How to print multiple values seperated by comma in a table

Dear All,
   I have one requirement where am not able to acheive it in BO XI R4 . I tried as per this link http://scn.sap.com/thread/3245018 and it did not get the expected result.
Assuming that i hagve the data as shown in below table
Name
City
A
YYY
A
XXX
A
PPP
B
QQQ
B
WWW
C
XXX
C
RRR
C
ZZZ
D
GGG
I would like to print the above data in the below format
Name
City
A
YYY,XXX,PPP
B
QQQ,WWW
C
XXX,RRR,ZZZ
D
GGG
Kindly help me on this as how to achieve this in WebI R4
Thanks in advance,
Arjun

Hi Arjun,
This link will help you.
How do I concatenate a single field from multiple rows in BOXI 3.1 WebI?
Regards
Mustafa

Similar Messages

  • How to select multiple values from the Parameters in the concurrent program

    How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?

    I think there's no way to do that using standard feature.
    Some workaround I use :
    1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
    Selection1 : <choose first selection>
    Selection2: <choose 2nd selection>
    ..etc.
    If you don't use it then leave it empty.
    2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc.

  • How to print multiple footers for each page in RTF template xml report.

    Hi,
    How to print multiple footers for each page in RTF template xml report.
    i am able to print ( two sets ) ...
    up to last page ( one template ) and for last page ( another template).
    i want to change the footer information based on the group value printed in the report ( it might be 5 to 6) In every report run.. can you please check and let me know do we have any feasibility to achieve this.
    Thanks in advance.
    Regards,
    KAP.

    You can remove all other logic, like last page only contents (start@last-page:body), etc and section breaks if any you have inserted manually.
    Just have for-each@section logic.
    It would be difficult for me to guess what you have done without looking at your RTF or describing here.

  • How To Print Field Value in TOP-OF-PAGE During Line Selection.

    How To Print Field Value in TOP-OF-PAGE During Line Selection when double click on field.

    (If my memory serves me well (not used for long time ago)
    Assign values to system fields sy-tvar0 - sy-tvar9, they will replace the placeholders "&0" through "&9" in the list headers and column headers.
    TOP-OF-PAGE DURING LINE-SELECTION.
         WRITE: / 'Interactive Report &3'.
      WRITE record-vbeln TO sy-tvar3.
    Regards,
    Raymond

  • How to use multiple values in an IF condition in RTF

    Hi,
    I have a scenario as mentioned below.
    IF column value in ('A','B')
    display C;
    end if
    IF column value not in ('A','B')
    display D;
    end if
    My query is how to provide multiple values in an IF condition.?
    Thanks,
    Anand

    But suppose "x.jar" needs a library from "y.jar". How do you put another JAR on the classpath of an applet in a Web page?
    <applet code="z.class" archive="a.jar,b.jar,c.jar">

  • How to select multiple values from a listbox

    Hi,
    I have a list box on my UI which is not allowing me to select multiple values
    I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving error
    When i drag & drop the component i am unable to drop it as a multi select list box that option is not coming.
    I am working on Jdev 11.1.1.3 and I am using ADF/BC components
    How to select multiple values from a listbox ?
    Thanks,

    Hi,
    I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving errorank
    And what is the error ?
    Frank

  • How to pass multiple values from workbook to planning function ?

    Hi,
    I have created Planning function in Modeler and it has one parameter(Variable represents = Multiple single values).
    When executing the planning function by create planning seq. in the web template : I see value of variable store data like ...
        A.) input one value -> V1
        B.) input three values -> V1;V2;V3
    This function execute completely in web.
    However, I want to use the planning function in workbook(Excel).
    The value of variable can't input V1;V2;V3... I don't know how to pass multiple values from workbook to parameter(Multiple single values type) in planning function ?
    thank you.

    Hi,
    Please see the attached how to document (page no 16).
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be">how to</a>
    Hope this was helpful
    thanks

  • How to select multiple values from the parameters in BI Publisher report

    How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

    Hi kishore,
    I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
    Iam able to get the results when I am selecting one value..
    and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
    ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
    1.Single selection.
    2.Multiple selection.
    3.'ALL' Values.
    4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
    Ex:
    Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
    Expected Output on the report:ACCOUNT,HR,SALES
    reply to this would be much appreciated....
    thanks,
    manoj

  • How to print multiple copies on one page ?

