inner join vbap
                                   on vbakvbeln = vbapvbeln
                                    where vbak~vbeln = salno.
    select single tdobject tdname tdid tdspras from stxl
                                                 into (itabstxl-tdobject,itabstxl-tdname,itabstxl-tdid,itabstxl-tdspras)
                                                       where relid = 'TX'
                                                        and tdobject = 'VBBK'
                                                        and tdname = salno    "YOUR OWN TDNAME e,g
                                                        and tdid = 'Z003'
                                                        and tdspras = 'EN'.
call function 'READ_TEXT'
exporting
CLIENT                        = SY-MANDT
    id                            = itabstxl-tdid
    language                      = itabstxl-tdspras
    name                          = itabstxl-tdname
    object                        = itabstxl-tdobject
ARCHIVE_HANDLE                = 0
LOCAL_CAT                     = ' '
IMPORTING
HEADER                        =
tables
    lines                         = itab-longtext
EXCEPTIONS
ID                            = 1
LANGUAGE                      = 2
NAME                          = 3
NOT_FOUND                     = 4
OBJECT                        = 5
REFERENCE_CHECK               = 6
WRONG_ACCESS_TO_ARCHIVE       = 7
OTHERS                        = 8
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
break abaper.
I HOPE THIS WILL SOLVE THIS WILL SOLVE THE PROBLEM OF THE OTHERS AS WELL.

How to print date/time in report page footer?

Hi
I have a report which users can print as PDF.
However, I like to display current date/time in report footer.
I can see the Page Footer in section but can't figure out how to print date/time there.
Thanks for help.

hi movilogo
Please try this.
Create hidden item P1_DATE
Create On load process in page 1 and put this code
begin
:P1_DATE:=TO_CHAR(SYSDATE,'DD-MON-YYYY HH:MM:SS');
end;
Open your region in Page 1 put this code in Footer area
*&P1_DATE.*
Refresh your page.
you will get the output like this.
16-SEP-2009 11:09:17
thanks
Mark Wyatt

How print ADDRESSbook simple list? Everything prints scewd right &too long

I'd liike to print out a simple list of names, phone, addresses from my mac AddressBook. Can't I design the layout? Prints first left 1/3 column jjust phone number, center column just name, and all the other info squeezed at the riight margin with several fields that take up space verticle so I can only print sometiimes maybe 4-6 names a page. If i had a lot of notes in the person's 'NOTES' section of their AddressBook page, it will print out everything, even a couple pages. How not print thhat? I want a simple abbbreviated, short list to carry with at least 10-14 names, address,phone,email, etc on each page.
I'mm sure the annswer is around here somewhere, iif only i knew where.
Thanking you foor your help and time.

Hi thelnukus,
Are you saying that you see the list correctly but it is printing in a vertical format albeit somewhat skewed?
I'm not an expert with printing the Address Book in "list" form but have you tried creating a PDF first and then printing that? You do know that you can select/deselect what you wish to include in the list from the "attributes" pane?
My method for printing a list is this:
1. Open Address Book
2. Select in the "Names" column the names that I wish to print a list of.
3. File Menu>Print
4. Select/deselect addresses/email etc. from the attributes pane that you do not wish to include in
the list.
5. Select other features I want such as Font size (regular/large) from the pop up.
6. Select Print (or if that does not work select Save as PDF and then print that).
post back if this doesn't help and try to explain what you are seeing exactly.
littleshoulders

Error message "Page header or footer longer than a page"

Hi
Our application call crystal report to generate/display crystal report in PDF format. We have a dev system to test this, all looking good, however when we moved to production server, the attached error message is displayed when running crystal report.
Invoking method GENERATEREPORT returned error Page Header plus Page Footer is too large for the page.
Error in File C:\DOCUME~1\SERV
IC1.LIM\LOCALS1\Temp\temp coq new xxxx.rpt:
Page header or footer longer than a page.
Same report doesnu2019t get this error message if running it from crystal report developer.
Not all crystal reports got this error, but some of reports display strange view in PDF, the content of report are reduced in a paper size like label size, not A4 size. I have checked the default printer on the server, it points to a normal window printer, not a label printer. I have checked all possible settings on production server and compared with dev server, all looks same to me
I suspect the label printing size is used somehow when the report is previewed in pdf format, not normal A4 size although I have selected a normal window printer as a default printer on the window,what else should i check?
Could you please shed some light on this?
Thanks!
Li

I found the issue is from label printer that is setup on the production server. After I removed the label printer from the server, then error message is gone, all report running fine.
This label printer is not the default window printer, it is a network printer but is configured as a printer using local port on the server.
I think for some reasons, crystal report alway picks up the label printer page size, not the normla page size, I am not sure why and how crystal report do this, it should pick up the default printer, which is a normal printer.
There is no error when I run report within CR. The error happens only when I try to generate crystal report from our application.
I do have logo in page header/footer, subreports in report footer, but I don't think they cause the problem, because I can run same report without any problem in dev system.
Any idea what I should check next?
Thanks

How to print header in first and last page only in SAPSCRIPT

Hi!
How to print header in first and last page only in SAPSCRIPT,
in between pages, I need to print all line items in MAIN window only .
Thanks in anticipation!
Aki.

