How to print a PDF form content when i have the content

Hi SAPGURUS,
I have an urgent requirement.
I have the content of a PDF form in raw format and it is saved in some repositry .Now How can i create a spool request and print the form.
I can use the function module FP_JOB_OPEN and then gat the dynamic function module name and then close it by FP_JOB_CLOSE .
But as i already have the PDF form content i need not create it again by calling the dynamic function module.And i can't do so because both applications are altogether separate from each other that is creation of the PDF form and printing it.
Could you help me in guiding the way to solve this problem.
Thanks in advance
Sanjeev

Hi Sanjeev,
I have currently the same issue, please have you solved it?
Thank you
Tomas

Similar Messages

How to print in PDF Form

Hi all
May I know how to print Shipper's Letter of Instruction (SLI) (Foreign Trade) form in PDF format? User should be able to select 'FUSI" as output type when they print Billing Ext Trans (VF02/VF03). Must be in PDF format.
What programme can I reuse to call adobe_document function?
Thanks for your help.

check this
Re: how to convert po to pdf
Regards
Prabhu

How to make bookmark tree open dynamically when moving in the content?

Intro: When viewing a PDF-file with a bookmark tree, I can unfold(open) nodes in the bookmark tree and make the view window jump to the corresponding destination.
If the bookmark tree is open (unfolded) I can observe a selection mark moving downwards in the bookmark tree as I move down in the content.
Question: Is it possible to make the folded bookmark (outline) tree open dynamically as I move down in the content? I would like to see the bookmark tree unfold automatically and move the highlight to the bookmark (outline) node for the bookmark position nearest to (above) the view point in the content window.

Dave,
thank you for quick and precise answer.
Magne

How do I merge PDFs into one. I have the PDF pack. iOS

I bought the PDF pack so I could merge PDFs from my email together with an excel page. I seem to missing something to be able to get a complete PDF without having to print and scan. Any ideas?

Hi AFO77515,
When you use Combine Files to PDF, Adobe PDF Pack stores just the combined PDF file, not the files from which it was created.
Click Combine Files To PDF.
Click Select Files.
Select one of the files that you want to combine.
Click Open.
Click Add Files and select additional files to combine. Click Open.
(Optional) Click the arrows next to the files you’ve selected to change the order in which they are added to the combined PDF.
Enter a name for the combined file, and then click Combine.
Note: You cannot combine PDF files that are secure, password protected, 3D, or part of a PDF Portfolio.
If you are unable to follow the above mentioned steps then please let me know the error you get.
Regards,
Rave

How to make a PDF form call Web service and return a static pdf for user to print?

Hi all,
Can anyone help me regarding the feasibility of using PDF forms for my following case?
I would like to create a Dynamic pdf form. User only have the Acrobat reader. they can enter some information. Then have a submit button. when user click the submit button, it can call the web service with data. then Web service returns a Static PDF document based on data and the user can print it out. (and maybe save as separate pdf file)
1. Is that possible to implement? Because I know PDF can call web service, but dont know how it handle when the webservice returns another static PDF document. could it able to handle the responds and open up in another acrobat reader?
2. As I understand I need to have Live Cycle Designer to create a pdf and make it Reader Enabled. So user can user reader to call webservice? am I correct?
3. What minimum reader that user need to have? PDF reader 7 or above?
4. I have a webservice serve the same purpose for web. But if I want the same web services can serve both web and PDF form. So, whatever client (PDF or Web)make the web service call, server returns the PDF document to client. Is that possible ? Do I need to make any changes on web service?
5. Do I need to get any other Adobe server product? (other than Live Cycle Designer )
Thanks a lot

