How to print from windows 7 pc on time capsule network?

I added a new pc with windows 7 on my time capsule network. Existing network includes 2 macbook pros and 1 mac mini with boot camp and windows xp. I have been using the windows xp with bootcamp on the mac mini and printing from it for a couple years. We don't share files between the notebooks and mac mini, just internet access and printing. My bootcamp side got too full which is why I added the new windows pc (yuk) for my windows programs but I cannot figure out how to get the windows pc to recognize my printer connected to airport time capsule. I installed the printer software and drivers and connected it with usb and printed but when I connect the printer back to time capsule the pc doesn't see it. Also, I downloaded bonjour from apple site but still no go. Any help is appreciated. As you can probably tell, I only know enough to be dangerous. That's why I love my Macs, they just work!

The problem is you loaded the printer directly and now do not have it plugged in.. so delete the printer in the control panel.. then setup the printer again.. this time connect to it as network printer. The bonjour should make it available as a network resource..
Tell me if you still run into trouble doing that. You may need to load the IP of the TC manually..
Window7 has higher security level than xp.. and that can sometimes also cause issues.
Are you using SMB compliant names for the TC, wireless and printer??
Can the windows 7 computer get internet via the TC? Can you ping it?
Look up how to reduce the security level in windows to match xp.. I don't remember the details but you have to do some nifty footwork.

Similar Messages

Is it possible to print from iphone 5 through time capsule on wi-fi, usb connected to printer (no AirPrint support)?

Is it possible to print from iphone 5 through time capsule on wi-fi, that is usb connected to printer (no AirPrint support)?
I can print on the same printer on my Macs...was wondering if I could do the same with iOS devices?

Try Printopia. There is a free trial, so it will cost you nothing to find out if it works.
Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...

HT4356 how to print from windows usb printer

I want to print from my ipad mini. I have a HP usb printer that is not wireless. Any software available that will allow me to print?

How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

How to print from different wireless connection on same network

I can print wirelessly when I am in range of the wifi to which my computer and attached printer connect. However, when I go to a different wifi connection within the same network, I cannot print. How can I my wifi connections on same network talk to each other so that I can print from second wifi site on same network?

The problem is you loaded the printer directly and now do not have it plugged in.. so delete the printer in the control panel.. then setup the printer again.. this time connect to it as network printer. The bonjour should make it available as a network resource..
Tell me if you still run into trouble doing that. You may need to load the IP of the TC manually..
Window7 has higher security level than xp.. and that can sometimes also cause issues.
Are you using SMB compliant names for the TC, wireless and printer??
Can the windows 7 computer get internet via the TC? Can you ping it?
Look up how to reduce the security level in windows to match xp.. I don't remember the details but you have to do some nifty footwork.

How to print from an Ipad2 3G without changing networks?

I bought my elderly parents an Ipad 3G for Christmas because they cannot get anything but dial-up service at their home for a computer. We also bought an HP printer with AirPrint and e-Print. However, in order to print to the printer, you must turn off the 3G network and enter a wireless network that the printer is on. Well, going into setting and changing every time they want/need to print is simply to technical for them. is there any way to print directly to the printer, wirelessly, using either the AirPrint or this e-Print that HP has? Has anyone written a 3rd party app that will do this? Why doesn't Apple fix this issue since people are paying very expensive prices plus monthly fees to have the 3G versions so they can gain internet access. IMHO, without the ability to print to a printer while on the 3G and connected to the internet, the thing is near useless. Apple has really dropped the ball, here, and I think that this is very unlike Apple not to have thought of this.
Does anyone know of an app that when you need to print and push print, will automatically switch to the printer network, send the file to the printer, and then swithch back. I think this is a poor way to do this, but at least it is a way to do it that won't require my parents to get all upset trying to go into settings and fool with turning networks on and off.
Thanks,
JJ the mustang man

JJ-
I do not have the 3G model. Is this a real problem, or just one you are worried will happen? I was under the impression that the 3G iPad would change its Internet connection between WiFi and 3G as needed, but would continue to print via WiFi regardless of how it accessed the Internet.
Fred

Can not print from my pc using time capsule's printer, but the mac in the office will. PC sees the network just not the printer connected to the capsule.

