How to Print a report with 50 columns. Crystal Reports

Dear Experts,
I'm Using Crystal Reports 2008. I have a requirement that 50 columns should be placed in a Single Report with single line . But Page size should be A4 ( While Printing).
With Page Size A4 I'm able to place 5 columns.
Is there any possibility to acheave this no matter if number of opages increases
I Appreciate for the help in this regard.
But I need to display all the 50 fields (columns) in a single report.
I Achieved this by changing horizontal width to 70.
I can Place all the fields in one line.
But my concern is to print this report in A4 Paper I think its horizontal width will be 11. from crystal reports itself
I don't want to use cross tabs nor even use sql expression. Its just a simple display report for all the employees.
is there any simple way out to Achieve this by paging... or any other method.
Any help regarding this issue will be appreciated.
Thanks

Hi:
   I'm not a expert in crystal report, but I would like help you, i don't understand if must to show 50 diferrents fields in your report or same field through 50 columns ? for exemple:
first case: You ned diferents fields
F1                F2                 F3                 ... F50
item1 F1      Item1 F2         Item1 F3       Item F50
item2 F1      Ite21 F2         Item2 F3       Item F50
In this case you must put the 50 fields in the report, just enough small to fit page
second case: You nedd the same field in 50 columns
Colum 1      Colum2      Column 50
item 0          item 11      item 490
item 1          item 12      item 491
item 2          item 13      item492
item 10       item 20      item 500
inm this case i haven't idea how to make it (sorry)
Edited by: Wgramirez on May 29, 2010 7:01 PM

Similar Messages

Need help to develop report with column chart

Hi
I am new to SAP BO world.Could anyone please help me to design report with column chart.Please guide me how to develop report for the following requirement.I am not aware of variance columns and variance labels.Please provide some guidance or some tutorials(for column Chart) so that I can complete the task. Please reply me as soon as possible.Waiting for reply.Thanks in advance.
Type: Column Chart
u2022     Rows: Banking Asset Margin (%)
u2022     Start / End Columns: PY YTD Act(Prior year year to date); CY YTD Act(Current year Year to date)
u2022     Variance Columns: # Var (CY-PY Act) for GOLM; Volume; Rate; Non Banking NII; Banking Volatility in NII; Banking Volatility in OOI; Fees/One Offs/Other; Volatile Items; Sophie
u2022     Sub-total columns: PY YTD Underlying; CY YTD Underlying.
u2022     Variance Labels: % Var (CY-PY Act) for Total Income and Underlying Income
u2022     Sub-Total Labels: # Var (CY-PY Act) for Net Insurance Income; Banking Volatility; Other Operating Income
Additional information
u2022     Variance columns (bar) colours: Red = Adverse to Prior Year; Green = Favourable to Prior Year
u2022     Columns to show values. Adverse values to be shown in red text in brackets. Favourable results in black text.
u2022     All values in Black, but adverse to be shown below the bar.

Hi,
This type of question is almost impossible to answer over a forum .
You need to work with your business to understand what these requirements mean in terms of data modelling and relationships between object entities.
- Some of these metrics should be delegated to source, and calculated in the update routines to your datatargets (aka Cubes/Tables)
- Others could be resolved in the semantic layer (Universe)
- Other will be calculated in the presentation layer as local formulae or variables.
whilst BusinessObjects is a fairly intuitive tool, it may be unreasonble to expect a new learner to deliver an advanced report with conditional formatting.
Regards,
H

How to add/create additional page in Crystal Report Layout SAP B1

Hi,
I wanna ask about How to add/create additional page in Crystal Report Layout SAP B1 ?
I want when user print Purchase Order then on last page also print some page like Penalty Clause etc.
Pls help me to find the solution.
Br,
Thomas Marsetyo

Hi,
In your report footer, set it to create a new page before it is printed (In 'Section Expert', select the Report Footer -> 'Paging' tab -> Check 'New Page Before' checkbox). Throw your Terms & Conditions into the Report Footer section.
If you already have a Report Footer that you want to keep, just split the footer into two sections (Right-click the Report Footer section -> 'Insert Section Below') and follow the same procedure for the newly created section.
Check this Link
http://stackoverflow.com/questions/9232239/adding-an-additional-page-to-end-of-a-crystal-report
http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=18960
Regards,
Manish

How to print page no/total pges in report programing?

how to print page no/total pges in report programing?

