How to print Chinese character in Zebra printer?

Hi,
Could you please advise how to print Chinese in Zebra printer, I have added below ZPL command line in SAPSCRIPT, but it did not work.
^CW1,B:MSUNG.FNT
FO711,60A1N,47,79CI17F8FB1561,3,0,LFN998^FS

Hi,
go through the following links.
[Printing Chinese Characters on Labels using ZEBRA;
I hope it helps.
Regards,
Rohit

Similar Messages

Report cant print Chinese character properly when direct output to printer

I have follow the instruction {How to Print PDF/UTF8 in R12? [ID 778970.1]} {PASTA 3.0 Release Information}
I am able to print the chinese character properly in PDF format. (direct to printer)
However, some standard report like "Final Payment Register" "TEXT format" NOT able to print chinese character(direct to printer)
When I preview the report it can display chinese character properly.
Please advise

However, some standard report like "Final Payment Register" "TEXT format" NOT able to print chinese character(direct to printer)
When I preview the report it can display chinese character properly.Please see (What Happened To The Preliminary And Final Payment Register In R12? [ID 746339.1]).
Thanks,
Hussein

Cannot print Chinese character in postscript 11iAS

We are using HRMS 11.5.10AS.
We want to print the report in postscript. However, some chinese character cannot be print correctly. ( it's right in TXT )
Anyone know how to solve it?

chulongjiang,
i solve the problem with your advice, thanks lot!
Regards,
Alan 24/11/2005

Printing trhough SAPWIN with ZEBRA printer

Hi Gurus
I need your help please since I already spent a lot of time to find a solution and not found any.
I use Smartform to produce labels on ZEBRA printer (output Device Z201, Device Type ZLZEB2:Zebra label printer 203dpi). All fields on my form use HELVE as font. I print my form through Z201 and it works fine.
My requirement now is to print the form to ZEBRA printer locally using SAPWIN (Rel 4.x/SAPlpd 4.09 + ONL:Y) as device type. To do this I created a new output device LCLB, copied the device type SAPWIN into ZWIN and attached to output device LCLB
The problem is when I print the form using LCLB, all my fields with HELV font are printed with COURRIER font.
I went in transaction SE73 and display printer fonts associated with ZWIN and it seems that all fonts (COURCYR, COURIER, OUR_I7, HELVCYR, HELVE, HELV_I7, OCRA, OCRB, TIMECYR, TIMES, TIME_I7) are defined there. Do I miss something? Do I have to redefine the print control in ZWIN with control characters corresponding with ZEBRA printer?
Any feedback would be appreciated
Thank you

Hi Valter,
did you figured it out why do you had a problem with that printer?
tks
best regards,
Pedro

