How to print on shared printer connected by an ethernat cable to a network through an AirPort Extreme wireless system

How do you print on a shared printer connected by an ethernet cable to a network on a AirPort Extreme unit?

I don't believe there's a way to print to it from an iPad ... unless the printer itself has wireless capability.
This should help:
AirPrint basics

Similar Messages

HT5566 How do I see the devices attached to my network through my airport extreme router?

I can't find a way to see the addresses of all the devices connected to my Airport Extreme base station over ethernet. I can see the wifi clients attached to the Extreme and to each Airport Express in the network. But I don't see any of the 15+ other ethernet-connected devices. There does not seem to be any interface that get me to this list of devices or allows me to inspect or monitor their settings. What am I missing? How can you manage a network with this router without this capability?

can't find a way to see the addresses of all the devices connected to my Airport Extreme base station over ethernet.
There is no way to do this in AirPort Utility 6.x versions since Apple removed the DHCP logs.
Let Apple know if you like the "upgraded" AirPort Utility 6.x versions.
Apple - AirPort Extreme - Feedback

HT4356 Can I use a 'pc' network printer connected via ethernet to the home wifi network ?

Can I use a 'pc' network printer connected via ethernet to the home wifi network ?
or must the printer I want to use also have a wifi connection ?
I have a home network using ethernet connected devices to a router, also attached to th erouter is a WiFi unit. We are using the WiFi unit to connect to the network and hence to the big wide WWW. We now want to print from our IPads pereferable to our netowk connected HP Officejet Pro 8500 A909a series. (not the wireless model).
I was using the HP ePrint app to print from the Ipad, but I do not fully understand how this works. It seems that you must use the app to do the printing which is fine for basic email and photos, but I can not access the drawing package I have, and want to print from it. Please what is it that I do not understand.

You must use an airprint printer directly connected to wifi through it's own wifi card.
See here for info:
http://support.apple.com/kb/ht4356

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to connect a Sony Bravia TV to the internet through your Airport network

Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

I have now had a detailed reply from Sony Europe and the way to do this is to:
1.       Press Home on the TV Setup
2.       Use the right and left arrow to select Setting.
3.       Use the up and down to select Network, press Enter.
4.       Select Network Setup.
5.       Select Wireless setup.
6.       Select Scan
7.       Select your network
8.       A new screen will appear asking for entering the security key.
9.       Enter your WPA2 key.
10.   Select Enter.
11.   It will take you back to the same screen asking for entering the
security key.
12.   Press the right arrow.
13.   Select Auto.
14.   Press the right arrow.
15.   Select Save and connect.
These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

How can I create a guest network on an airport extreme that connects wirelessly with a Timecapsule

I have a Timecapsule in one place of our house, that is connected to Internet. I need to extend the range of my network: 1. my private network needs to get to a remote location to make connection with speakers (Itunes). for this I need to first extend the range of my private network, because the speakers are too far away from the TC. 2. I need to set up a guest network, but at quite some distance from my TC, in an other part of the house, too far away from the TC (so a guest network on the TC won't do).
For this, upon advice from an apple store, I bought an airport extreme, which I have placed on a location where it can connect to the TC, to extend the private network. On the location of the speakers, I have an aiport express (connecting to the extreme), to play music from Itunes. The setup at this moment is: TC makes connection to internet, and broadcasts a private network. Extreme connects to this private network, and broadcasts it further to the Airport express, that captures it and plays the music. I would now like to create a guest network on the Airport Extreme, while this Extreme keeps on connecting to the private network of the TC and keeps on broadcasting it to the Express. Is this possible? How can I do this? Thanks for the help !

I would now like to create a guest network on the Airport Extreme, while this Extreme keeps on connecting to the private network of the TC and keeps on broadcasting it to the Express. Is this possible?
Unfortunately, the "main" router...your TC in this case....is the only device that can create a Guest Network, assuming that the TC is connected to a simple modem.
Unfortunately again, the Guest Network cannot be extended. Your only real option here is to create a Guest Network on the TC and hope that it will have sufficient coverage for your needs.

I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020 monochrome)

I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020 monochrome)

I had the exact same problem
It turns out I was using a 20 foot USB cable between the printer and the Airport Extreme and the signal had become to weak to work. Try using nothing more than a 6 foot cable or try a new cable

Can i connect a new airport extreme wirelessly to an existing airport extreme to extend range? if so, how?

