How to print artwork/text for CDs and CD case

I’m posting this in both iTunes and GarageBand, since I’m not sure which is more appropriate.
I want to create sleeves, or jackets, or whatever they’re called for my CD cases. Does anyone know of a good program and materials that would work for this?
I want it to be capable of doing the following:
1) import artwork, and/or a photo, and print it on the front cover;
2) be able to incorporate printed text on, or over, that;
3) be able to include text for the inside of the cover (maybe a small photo or two, or artwork, on that inside cover (to list tunes and instruments played, for example);
4) include compatibility to print on round paper that would adhere to the CD itself...along with some kind of little “thing” that would facilitate placing that, with some kind of adhesive I guess, onto the CD;
5) and, be compatible with OSX 10.3.9 (Panther).
Your advice, suggestions, deeply appreciated.

To print the Jewel case for the CD in iTunes:
1. Create and name the playlist you want for the CD
2. File > Print
3. Select the "CD Jewel Case Insert" button on the top of the window
4. Select the style of CD Jewel Case insert you want from the pop-up list in the bottom of the window and read the description of the style and look at the picture of the style to understand what you'll get.
To print onto the CD itself, you have three choices:
1. The old fashioned round sticky label. There used to be many versions of this software available from many company's complete with software and labels for about $10-$20. These are great for making nice labels, but as mentioned in another post, can throw off the balance of the CD in the player and can in some instances make the CD unplayable. As a result, they're not as readily available nowadays. Try Office Depot or Office Max.
2. Buy a burner that prints directly onto the CD. As mentioned, this can be expensive.
3. Buy a printer which has the "print directly onto CD" option included. This is a little pricer than the average printer, but printers are pretty cheap nowadays so that's not all that bad.

Similar Messages

  • How to create Standard text for terms and conditions of po print form

    Hi anybody,
      I want create Terms and condtions inside smartforms PO FORM , how do i create terms and conditons and how use font size? I don't want hard code inside smartforms , I will create seperate texts for terms and condition after i include inside smartform.
    How i will do ? anybody please tell me.
    Thanks
    S.Muthu.

    Hi Subramaniyan,
                             U an create an include text node in your smartform.And terms and conditions is the header level text,so i suppose you have to give the inputs as follows :
    Text Name         &**-EBELN&
    Text Object       EKKO
    Text ID              xxxx
    Language          &**-SPRAS&
    is the data at your end .To simplify more follow the following.
    1> go to your purchase order from me23n
    2> open any purchase order and click on the terms and conditions text.
    3> go to GOTO option of the text.and click on the HEADER.
    4> U will find the attributes of the text which you will have to pass to the Include text in your smartforms.
    The long texts arestored in STXH table.
    Reward Points if useful.
    Cheers,
    Deepthee Kasal

  • How to print long text in scripts

    plzzzzzzzzz answer this qestion
    how to print long text in scripts

    Hi Kranthi,
    You can create Text Id and include that in your script.
    For example:
    /E TEXT
    /: INCLUDE ZTEXT OBJECT TEXT ID ST
    Hope this helps.
    Please reward if useful.
    Thanks,
    Srinivasa

  • How to print the text in points wise in sap script

    hi friends,
    how to print the text in points wise in sap script.
    ex: if suppose paragraph consists of 15 lines. then according to one sentence or one fullstop (.) it should give point 1. like that...
    1. hai how ru.
    2. what r  u doing.
    3.where r u.
    like this i want numbering.. waiting for ur replys.
    thanks,
    kiran

    declare a counter
    data : cnt type char 4.
    print :
    cnt = cnt + 1.
    &cnt& &text&
    cnt = cnt + 1. and so on.
    or.
    if the data is in an internal table
    loop at internal_table.
    cnt = cnt + 1.
    write form.
    in script -&cnt& &text&
    endloop.
    Edited by: NIKHILKUMAR POOJARI on Nov 17, 2008 11:18 AM

  • How to print the texts retrived by using READ_TEXT fun module in Smartform

    Please tell me how to print the text which is rertrived by using the READ_TEXT function module in smartform.
    I have coded all things in the program lines and in that i am retriveing the long texts.
    I am getting the text lines in my internal table clearly, the thing is that I am not able to pass these lines to the text.
    I have to print the trouble ticket. in that the notes log I have to pass.
    its urgent. Points will be rewarded for any type of clue. whether it will work or not.