We have done a similar approach in the past and yes, it can be doable.
1. Is that possible to implement? Because I know PDF can call web service, but dont know how it handle when the webservice returns another static PDF document. could it able to handle the responds and open up in another acrobat reader?
Srini: We have developed a Servlet to talk to Webservice. Based on the Webservice response, the Servlet, prepares the Byte stream and sends it to Webbrowser to display as a PDF. The PDF data was submitted to Servlet in XML format.
But if you do not want to use the above approach, then you have to use the Workbench Process.
Submit the PDF data to a Workbench process and the inside process, execute Webservice Service with the data. Once the response is received, prepare the data XML and render a PDF with it.
To do this, you need LiveCycle Server and Reader Extensions server component.
2. As I understand I need to have Live Cycle Designer to create a pdf and make it Reader Enabled. So user can user reader to call webservice? am I correct?
Srini: If you want to use the Servlet, you can Reader extend the PDF with Acrobat.. But if you want to submit the data directly to Webservice, then you need Reader Extensions server component.
3. What minimum reader that user need to have? PDF reader 7 or above?
Srini: Not sure but Reader 8 and above should work.
4. I have a webservice serve the same purpose for web. But if I want the same web services can serve both web and PDF form. So, whatever client (PDF or Web)make the web service call, server returns the PDF document to client. Is that possible ? Do I need to make any changes on web service?
Srini: If you use the Servlet approach, then you can re-use the same webservice. But if you want to submit directly to the same webservice, you may need to change it to suit your data XML.
5. Do I need to get any other Adobe server product? (other than Live Cycle Designer )
Srini: If you use the Servlet approach, you do not need any server component but other approach, you need Livecycle Server and Reader Extensions server component.
Thanks
Srini

I filled in a fillable pdf form and when i print it, the text in the fillable section gets cut off.

I filled in a fillable pdf form and when i print it, the text in the fillable section gets cut off. What do I need to do to get the entire text to be printed. Any help is appreciated.
Thanks

What has this to do with Pages? You probably did this in Preview.
Peter

Is it possible to designate stapling when printing a PDF form?

I am using Adobe Lifecycle Designer (ver. 10.0.1029120306.1.870331) to set up a new report for an SAP application. I can certainly designate duplex printing from within the form by using Form Properties and the PDF Print Options, but no stapling option can be found. Is this possible? Is there a way to set this up from within the PDF form? If not within the form, what have others found to work for their environment? We are using Xerox GPD PS printers here and they certainly offer the stapling feature.
Thanks for any suggestions...Pat

OK...it has been a wild ride, but between our Basis team and the Server team (which handles our printer drivers), here is what they came up with to enable this feature. They really put in the time to figure this out. References to PRD in this document is a reference to our production machine. ZPMLOCL is a printer type used by our users for printing these work order forms. A lot of effort was also given to make sure the driver on the printer supported the stapling feature (most do anymore). This effort is to not only allow stapling, but to also eliminate the pesky banner page which can suddenly start printing with these changes. We are using Xerox printers in our evironment.
Steps for Basis Portion of PRD change on the - Standard Work Order Form - shop paper document
(STMS) Transport device type ZPMHPLJ4 to PRD with Transport
SPAD
Change device type of printer ZPMLOCL from SAPWIN to ZPMHPLJ4.
Click on access method tab and change access method to G: (Front End Printing with Control Tech).
Confirm the "No device Selection at frontend" checkbox is selected.
Hit the Save button.
Copy zpmhppcl5e.xdc file from AD1 to ADS, in the location below.
4. SA38/SE38* run program RSPO0022 on PRD and Check to see if transport from step 1 moves the assignment below.
If not create assignment the same as in the red box below.
5. Finally, stop and then start the XML Form Module Java Service in ADS.
I have no other notes on this setup. I hope this helps you in your efforts to get the stapling feature up and running on your system.

How to receive fillable PDF forms from clients & be able to save them?

