How to print from a remote printer.

I have a HP computer in my office running windows XP connected by a cable to a Linksys router, also in the office is an HP all-in-one printer connected wirelessly to the router.  In the living room 50 feet away, I have another HP computer, connected wirelessly to the network, running windows XP and a smaller HP all-in-one printer.
I have been attempting to print from the office printer, using the living room computer, without success.  Every time I try, the living room printer prints the document.
Does anyone know how to configure these computers and printers to achieve the results I want, mainly printing on the office printer from the living room computer?
Aloha, Bob

Go into Control Panel > Printers.  Delete either the problem computer or both computers from the list.
Re-add them:
1. Click "Start" button --> Printers and Faxes.
2. Under Printer Tasks, click "Add Printer".
3. Click "Next" button on the Add Printer Wizard window.
4. Select "Local printer attached to this computer". Deselect "Automatically detect and install My Plug and play printer". Click "Next".
5. Under Select a Printer Port option, select "Create a new port" and select "Standard TCP/IP Port" and click "Next" button.
6. In the "Welcome to the Add Standard TCP/IP printer port wizard" make sure that the printer is turned on and connected to same network that your computer is connected to. Click "Next" button.
7. Under "Add Standard TCP/IP Printer Port" enter the printer's IP address. Click "Next" then click "Finish".
8. Now, select HP from the list of manufacturers, select your printer from the list of Printer models and click 'Next' button.
9. If you can't find your printer, you'll need to find the install CD and use the "Have Disk" option to select one of the hp*.ini files. Alternatively, you can select another HP printer model from the same type.
10. Add the print spooler name and click "Next".
11. Click "Next"
12. Click "Next" and then "Finish"
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • How to get, from a remote application, list of groups & users?

    I need to get list of groups, and users in a group,
    and profile of a user of weblogic
    from a remote application.
    Do I need to use classes from com.bea.p13n.security.management.authentication? How?

    2 ways.. u might be able to set up trust between the domains or something and then call the UserManager and GroupManager EJBs.
    Or if u are using RDBMS authentication, you can just go against the database and write u'r own queries.
    Kunal

  • How do I set up imac to print from a remote printer connected by a cable to a PC?, How do I set up imac to print from a remote printer connected by a cable to a PC?

    How do I set up my Imac to print from a remote printer connected by a cable to a PC running Windpws XP?

    Hi Duane,
    Thanks for clarifying the hardware setup. Using the S-video connection from Hi8 to the DV converter is a good workflow. If you are showing a few errant lines at the bottom, that is a by-product of analog tape and please keep in mind that they are likely in the "overscan" area which normally does not show up to the TV viewer, though you see it in the edit software because you see the full overscan image edge-to-edge. So you probably don't have to worry about that, but if it bugs you, you can use the CROP effect to remove, or create a black title overlay to "hide" that stuff. As you said earlier, you can scale the whole picture up, but that is going to soften the image, not good.
    As for shrinking the picture - this is only helpful when producing HD content (i.e Blu-ray) and mixing in some SD source material. I see this used on HD documentaries a lot. When they need to show some older SD footage, it is shown "actual size" over some sort of background. By showing the SD clip at actual size, it is not scaled at all and keeps it's quality on the HD display. If making a DVD, which is standard definition, then there is nothing to gain from this practice and it would in fact make things worse because you are reducing the resolution!
    For a 75-minute project, I would use CBR 7.0 encoding to MPEG-2 for DVD.
    Jeff Pulera
    Safe Harbor Computers

  • How to print from a planning view in APO SNP ?

    Does anybody know how to print on paper from the planning view in the planning book.
    I have made a view with a key figure.
    In the view, I can see the productnumber, the key figure and the values.
    Some users want to print it on paper.

    Hi,
    CSV method of download is the SAP standard format for saving the
    files.
    You can either create your own custom logic for saving in excel or
    use BW functionality for extracting the required fields and form a
    report to save & print in excel
    Regards
    R. Senthil Mareeswaran.

  • How to print double sided from my Mac to my Canon MG6350

    I have looked up everywhere on the internet and youtube of how to print double sided from my Mac Book Pro. I am using OSX 10.8.5.
    All of the dicussions I have looked up before have told me to go to System Preferences>Print & Scan>Options & Supplies> Driver and then tick the little box that comes up and it will allow you to print double sided. I have tried doing this but THERE IS NO DRIVER TAB!!!
    I was just wondering if there was a solution to this as I can print double sided from my other appliences, like the PC and iPad, it is just my Mac Book Pro that doesn't work.
    It has become a big problem for me as I'm studying at college and I need to print things double sided quite regularly. I really need this to work.