    How to print multiple copies of one document on one page ?
    in coreldraw I used to make the document -for example a business card 5x9 - and when sending to print it automatically placed the number of cards that would fit in my A4 sheet.
    how do I make the same operation in Indesign.
    thanks

    Hi, Peter S.
    >I can see that as a shortcut to printing a page of different cards for multiple people, but to do a simple n-up of a single card it seems overly complex to me. What am I missing?
    * It's just an alternative to copy/paste and step/repeat.
    * For a one-time only use, perhaps it's a little more complex than necessary. But for any future needs, only the content of the data file needs to be changed, either by editing, or by pointing to a new data file. If different cards for multiple people becomes necessary, it's ready to go.
    Regards,
    Peter Gold
    KnowHow ProServices

  • How to print Jtable values in one A4 size paper

    Hi,
    i am having JPanel , this panel have Jtbale, Jtextfield, Jlable, i search the code for Printing Jpanel, its work fine and print whole JPanel including, jtable, textbox, everything.
    my Jtable have Scroll bar to see all the values in the table,my problem is when i was print the JPanel the Jtable print only the display values in Jtable, cannot print all the values from Jtable,(eg. Jtable have 50 rows, screen display 20 rows only, move the scrollbar to see remaining,) .
    i want to print 50 rows how to print the values anyone can help me
    thanks in advance.

    Duplicate post. Mods please do your duty.

  • How to print the value of a field of  type FLTP

    hi experts,
    pls tell me how to print the value of a field of  type FLTP. i.e in decimal format not in exponential format.
    thankyou.
    krishna

    Hi ,
    I dont think in Floating point u can able to go for the decimal point display as it is for the minimum precission display..
    Define the variable as the 'packed' type and then u can able to define the decimal point...
    Cheers,
    SImha.

  • How to implement multiple Value Helps within the same Application ??

    Dear Experts,
    I want to implement multiple value helps in the same view.For that I have declared exporting parameters of type 'wdy_key_value_table.' within the component controller for each of the value helps.While I do activate and test the application I get the following error :
    The following error text was processed in the system HE6 : A row with the same key already exists.
    The error occurred on the application server hsdnt24s11_HE6_00 and in the work process 4 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
    Method: IF_PO_VIEW1~VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
    Method: WDDOINIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_DO_INIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
    Method: DO_INIT of program CL_WDR_DELEGATING_VIEW========CP
    Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
    Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
    Method: INIT of program CL_WDR_CONTROLLER=============CP
    Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
    Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
    I dont know how to implement multiple value helps.Need your help on this.
    Regards,
    Mamai.

    Hi
    Hint is : A row with the same key already exists it means , It is assigning the same value/Key to row and you are calling it at WDDOINIT  so it giving error at the time of initialization .
    Better way to do the coding at some event in view OR if not possible than just execute the first value help in wddoinit later clear all the value before gettig the other Value help. Code it at WdDoModify View to get its run time behaviour.
    BR
    Satish Kumar

  • How to assigne multiple value in key of read table

    Hi gurus,
    I want read table xxxx with key field1 = ' xxx' or field1 = 'yyy'.
    how to assign multiple value as key for the same field while reading internal table.
    Regards
    sagar

    Hi ,
    You can loop the internal table like
    loop at  <table xxxx> where field1 = ' xxx' or field1 = 'yyy'
    or you can write two read statements to read the internal table in wrk area.
    read table   <table xxxx> with key field1 = ' xxx'.
    if sy-subrc <>0
    read table   <table xxxx> with key field1 = 'yyy'.
    if sy-subrc = 0
    endif.
    else.
    do your data processing.
    endif.
    Thans.

  • Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

    Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

    is this a windows in bootcamp question ?

  • After selecting multiple values, immediately it will placed in Table contro

    hello experts,
    I m using select-option for multiple value selection.
    I want:-after selecting multiple values, immediately it will placed in
    Table control columns which is on same screen of select-option and that columns are grayed out.
    I'm using this table control for input purpose.
    I tried multiple value selection for input in table control but it is not possible.
    Please Help.

    There should be some user action to trigger the filling in of the table control with values from the select options.
    Typically it is a click of Enter from the User s side. This would automatically trigger the PAI of the Module Pool program. So i feel the FM that is mentioned in the above post is not required to read the values because in the PAI , the value from the Select Options would have already flown from the Screen to the Program.
    It is important that you use Subscreen for Select options and write your code in the PAI between loop endloop.
    LOOP at Itab.
    MODULE  fill_itab.
    Endloop.
    I hope everyone agrees with me on this .
    Regards,
    Arun

Maybe you are looking for