Hi everyone,
So I have been having trouble with this for a while now.
Basically for work, my assignment was to create a PDF that could have fillable forms and a button at the bottom of the page sending to my coworkers' emails.
How it would work: Once a person fills out the form and presses the send button at the bottom of the PDF, it would send to my coworkers' emails and they could save the documents with the fillable data.
Everything works except for the saving process. Once my coworkers receive the email, they get different error messages that look like the following (and they CANNOT SAVE the PDFs... so it makes the whole idea worthless):
Here is how the messages read:
1) First image on the left: the box reads "Save a Blank Copy of this Form"
underneath it it says "Data typed into this form will not be saved. Adobe Reader can only save a blank copy of this form.
2) 2nd image: the box reads "Sending Data Files by Email"
underneath it says "Please note: This form contains an email submit button. Clicking this button will email a data file containing data you type into this form. However, the form itself will not be sent. Remember you cannot save a completed copy of this form with Adobe Reader 9 or later.
3) 3rd image: reads "the file you are attempting to open contains comments or form data that are supposed to be placed on. This document cannot be found. It may have been moved, or deleted. Would you like to browse to attempt to locate this document?
So, I was wondering if there is any way around this. Is there away to have the PDF sent back to my coworkers so they can then save the FILLABLE PDF and organize it in a folder.
If there isn't... then is there a way to have it send back to my coworkers and have them print out the fillable PDF and organize the PDFS coming in that way?

Yes, you just need to Reader-enable the document, which will allow Reader to save the complete PDF form. When you set up the Submit button, choose the option that sends the complete PDF, as opposed ot just the form data (FDF, XFDF).
To Reader-enable a document in Acrobat 10, select: File > Save As > Reader Extended PDF > Enable Additional Features
Do this as the final step when preparing the document to be sent out.

How to add Predefined PDF Form as a Template in BIP - 11g

Can anybody please help me to understand how to add Predefined PDF Form as a Template in BIP - 11g and how to map the Form fields with the Data Elelment.
I tried it with 10 g set up as well, but I found following things
1) PDF form template mapping was only available whenever we provide sample data with the same filed name and also number of fileld should be same.
2) According to user manual that I have, it says that whenever I click on the form field while mapping the form field data elements, it should open a new window having the corresponding mapping details.
But in my case no new window was opened when I clicked on the form field while mapping.
Please help me out since i am beginner with BIP and have to move forward with Predefined PDF Form as a Template in BIP - 11g.

I am new to BIP-11g. But i have created rtf, pdf templates in 10g. I am migrating reports to 11g. If you know How to add Predefined PDF Form as a Template in BIP - 11g , Please let me know.
In 10 g you need to do the following things
1. First you need to create data template.
2. Then you have to upload pdf template.
3. After you have uploaded the pdf template, Map Form Fields tab will appear. Then you can map the form fields.

How to print a pdf file from Labview

Hi,
Does anyone know how to print a pdf file form Labview. I need to be able to point on the pdf file and to print it.
Activex examples doesnt seem to be working it always displays an error, on every PC that I tryed to run it.
{"code 3005" ,,,"Automation Open: Object specified is not creatable in Display PDF in Dialog.vi"}.
Thank you for your help.
Regards,
Jenia.

You can use the "System Exec.vi". The command line should have the following structure:
"<Path to AcroRd32.exe>" /t "<Path to document>" "Printer name"
For example"
"C:\Program Files\Adobe\Acrobat 5.0\Reader\AcroRd32.exe" /t "C:\myreport.pdf" "Tektronix Phaser 300i"
Regards;
Enrique
www.vartortech.com

How to create a PDF form which can be filled out and saved with change by end user

I am using Acrobat 8.0 - Mac - and want to create a PDF with text form fields. Simple one page file. The end user needs to be able to fill out the text form fields and SAVE those changes. so far they can fill out the fields but can not save the file with changes.
Thanks