I can't get my pc to see the printer connected to the time capsule, it sees and connect to the network but will not see the printer. The mac in the office see both the network and the printer connected to the capsule.

Suggest that you check to make sure that you installed Bonjour Print Services for Windows v2.0.2 on the PC.
Run the program and hopefully it will find your printer so you can select it and click to get things going.

Time Capsule: "Network name no longer available" error when copying files

Hi!
I've come upon this error when trying to copy files from my PC to Time Capsule:
"Network name no longer available".
This seems to happen only on folders that have image sequences in them (.sgi image sequences).
I was planning on transferring the content of my PCs hard drive to Time-Machine in order to smooth out the migration from my old PC to my new MBP but I have to say that I'm a little less confident about using TC as a storage space for my valuable files.
Is there a work around for this? I have tons of folders with .sgi image sequences and it would be a real shame not to be able to transfer them to Time Capsule.
Please help!

Hi… I don’t think there should be any such limitation for the file transfer wirelessly. However it can be issue, as you wired is connect at a speed of 100 Mbps and wireless connects to the max at 54 Mbps. Try to upgrade the firmware. Also try reducing Fragmentation Threshold and RTS threshold by 40 each under advance wireless settings on the router. Go to www.speedguide.net, and download the TCP optimizer. Try reducing the MTU of your wireless adapter. Please Revert Back, even if this resolves your issue.

I can no longer print from windows pc via mac/time machine in lion. Does anyone know why, I can no longer print from windows pc via mac/time machine in lion. Does anyone know why

I can no longer print from windows pc via mac/time machine in lion. Does anyone know why or how to fix? I have print sharing ticked and printer is HP laser jest 2550.

I finally found a log file... unfortunately, it doesn't help me figure out what's wrong... but maybe it will mean something to one of you?
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding start banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding job file of type application/postscript.
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding end banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Queued on "SUTTER_WG" by "kristophermiller".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstoappleps (PID 335)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstocupsraster (PID 336)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/rastertoepson (PID 338)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started backend /usr/libexec/cups/backend/smb (PID 339)
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster unsupported colorSpace: colorSpace = -1, colorOrder =1, bitsPerColor = 1
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster: got an error from cupsRasterInterpretPPD
E [10/Dec/2007:20:23:36 -0500] [Job 11] No pages found!
E [10/Dec/2007:20:23:36 -0500] PID 338 (/usr/libexec/cups/filter/rastertoepson) stopped with status 1!
I [10/Dec/2007:20:23:36 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
E [10/Dec/2007:20:23:36 -0500] [Job 11] Job stopped due to filter errors.

Anyone know how to print from Win2K or WinXP to shared printer on iMac?

Help! Anyone know how to print from Win2K or WinXP to shared printer on iMac? I have a new IMac hosting a Canon iP4300, a pc running W2K & a pc running WXPsp2. All computers recognize each other and the iP4300 on the network and can share files. All Mac "Windows Sharing" & "Printer Sharing" preferences sre set correctly. Apple says the printer must be configured on the Windows computers as an SMB/CIFS network printer using a Postscript driver. I can find lots of pages on the net telling me I what needs to be done, but nothing stating how to do it. All the info I've found is either overly simplistic and or relates to the 10th dang of enterprise server administration. Would VERy much appreciate any help at all.
Victor

Please search the discussions before posting. This question has been asked many times before and you could save yourself time.
http://www.ifelix.co.uk/tech/3012.html

Can't print from Windows Explorer

After installing the "HP Officejet Pro 8600 e-All-in-One Printer - N911a", on a Windows 7 64-bit PC, that is Ethernet connected, I get the following error message:
Script Error
An error has occurred in the script on this page.
Line: 2061
Char: 1
Error: Invalid procedure call or argument
Code: 0
URL: res://ieframe.dll/preview.js
When I try to print from Windows Explorer; however, I can print from other applications such as Word and Quicken OK, and I can print from Explorer OK from a Windows XP PC. Anyone have any suggestions?