Hi All,
Thanks for your early update...but my requirement here is
I have two pages (FIRST , NEXT ) First is having Header, Main and Footer
NEXT is having Main and Footer ..I am printing PO here..let us think that my PO is having 20lines items , let us assume that it takes five pages...
Now how application is printing is ..first set of data is printing in FIRST page and remainiang data distributed to 4 pages printing in NEXT page ..but what my requirement is , I need fifth page print on FIRST page, instead of NEXT page... Ultimately I need last set of data always print in FIRST ie out of 5 pages 1st print on FIRST 2nd 3rd 4th print on NEXT and 5th print again on FIRST .
hope you this will clear you.
Thanks!

How to print system-time in XML?

Hi,
Please help me how to print system-time in XML. Like we use sy-uzeit in ABAP.
Can we use anything in XML too..
Thanks & Regards,
Sai

hi movilogo
Please try this.
Create hidden item P1_DATE
Create On load process in page 1 and put this code
begin
:P1_DATE:=TO_CHAR(SYSDATE,'DD-MON-YYYY HH:MM:SS');
end;
Open your region in Page 1 put this code in Footer area
*&P1_DATE.*
Refresh your page.
you will get the output like this.
16-SEP-2009 11:09:17
thanks
Mark Wyatt

How To Print Field Value in TOP-OF-PAGE During Line Selection.

How To Print Field Value in TOP-OF-PAGE During Line Selection when double click on field.

(If my memory serves me well (not used for long time ago)
Assign values to system fields sy-tvar0 - sy-tvar9, they will replace the placeholders "&0" through "&9" in the list headers and column headers.
TOP-OF-PAGE DURING LINE-SELECTION.
WRITE: / 'Interactive Report &3'.
WRITE record-vbeln TO sy-tvar3.
Regards,
Raymond

How to Suppress Header and footer.

Hi,
I have master-Detail report. Report prints One master and all detail records on a page. If detail records are more than to fit on one page, report prints master gaian on next page followed by detail records. For a master record If there are no detail records, I supress the master record also using format trigger.
My problem is how to suppress the Header & Footer information that has to be printed on each page otherwise. When I suppress printing of master, All I get is Page header and footer. This happens only to the master records that fall in between. The pages related to last master records are not printed.
How can I suppress printing of header and footer on blank pages.
Thanks

Thanks Santa & Rohit,
As santa has suggested, I am already suppressing the printing of master record and its column headings based on the count of number of deatil records. If count of detail records = 0, I am suppressing master record.
The problem is with Report header (TITLE etc.) and footer. I have to print TITLE and FOOTER on each an very page. So I have put these into Margins. The Count of master records at the report level, can be used to suppress the master records column headings and also TITLE and FOOTER. So if there is no master records, report does not print anything and that is fine.
Problem comes when there are some master records with "No" detail records. Something like:
-M1
----D1
----D2
----Dn
-M2
----D1
----D2
----Dn
M3
M4
M5
----D1
----D2
----Dn
M6
M7
M8
My report now produces pages for M1, M2 and blank data area (with Title and Footer) for M3, M4 and the M5. It suppresses pages for M6, M7, M8 etc. So if a master record has no detail records, but happens to be the last records that suppresses the TITLE and footer also.
Any Ideas how to suppress TITLE/FOOTER for M3 & M4.
Thanks

How to create Header and Footer template

Hi,
I am wondering if this is possible, if yes , can some help me please?
At present we have preprinted stationary for invoices and now the plan is to get rid of preprinted stationary and print header and footer via oracle reports directly. The address on header has to be dynamic because our organization has multiple offices across various countries. I am wondering if its possible to create a separate report only with a header and footer and reference it in other reports so that when printed both are merged and presented as single invoice. My reports knowledge is around basic level but i am good at plsql , if someone hear can please guide me HOW TO implement this logic I will be very grateful.
We are using Oracle reports 6
Thanks
Aali
Edited by: aali on 05-Jul-2010 05:44
Edited by: aali on 05-Jul-2010 06:09

Hello,
You can set the header and footer dynamically.
In the report layout section. There is one option called Edit Margin beside the Help iconic button.
When you will press that button Edit Margin it will open for the new look your report fields and frames inside the black dense lined frame. So at the top of that main frame you can set the Header and same at the bottom you can set the Footer.
And in your case if you want to set dynamic. Then while running the report. Send the dynamic values into the parameters and when you will create field in layout section Header/Footer then set the source as parameter which you passed. So, it will change dynamically.
-Ammad

How to print multiple footers for each page in RTF template xml report.

Hi,
How to print multiple footers for each page in RTF template xml report.
i am able to print ( two sets ) ...
up to last page ( one template ) and for last page ( another template).
i want to change the footer information based on the group value printed in the report ( it might be 5 to 6) In every report run.. can you please check and let me know do we have any feasibility to achieve this.
Thanks in advance.
Regards,
KAP.

You can remove all other logic, like last page only contents (start@last-page:body), etc and section breaks if any you have inserted manually.
Just have for-each@section logic.
It would be difficult for me to guess what you have done without looking at your RTF or describing here.

How to print a five-foot-long headline in Illustrator??

Similar Messages

Maybe you are looking for