How to print envelopes hp laser jet pro mfp m225dw

Can you please advise as to how I can print invitation style (4 3/8 x 5 2/4) envelopes on the Laser Jet Pro MFP M225dw? Also, if my template is set up for a horizontal mail merge configuration, how should the envelope be inserted into the printer?

Hey @Shaggs,
I would like to assist you today with printing on envelopes with your HP LaserJet Pro MFP M225dw.
Please refer to the document below for step by step instructions on how to load envelopes in your printers paper tray:
Loading Plain Paper and Envelopes
Once you have your envelope loaded properly, open up the program that you want to print envelopes from. Because Word seems to be the standard program that people print envelopes from I'm going to provide you with the envelope printing instructions for that specific program. Should these steps not work for you, be sure to respond to this post with your Operating System and the program that you're printing from.
What's my OS?
How to Print Envelopes from Word:
1. Open Word and click on Mailings at the top
2. Select 'Envelopes' from the top left hand side
3. An Envelopes and Labels page should now open. Enter your Delivery and Return Addresses.
4. Select 'Options' on the bottom right hand side.
5. Under the 'Envelope Options' tab ensure that your Envelope size is appropriately selected.
6. Select the 'Printing Options' tab at the top. You now need to select the appropriate Feed Method for your product.
7. Make sure that you choose the 'Face up' option.
8. Also ensure that 'Clockwise Rotation' is not selected.
9. Hit 'OK' and 'print'
Here is a video for additional instruction:
Please respond to the this post with the result of your envelope printing. Thanks for reaching out to the HP Support Forums. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Similar Messages

Laser Jet Pro MFP M127fn

I downloaded windows 10 and now my laser Jet Pro does not workcan you please help me with thisMargie

Hey , Welcome to the HP Support Forum. I see that your HP LaserJet Pro MFP 127fn has ceased working from PC since performing a Windows 10 update. I would like to help you with this. My guess is that this loss of functionality can be attributed to the fact that no Windows 10 driver has been released for your 127fn. Having said that, I have had some success in reloading Windows 8.1 printer drivers on 10 setups. I recommend you try the following steps: Press the Windows key + r and type control panel in the box that pops up. Press Enter. Click on the Devices and Printers folder. If you see your 127fn in there, right-click on it and remove/delete the printer. Go back to the Control Panel. Click on the Programs and Features Folder (might appear as Apps and Features). Look for your printer's software and uninstall it. Once that's completed click here and install the 8.1-friendly driver for your printer. Follow the usual prompts to complete the setup. Please let me know the result of your troubleshooting by responding to this post. If I have helped you resolve the issue and you liked this post, feel free to give me virtual props by clicking on the 'Thumbs Up' icon below and clicking to accept this solution. Thank you for posting in the HP Support Forum. Have a great day!

Laser Jet Pro MFP M476nw printing lines of nonsense until it runs out of paper

I have a Color LaserJet Pro MFP M476nw, and it has begun printing out pages of nonsense symbols until it runs out of paper. This is particularly bad when I print from a website, sometimes from emails, etc., and it is wasting tons of paper. I am extremely dissatisifed with this printer, and it is not even a year old yet. I have tried turning it off and then restarting it, but the problem comes back. Is this normal for this particular all-in-one? I bought it instead of a Brother, which I had last, and expected better for my money.

If the output is repeatable (i.e. exactly the same when reprinting the same document, using the same driver, to the same device), then it is likely that it is caused by a driver (or driver settings) fault.
There may be a more up-to-date driver available, or (depending on the printer model) you may perhaps be able to switch to a driver using a different Page Description Language (i.e. PCL5 or PostScript or PCL6 (the 'marketting' name for the PCL XL PDL), depending on which you are currently using).
If the error(s) is/are random, they are much more likely to be the result of intermittent corruptions of the generated print stream between the workstation and the device (check cables, ports, switches, etc.); it could also possibly be an intermittent problem with the printer itself.

HP LAser Jet Pro MFP M127fw not Receiving Auto FAX

I Own two HP All-in-Ones. First is an Officejet 7500A and second is an HP LaserJet Pro MFP M127fw. I hooked my Phone line to the 7500 and was able to send and receive FAX's, but no matter what I did (Including setting it to Automatically Receive FAXes), it would only receive faxes if I Manually hit the "Accept FAX" notification when the FAX Line rings. IThis means I have to make a mad Dash to the Office anytime the FAX Line Rings.... So, I purchased a new All-In-One (HP LaserJet Pro MFP M127fw) hoping it would solve the problem. Once again, I set it to Auto Receive and it will only Manually Receive. The Mad dash Continues... Some Notes:Yes, the phone line is set up in the correct plug-in.Yes, it will receive FAXes, but only if i Manually receiveYes, I have the FAX in AUTOMATICALLY RECEIVE ModeYes, it is set to receive in One Ring Help please

