How to: Print large dataflows

When we print complex dataflows (like a multicube with 10 cubes) then the graphical view of the dataflow can not be viewed on a reasonable scale. Also, the dataflow can not be correctly saved as JPG nor can it be printed.
In such a case, only the leftmost cubes are displayed correct, whereas the rightmost cubes are drawn as rectangles but without any text in them.
Any tips on how this problem can be solved?

Hello T.Jans-Beken,
How r u ?
In the Show data flow screen, zoom it to your desired level and then select the option to save as JPEG file. It will save in that size. So you can see that.
We have a horizontal dataflow from 19 DataSources to 19 ODS objects then to 3 ODS, then 3 InfoCubes and a MultiCube. We did like that.
Hope this helps....
Best Regards....
Sankar Kumar
+91 98403 47141

Similar Messages

How to print large image across several pages?

After using Appleworks for years I finally got Pages 09. In AW I used to be able to use drawing app to print large (36 x 36) images over several pieces of paper, simply by adding pages to the document. I would then tape the pages together to form the large poster. I can't see anyway to do this in Pages. It won't let you print any larger than 11x17, nor let you add pages to a layout to print a large image. Anybody know how to do this, or did I just waste my money?

Welcome to Apple Discussions
Yvan Koenig discovered with iWork '08 that you can span images across pages in a Numbers document as a substitute. Select & delete any tables & then treat the Numbers document as a draw document. You shouldn't need to add pages like in AppleWorks as Numbers adds them as needed to display all of the content.

How to Print Large PDF on multiple sheets

I want to print a file 41" x 55" on multiple sheets of paper, how do i accomplish this? I have tried and i only get one page with only one small section of my painting/drawing. Need help!

Can your printer driver tile pages?
I can suggest that you place divide (slice) the file and place each component on a page in a page layout document (InDesign, XPress).
Neil

How to print large jpeg image on multiple sheets of paper?

I have aa Photosmart 8250 and I need to print a large jpeg photo of a wiring harness onto multiple sheets of letter size paper for clarity sake. I need the large image printed os say 8 sheets of paper in landscape mode so when you combine the sheets you have a large and accurate image. Can this be done under windows 7 64 bit? I seem to recall under XP with the HP software that you could do this, I need to do this now, under windows 7 64 bit if possible. Thanks in advance.

You can use an alternate driver with the features you want. Download the Officejet 8500 driver from HP here. When the installer prompts you to connect the printer select the checkbox for unable to select the device. After the driver has been installed click Start, Devices and Printers, right click on your Photosmart 8250 and select Printer Properties, Ports and find which port the 8250 is using. Note this for later. Next cancel this and click Add a Printer. Select the same port as you found previously for the Photosmart 8250, Next, then choose HP and the HP Officejet Pro 8500. Print a test page when you are done to verify the printer is working properly with the new driver. You can then print to this instance of printer and select Poster Printing in the main page from 2x2 sheets up to 5x5 sheets.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How 2 print large characters using dos

i need 2 print a column in large characters while generating the report. i have to use dos printing only.

I assume by 'dos' you mean you can't go through a printer dirver but must write to a printer port (LPT:) directly.
In this case, your ony hope is to find the doc. for the printer and see what support it has. HP printers hava a language (there's HPGL, but also a simpler one for small printers), and then of course there's PostScript.
This used to be the way everyone did printing 'til it was hidden from us by printer drivers
Good luck!

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

How do I get my 5520 series printer to print larger print, from pdf file. I'm using windows 7

I am trying to print a pdf file. I want the print Larger and fill more of each page. How do I set my printer for this?
Thank you

Hi,
Please:
(a) Open PDF file,
(b) Click print,
(c) select 130% in the box:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Newsstand app how to make the print larger

Hi - I have download a magazine however how do I make the print larger. I am not finding the option.

It sounds like you'd be fine if you just separated the print function from your "Yes" button. It will require a 2nd button click from the user but that would be the only inconvenience.

HT1150 My question on printing is how do you make the print larger than it actually is on paper or is that possible? I know you can enlarge print on the screen, that is easy, but once it prints it's always to small. How can I make it bigger or is that p

my question is on printing. i know that you can make the print larger on the screen by adjusting it, but then when it comes out on paper it's just as small again. how do I set my actual printer or my iMac to print the actual paper print larger?