Printing sapscript label using zebra printer

Hi,
Can anybody please help me regarding "printing sapscript label using zebra printer"?
i hav set the following print default settings in the transaction mb90:
output device :
NO01
device type: YZZX_ZEB
but when i try to print ,i am getting error message stating that "the respective sapscript form is not active ".
i hav also attached my print program for ur easy reference.
====================================================================*
FORM open_form_slv.
*' Description:
*' Add information for the SAP spooler
*' Change the name of the standard customized form for Zebra print
*' Last Change Vers Programmer   Reason
*1
DATA: BEGIN OF print_infos.
          INCLUDE STRUCTURE itcpo.
DATA: END OF print_infos.
DATA: form_name(16) TYPE c, char1(1) TYPE c, ind_beg TYPE i.
PERFORM itcpo_fuellen.
MOVE-CORRESPONDING itcpo TO print_infos.
WRITE sy-datum USING EDIT MASK '__.__.____'
                                           TO print_infos-tdcovtitle+1.
WRITE sy-uzeit USING EDIT MASK '__:__:__'
                                          TO print_infos-tdcovtitle+12.
CONCATENATE itcpo-tddest sy-uname ' PO'(001) ekpo-ebeln ' Doc.No'(002)
                                       mseg-mblnr print_infos-tdcovtitle
                          INTO print_infos-tdcovtitle SEPARATED BY space.
form name from the table YZZM_GR_LABEL
IF NOT g_fonam IS INITIAL.
    tnapr-fonam = g_fonam.
ENDIF.
if the used printer is a Zebra label printer, then the customized
layout set name ???_???_XXX will be changed to ???_???_ZP
SELECT SINGLE * FROM tsp03d WHERE padest = nast-ldest.
IF tsp03d-patype = 'YZZX_ZEB'.
    ind_beg := 15.
    WHILE ind_beg > -1.
      char1 := tnapr-fonam+ind_beg.     " substr(tnapr-fonam,ind_beg,1)
      IF char1 = '_'.
        form_name := tnapr-fonam(ind_beg).
        CONCATENATE form_name '_ZP' INTO tnapr-fonam.
        EXIT.
      ENDIF.
      ind_beg := ind_beg - 1.
    ENDWHILE.
ENDIF.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device   = 'PRINTER'
      language = language
      OPTIONS = print_infos
      form     = tnapr-fonam
      dialog   = ' '.
x_open := x.
IF mseg-weanz = 0. mseg-weanz = 1. ENDIF.
IF syst-tcode <> 'MB90' AND NOT g_flag_popup IS INITIAL.
check for requirement of printing label and ask for gr-quantities (popup)
    SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln.
    CLEAR yzzm_gr_quantity-no_popup.
ELSE.
and ask not for gr-quantities
    IF syst-tcode = 'MB90'.
      yzzm_gr_quantity-erfmg := mseg-menge.
    ELSE.
      yzzm_gr_quantity-erfmg := mseg-menge / mseg-weanz.
    ENDIF.
    yzzm_gr_quantity-no_popup := x.
ENDIF.
determination inspection lot number
CLEAR qals-prueflos.
SELECT SINGLE * FROM qals WHERE mblnr = mseg-mblnr
                       AND zeile = mseg-zeile
                       AND mjahr = mseg-mjahr.
determination vendor batch
CLEAR mch1-licha.
SELECT SINGLE * FROM mch1 INTO mch1 WHERE matnr = mseg-matnr
                                        AND charg = mseg-charg.
ENDFORM.                    "open_form_label
=================================================================== *
FORM we01_print_slv.
*' Description:
*' print out of hazardous symbol
*' controls the Zebra printer
*' Last Change Vers Programmer   Reason
*****26.09.2007 Starts
DATA: l_objky TYPE nast-objky,"Object key
        l_vstat TYPE nast-vstat. "Processing status of message
*****26.09.2007 Starts
TABLES: mgef, t300.
FIELD-SYMBOLS: .
DATA: aux_index LIKE sy-index.
DATA: count_haz_sym, position TYPE n, zw TYPE p DECIMALS 1.
DATA: aux_value(5) TYPE c.
DATA: txt(10) TYPE c, pos(5) TYPE c.
t001w-werks = r_werks.
t001w-name1 = r_name1.
PERFORM read_address.
*2
SELECT SINGLE * FROM ekpo WHERE ebeln = mseg-ebeln
                              AND ebelp = mseg-ebelp.
CLEAR mara-stoff.
SELECT SINGLE stoff INTO mara-stoff FROM mara WHERE matnr = mseg-matnr.
IF NOT mara-stoff IS INITIAL.
    CLEAR t300.
    SELECT SINGLE * FROM t300 WHERE lgnum = mseg-lgnum.
    IF NOT sy-subrc IS INITIAL.
for plants without warehouses try to use the country code
      CASE mseg-werks.
        WHEN 'BUP'.
          t300-regkz := 'US '.
      ENDCASE.
    ENDIF.
    CLEAR mgef.
    SELECT SINGLE * FROM mgef WHERE stoff = mara-stoff
                              AND   regkz = t300-regkz.
ENDIF.
in case of more then one label, use for each a new output window
(not only for the first)
IF g_count > 1.
    CALL FUNCTION 'CONTROL_FORM'
      EXPORTING
        command = 'NEW-WINDOW'.
ENDIF.
Ausgabe Gefahrstoffsysmbole        Neustadt, V.Hilgert 14.07.98