    There are a few ways to do it. If you need to take all of the text in the text type, in your SF text element choose "Include Text".
    Populate the fields with the data that corresponds to the text type. It is similar to the interface to the FM "Read_Text.
    Text Name
    Text Obje
    Text ID 
    Language
    Encase any variables with the "&" symbol.
    If you have already coded the call to the FM "READ_TEXT" and loaded the text into an internal table, create a loop and loop through the itab. Inside of the loop create a text element and add a variable in the text element for the field you are looking to output.

  • How to print Arabic text along with the English in smartform ( ECC6 version

    Hi All,
    our is ECC6 version, Non unicode, ABAP stack ( not dual stack )
    is it possible to print in Arabic language in the above version ?
    if yes, then please let me know how to print Arabic text and English text in the same smartfrom.
    i tried in the following procedures :
    1) i created standard text (SO10) in arabic language.
    i called in the smartform ( include text - i )
    langage AR
    but system throws error message saying, required language is not installed.
    2) if i use READ_TEXT function module.
    text getting printed in diff format but not in arabic.
    waiting for your replies..

    ECC6 and Non-Unicode? I think you'll need multiple code pages, I doubt there's a mixed Arabic/Latin1 available. And I don't think SAP supports new MDMP systems any more. If you need to support multiple languages you really need to go Unicode. It's probably easier to do the Unicode conversion than to try to support multiple code pages and you have to make the switch eventually.

  • Hi..how we enter standard text for smartform using include text

    hi
    guru
    ..how we enter standard text for smartform using include text..
    i know only using so10 we write text..
    in smartform it asking text-object
                                     text-id,
    so what values we should give to get text

    Hi,
       Do u want to print Standard Text or the Texts that are maintained at the Transaction level.
    If it is standard text , then u use text id as ST or if it is Texts that are maintained at the Transaction level then u have to go to that specific transaction and check for that text , then go to text editor ,in the goto menu u have header data where u get the Text id , text name.... , use them in ur smartform in the INCLUDE text.
    Further u have the option of text modules in smartforms which act as standard texts, so if u r going for creation of standard texts then its better to use text modules.
    Regards,
    Shafivullah Mohammad

  • How to print a text in java?

    How to print a text in java?

    of corse, i have JTextField in my frame that i want to extract the text and print it on a paper with a printer.

  • How to print multiple footers for each page in RTF template xml report.

    Hi,
    How to print multiple footers for each page in RTF template xml report.
    i am able to print ( two sets ) ...
    up to last page ( one template ) and for last page ( another template).
    i want to change the footer information based on the group value printed in the report ( it might be 5 to 6) In every report run.. can you please check and let me know do we have any feasibility to achieve this.
    Thanks in advance.
    Regards,
    KAP.

    You can remove all other logic, like last page only contents (start@last-page:body), etc and section breaks if any you have inserted manually.
    Just have for-each@section logic.
    It would be difficult for me to guess what you have done without looking at your RTF or describing here.

  • How to print claim code for envy 5530 without connecting to internet?

    how to print claim code for hp envy 5530 without connecting to internet. We do not have wireless internet and we are trying to set up the eprint app for our samsun android phones and ipad. We need to print off the claim code from the printer but it seems we need to have internet for that. is there any way around that?
    Thanks

    Hi,
    You have to, without connecting to the internet, the claim code (if you can get one) is useless.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to print vertical lines for line items?

    hi experts,
                    can any one tell me how to print vertical lines for line items in ascript?
    ive tried using sy-vline but its printing jus one line each for each item .i want it in columns ?if there are any control commands plz let me know how to print?
    thanks &regards
    narendar

    hi narendar,
    Welcome to SDN.
       u can go for box command.
    Use the box command with zero width for vertical lines.
    Position the line by x position and y postion.
    syntax :
    BOX <xpos> <ypos>
           <width>
          <height>
          <thickness in twips> twips.
    Regards,
    Arun.
    Reward points if useful.

  • How to programatically select text for editing in an af:inputText control?