Hi
This is an example:
In TOP-OF-PAGE you can write:
WRITE: SY-PAGNO, '/', '-----'.
When the program has finished to print all data, run a routine like this:
Declare a variable
DATA: L_PAGE_COUNT(5) TYPE C,
      V_LINE TYPE I. "The line where page number is written
* In my example I suppose the page number is always
* written in the first row of the page.
V_LINE = 1.
* Copy this code to the end of program
* Page count will be printed on each page here
WRITE sy-pagno TO l_page_count LEFT-JUSTIFIED.
DO sy-pagno TIMES.
    READ LINE V_LINE OF PAGE sy-index.
    REPLACE '-----' WITH l_page_count INTO sy-lisel.
    MODIFY CURRENT LINE.
    ADD 1 TO sy-index.
ENDDO.
Max

Print Issue in VS 2010 Crystal Report Version 13.0.1.220

Hi Friends,
I am new user for SAP crystal report,
can any one help me for
Print Issue in VS 2010 Crystal Report Version 13.0.1.220

Font must be True Type and on the WEB server where the report is being processed.
Run Process Monitor and see if your app is loading the Font....
Typically if the characters show up as a box it means either the font you are using does not support UNICODE characters, it's not installed so font substition is done but the font used doesn't have the Glyph's required or there is a permission issue with the font being instlaled under a local User account and should be installed under the Admin account.
Also, Search for Font and Windows Framework, there are known limitations with .NET Framework and some fonts.
What font are you using?
Don

Performance problem with Orcacle / Crystal reports 8.5 / ASP

Hi,
I have a performance problem with reports running crystal reports 8.5 with oracle databases.
Fetching data appears to be slow. Oracle trace reports (tkprof) shows that fetchsize=1.
Fetchsize in Oracle ODBC is 15 (default).
How can I update te fetchsize in crystal reports?
I would appreciate any help.

CR XI R2 is also still available for purchase. This is the last version of CR to use the RDC. Contact sales at 866-681-3435.
Make sure the installed versin is 11.5.12.1838 - if it is not, apply SP6:
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
MSM:
https://smpdl.sap-ag.de/~sapidp/012002523100000634032010E/crxir2sp6_rdc_mm.zip
- Ludek
Edited by: Ludek Uher on Jan 4, 2011 10:05 AM

Does anyone have a report using cfdocument that produces a ledger type report with column headings?

I need to see some sample source code of a report with column headings and detail data. I can't get my column titles in the header to line up with the detail no matter what I do. Can anyone spare me a good sample?
I have tried to use tables to specify both col headings and detail, but no chance to get them to line up. There has to be a way. I can't use the report builder because I need more control of when page breaks print, what data is on each line, etc. Hopefully some kind soul out there has a good sample.
Thanks!
Dave

Your MBP is actually a mid-2010, not a 2008. That's what the 6,2 model indicates.There's an issue with the graphics module on that machine. There was a program in place to replace the motherboard within 3 years of purchase, but you're probably outside of that. Some folks have supposedly gotten theirs changed outside of that period, so you can try.
http://support.apple.com/kb/TS4088?viewlocale=en_US&locale=en_US
What you can do to use it is download gfxstatus from http:gfx.io and force the graphics to Intel. That would affect your work with Final Cut, but at least you might be able to use the machine.