*For output type YNL7, the hazardous warning symbol has to be printed at the bottom of the label.So label is called before that.
IF tnapr-kschl = 'YNL7'.
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        element = 'LABEL'.
ENDIF.
count_haz_sym = 0. position = 0.
WHILE count_haz_sym = 'XN'.
For output type YNL7, the width of the standard text is small.
      IF tnapr-kschl = 'YNL7'.
        zw = position * '0.2' + '0.1'. pos = zw.
      ELSE.
        zw = position * '1.3' + '0.1'. pos = zw.
      ENDIF.
      IF tsp03d-patype = 'YZZX_ZEB'. " device type for ZEBRA label priter
        aux_value := count_haz_sym.
      ELSE.
        aux_value := pos.              " HP/Kyocera or other laser printer
      ENDIF.
      CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
        EXPORTING
          name   = '&XPOS&'
          value = aux_value
        EXCEPTIONS
          OTHERS = 1.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element   =
          window    = 'MAIN'
        EXCEPTIONS
          element   = 1
          function = 2
          type      = 3
          unopened = 4
          unstarted = 5
          window    = 6
          OTHERS    = 7.
      IF sy-subrc = 0.
*Varying the position for YNL7
        IF tnapr-kschl = 'YNL7'.
          position = position + 2.
        ELSE.
          position = position + 1.
        ENDIF.
      ENDIF.
    ENDIF.
ENDWHILE.
IF NOT mseg-vfdat IS INITIAL.
    am07m-mhtxt = text-105.
ENDIF.
IF NOT am07m-mhdat IS INITIAL.
    am07m-mhztx = text-106.
ENDIF.
IF ekko-bsart = 'UB'.
    am07m-litxt = text-101.
    am07m-libzg = ekko-reswk.
ELSE.
    am07m-litxt = text-100.
    am07m-libzg = ekko-lifnr.
ENDIF.
belpos-mblnr = mkpf-mblnr.
belpos-zeile = mseg-zeile.
CONDENSE belpos NO-GAPS.
am07m-belpos = belpos.
IF t156-shkzg = h.
    am07m-hdlne = text-020.
ELSE.
    am07m-hdlne = text-010.
ENDIF.
Ausgabe der Etiketten mit den ind. Mengen
IF NOT g_flag_popup IS INITIAL.
    SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln
                                          AND   weanz = g_count.
ELSE.
* print the number of labels is handeled by the Zebra printer
IF tsp03d-patype = 'YZZX_ZEB'. " device type for Zebra label prts
g_lbls_tot := mseg-weanz - g_count + 1.
g_break_print := x.
ENDIF.
ENDIF.
mseg-erfmg := yzzm_gr_quantity-erfmg.*
********26.09.2007 Starts
CONCATENATE mseg-mblnr mseg-mjahr mseg-zeile INTO l_objky.
SELECT SINGLE vstat INTO l_vstat FROM nast WHERE kappl = 'ME' AND
objky = l_objky AND
kschl = 'YNL7'.
********26.09.2007 Ends
CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
EXPORTING
name = '&nummer&'
value = g_count.
IF tnapr-kschl <> 'YNL7'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'LABEL'.
else.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'BAR_CODE'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10.
IF sy-subrc <> 0. MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
ENDIF.
ENDFORM.                    "GR_label_print
*&      Form lesen
      text
     -->OBJKY      text
FORM lesen USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-evers IS INITIAL.         "Versandvorschriften lesen.
    PERFORM t027_lesen.
ENDIF.
PERFORM bestellung_lesen.
IF NOT ekpo-knttp IS INITIAL AND NOT
         ekpo-weunb IS INITIAL.
    PERFORM kontierung_lesen.           "für multikontierte Bestellungen
ENDIF.
IF NOT mseg-ematn IS INITIAL.
    PERFORM lesen_htn.
ELSE.                                                     "111277/PH
    CLEAR am07m-mfrpn.                                      "111277/PH
ENDIF.
IF mseg-matnr IS INITIAL.
    mseg-menge = mseg-bpmng.
    mseg-meins = mseg-bprme.
    PERFORM bestelltext_lesen.
    CLEAR mabdr.
ELSE.
    PERFORM material_lesen.
ENDIF.
PERFORM tab024_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM.                    "lesen
Lesen für WE-Schein Fert.Auftrag -
FORM lesen_wf USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
PERFORM auftrag_lesen.
IF NOT mseg-matnr IS INITIAL.
    PERFORM material_lesen.
ELSE.
    mseg-menge = mseg-erfmg.
    mseg-meins = mseg-erfme.
ENDIF.
PERFORM tab024d_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM.                    "lesen_wf
Lesen für Warenausgang -
FORM lesen_wa USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
    PERFORM material_lesen.
ENDIF.
PERFORM ladr_lesen.
ENDFORM.                    "lesen_wa
Druck Vorbereiten -
FORM open_form.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device   = 'PRINTER'
      language = language
      OPTIONS = itcpo
      dialog   = ' '.