Hello, it depends what App & Document type, some say PDFs have the font stuck at a certain sise, but say in Text Edit, open a document, Highlight some text the CMD+a to Select All, then type CMD+t to get the Font/Text size menu, select a bigger size.

How to print email in a larger font with my imac

i just bought an iMac. i can enlarge my fonts on screen (i am not young!!) but i cannot figure out how to print out messages in a font that is not ridiculously small.

stoner3270 wrote:
i just bought an iMac.
Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked. Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.

How to print envelopes on the HP OfificeJet Pro 8600,

Hi there folks;
Recently I ran into several folks asking on how to print envelopes in the same printer The HP Officejet 8600
Do to this I decided to provide both the instructions in this document as well as the links of the article where I refer to for the information. This way folks that want to have it quick and to the point can accomplish this by reading and following this article and any folk that want to dig deeper perhaps the article will provide more in depth information
This is how to load the envelopes;
I will provide the link of the Article where this information have been gathered from;
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02890475&cc=us&dlc=en&lc=en&product=4323648&tmp...
Here the steps for loading the envelopes on the Officejet pro 8600.
Grasp the handle on the front of the input tray, and then pull the tray towards you to open it.
Figure 12: Pull out the input tray
Slide the paper width guides out as far as possible.
NOTE:If you are loading larger-sized paper, pull out the tray extension to lengthen the tray.
Figure 13: Input tray extension
Insert the envelopes into the center of the tray with the envelope flap on the left and facing up. If the flap is on the short end of the envelope, insert the envelope into the center of the tray with the flap toward the product and facing up.
Figure 14: Load envelopes
Slide the paper width guides in to rest against the edges of the envelope. Make sure that the envelope is centered in the tray.
Push the tray into the product until it clicks into place.
Figure 15: Push in the input tray
Pull out the tray extender on the output tray.
Figure 16: Pull out the tray extender
This is the explanation on how to load envelopes into the 8600. Hope is helpful
Now let’s make sure that the envelopes use are supported by the printer,
This article will also provide you with envelopes support by this printers;
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02858465&cc=us&dlc=en&lc=en&product=4323648&tmp...
Is an important to properly load the envelopes as to use only envelopes supported by the printer.
you might spend countless hours trying to figure what is the problem without realizing that the issue is the envelope you are actually using is not supported.
Here is a list of the envelopes supported by the Officejet 8600
Paper type
Paper size
U.S. 10 envelope
105 x 241 mm (4.1 x 9.5 inches)
A2 envelope
111 x 146 mm (4.4 x 5.8 inches)
DL envelope
110 x 220 mm (4.3 x 8.7 inches)
C5 envelope
162 x 229 mm ( 6.4 x 9.0 inches)
C6 envelope
114 x 162 mm (4.5 x 6.4 inches)
Monarch envelope
98 x 191 mm (3.9 x 7.5 inches)
Card envelope
111 x 152 mm (4.4 x 6.0 inches)
Chou #3 envelope
120 x 235 mm (4.7 x 9.3 inches)
Chou #4 envelope
90 x 205 mm (3.5 x 8.1 inches)
Hope this is helpful.
I welcome any comments and questions;
RobertoR
▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!
This question was solved.
View Solution.

On my OJ Pro 8600, When I go to print a # 10 envelope, it feeds the envelope through and then prints the address on a letter page. I was forced to set the printer preferences to #10 envelope, and within Word, set the paper type to # 10 envelope, set Word up for center feed, and then put everything back to print normally. ON my 6500 all I had to do was hit print. There must be a way to print single envelopes without jumping through all these hoops!!