Deploying Crystal Reports with IIS - Load Report Failed

Post Author: jeremyrarextreme
CA Forum: Deployment
Hi
We have installed Crystal Reports Developer XI release 2 with Visual Studio 2005 to implement a very simple app that allows a crystal report to be loaded via the web. This works perfectly fine when I publish my build from Visual Studio 2005 (using the built in cystal controls) and go view in browser.
Everything looks fine when I run the app from Visual Studio by clicking view in browser - the crystal report loads and everything is how it should be.
When I publish the build on our production server (a Windows 2003 server running IIS6) I get the error: Load Report Failed
A full detailing of this error can be found on this forum post: http://aspadvice.com/blogs/rjdudley/archive/2005/05/18/2591.aspx
where many other people are having the same issue.
I have struggled for a very long time to find a solution to this, how do I resolve this issue?
when I try to view the .net 2.0 project from a browser running through IIS It displays the business objects toolbar but returns the error: Load Report Failed
When I run this in my development environment directly from Visual Studio 2005 it works perfectly fine and loads the report.
The report path is perfectly fine and correct, we have permissions on all folders for read, write and execute for both general user / admin accounts and IIS accounts on the Windows 2003 Server.
We also have full permissions on c:/temp and c:/windows/temp
What else can I do to make this work!
Many thanks and awaiting your reply

Post Author: mikeeby
CA Forum: Deployment
Yes I too have been fighting this problem. I was using a XML Data file and schema file for my u201Cdatabase templateu201D in the report. I would then run my query using the .NET SQLClient then fill the report with my dataset table using the SetDataSource method from the ReportDocument object.
I tried both embedded and runtime loaded reports all worked fine on my development machine but would NOT work on my production server. I use all the server installs, played with user rights, registering DLLu2019s still nothing. I went as far as creating a winform app to fix the problem. I then had exactly the same problem, I was catching the error and it originated from the viewer control in both winform and webforms.
What finally worked for me was to attach to the database using OLE DB instead of XML/schema (xml/xsd) datasource then pasting my SQL Query into the database connection command this gave me the fields to build the report. I actually used the u201CSet Database Locationu201D Dialog in Crystal Reports so I didnu2019t have to redesign my report. This dialog works very weird but I managed to figure it out. I then used an embedded report and all seem to be well. I think there is a problem with the Crystal Reports .NET Server Install and Merge Modules used with .NET with XML files, but I cannot be sure, all I know is this worked for me.
I am concerned that if my database server is moved or renamed my report might break because the server connection is embedded in the report, but for right now it is working. I thought that was the reason for using the xsd file was to eliminate the dependence on a server connection in the report.
Good luck and I hope this helps you fix your problem too. If it does please let me know I have see so many reports of people asking questions about this problem and it seems like most are left hanging.
Mike

How to map ECC Infoset Query to Crystal Report

Hi All,
I am using 25 standard SAP crystal reports which have been mapped on the top of ECC system. Some of reports are working well but some are not working due to unable to find query. The name of the report is Controlling Dashboard report and it has CO_OM_CA_20_Q1 query which I was unable to map on ECC using Crystal Report. I do not knw how to map ECC table infoset to Crystal report.
Can anybody assist me to get solution?

Hi Efstratios,
Hope you are well!
I am experiencing the same issue:
unable to get this infoset query CO_OM_CA_20_Q1 in Crystal Report which is made on the top of ECC
I followed the BI quick guide as well, I am on EPH 4 and I am able to see both the Query Infoset CO_OM_CA_20_Q1 and its related Infoset /SREP/CO_OM_CCA_20.
But unfortunately, it wouldn't let me update the connection approprietaly.
Is this something you can assist me with?
Thanks in advance
Yann

Converting a Crystal Report with Many Sub-Reports into CF Report Builder

I am trying to rewrite a Crystal Reports report which has 11
subreports in CF Report Builder. In the CR report, each subreport
has it's own report footer seciton. I have not been able to find
anything in CF Report Builder that allows me to do the same. Is CF
Report Builder capable of producing a report with multiple
subreports?