I Own two HP All-in-Ones. First is an Officejet 7500A and second is an HP LaserJet Pro MFP M127fw. I hooked my Phone line to the 7500 and was able to send and receive FAX's, but no matter what I did (Including setting it to Automatically Receive FAXes), it would only receive faxes if I Manually hit the "Accept FAX" notification when the FAX Line rings. IThis means I have to make a mad Dash to the Office anytime the FAX Line Rings.... So, I purchased a new All-In-One (HP LaserJet Pro MFP M127fw) hoping it would solve the problem. Once again, I set it to Auto Receive and it will only Manually Receive. The Mad dash Continues... Some Notes:Yes, the phone line is set up in the correct plug-in.Yes, it will receive FAXes, but only if i Manually receiveYes, I have the FAX in AUTOMATICALLY RECEIVE ModeYes, it is set to receive in One Ring Help please

HP Laser Jet Pro MFP M177FW - photocopy problem

Hey,
We have recently changed over the black and colour ink cartridges. The printer works fine when printing from a document on screen however when using the machine to photocopy the printing quality is really bad, to the point where you cannot read the writing as it is very faded.
Any idea what the problem might be?
thanks!

Hi jgawin,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Color Laser Jet Pro MFP M177fw can't scan or copy

I can not scan or copy. The printer is just showing a message on the display of "calibrating" I have not had any paper jams or changed any toners. I tried a hard reset to see if that would resolve the issue but it did not. I have the printer connected wirelessly. I have only had the unit for 2 weeks.

Hey @2stressed,
Unfortunately, the 'calibrating' error state that you have on your printer is a hardware issue. Therefore, any software troubleshooting (such as uninstalling and reinstalling) will have no impact on this issue.
At this time we have exhausted the support options available over the forums. I would strongly recommend that you contact our Technical Support queue by phone to explore hardware replacement options.
HP Technical Support can be reached at: 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
HP Worldwide Contact
When you speak with the phone support agent please advise them of all the troubleshooting steps you have completed and the results of those steps.
It has been a pleasure working with you. I wish you luck going forward with this!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP Color Laser Jet Pro MFP M177fw - Scanner Error 22

Printer stuck with Scanner Error 22. Bought this printer less than a month ago. Trier several cycles of powering off / on, tried settings reset etc. Error 22 still stays, scanner doesn't work. I'm looking for a refund for this, as I see this forum is filled with the same error threads with no solution being provided for a prettly long time

Hi @angelspire,
I see by your post that you are getting a Scanner 22 error. You would like to get a refund.
Please call our technical support if the issue persists, at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
Contact HP.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How do I set up the HP web services on my laser Jet Pro 200 color MFP 276nw?

I am trying to be able to print on my Laser Jet Pro 200 color MFP 276nw printer from my Galaxy Note 10.1 and am instructed to set up HP web services. I need some help to know how to do this.

Hi,
Please try a print app such as HP ePint on your Galaxy:
http://www.hp.com/united-states/campaigns/mobility/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Laser Jet Pro CM1415fnw color will not print from eprint

Laser Jet Pro CM1415fnw color printer will print from laptop but not from email. Signal on printer has strong internet connection and so does computer. I tried to send a pic with my phone but it did not print.

I will need a little more info in order to help out. If you send the printer an ePrint of a text document, will it print that plan document? Also, if the picture that you are sending is less than 100 DPI (dot per inch) the printer will not print that because of the quality. You can send the picture to the computer, open it and the right click on it and look under “properties” and it will give you the DPI information. It is labeled vertical and horizontal resolution. Lastly, what type of phone do you have? What email client are you using to send the picture to the printer?
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Laser jet pro m475 won't print through the wire

Hi laser jet pro 400 as just decided it's going to print anymore through the wire. Tried three different wires no good. It says not communicating with printer. Tried others computers and it the same.
Any ideas
Thanks Craig

Digcon,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How to print envelopes on the HP OfificeJet Pro 8600,

Hi there folks;
Recently I ran into several folks asking on how to print envelopes in the same printer The HP Officejet 8600
Do to this I decided to provide both the instructions in this document as well as the links of the article where I refer to for the information. This way folks that want to have it quick and to the point can accomplish this by reading and following this article and any folk that want to dig deeper perhaps the article will provide more in depth information
This is how to load the envelopes;
I will provide the link of the Article where this information have been gathered from;
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02890475&cc=us&dlc=en&lc=en&product=4323648&tmp...
Here the steps for loading the envelopes on the Officejet pro 8600.
Grasp the handle on the front of the input tray, and then pull the tray towards you to open it.
Figure 12: Pull out the input tray
Slide the paper width guides out as far as possible.
NOTE:If you are loading larger-sized paper, pull out the tray extension to lengthen the tray.
Figure 13: Input tray extension
Insert the envelopes into the center of the tray with the envelope flap on the left and facing up. If the flap is on the short end of the envelope, insert the envelope into the center of the tray with the flap toward the product and facing up.
Figure 14: Load envelopes
Slide the paper width guides in to rest against the edges of the envelope. Make sure that the envelope is centered in the tray.
Push the tray into the product until it clicks into place.
Figure 15: Push in the input tray
Pull out the tray extender on the output tray.
Figure 16: Pull out the tray extender
This is the explanation on how to load envelopes into the 8600. Hope is helpful
Now let’s make sure that the envelopes use are supported by the printer,
This article will also provide you with envelopes support by this printers;
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02858465&cc=us&dlc=en&lc=en&product=4323648&tmp...
Is an important to properly load the envelopes as to use only envelopes supported by the printer.
you might spend countless hours trying to figure what is the problem without realizing that the issue is the envelope you are actually using is not supported.
Here is a list of the envelopes supported by the Officejet 8600
Paper type
Paper size
U.S. 10 envelope
105 x 241 mm (4.1 x 9.5 inches)
A2 envelope
111 x 146 mm (4.4 x 5.8 inches)
DL envelope
110 x 220 mm (4.3 x 8.7 inches)
C5 envelope
162 x 229 mm ( 6.4 x 9.0 inches)
C6 envelope
114 x 162 mm (4.5 x 6.4 inches)
Monarch envelope
98 x 191 mm (3.9 x 7.5 inches)
Card envelope
111 x 152 mm (4.4 x 6.0 inches)
Chou #3 envelope
120 x 235 mm (4.7 x 9.3 inches)
Chou #4 envelope
90 x 205 mm (3.5 x 8.1 inches)
Hope this is helpful.
I welcome any comments and questions;
RobertoR
▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!
This question was solved.
View Solution.