    The print dialog has several drop-down menus, one of which initially shows the name of the application you're printing from. If the printer supports duplex, you can choose
    Duplex Printing & Margin
    from that menu. You should then see a checkbox marked
    Automatic Duplex Printing

  • How can print a report from form 6i,  when I press a button?

    hi Friends,
    How can print a report from form 6i, when I press a button?
    When i press a button from Form 6i, the report should print through printer.
    I have done it by using report parameter DESTYPE Printer but problem is that when I press a button printer dialogue box appear and then I give command Print to printer, I don’t want to show Printer dialogue box.
    I want when I press a button form Forms 6i , printer will print my report directly.
    Please send me the solution of this problem.
    Best regards,
    Shahzad

    Hi
    If You are using Client server application then to passing to Add all Print Parameter in the Host Command.
    Means Print command in unix to Host(lp.............) and Other Parameter to file name of the report to print.
    If You not Use Client Server Application the Also Passing a Host Command in Button-Pressed Event and Run.

  • How to print report from JSP Page

    Hi Everybody,
    I am developing a simple project in JSP with MS Access. I hav some tables and reports for them. I hav a JSP page which gets inputs from user and save it in the table. Its working fine. But my problems are,
    1) I hav a button called "SAVE & PRINT" in that bottom of the page, if i click that button, the currently entered data has to save in the table and the same data has to print from the MS Access report. I dont know how to print this report from JSP page.
    2) Another button called "REPRINT". If i click that button, it has to ask a number to print the report page, that number is nothing but a field in that report.
    Could anyone help me to solve this problem.

    Hi Everybody,
    I am developing a simple project in JSP with MS Access. I hav some tables and reports for them. I hav a JSP page which gets inputs from user and save it in the table. Its working fine. But my problems are,
    1) I hav a button called "SAVE & PRINT" in that bottom of the page, if i click that button, the currently entered data has to save in the table and the same data has to print from the MS Access report. I dont know how to print this report from JSP page.
    2) Another button called "REPRINT". If i click that button, it has to ask a number to print the report page, that number is nothing but a field in that report.
    Could anyone help me to solve this problem.

  • Does anyone know how to print a text message from a bill?

    Does anyone know how to print text messages from a phone bill or view them?

    There might third party apps or iTunes or iCloud options to backup the text messages from the Apple phone itself. Then you can print the contents of the messages from the backup.
    There are similar applications for Android devices as well.

  • How to print different pages of sap script  from diff. trays of printer

    Hi All,
    I have the requirement in SAP script. How to print different pages from different trays in the printer.
    For example  page 1 logo and address has to print from tray-1,
                        page 2 main data print from tray-2,
                        page 3 footer data print from tray-3.
    will appreciate if u come up with solutions asap.
    Thanks in advance.

    Hi,
    May be the links given below might help you,
    SAPScript:Selecting Different Tray in SAPscript
    Print to different output tray in SAPscript/Print Workbench
    Regards,
    Hema.
    Reward points if it is useful.

  • How to print from iPhone 3GS with OS 4.2.1?

    Hello,
    I have searched and read through the discussion forums, but I'm not sure I understand how to print from my iPhone.
    In reading the manual for the iPhone 3GS, specifically on page 44, it says the following:
    AirPrint uses your Wi-Fi network to send print jobs wirelessly to your printer. iPhone must be connected to the same wireless network as the AirPrint printer.
    My HP printer (Officejet Pro L7555) is plugged into my Airport Express so that I can do wireless printing. (I am also using an Airport Extreme for the WiFi network in my house).
    When I have, for example, an email on my iPhone that I am reading, if I tap the "reply" button, I do see the "Print" option appear. When I tap on "Print", it brings up a screen where it says, "Select Printer". I then tap on that, and it will then say, "Looking for Printers".
    The final outcome is "No Printers Found".
    Since I am following the instructions on wireless printing as found on page 44 of the iPhone 3GS handbook (with OS 4.2.1 software), I'm not sure what it is that I'm doing wrong. I can print wirelessly with my iMac and my MacBook Pro to my HP printer just fine. Everything in my home is on the same network (my iPhone, iMac, iTouch, and MacBook Pro) that the printer is on.
    I'm sure I'm missing a big chunk of the puzzle somewhere that the manual is missing. Can someone please let me know what additional steps I must take in order to print from my iPhone 3GS while I am at home on my own network?
    Thank you very much.

    From one Andy to another Andy (LOL):
    Okay, thank you for the information. I even searched the Store web page before asking my question, and somehow missed this.
    Well, I'm not about to go and buy ANOTHER Apple toy just to print from my iPhone. For now, I think I can stick to the old-fashioned way and just forward it to myself so that I can print it from the iMac. I just got Apple TV a few days ago, so I'll have to wait a little bit for the next toy.
    Thank you very much for the prompt answer.
    Andy Smith
    Pleasanton, CA

  • How to print from the ipad 2?

    Can anyone tell me how I can print from the Ipad 2?

    How to print from iPad 2
    1. Buy a AirPrint enabled printer; see list below
    http://support.apple.com/kb/ht4356
    2. Run the CD provided and setup as network printer; this will setup your printer to the same network as your iPad
    http://i1224.photobucket.com/albums/ee374/Diavonex/1a30ee42.jpg
    3. Start printing from your iPad without wire
    http://i1224.photobucket.com/albums/ee374/Diavonex/93ec77e5.jpg

  • Anyone know how to print from Win2K or WinXP to shared printer on iMac?