The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it. Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
2) Select each printer profile for the printer with an issue, then select remove device/printer.
3) Reboot
4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
6) Test by printing google.com (uses very little ink when the test page comes out).
Let me know if you have any questions or issues.
Thanks,
Dan
I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Can't print from Windows to Mac

I've always had trouble printing to a printer attached to my Mac from Windows. Bonjour used to see the printer, but I could only occasionally actually print. For a while everything but PDFs worked, then even text stopped. As a last resort I tried the "reset printing system" option in System Preferences and then re-added the printer, but now Bonjour doesn't see it at all. I can browse to it via SMB at \\macname\printername, but all I can do is print a test page as Administrator. Regular print jobs and non-admin test pages just disappear - not in the queue on either client or server. Setting it up as an IPP printer instead didn't help.
I'm at the end of my rope here, and any troubleshooting tips are welcome. I'm an IT guy, so technical details are very welcome: TCP ports to check for listeners on, services to look for, registry settings on the Windows end, anything.
Details:
Server:
Mac OS X 10.6.2
HP Photosmart D7560 printer connected via USB using HP Photosmart driver
Clients:
Windows XP, Windows Vista (32-bit), Windows 7 (32-bit and 64-bit)
All on the same LAN (wireless), no trouble with TCP/IP connectivity (can ssh into the Mac from the Windows boxes, etc). Both Windows Firewall and UAC are turned off on the Vista/7 boxes, guest access is enabled on the Mac in Sharing preferences...
Any help welcome.
Thanks!

I followed the instructions at http://www.ifelix.co.uk/tech/3012.html and am having the same issue. Whether setting up manually or using Bonjour, it seems that you have to select an Apple Driver. The problem is that the Windows 7 does not provide Apple drivers. Luckily, I have an old XP installation CD so I can access the printer drivers I need, but because I already installed the printer drivers from my printers CD Windows will automatically install with that driver, not giving me the "have disk" option.
So I tried to install with Bonjour again, which allowed me to pull up the drivers from teh XP installation disk, but then gave me an error that I didn't have permissions to install the selected printer.
So I deleted the Canon driver for my printer from Windows 7 and went through the process described at http://www.ifelix.co.uk/tech/3012.html again. This time I was able to select the Apple Color Laserwriter printer from the XP installation CD, but I got an error message saying that Windows was unable to find an appropriate driver.
At this point, after a couple hours trying to do a simple file share, which should only take 30 seconds, I'm giving up being able to print to a printer connected to a mac from my Windows 7 laptop. Now I have to open files on the mac from the network file share to print.
Mixed having both Macs and Windows machines on the same network is a recipe for a headache.

Running windows on imac can't print from windows

I'm running windows on my imac because quicken and quickbooks for mac *****. I can't print from windows. when I go to the printer troubleshooter it sees my printer but tells me to turn it on. When I try to print from quickbooks or quicken, it gives me a printer communication error. help

There have been some patches from Quicken to address these issues, make sure you have the latest updates. Quicken says only Quicken 2010 is supported in Windows 7 but suggests the following workaround.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printing from Windows XP to Mac mini

Hi,
May i know who has a successful story of printing from Windows XP to Mac or from mac to window xp.
I have tried all the instructions in the book, and it doesn't work.
I am printing from my mac mini to our printer in the office who has xp on it.
The printer is canon i560 but it doesn't work.
Please share with me what your expereinces is.
Thanks

Take a look at this article
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh2231.html
Also make sure you have set up your windows computer to share your printer. I have my mac mini printing wireless through my us robotics router on my windows xp printer. Print with it all the time, never had a problem.

Cannot print from Windows XP in Boot Camp

I rarely boot into Windows using Boot Camp. Usually will use Windows as a VM with VMware Fusion.
Now I am unable to print when in Windows/Boot Camp!
Yes, I can print just fine in Mac & in Windows as a VM.
My Boot Camp installation of WinXP is the same one I use as a VM.
I wonder if I changed some printer setting long ago & forgot. I am fairly certain I used to be able to print from Windows/Boot Camp.
From: Windows XP/Control Panel/Printers & Faxes/My printer/properties/Ports
The last port/box in the list is checked, “TPVM: ThinPrint Print Port for VM”
I thought this may be incorrect for when I am in Windows using Boot Camp so tried changing it to LPT1 & then LPT2 & LPT3 & no real help. However, when using
TPVM: ThinPrint Print Port for VM, When I attempt to print, nothing happens & no print job appears in the print queue. (See what’s printing) If I change the port to LPT1,2 or 3, than the job DOES appear & under status says “error.”
I think I need to change some setting when I boot into Windows via Boot Camp vs. Start Windows as a VM.
What is the problem?
Thanks!