    Hello, I am new to jdeveloper 11.1.1.3.0 and have searched and searched for info. I must be using the wrong terms as I cannot find any info or example on how to programatically select text for editing in an inputText field.
    My request is to change an existing app so when the user presses a button, control should go to the inputText control (this part works, see existing backing bean code from another developer below) but automatically select the text within for editing by the user (saving the user from having to select the text first before editing).
    Backing bean code to set the focus to an inputText field:
    * sets the cursor to the given component id
    * @param  componentId of item on page
      public void setFocusOnUIComponent(String componentId) {
        FacesContext facesContext = FacesContext.getCurrentInstance();
        ExtendedRenderKitService service =
          Service.getRenderKitService(facesContext, ExtendedRenderKitService.class);
        UIComponent uiComponent = facesContext.getViewRoot().findComponent(componentId);
        service.addScript(facesContext,
          "Component = AdfPage.PAGE.findComponentByAbsoluteId('" + componentId + "'); Component.focus();");
      } I hope this isn't a dumb question and would appreciate it if someone can steer me in the right direction.
    Thank you for any info,
    Gary

    Hi,
    not a dumb question at all. Before answering it, here some comments on the code you pasted in your question
    1. UIComponent uiComponent = facesContext.getViewRoot().findComponent(componentId);
    This code line is not used at all in your method. So it seems you can get rid of it
    2. "Component = AdfPage.PAGE.findComponentByAbsoluteId('" + componentId + "'); Component.focus();");
    I suggest to change it to
    "var component = AdfPage.PAGE.findComponentByAbsoluteId('" + componentId + "'); component.focus();");
    as it is better coding practice to have variable names starting with a lower case letter and being flagged with the "var" identifier
    For pre-selecting text in an an input component, there is no API available in ADF Faces, which means you need to reach out to the rendered HTML ouput. To access the markup for the rendered component, you can try
    var markup = AdfRichUIPeer.getDomContentElementForComponent(component)
    If this markup returns the HTML input component then you can use JavaScript you find on the Internet to select the area of it. If it does not return the input component then you may have to use
    document.getElementById(componentId+'::content')
    Note however that working directly with generated HTML output bears the risk that your code breaks when - for whatever reason - the ADF Faces component rendering changes in the future
    Frank
    Frank

  • I need to know how to print a text meassage to my printer?

    I would like to know if anyone knows how to print a text message from your phone or from the pc?

    1. Another option is using the "Google Cloud Printer" App. Yes there are times were I send myself a text message, in order to print it, and store it on my computer. Then there times are times that I use the Google Cloud Printer App.
    2. You have the option to set-up the "Google Cloud Printer" App to use a classic printer or an e-printer. I do not have an e-printer, but I have used the classic printer method okay.

  • I have enhanced standard master datasource , How to load the Text for it?

    Hi Experts,
    I had enhanced 0MATERIAL_ATTR with ZTGRM field.User exit is written and the data is populated and checked in RSA3.
    Replicated,loaded in BW side.Activated the master data.It shows only the attribute not the text.
    Tried loading 0material_text and loaded successfully, activated but while maintaining the master data , i can able to see only the attribute values not the text.
    Can any one help how to load the text for the enhanced attribute?
    Thanks in advance
    Ganesh Kumar

    Hi Tony,
    Loaded the 0MATERIAL_TEXT ,also sucessful.
    After loading activated the 0material but i could only see values for 0material_attr not for the 0material_text.
    Can you tell me how to load the text data to the newly enhanced attribute???

  • How to print double sided for SAP without exporting

    Hi Friends,
    Could you explain me that how to print double sided for SAP without exporting? Thanx.

    Hi,
    As per your query this is printer facility not to SAP. You have to define your printer in double printing by default and get all the printout both side from any software like SAP,Excel,Word etc.
    Anil

Maybe you are looking for

  • Calendar Weather Icon & Temp

    Would Apple consider adding a small weather icon and temp to the current and following 5 days in their iCal and iOS calendar? The data could be pulled from the same place the weather app does, it would give folks better, quicker planning at a glance.

  • Filling up Line item text in BAPI_PR_CREATE

    Hello Guys,     I want to use the FM BAPI_PR_CREATE and fill up its item text for line item level. How do you properly fillup the table <i><b>PRITEMTEXT</b></i>? What should be the appropriate TEXT_ID, TEXT_FORM should I use? I urgently need your pro

  • Transport Software Component from DEV to QAS

    Hi all I have a swc  dev system in PI  7.1 which I transported through CTS to qas successfully, but not visible the swc in the sld of qas, How I can leave the sld of qas consistent with dev?

  • E-Commerce for mySAP ERP: Problem with java source code

    Hello everybody, we try to implement web shops on the basis of ECO for ERP 5.0. The shop is running fine and we want to start with some extensions in java classes and web UI with NWDI  2004s. We created a new track and our own application as describe

  • Converting .swf files to .exe files on a mac?

    How can I convert .swf files to .exe file on a mac? I am working in Flex, so if there is a way to directly export .exe files that would be even better, but either one would be great. Can't seem to find any answers on this. Thanks a lot!