    Help! Anyone know how to print from Win2K or WinXP to shared printer on iMac? I have a new IMac hosting a Canon iP4300, a pc running W2K & a pc running WXPsp2. All computers recognize each other and the iP4300 on the network and can share files. All Mac "Windows Sharing" & "Printer Sharing" preferences sre set correctly. Apple says the printer must be configured on the Windows computers as an SMB/CIFS network printer using a Postscript driver. I can find lots of pages on the net telling me I what needs to be done, but nothing stating how to do it. All the info I've found is either overly simplistic and or relates to the 10th dang of enterprise server administration. Would VERy much appreciate any help at all.
    Victor

    Please search the discussions before posting. This question has been asked many times before and you could save yourself time.
    http://www.ifelix.co.uk/tech/3012.html

  • How to print from iweb

    Does anyone know how to print out of iweb, preferably all the pages in sequence to a single pdf file.
    Thanks

    Old post from 5 yrs. ago--wow. I guess this is still not possible. Would sure like to be able to do this. You can choose PRINT, then save as PDF from the print dialogue box, but it only saves the current page and does not show the background color/image.

  • How to print from iPad mini to a Cacon imagePrint MF4880dw

    Just bought this Canon all-in-one, and after installing it, found that was not compatible with air print. There seem to be several possible solutions to print to it from my iPad mini. What do the experts feel is the best way to print documents?

    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    How to Print from Your iPad
    http://www.dummies.com/how-to/content/how-to-print-from-your-ipad.html
    How do you print directly from the iPad
    http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-print-documents-direc tly-from-ipad.html
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
    Print (Print to ALL Printers) ($1.99)
    https://itunes.apple.com/us/app/print-print-to-all-printers/id299423224?mt=8
     Cheers, Tom

  • HP LaserJet M1132 MFP does not print from a remote desktop

    Hi,
    I have a HP LaserJet M1132 MFP (product number CE847A) connected to a PC (MS Windows XP Home Edition + SP3) via USB. There is no problem with the printer. However, when the connection using Remote Desktop (it's set to use local facilities and resources, or in my case, printers, and serial ports) to the server (MS Windows Server 2008 R2), I can not even print a test page from a remote desktop.
    Error message: "Print a test page failed. Do you want to display a tool to solve problems with printing to get help?"
    But it does not lead to nowhere, as expected is access to the internet, and I have not it from a MS Windows Server 2008 R2.
    The same error is for the HP LaserJet M1120n MFP.
    I have installed on my PC other printer - old OKI ML321 (needle) connected to a PC using LPT cable and network printer Konica Minolta 1690MF (in another room). In both of these printers can easily print a test page from a remote desktop.
    Please help me.
    This question was solved.
    View Solution.

    Thank you for your interest.
    The situation is a bit different than the picture. Windows Server 2008 R2 is available through the WAN. LAN is plugged into the PC-1, PC-2 and Konica Minolta printer. HP LaserJet M1120n MFP is connected via USB to the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC-1 has access to Konica Minolta printer via the LAN. PC-2 also has access to Konica Minolta printer via the LAN. PC-2 is also available for PC-1 HP and OKI.
    It seems to me that I found the explanation for the printing problems - some of "my" printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:
    http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800d-2d9f-1f0c-225cabd6838e&bCatID=128...
    http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=128...
    http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8dbb-9e95-11dc-3575d569acc2&bCatID=128...
    http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8d51-dcbb-7664cbc17a89&bCatID=128...
    I think I can close the topic.
    (translated from Polish into English using Google translator)

  • How to print on HP deskjet 100 mobile L411 from android tablet

    How to print on HP deskjet 100 mobile L411 from Asus Transformer android tablet
    Pablo_B

    Hi,
    You can use Printshare app on your tablet. I believe you have to pay a small amount for it:
       https://play.google.com/store/apps/details?id=com.dynamixsoftware.printershare.premium&hl=en
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Import from version 2.0 not COMPATIBLE

    i'm not sure it's a bug so i post it here. i tried to import an application from htmldb.oracle.com (new version) to my htmldb ( version 1.6) when i need to install the application it give me an error: NOT COMPATIBLE (Your export may contain calls not

  • It is not possible to work with SO becauce tis crashed during the convert

    Hi! The base-System is a original Debian 3.1 (Sarge) , I installed the SO8 above the rpm-database (mkdir /var/lib/rpm; rpm --initdb) install with the Gfx-Installer, and later with the setup-script - now I have SO 8 update 3 rev 2. But it is not possi

  • BBz10 internet add to home screen not working !!!

    the option to add to home screen is not working, when i choose this from the options it says added to homescreen after saving, but not showing icon on home screen, can anyone help please. Solved! Go to Solution.

  • Glue to shape geometry in Visio 2013

    I need to glue connectors to shape geometry and I don't get it to work in Visio 2013. They just glue to the whole shape. Staffan Söderholm

  • Authorizing Macbook in iTunes

    Hey. I received a Macbook for a Congratulations present, and left the country for 6 months to work and travel. In my haste of packing, I do not remember ever registering my Macbook in any way, shape or form. I had only recently been introduced to Mac