PERFORM lesen_t159p.
x_open = x.
ENDFORM.                    "open_form
Druck Vorbereiten Sammelscheine -
FORM open_form_sammel.
PERFORM lesen_t159p.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device   = 'PRINTER'
      language = language
      OPTIONS = itcpo
      form     = tnapr-fonam
      dialog   = ' '.
x_open = x.
ENDFORM.                    "open_form_sammel
Druck schließen -
FORM close_form.
CHECK NOT x_open IS INITIAL.
CALL FUNCTION 'CLOSE_FORM'.
CLEAR x_open.
ENDFORM.                    "close_form
Hilfsfelder versorgen für Sammelscheindruck -
FORM helpdata1.
   *mkpf = mkpf.
   *mseg-lgort = mseg-lgort.
   *ladr = ladr.
save_mkpf = *mkpf-usnam.
save_mblnr = *mkpf-mblnr.
save_budat = *mkpf-budat.
save_cpudt = *mkpf-cpudt.
save_ematn = *mseg-ematn.
save_lgort = *mseg-lgort.
save_ladr = *ladr.
   *t001w = t001w.
save_werks = *t001w-werks.
save_name1 = *t001w-name1.
   *ekko = ekko.
   *am07m = am07m.
save_lifnr = *ekko-lifnr.
save_ebeln = *ekko-ebeln.
save_ekgrp = *ekko-ekgrp.
save_linam = *am07m-name1.
save_lina2 = *am07m-name2.
   *t024 = t024.
save_eknam = *t024-eknam.
save_ektel = *t024-ektel.
   *mkpf-usnam = old_mkpf.
   *mkpf-mblnr = old_mblnr.
   *mkpf-cpudt = old_cpudt.
   *mkpf-budat = old_budat.
   *mseg-ematn = old_ematn.
   *mseg-lgort = old_lgort.
   *ladr = old_ladr.
   *t001w-werks = old_werks.
   *t001w-name1 = old_name1.
   *t024-eknam = old_eknam.
   *t024-ektel = old_ektel.
   *ekko-lifnr = old_lifnr.
   *ekko-ebeln = old_ebeln.
   *ekko-ekgrp = old_ekgrp.
   *am07m-name1 = old_linam.
   *am07m-name2 = old_lina2.
save_lfa1 = lfa1.
IF NOT old_lfa1 IS INITIAL.
    lfa1 = old_lfa1.
ENDIF.
ENDFORM.                                                    "helpdata1
--- Versorgung der Hilfsfelder vor CLOSE_FORM bei Sammelscheindruck --
FORM helpdata2.
old_lfa1 = save_lfa1.
lfa1     = save_lfa1.
old_mkpf = save_mkpf.
old_lgort = save_lgort.
old_ladr = save_ladr.
old_budat = save_budat.
old_cpudt = save_cpudt.
old_werks = save_werks.
old_name1 = save_name1.
old_mblnr = save_mblnr.
old_lifnr = save_lifnr.
old_linam = save_linam.
old_lina2 = save_lina2.
old_ebeln = save_ebeln.
old_ekgrp = save_ekgrp.
old_eknam = save_eknam.
old_ektel = save_ektel.
old_ematn = save_ematn.
   *mkpf-usnam = save_mkpf.
   *mkpf-mblnr = save_mblnr.
   *mkpf-budat = save_budat.
   *mkpf-cpudt = save_cpudt.
   *mseg-ematn = save_ematn.
   *mseg-lgort = save_lgort.
   *ladr = save_ladr.
   *t001w-werks = save_werks.
   *t001w-name1 = save_name1.
   *t024-eknam = save_eknam.
   *t024-ektel = save_ektel.
   *ekko-lifnr = save_lifnr.
   *ekko-ebeln = save_ebeln.
   *ekko-ekgrp = save_ekgrp.
   *am07m-name1 = save_linam.
   *am07m-name2 = save_lina2.
ENDFORM.                                                    "helpdata2
Form Lesen Warenausgang Lohnbearbeiter -
FORM lesen_wlb USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
    PERFORM material_lesen.
ENDIF.
ON CHANGE OF mseg-lifnr.
    PERFORM read_address.
ENDON.
ENDFORM.                    "lesen_wlb
*eject
Fuellen der ITCPO -
FORM itcpo_fuellen.
IF xscreen NE space.
*- Testausgabe auf Bildschirm -
    itcpo-tdpreview = 'X'.
    itcpo-tdnoprint = 'X'.
ELSE.
    CLEAR: itcpo-tdpreview,
           itcpo-tdnoprint.
ENDIF.
MOVE-CORRESPONDING nast TO itcpo.
itcpo-tdcover   = nast-tdocover.
itcpo-tddest    = nast-ldest.
itcpo-tddataset = nast-dsnam.
itcpo-tdsuffix1 = nast-dsuf1.
itcpo-tdsuffix2 = nast-dsuf2.
itcpo-tdimmed   = nast-dimme.
itcpo-tddelete = nast-delet.
itcpo-tdcopies = nast-anzal.
itcpo-tdprogram = sy-repid.
ITCPO-TDTELELAND = US_COUNTRY.
itcpo-tdsenddate = nast-vsdat.
itcpo-tdsendtime = nast-vsura.
itcpo-tdnewid   = x.
ENDFORM.                    "itcpo_fuellen
*eject.
------------ FORM lesen der Lagerortadr. ---------------------------*
FORM ladr_lesen.
DATA:    BEGIN OF addr_sel.
          INCLUDE STRUCTURE addr1_sel.
DATA:    END OF addr_sel.
CLEAR ladr.
SELECT SINGLE * FROM twlad WHERE werks = mseg-werks
                       AND lgort = mseg-lgort
                       AND lfdnr = '001'.
IF NOT twlad-adrnr IS INITIAL AND sy-subrc IS INITIAL.
    MOVE twlad-adrnr TO addr_sel-addrnumber.
ENDIF.
CALL FUNCTION 'ADDR_GET'
    EXPORTING
      address_selection = addr_sel
    IMPORTING
      sadr              = ladr
    EXCEPTIONS
      OTHERS            = 1.
ENDFORM.                    "ladr_lesen
**&      Form REPRINT
      text
*FORM reprint.
TABLES : nase.
DATA : x TYPE string.
IF nase-vermo = 2.
   x = 'REPRINT'.
ENDIF.
*ENDFORM.                    "REPRINT
Kindly do the needful.
Thanks in advance
Regards
Swarna

