How to print more than one page at a time

I have not seen any place on the scanner where you can set the number of pages you want to print. I am using a hp diskjet 3050.
thank you

on my other hp scanner and copier i could set the no of copies i wanted. on this one i cannnot find that option.
thanks for the reply

Similar Messages

  • I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

    I have an HP Photosmart C4180 all-in-one, printer, scanner and copier.  I can't figure out how to scan more than one page?  It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement.  Any ideas??
    Thank you, Jetteski

    Hello Jetteski,
    Hello Jetteski, Thanks for the post.
    Since you are running a MAC, check the below links for some excellent information on scanning.  Good Luck!
    http://goo.gl/M8Cl2
    http://goo.gl/cufK6
    http://goo.gl/OTQoR
    I work for HP but my posts and replies are my own....Thank you!

  • K5400 will not print more than one page at a time.

    The K5400 Office Jet Pro will not print more than one at a time when I change the number of pages to print in Printing Preferences.  I have downloaded all the updates available and have tried many times.
    Using a Windows XP SP3 computer.
    Thank you, Marion

    Hi,
    The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
    Please open the link below which illustrates the same.
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en​...
    If the issue persists then, please perform the steps as shown below and check the copying function again.
    Steps to perform a reset.
    Press the Power button ( ) to turn off the product.
    NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.  
    Disconnect the power cord from the rear of the product.
    Disconnect the power cord from the electrical outlet.
    Wait 30 seconds.
    Reconnect the power cord to the electrical outlet.
    Reconnect the power cord to the rear of the product.
    Press the Power button ( ) to turn on the product.
    Connect the unit directly to a wall outlet.
    Check the copying function now.
    I hope this resolves the issue, if the error persists then please get back to us.

  • PRINTING: How to print more than one email at a time?

    Is it not possible to simply select 10 different emails and send them to the print queue?
    I've been searching for hours now and the closest thing I've found is an Automator action that allows users to condense several emails into one (and print from there). This doesn't work for me as I have several receipt emails that shouldn't be combined. Is my only option, seriously, to sit there, one by one, and open > print > close, open > print > close.
    There HAS to be a better way than that. Can anyone help?
    Thanks,
    David

    OK - try this: Do what advanced user said (⌘-select multiple messages) and print to PDF someplace convenient like your Desktop. Highlight/select all newly created PDF icons. Open all simultaneously with Preview (Right-click Open With if you have another default application for PDF, or just right-click Open if Preview is your default PDF application). This displays the multiple documents inside a single window, each accessible by clicking on the appropriate document icon in the sidebar, at least, apparently, that is the default behavior on mine unless you have changed that behavior in Preview Preferences General.
    Simultaneously select/drag all the second to last document icons displayed in the document sidebar and drag&drop them on top of the first document icon. "Save as" to whatever. Quit Preview. You now have a multi-page PDF of all those individual PDFs that you started out with.

  • Print more than one page at a time

    I need help configuring my printer to permanently print 2 pages every time.

    on my other hp scanner and copier i could set the no of copies i wanted. on this one i cannnot find that option.
    thanks for the reply

  • Is it possible to print more than one picture at a time on a single page and if so, how?

    is it possible to print more than one picture at a time on a single page and if so, how?

    Hi Rowegarth.
    HP Photo Creations offers several ways to print multiple photos on a page. Here's a link to some preset grids. If you don't have HP Photo Creations already, you'll be prompted to download the software. (It's a free download.)
    You could also start with a "Design Your Own" collage print with a white theme.
    This video shows some ways to print multiple photos in HP Photo Creations to make them easier to cut out:
    www.youtube.com/embed/VRoGjhXPm4I?rel=0
    The beginning shows an older version of the software, but the second half (at 1:17) explains the grid settings. 
    Hope this helps,
    RocketLife
    RocketLife, developer of HP Photo Creations
    » Visit the HP Photo Creations Facebook page — news, tips, and inspiration
    » See the HP Photo Creations video tours — cool tips in under 2 minutes
    » Contact Customer Support — get answers from the experts

  • SMARTFORM: how to create 3 copy (each copy can print more than one page)

    SMARTFORM: how to create 3 copy (each copy can print more than one page)
    Hello everyone.
    my user want to have form that print 3 copy.
    such as 1 copy description = master,  2 copy description = copy 1 ,3 copy description = copy 2.
    so i create 3 page . I copy from page 1.
    and in each page there is main window which can have data more than 1 page.(such as have a lot of sale data ,it's take 2 page for show output .so it's take 2 page in each copy)
    please help me.
    how to set page and window in each page for print 3 copy and each page can have main window that print more than 1 page

    Hello Vinit.
    thank you very much for your help.
    could you help me more please.
    in below code
      DO NAST_ANZAL TIMES.
    l_counter = l_counter + 1.  " << pass this to FM and use for the TEXT to print
    CALL FUNCTION LF_FM_NAME
               EXPORTING
                         COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
    enddo.
    Now i out of office .so i cannot test.
    where do i set NAST_ANZAL for 3 ?
    can i input ?
    NAST_ANZAL = 3.
      DO NAST_ANZAL TIMES.
    l_counter = l_counter + 1.  " << pass this to FM and use for the TEXT to print
    CALL FUNCTION LF_FM_NAME
               EXPORTING
                         COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
    enddo.
    Edited by: dittaporn nanasilp on Mar 12, 2011 3:33 PM

  • Problem with printing more than one page (ghostscript broken?)