Having successfully created a report with 5 or 6 subreports
(with each sub-report containing a multiple sub-sub reports) I can
say with confidence, "Yes you can." However the real question you
should ask is, "
Should I create a report with multiple sub-reports in CF
ReportBuilder?" And the answer to that is.... NO, WHAT ARE YOU
CRAZY!
If you have something that works in Crystal Reports I would
suggest you stick with that. Otherwise you're setting yourself up
for a lot of headaches. Now maybe it was because I started using
the report builder that came with MX7, but it seems there are still
quite of few bugs that will leave you shaking your fist at your
computer. If however you do continue and do the CF Report Builder
route, be prepared for your application to crash unexpectedly, and
for many things to not work they way you expect them to. And if you
ever need help good luck. Take the fact that you had difficulty
finding good documentation as a sign of how little Adobe supports
this product.
CF Report Builder is fine for very simple reports, but don't
get fancy with it, you'll only regret your decision in the
end.

How to increase the width of the Crystal Report

Hello All
How to increase the width of the Crystal report template in the CR designer in .NET 2005 editor ?
I need to design a report which has to accomodate more number of columns.So achieve that i need to redesign the report having more width.
CrystalReports version 10.2.3600.0
Thanks in advance
Srivatsa

HI Srivatsa,
You can make a wider report by creating virtual pages. Virtual pages are the extra pages to the right of the main page that get created to accommodate cross-tabs that are wider than a single page. By inserting a cross-tab in a report then suppressing it, you can create a report that is multiple pages wide.
Insert and Suppress a Cross-Tab
1. On the 'Insert' menu, click 'Cross-Tab'.
2. In the Cross-Tab Expert, click any field and move it into the 'Columns' box, and click any field and move it into the 'Summarized Fields' box. Do not move any fields into the 'Rows' box.
3. Click the 'Customize Style' tab and select the following check boxes:
" Suppress Empty Rows
" Suppress Empty Columns
" Suppress Row Grand Totals
" Suppress Column Grand Totals
4. Click the 'OK' button and then insert the cross-tab into the Report Header section.
5. On the 'Report' menu, click 'Format Sections'. Click 'Report Header' and select the 'Underlay Following Sections' check box.
When you run the report you will not see the cross-tab, but you will be able to scroll to the right and see multiple virtual pages.
====================
NOTES:
" As there are no rows to the Cross-Tab, it does not carry on to Page 2 and the virtual pages do not appear past the first page.
" To increase or decrease the number of virtual pages do one of the following:
- Limit the number of records for the field in the 'Column' box of the 'Cross-Tab Expert' using the 'Select Expert'.
- Change the width of the 'Column' field in the Cross-Tab by moving the edges of the field.
====================
How to Insert Fields on Virtual Pages
You cannot drag-and-drop a field onto a virtual page, you can only do so on the main page. To get a field to appear on a virtual page:
1. Insert the field on the main page.
2. Click the 'Preview' tab.
3. Drag the right edge of the field to the right, onto the virtual page.
4. Drag the left edge of the field to the right, onto the virtual page.
Hope this helps!!
Regards,
Shweta

How to set defalt parameter(s) for Crystal Report in CRS

Hi everybody,
I am new to Crystal Report designing and Crystal Report Server. My problem is; I had created one Crystal Report with sub-reports and some parameters. I had given default value for those parameters. These parameters are there in main report and linked with sub-reports. After that I deployed it in the Crystal Report Server.
Now i want to schedule the report. while scheduling the report, I want to run the report using default parameter(s). If I Clicked on Schedule button, it is giving "report failed" error. And in parameter list it is showing "No parameters". Why this is happening? Is this default behaviour of Crystal Report Server? Can anybody please suggest me how can I give default values for a report automatically?(using Crystal Report Server)
Thanks in Advance.
Jithesh

Not sure if I understand the question correctly or not. It sounds like you have a main report, with a sub-report and a value is being passed from the main to the sub-report.
When you say you created some parameters, are those parameters in the sub-report or main report?
If it were me I would create a parameter in the main report, and a parameter in the sub report. Have the two reports link on the two parameters.
When you go to schedule the job, set the default value in the cmc under process/parameters.
Let me know if this answers your question. I tend to not fully understand the problem often times.
Good luck!
Rody

Crystal Reports with VS2005 - Load Report failed Error....