Hi Swarna,
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = print_infos
<b>form = tnapr-fonam</b>
dialog = ' '.
x_open := x.
I thing its not a good way to pass the Form name to the Parameter.
Try like,
data : temp_form like tnapr-fonam.
<b>form = temp_form</b>
Thanks.

How to print Chinese character in java

Hi All,
I have a problem .
I am trying to read a file which contains chinese characters and the print the content of this file to the printer.
But when the content of the file is being printed, it is printing weird characters and not chinese characters. Can anyone please help.
Plese find below, my code.
import java.io.*;
import java.lang.*;
import java.io.BufferedInputStream;
class FileRead{
//--------------------------------------------------< main >--------//
public static void main (String[] args) {
FileRead t = new FileRead();
t.readMyFile();
//--------------------------------------------< readMyFile >--------//
void readMyFile() {
String record = null;
int recCount = 0;
try {
FileReader fr = new FileReader("amaebisushi.GB.TXT");
FileOutputStream os = new FileOutputStream("\\\\ps_apex_1\\ps_lpt1");
BufferedReader br = new BufferedReader(fr);
PrintStream ps2 = new PrintStream(os);
record = new String();
while ((record = br.readLine()) != null) {
recCount++;
System.out.println(recCount + ": " + record);
ps2.println(recCount + ": " + record);
} catch (IOException e) {
// catch possible io errors from readLine()
System.out.println("Uh oh, got an IOException error!");
e.printStackTrace();
} // end of readMyFile()
} // end of class

Try not to rely upon the default encoding, but define it explicitly.