How to print selection only

I saw this question on another forum and realized that I have no idea how to print 'selection only'. The only options in the file>print menu are for the pages desired. I see no way to print only the selected portion of a page. There must be a way, but I do not seem to be able to find the answer.
Thanks, Fran

I tried it with 'Grab' but the printout was too large. I then discovered that if you use 'Snag It' you can accomplish the same thing. Press Shift-command-3 for the whole screen or Shift-command-4 for a part of the screen. this creates a PNG image which when opened in 'Preview' can be printed. Rather complicated, but it does work. Thanks for steering me in the right direction.
Fran

HOW TO PRINT THE MATTER IN FOR ALL ENTRIES

HI HOW T PRINT THE FOR ALL ENTRIES MATTER

Hi Naresh,
You can only use FOR ALL ENTRIES IN ...WHERE ...in a SELECT statement.
SELECT ... FOR ALL ENTRIES IN itab WHERE cond returns the union of the solution sets of all SELECT statements that would result if you wrote a separate statement for each line of the internal table replacing the symbol itab-f with the corresponding value of component f in the WHERE condition.Duplicates are discarded from the result set. If the internal table itab does not contain any entries, the system treats the statement as though there were no WHERE cond condition, and selects all records (in the current client).
For example:
SELECT * FROM sflight INTO wa_sflight
FOR ALL ENTRIES IN ftab
WHERE CARRID = ftab-carrid AND
CONNID = ftab-connid AND
fldate = '20010228'.
This condition, return all entries of the sflight.
When using FOR ALL ENTRIES the number of matching records is restricted to the number of records in the internal table. If the number of records in the database tables is too large then join would cause overheads in performance. Additionally a JOIN bypasses the table buffering.
Thanks,
Reward If Helpful.

How to print a page of labels in pages

Where and how to print a sheet of mutiple labes in pages.

I have managed to open Address Book... then select say the USA group or other... go to file, print, style: mailing labels, then Layout and chose A4 page and Avery ref. On the left I see all the addresses as they will look on the label. So far, so good. However... how do I make the COUNTRY appear on the labels... I have typed it in at the end of each address, but it does not show on the label and then I have to write in individually... when you have a large number it is inefficient... surely there must be an answer to this?! Can anybody help?!

Epson Stylus Photo R2400 won't print large pages?

I recently upgraded to Mac OS X Leopard. I immediately had problems with printing to my Epson Stylus Photo R2400 as a print driver gutenprint had suddenly replace my Epson driver when going thu dialog to print. Called and Epson and they got me thru process of getting rid of the newly replaced gutenprint to an Epson driver. Problem is I can't print anything larger than an 8.5x11 page. The printer set up says and shows me that what I have set as an 11x17 or 13x19 is going to print. But all that prints on this large expensive paper is an area 8.5x8.5. No matter what I change in set up. Epson says they have done all they can do. (And I just found out last week they have replaced this printer with another printer). I have hundreds of dollars in newly purchased inks and I am wasting expensive paper.
Also I had to remove the patch for OS leopard to get the printer to work in this diminished capacity.
And my email signature disappeared. Can't get that back either.
But printer is my biggest problem. Any suggestions how to get this printer to work with this new OS leopard and print large sizes? I have deadlines and hate to outsource the printing when I could easily do it in house.

Well, you picked the very hardest way to do it, and as time goes on, you will probably discover many other things wrong with your system as well. You CANNOT go back to Tiger from Leopard via an archive and install; you have to wipe the drive and start over from scratch, and then transfer all your data over from a backup and reinstall most, if not all, of your applications so the right elements are in the right places. Even so you'll never get your system exactly back to where it was, unless you had a perfect bootable Tiger backup (via SuperDuper) and merely restored from that. Obviously whatever Leopard element that killed your printing capability is still on your frankenstein system of BOTH Tiger and Leopard parts.
There are hundreds of posts on the issue of reverting to Tiger from Leopard, many quite detailed. So many things are changed from upgrading from one to the other that what you attempted (unless you completely wiped the drive and all your data) has always proven disastrous, which is why I highly recommended against it after reading hundreds of horror stories here.
I suggest doing a search at downgrading from Leopard to Tiger, following those instructions if you can, and making the best of it. You'll find that springing the $200 for an external drive would have been a much better and easier solution, because it can come in very handy if you ever need to do any maintenance on your internal hard drive, or if some update or problems kill your internal drive and you can't even boot the system. Not to mention sooner or later always needing more storage capability, and even a drive for reliable backups.
I would never dream of attempting a downgrade or needing to do it in the first place (having taken precautions as to never have to), so I can't give you any further advice than that.

How to: Print large dataflows

Similar Messages

Maybe you are looking for