Sandee Cohen wrote:
Phillip Jones said:
After the uproar from Users about Standard being little more than Apple's Print to PDF; there hasn't been a Standard version for Mac since version 6. So many people were use the features in Acrobat 5 to create Forms that could be filled out by Reader. when the bought 6 Standard they were ready to hang the CEO of Adobe in effigy. When 7 came out is was Pro only.
I'm confused.
The current version of Acrobat comes in Standard, Pro, and Extended Pro versions. Only the Pro version is on the Mac. But that doesn't mean that the Mac community wouldn't have wanted the Standard version of Acrobat.
The Standard version is hardly a mimic of Apple's Save to PDF. The most important features of Standard is to enable Rights in Reader as well as add comments, form fields. etc.
The only thing that Standard does do are the pre-press and production features of Pro.
However, given the difference in price ($450 vs. $300) there is ample reason for business on the Mac OS to buy Standard--if they could buy it.
I didn't say PC users.
I should have said Mac users. Because the Print system and sytem by which Mac users view anything is based on the PDF engine. The Mac sytem can do anything Standard Standrd could do. although in order to placate Adobe the pdf engine used is a version or two behind. If the Mac OS could do everything Acrobat could do there would be no reason for Adobe to provide Acrobat Or Reader for Mac.
And you basing your assumption of what Standard can do a PC. Standard on Mac is basically Mac's Print to PDF wrapped in an Adobe Package. It shad no ability to confer rights to reader (that didn't come to Acrobat Mac until Version 8) and was unable to to create forms. The current version of Acrobat PC comes as Standard, Pro, And extended. There never has and never will be an extended pro version for Mac (that adds the ability to create XML based forms) They don't have the interest. To adobe is little more than a Play toy. Because Windows has so much clout They can dictate what they want. Apple not so much. One advantage Mac does have is that Forms creator is built in. on PC its an adon (it free but an addon or was).
Now back in OS 9 days and Acrobat 5.x Acrobat for Mac and PC were equal. except to have the print press features Mac users had to pay an addition $200.00. (It exactly as you described in your last sentence - except Acrobat 5.x without the printpress and The Acrobat 5 without Print press was $299.00 and $499.00 with Print press.) I know I've used Acrobat since version 3.

How to print a pdf file on a servlet

Hi,
I have a question, is it possible and how to send to a local printer a pdf file with a serlet ?

the lengthy thread on this topic from "advanced language topics" seems to have been lost in the renaming. There's a lot of discussion there so it may be worth your doing a thread search for "printing" and "binary" together as they formed part of the thread title.

How to print a PDF with equal white borders

Hello,
When I print my flyer the white borders on the top and bottom are unequal. How do I make it so all 4 sides have the same width for the white border? The print preview is unequal too.
Thanks

Thank you Michael
My problem is, I need to print the document with the mm items. I work
in a print & copy shop, we must deal with whatever the customers send
us.
I actually stumbled around and found I could do it with the MultiMedia
Flash Tool, editing the poster options. It's a tedious process though,
and I'd like to find a way to set this for the whole PDF file at once.
If you know how to do this I'd appreciate the info.
Thanks again,
Mark

Image won't print on pdf form.

I copied an image (jpeg) onto my pdf form. When I print the form the image doesn't print. The handles around the image are blue instead of black. Can I somehow embed this image onto the form?

kreichrt,
I would suggest re-regestering the NI-Reports DLL by:
Start » Run, then type regsvr32 "C:\Program Files\National Instruments\shared\NI-Reports\NiReports.dll". If this does not help, please provide more information on you version of LabVIEW, operating system, and if the shipping examples that come with LabVIEW work correctly.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

When i have downloaded a pdf form i cannot type in the fields marked

when i have downloaded a pdf form i cannot type in the fields marked

Perhaps the fields aren't fillable -- are you seeing a purple message bar across the top asking you fill out the form? Here is a quick video that explains the messages you should be seeing in your form - Quick Tip: How to enter form data using Adobe Reader.

How to print a PDF form content when i have the content

Similar Messages

Maybe you are looking for