Problem with printing barcodes to a Zebra printer via Smartform

Hi
I am trying to create a printed label from smartforms, being directed to a zebra printer. The label must include a barcode.
Via oss notes 750002 and 750772 I have imported the LZEB2 device type.
In SE73 I have created a system bar code on the new technology.
In the smart form style, I create a character type with this barcode font.
The barcode prints okay and can be read when it has up to 10 characters.
However we need a long bar code of appoximately 22 characters.
I can find no supported barcode type which will let me write a barcode of this length
The max length in the smartform style for the barcode format is always coming up as 50mm which is too short.
I have tried with using a printer bar code prefix and suffix with the native zebra ZPI-II commands, attaching to command nodes on either side of the text node in the smart form, But this does not seem to work.
Any advice ?
Thanks

sounds like the variable containing the barcode data is too short...is it at least 22 characters long?

How to put Chinese character in jar file by java.util.jar.Manifest?

Now I want to develop a simple package tool which can modify some property in manifest.mf of jar files,but the Manifest class's putValue method only can correctly save English character.why?
And how can I put Chinese character?
the code is:
Attributes ab = mf.getMainAttributes();
ab.putValue("agent-Name", agent);

Attribute values can contain any character and it will be UTF-8 encoded when written to the manifest, according to Javadoc.
What makes you think that this mechanism fails? What do you see instead of the Chinese character? And what tool/editor/program you use to see it? I did not try myself, but according to the Javadoc there should be no problem.

How to type chinese character in Oracle Report builder 6i?

Hi,
Does anyone know how to include the chinese character in the rdf file under Oracle Report Builder 6i?

Hi,
please check with this link
[https://blogs.oracle.com/ankitkaushik/entry/displaying_multilingual_data_i ]
Hope this link will help you
Thanks & Regards,
pallis

SAP Script : Control Commands for printing Label (barcode) by Zebra Printer

Hello,
I would like to know the control commands in sap script for Zebra Printer. The purpose of task is to print a field in barcode format in Right Bottom of the label.
The sample code is placed below. Kindly have a look at it. The problem now i am facing is, the barcode for Customer PO is printing on the wrong place (Left Bottom, the text & barcode are overwriting). Can anyone suggest a possible way or can any one send the document for Barcode commands in SAP Script for Zebra Printer.
Sample script code:
Initialization and reset Barcode
XAMCY^XZ
Start
^XA
Barcode setup
^BY3,2.7,2.2
Set label home position
^LH
^FWN
FO385,025A0R,40,50FDPN: &VBAP-MATNR&FS
FO385,725A0R,40,50FD&VBAP-ARKTX&FS
FO385,1710A0R,40,50FDRtns: &zsntsc-contr&FS
FO345,025A0R,40,50FDService Order# &AUFK-AUFNR&FS
FO345,725A0R,40,50FDSerial# &EQUI-SERNR&FS
FO345,1710A0R,40,50FDRepair Order# &VBAP-VBELN&FS
FO245,025B3R,N,90,N,NFD&AUFK-AUFNR&FS
FO245,725B3R,N,90,N,NFD&EQUI-SERNR&FS
FO245,1710B3R,N,90,N,NFD&VBAP-VBELN&FS
FO138,1710A0R,40,35FDCustomer PO# &VBKD-BSTKD&FS
FO98,025A0R,40,50FDWrnty: &W_WARRANTY&FS
FO98,605A0R,40,50FDRoute: &W_ROUTE&FS
FO58,025A0R,40,35FDShip-to-name: &W_NAME1&FS
FO58,1325A0R,40,35FDMinor Group/Nr: &TVM5T-BEZEI&FS
FO58,1325A0R,40,35FDMinor Group/Nr: &TVM5T-BEZEI&FS
FO18,885A0R,40,35FDReported By: &QMEL-QMNAM&FS
FO18,1710B3R,N,90,N,NFD&VBKD-BSTKD&FS
^XZ
Thanks in Advance,
Ramasamy