Post Author: rajeshvijayan
CA Forum: Older Products
Hi,
I am running Crystal Reports viewer on IIS6.0 and windows server 2003, which was installed using the redistributable package that comes along with Visual Studio 2005. We open these reports through a web based application 1 which is run on a different application pool on IIS. We have about 3 to 4 other web applications runing on the same IIS. All the other Web applications are working fine.
This web application 1 has 2 parts - one is the normal data display quiries from the back end SQL server 2005 and the other is the Crystal Reports which also quires data from SQL Server 2005. At times i find that these reports all of them throw an error - Load Report Failed. At the same time the Part 1 of this application does work fine in showing the data that is queried from the database. Moreover at this stage, I dont find any errors in the Event viewer. If i restart this application pool alone, the reports starts working fine again.
I had gone through a few of the news groups and have made all the necessary permission related changes like the TEMP Folder, ASP.NET temporary folder, the folder in which the crystal reports is placed etc but still the same error throws up after some point in time. Wanted to know if there is any special configuration required on the Application pool when it comes to Crystal Reports. We have bout 10 to 15 users using this application for testing and it only throws this error at times and not always.
Looking forward to any kind of solution from your side.
Regards
Rajesh

Post Author: mikeeby
CA Forum: Deployment
Yes I too have been fighting this problem. I was using a XML Data file and schema file for my u201Cdatabase templateu201D in the report. I would then run my query using the .NET SQLClient then fill the report with my dataset table using the SetDataSource method from the ReportDocument object.
I tried both embedded and runtime loaded reports all worked fine on my development machine but would NOT work on my production server. I use all the server installs, played with user rights, registering DLLu2019s still nothing. I went as far as creating a winform app to fix the problem. I then had exactly the same problem, I was catching the error and it originated from the viewer control in both winform and webforms.
What finally worked for me was to attach to the database using OLE DB instead of XML/schema (xml/xsd) datasource then pasting my SQL Query into the database connection command this gave me the fields to build the report. I actually used the u201CSet Database Locationu201D Dialog in Crystal Reports so I didnu2019t have to redesign my report. This dialog works very weird but I managed to figure it out. I then used an embedded report and all seem to be well. I think there is a problem with the Crystal Reports .NET Server Install and Merge Modules used with .NET with XML files, but I cannot be sure, all I know is this worked for me.
I am concerned that if my database server is moved or renamed my report might break because the server connection is embedded in the report, but for right now it is working. I thought that was the reason for using the xsd file was to eliminate the dependence on a server connection in the report.
Good luck and I hope this helps you fix your problem too. If it does please let me know I have see so many reports of people asking questions about this problem and it seems like most are left hanging.
Mike

How to print table items in column in smartform in 4.6c version.

Hi Experts,
I want to print the items i have in columns (like name invoice number) in smartforms but when i create table in main window there no options for header footer and main area, i have created the template for header and footer but how i print the items in columns. Pls reply ASAP.
Thanks in advance,
Abhishek Pandey.

Hi
create a table under main window
Under the Header create a Row or Line
Under the Row create a Cell and Under that Cell create a text field
In that text you can write what ever field name u want to write
Reward if it is helpful to you
Thanks
Krushna

How to use a connection ODBC in crystal reports viewer?

Hi Guys!
I need to know if for update a report in crystal reports viewer, is necessary, have a connection SAP Business Objects Business Intelligence. How to use a connection ODBC in crystal reports viewer?

Hi Guys!
I need to know if for update a report in crystal reports viewer, is necessary, have a connection SAP Business Objects Business Intelligence. How to use a connection ODBC in crystal reports viewer?

How to suppress a blank section in crystal report

how to suppress a blank section in crystal report. although i have set the property
"suppress blank section "=true ,still i m unable to suppress my section
please help me to cope up this issue.
thanks in advance

One recommendation I make, when troubleshooting suppression issues, is to put a visible border of the section, area or object to be suppressed, and borders for all objects contained in the section or area. This will help isolate what's suppressed, and whether the section is truly blank or has content that's blank.
Furthermore, I recommend indicating which SDK and what version you're using when posting.
Sincerely,
Ted Ueda

How to Print a report with 50 columns. Crystal Reports

Similar Messages

Maybe you are looking for