    Hello,
    since one of the last package updates I have problems with printing more than one page. The print problems occurs as well with pdf files as well with printing websites. I use an actual KDE system with commercial turboprint printer driver. The first page always prints fine, but all consecutive pages are corrupted.  As from a similar problem some months ago, I assume a broken ghostscript package. I tried to downgrade ghostscript to check that, but I get depency problems:
    root@arch32 dieter]# ls -l /var/cache/pacman/pkg/ghostscript-*
    -rw-r--r-- 1 root root  9906288 21. Mär 2010  /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
    -rw-r--r-- 1 root root 11402624  8. Okt 22:44 /var/cache/pacman/pkg/ghostscript-9.00-1-i686.pkg.tar.xz
    [root@arch32 dieter]# pacman -U /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
    Löse Abhängigkeiten auf...
    Suche nach Zwischen-Konflikten...
    Fehler: Konnte den Vorgang (Kann Abhängigkeiten nicht erfüllen) nicht vorbereiten
    :: libspectre: benötigt ghostscript>=9.00
    [root@arch32 dieter]#
    Anyone else having printing problems or a solution for my problem?
    Thanks, Dieter

    This may not be related but I had a problem printing a pdf today whereby the second page got corrupted. The same pdf had printed fine several months ago. I realised that (long story) for some reason I had switched drivers (HP printer) from hpijs to hpcups. I installed the printer again as a "new" printer using the hpijs driver and it printed properly this time.
    So it may be that the bug causes issues with some drivers. You could try an alternative driver for the printer as temporary workaround?

  • How to make more than one partition on Airport Time Capsule?

    how to make more than one partition on Airport Time Capsule?

    Only for the very brave......
    Open up the Time Capsule (voids the warranty)
    Pull the hard drive
    Place the hard drive in a separate enclosure
    Connect the enclosure directly to your Mac
    Use Disk Utility to partition the hard drive
    Reinstall the hard drive back in the Time Capsule
    For the rest of us.....
    The next best thing might be to set up one or more disk images on the Time Capsule, which will allow you reserve a given amount of space for each disk image.
    Open up Macintosh HD > Applications > Utilities > Disk Utility
    Click on the New Image tab
    Navigate to the Time Capsule
    Set up the disk image by naming it and specifying how much space you want to reserve

  • Is it possible to add more than one page at a time in pages - word processing?

    Is it possible to add more than one page at a time in pages - word processing?

    I haven't been able to find a way to add more than one page at a time.  I think you'll have to add them one at a time. 

  • My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

    My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.  This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail!  Any help?

    The cyan portion of the printhead may be clogged.  I would suggest running the diagnostics shown here.  If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Does anyone know how to print more than one picture on a page?

    I am having trouble finding a way to print more than one image per page with Aperature? Do they have other options like photoshop?
    Jim

    What I have done is use the book pages with my own layout.
    The problem with this is you are hit and miss to get exact final dimensions for each of the images. You need to print and then measure. I used my laser printer to not waste ink and paper, then the Lineups are ok. Once you have your template sizes correct, then you are fine and it is repreducable for any picture package combo you want.
    I have fussed with it so I can get 2 5x7s on a page with the correct dimensions.
    The photobox property popup has aspect ratio, alignment and should also have a DIMENSION option. This would be super as the rest of the book page layout is pretty flexible.
    Good luck.

  • PhotoSmart 2710 Printer Feeder cannot handle more than one page at a time

     1. Product Name and Number -> Photosmart 2710 Wireless All in One Printer
     2. Operating System installed (if applicable)  -> OSX 10.6 / 10.7
     3. Error message (if any)  -> None
     4. Any changes made to your system before the issue occurred -> None
    My printer works fine except that the paper feeder has difficulty feeding more than one sheet at a time.  When I put a stack of more than one sheet of paper in the feeder tray, the printer might successfully print one or two pages, but then pages will overlap (top of printed page is on one sheet, bottom on another or multiple sheets will be grabbed at the same time so only the first sheet gets printed and the others are blank.
    I do mostly standard office paper printing so no real experience with heavier pages.  I get my paper from Office Supply stores, like Staples, and brand does not seem to make a difference.  Have had same experience with Store Brands, National paper company brands and have even used HP branded paper with same results.
    I have no problems when I manually feed individual sheets to the printer  So I have essentially a single sheet printer.  Any help appreciated.
    Thank You

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • How to use more than one page to design a form-like report???

    Hi
    I am designing a form-like report. and widening the repeating frame to contain all the page or the window like this page:
    Image: !http://up1.m5zn.com/photo/2008/12/21/07/e728mos12.jpg/jpg!
    Now there is no space at the window to complete designing the report!
    How to make the repeating frame to contain more than one page or one window to complete designing the report?

    change Vertical Panels per Page to 2 (or more as needed) for the Main Section of Layout Model.

  • How do you fax more than one page at a time?

    How do you fax more than one page using the phone?

    Hello @spirittoo, 
    I am not quite sure what you mean.
    Are you using a third party app to send faxes from a cell phone?
    In case you are having an actual fax issue, I have included the following links.
    Send a Fax from the Scanner Glass or the Automatic Document Feeder
    Fax Sending Fails Intermittently or Fails for Only One Recipient
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Maybe you are looking for