HI
GOOD
GO THROUGH THIS
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
GO THROUGH THESE LINKS
http://www.sap-img.com/abap/details-information-about-sap-barcodes.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm
THANKS
MRUTYUN

How to put chinese character in the Manifest file

Hi,
I want to know that how can we put chinese characters in the manifest file. Please suggest a solution.
Regards

[slightly confused stuff removed]Sorry, AmitChalwade123456, I know trolling can be very funny, but you're confusing the sh*t out of newbies with this almost-seems-usefull kind of talk.
Stop that.
And in case you really meant that seriously: Please refrain from giving advice with regard to encoding. What you posted is wrong (to put it mildly).

How to display Chinese Character(s) in a image on a Linux platform?

Hi,
I have the following code that runs perfect on Windows XP system after I installed the Chinese fonts on it, and set the fontconfig file under jre.
What the program does is: load an image file, write some Chinese chars in it and redisplay the image, so that the image will contain the Chinese characters in it.
I ported the generating image with Chinese Characers part of code into a web application which the servlet returns the modified image to client. The web application is running on a linux box. However, when a user views the image on the browser, the Chinese chars are not well displayed (they are just several squares).
My question is, does the problem comes from the Chinese fonts settings on the linux system where the servlet is running on? And, how to fix the problem, any simple links on how to do that?
Thanks.
public void paint(Graphics g) {
ImageIcon photo = new ImageIcon("C:\\image.jpg");
Graphics2D g2 = (Graphics2D)g;
g2.drawImage(photo.getImage(), 0, 0, null);
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
Font font = new Font("Arial Unicode MS", Font.PLAIN, 16);
g2.setFont(font);
g2.drawString("¶", 140, 220);
}

"Arial Unicode MS" is the font provided by Microsoft, usually with MS Office products. I believe that's why those Chinese are rendered as square boxes on Linux. Either specifying some Chinese font available on your Linux box in the Font constructor, or using one of the logical fonts instead (for JDK5 and later) would help.
Naoto

Cannot print out chinese character

Hi All,
I have problem with the printer. I can printed Chinese character without using SAP and from SAP when I print the Chinese character is not come out. On the paper will appear symbol ###. I don't how want to do.
FYI, my system is Unicode.
Thank You
Regards,
anang78

Hi,
Check the OSS note 776507 which talks about print preview for
characters in Chinese language and print of ## characters during printing Asian languages.
Please go through the note , as per section " Note on SAPscript/SmartForms Print Preview "
we need to use device type CNHPLJ4 for printing Chinese character set.
Thanks
Jibin

Printing chinese characters in a zebra printer using SAP Interactive Forms

Hello,
We have created an Adobe Interactive Forms in SAP with transaction SFP. In this form we have used some words in English and another ones using Simplified Chinese characters . We have defined a Zebra printer in SPAD transaction using Device Type AZPL203.
We have defined an ABAP program to printout this form. When we print it in the zebra printer some of the chinese characters are printed and some of them no.
Has anyone faced the same problem?
Please if this is not the right forum, please could you adress me to the right one?
Thanks a lot
Miquel A. Vergara

Hello,
Please check if the notes below are useful.
83502 - Printing Support for Native Languages
1612051 - Foreign text printed with garbage characters
Thanks,
Ravi

Printing chinese text in a smartform.

Whenever, I try to write chinese text in the smrtform, some weird characters appear. How can I paste chinese text in the smartform. Please provide me a solution.
Moderator message: please do some research before asking.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
Edited by: Thomas Zloch on Feb 28, 2011 9:21 AM

Please check with your basis that your output device support print Chinese character. Or, you can search more in forum, there are a lot of threads about print Chinese and other Unicode characters in form.
Thanks,

How to print Chinese character in Zebra printer?

Similar Messages

Maybe you are looking for