Thanks but, no help.
I did set up printer sharing. Even though I only have one computer I still share the printer between the Mac & WIndows on the Mac in both VM & BC.
On Mac: System Preferences/Print & Fax, I do have the box checked “Share this printer on the network.” Under Sharing Preferences I have checked; Printer sharing, Scanner sharing & file sharing. Users: Everyone Can Print.
If I remember correctly, b4 I had set up printer sharing, I was unable to print from Windows as VM. It would send the print job over to the Mac side & would not print. Then I used to go into the sys tray on Windows & change something re the printer (I forget what) but essentially telling Windows to use this printer or activate it. Then when finished -- If I forget to undo that change, it would not print on the Mac side. Setting the printer to share fixed that so, I can easily print Mac or Windows VM. Again, I very rarely boot into Windows/BC but I would like to be able to print when I do.
It may be similar to use of the optical drive for DVDs/CDs. If I am in Windows/VM The Drive doesn't work until I go into some menu (Virtual Machine?) & enable the drive & then I must disable it to get it back working for Mac.
I am going to try DVD & CD sharing & see if that fixes it so I can use the drive in both Mac & Windows VM w/o having to bother to change settings back & forth, Then I will see if doing that somehow breaks the DVD/CD drive for Windows/BC.
Maybe I need to uncheck printer sharing in order for the printer to once again work on Windows/BC?
Or maybe since I enabled printer sharing, I must somehow tell my Mac or tell Windows that all 3 can share; Mac, Windows/VM & Windows BC? I’m sure if I had 3 different computers I would need to somehow tell the system which computers are authorized to use my Network printer. Maybe since Windows BC is never online/running at the same time as the Mac, it was not recognized?

How to print from an iPAD to a wireless Canon printer attached to my PC without Airplay

Please advise how to print from an iPAD Retina to a wireless Canon printer attached to my Windows PC without Airplay.
Also how best to get photos from my PC to my iPAD (other than via an SD card)
Thanks
Never used a support community before - [email protected]

more helper apps see
http://www.howtogeek.com/102671/how-to-enable-airprint-for-ios-printing-from-any -mac-or-windows-pc/
Generic Software:
You can connect the printer to a computer and install software on your iPad/computer to print from your ipad to the comptuer then to the printer.
example:
http://www.ecamm.com/mac/printopia/
Should you have some office printer that are connected to a computer there are print enablling applicaionts you can run on the iPad to print to such printers.
For Windows, try: PrintBreau, or PrintCentral.
PrintCentral Pro
http://itunes.apple.com/us/app/printcentral-pro/id426362921?mt=8
Source: https://discussions.apple.com/thread/2729284?start=0&tstart=0
Thanks to AirPrint Hacktivator you can turn any printer connected to your Mac or Windows PC into an AirPrint compatible printer. from:
http://osxdaily.com/2010/12/01/make-any-printer-airprint-compatible/
this google query will give you more options
ipad airprint via mac
Buy another box
"The xPrintServer-Network Edition is a 'plug-and-print' hardware print server for printing from Apple iOS devices running iOS version 4.2 or higher. The device is roughly the size of an iPhone and uses the iOS native print menu. It requires no additional applications, software downloads, or printer driver installations and automatically discovers available networked printers supporting JetDirect / AppSocket, LPD and IPP protocols."
http://www.smallnetbuilder.com/cloud/cloud-devices/497-lantronix-shipping-airpri nt-server
A simple and popular way to copy files.
http://wiki.dropbox.com
Using iTures to transfer files:
http://support.apple.com/kb/HT4094?viewlocale=en_US&locale=en_US
Look in the app store for accessing Windows File servers.
for example:
http://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8
Configure WebDave on your server.
This thread has good info.
https://discussions.apple.com/thread/3708341?tstart=0
How to transfer files from your iPad to your PC with iPad to Computer Transfer
http://www.iphone-mac.com/how-to-transfer-and-sync-contents-from-ipad-to-pc.html

How to print from windows 7 pc on time capsule network?

Similar Messages

Maybe you are looking for