On my OJ Pro 8600, When I go to print a # 10 envelope, it feeds the envelope through and then prints the address on a letter page. I was forced to set the printer preferences to #10 envelope, and within Word, set the paper type to # 10 envelope, set Word up for center feed, and then put everything back to print normally. ON my 6500 all I had to do was hit print. There must be a way to print single envelopes without jumping through all these hoops!!

How to Print Envelopes - HP LaserJet Pro 200 color MFP

I can't work out how to print envelopes on my HP LaserJet Pro 200 color MFP.
I put the envelope upright (flap down) in the adjustable tray at the very top of the machine (as I have done in almost every printer I've used) and it prints the address on a sheet of paper!

Hi goodgrandma ,
I see by your post that you would also like to know how to print envelopes.
I will be happy to help you.
Both the Laserjet m251 and M276 have a main tray only.
Above the tray is the jam access door to remove paper jams.
To print on the envelopes, you would need to remove all the paper from the main tray and load the envelopes in the main (bottom) tray, to print to envelopes with these two units.
If you are using Word Application, click on Tools, select Letters and Mailing/Envelopes and labels, the envelope box will open, in the envelope tab enter your address, click on Options, click the Printing Options tab, you will need to change the Feed from to Auto, it is likely set to Manual.
What is the full name and product
number of your printer? How Do I Find My Model Number or Product Number?
Hope this helps.
Thank you for posting on the HP Forums.
Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

My Laser Jet Pro CM1415fnw color - will not print ... WILL let me fax...

My Laser Jet Pro CM1415fnw color - will not print ... will let me fax... then it goes to a screen like it is thinking ....the screen shows HP.... enerystar.... and a white bar on the bottom ...then it "initializing" and acts like it wants to print something. Help

Does the printer ever come to "ready" or Home screen? If it does not then i would recommend calling support and they may be able to help you with restoring the device to factory settings. If this is constantly occuring every time you boot you may want to try upgrading the fw to the latest version. Also if it is just showing "Calibrating" very frequently in the Embedded WebServer (EWS), navigate to IP if you have it, in the "System" , "Print quality", you can can change the calibration timers and see if that helps.
I am an HP Employee.

All in one HP Laser Jet Pro 200 Color MFP (M276n) stopped working

I have an HP Laser Jet Pro 200 Color MFP (M276n) that I had installed and woking fine.
I changed my desk and removed the USB from the computer and when I plugged it in again i could not print or use any of the functions through the computer. I'm running 64bit Win 7.
I've tried unistalling the printer and downloading the laster driver package from HP.com.
But when I try installing it and come to where the installationprogram want me to connect the USB-cabel the printer doesn't show up (I can't click "Next" to begin installtion).
So right know I cant print and I can't reinstall the printer.
How do I fix this??

Make sure the usb cable is plugged in properly, the right port at the back of the printer. If still doean't work, maybe get a new usb cable?

Hp laser jet m4345 mfp its printing blank page

I got a hp laser jet 4345 mfp its printing blank pages

Hi ballard,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand the printer name is showing the Universal Printing PLC6 driver and not the Laserjet M1536.
I will be happy to help you.
During the install it pulled the Universal driver instead of the Laserjet driver.
Did you download and install the drivers?
Here is the URL for the drivers if you haven't already installed them.
HP LaserJet Pro M1536dnf Multifunction Printer Drivers. Select the operating system and click next.
Click on Driver - Product Installation Software and download the drivers.
Delete the PCL driver and install the download.
We can see if we can update the driver through the device manager if the full software was already installed from the download to get the right driver installed.
How do I get into Windows Device Manager?
Click on View and select show hidden devices.
Look for the printer entry and right click and select update the driver.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected?
Please let me know the results if you are still having issues.
Thank you for posting on the HP Forums.
Have a great weekend!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to print envelopes hp laser jet pro mfp m225dw

Similar Messages

Maybe you are looking for