My mother has an airport extreme hardwired to a modem for wireless connection in her home. she is trying to get a wireless connection in her shop, about 250 away and i was wondering if i can use another airport extreme wirelessly to connect to the wired extreme to extend the range

And, by clear line of sight Bob means nothing between the two but air space. Windows, walls, trees, bushes, etc. all act to attenuate the signal substantially, thus reducing the effective range.
If you are willing to spend lots of money you can purchase amplifiers that can extend the range. Check this out at QuickerTek.com.

Connecting 2 Airport Extremes wirelessly....can it be done?

Connecting 2 Airport Extremes wirelessly....can it be done?
I have 2 Airport Extremes. I'm only using 1 of them right now connected to a cable modem. It works well. I can get a wireless signal in most of the house and even outside a bit. However there are upstairs bedrooms on the other side of the house that I don't get a very strong signal on. No "big" deal really but here is what I thought.......
Can I set up my 2nd Airport Extreme to wirelessly receive the signal from the 1st (main) Airport Extreme and place the 2nd Airport Extreme close to the bedrooms with weak reception? I was thinking that the 2nd AirPort Extreme could just pickup and boost my original signal.
Is this possible? I can't find it mentioned in my Airport Manual.
If so, what is the term for this? That way I can search for information on how to configure all of this. If you have any other ideas on how this might able to work please let me know.
Thanks for your help

OK, you will need to make configuration changes to both of your Extremes.
For the main Extreme (the one connected to your modem now):
Open AirPort Utility, click Manual Setup
Click the Wireless tab under the icons
Look on the wireless setup page and make sure there is a check mark next to "Allow this network to be extended". This may be under the Options tab on the wireless page. If you have a dual band Extreme, you can only extend the main network, not the 'guest" network.
Update to save settings
For the remote Extreme, temporarily locate it near your computer so that you can configure it:
Open AirPort Utility, click Manual Setup
Click the Wireless tab
On the wireless setup page, change the Wireless Mode to "Extend a wireless network"
You will select the name of wireless network created by your main Extreme. Enter the password if needed.
Make sure there is a check mark next to "Allow wireless clients"
Update to save settings
That should do it.

How many AirPort Express stations can be supported by an AirPort Extreme wirelessly?

I got one AirPort Extreme in my home and would like to extend the wireless network by purchasing additional AirPort Express. Wanna know how many AirPort Express stations can be supported by an AirPort Extreme wirelessly?
Thanks.
Tony

Bob -- question for you which I can't answer as I don't have an airport extreme. The newer Extremes can create both G and N networks and can create the N network in the 5 mhz band. Can you increase the number of Express units you can connect wirelessly if you split the load between the 2.4 mhz G and 5 mhz N networks created by the Extreme. (recognizing that the 5 mhz band has less range than the 2.4 mhz band)
Not an issue for me as I only have three connected wirelessly, but I've always wondered about this. Of my three AX units one connects to a G network created by a Linksys WRT54GS and two connect to the N network created by the AX.
So instead of 3-4 AX units could it become 6-8?
Carlos

Acouple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since with Apple

A couple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since,with Apple & Apple store support & many hours of contact with them the problem keeps recurring

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

This Apple support document provides good general information on configuring different types of neworks using multiple AirPort routers.
http://support.apple.com/kb/HT4145
In particular, you would want to focus on the information regarding a "Roaming Network"

How do I use time machine to backup to an external hard drive plugged into my airport extreme

How do I use time machine to backup to an external hard drive plugged into my airport extreme? I used to be able to but now time machine will not recognize my hard drive to select as a backup when plugged into my airport extreme. I'm not sure what happened or changed. Any help is greatly appreciated. Thanks

First thing to do is go to the Pondini tips page, then follow the link to his full TM site for all the details.

Remote Desktop Connection won't connect to ip address through my airport extreme?

I can't seem to get my RDC to connect through my airport extreme. I know it must be a setting on my airport extreme, but can't figure it out.
When I hardwire the ethernet cable from the modem to the computer it connects fine, and when I set up a hot spot through my iphone, it also works fine every time as well.
I've made sure to add "Windows Remote Desktop" through the port setting in Network settings on the Airport. Can someone please help me??
Many thanks in advance...

Hello Jedid4n. Welcome to the Apple Discussions!
Do you have the AirPort Express Base Station (AX) configured as the remote base station in a WDS with the AirPort Extreme Base Station (AEBS) configured as the main base station? In order for the AX's Ethernet port to be enabled, the AX would have to be set up as either a remote or relay in a WDS.

HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

How to print on shared printer connected by an ethernat cable to a network through an AirPort Extreme wireless system

Similar Messages

Maybe you are looking for