How to print on the first side and the back side, like in a book?

HP PHOTOSMART 6510 B 211 a
Windows XP
Product N° CQ 761B
[serial number removed for privacy]

Hi AUQUE,
Here is a link to a document that will show you how to duplex (print on both sides of the paper ).
Along with the document is a video. Hope this helps.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Similar Messages

How to print on the back of photo paper so it will dry.

I need to print on the back of some photos I have. I am using an HP Officejet Pro 8500A using Windows 7. I have tried to print on these photos but the ink will not dry.
The paper I am using is 4x6 glossy everyday photo paper.
What should I change in the settings to get the ink to dry????
This question was solved.
View Solution.

Hi,
most of the Photo Paper will only allow you to print on a single side.
Unless the used Photo Paper is intended for double side printing you will not be able to print on the back of the paper.
There are no different settings for any of the sided, it only depand on the used media.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can't figure out how to print on the right side of a greeting card using a 5X7 when folded

I have a HP Officejet Pro 8500A. I am trying to print a greeting card, but cannot figure out how to print on the right side of the paper so that it's on the correct side when folded. The paper is 5X7 when folded, 10X7 laid flat.

shgilljx,
Welcome to the forums. I will try to explain this in simple terms, and you'll have to play with it. We'll use plain paper, cut to 10x7. You'll need a marker, 4-5 sheets of paper.
Lay paper flat, number top 1, bottom 2. Flip paper over right to left. number top 3, and bottom 4.Draw a line where the fold would be on each page.1) Put paper with number 3 side up in printer.
To create both templates using MW Office, do this. The requires 2 documents. One is graphic, one is text.
Text template: The text will be printed on number 2. That means your wording must be within the bottom half of the page.
Graphic template: The image must be rotated 180 degrees.The image must be within the top half of the page.
Print the text template. Insert side #3 into the printer. The text should print on side #2.
Print the graphic template: Insert side #1 into the printer. The graphic should print on side #3.
When folded, all should be correct, if I did it right.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

How to print header in first and last page only in SAPSCRIPT

Hi!
How to print header in first and last page only in SAPSCRIPT,
in between pages, I need to print all line items in MAIN window only .
Thanks in anticipation!
Aki.

Hi All,
Thanks for your early update...but my requirement here is
I have two pages (FIRST , NEXT ) First is having Header, Main and Footer
NEXT is having Main and Footer ..I am printing PO here..let us think that my PO is having 20lines items , let us assume that it takes five pages...
Now how application is printing is ..first set of data is printing in FIRST page and remainiang data distributed to 4 pages printing in NEXT page ..but what my requirement is , I need fifth page print on FIRST page, instead of NEXT page... Ultimately I need last set of data always print in FIRST ie out of 5 pages 1st print on FIRST 2nd 3rd 4th print on NEXT and 5th print again on FIRST .
hope you this will clear you.
Thanks!

How to: Print table on first page, use second page (back) for text only

Hi, I am looking for a clear document on how to use pagination and the Odd and Even pages.
We need to print a table over several pages, but only on Odd pages.
On the back of each page we need to print "Terms and Conditions". Is that possible? Can it be done without scripting
We are on ADOBE version 8.1
In the file properties, double sided is switched on, and version set to 8.1 and higher.
I created two Master pages, a FrontPage with ContentArea1and a BackPage with ContentArea2.
FrontPage is used for uneven pages, BackPage is used for the even pages. The masterpages are printed correctly (alternating properly).
Two pages were created for the content area's:
ITEMS: contains item data (table with header and footer). Place is "On Odd Page". After "Goto page BackPage". And if the table needs to be paginated it goes to BackPage with overflow leader "Conditions".
CONDITIONS: contains a textfield (Terms and Conditions). Place is "On Even Page". After "Goto page FrontPage". No overflow.
What should happen is that on the front pages the item table is printed. If there are too many lines it should overflow to page number 3 then 5 etc. All the even pages should display the text.
What actually happens is that the item table also gets printed in the content area for the Condition text...
Also the "Conditions" are not printed on the last back page. But only once before it...
Cheers,
Edwin.

Fixed it... After a lot of creating, deleting, playing around with pagination and the inevitable cursing...
I have created 5 pages:
1. FirstPage
     - Odd/Even: Odd (Front) Pages
     - Placement: First page (In page set)
2. FrontPage (For Odd pages)
     - Odd/Even: Odd/Front Pages
     - Placement: Rest of Pages
3. BackPage (For Even pages)
     - Odd/Even: Even (Back) Pages
     - Placement: Rest of Pages
4. LastPage
     - Odd/Even: No Odd/Even Restrictions
     - Placement: Last page (In page set)
5. DummyPage
     - Odd/Even: Blank pages
The 'Terms and conditions' are located on the BackPage and LastPage (as a text).
The table that is printed is (of course) located on a normal page (flowed subform).
Pagination tab: Placement = Following previous, and After = "Continue filling parent". No overflow... Basically, it's all default.
The table lines will now start on the first page and if there are more lines than can be printed on this page, it will continue in the next content area. That will be on the FrontPage.
The trick is that each master page must have a content area (mandatory). Except for Blank pages, but these cannot be used... Blank pages would only be used once, after the first page.
What I discovered is that you can drag a content area away from the Master page and attach it to a different master page.
Logically, if there is no content area on a page, then data cannot be printed there. So, I created a Dummypage. On this page I dumped the content areas from the LastPage and the BackPage. As a result, content cannot be printed anymore on the back of pages. Only the standard text (a text field) is printed there. When the data from the table is overflowing, it will automatically overflow from the FirstPage to the next content area. Which is located on the FrontPages only.
The DummyPage is NOT used anywhere.
The result is that the records can only be printed on the content areas that exist on the First and Front pages. The back pages are now skipped.
Duplex printing is now working correctly, and the text is printed on the back of all the pages.
Cheers,
Edwin.

How u will set the external parameters like packet size and number

How u will set the external parameters like packet size and number of parallel process.

Dear Karthik,
ALE:
Use Transaction UPSC02 - ALE Distribution Unit: Packet Types.
Performance Optimization for ODS Objects:
To ensure a good ODS object loading performance, take the following into account:
 1. Creating SIDs
The creation of SIDs takes a long time and can be avoided in the following cases by:
 Not setting the indicator for BEx Reporting if you are using the ODS object only as a data store. If you do set this indicator, SIDs are created for all new characteristic values.
 If you use line items (for example, document number or time stamp) as characteristics in the ODS object, in the characteristic maintenance, indicate these as Attribute Only.
SIDs are created in parallel if parallel activation is switched on (see last point). They are then created with the same number of parallel processes as created for the activation.
However, if you specify a server group or a special server in customizing, these specifications are not only valid for the activation, but also for the SID creation. The creation of SIDs runs on the application server on which the batch job also runs.
 2. DB partitioning in active data tables (technical A table)
By partitioning by database level, you can delete data from the ODS object much more quickly. As a partitioning criterion, choose the characteristic by which you want to delete. For more information on partitioning database tables, see the database documentation (DBMS-CD). Partitioning is supported by the following databases: Oracle, DB2/390, Informix.
 3. Indexing
Use selection criteria for queries for ODS objects. If the key fields are specified, the existing primary index is used. The more frequently accessed characteristic should appear on the left-hand side.
If you did not specify the key fields completely in the selection criteria (visible in the SQL trace), you improve the run time of the query by creating additional indexes. You can create these secondary indexes in the ODS object maintenance.
 4. Activation of data in an ODS object
To improve system performance when activating data in the ODS object, you can make the following entries in Customizing under SAP Customizing Implementation Guide -> SAP NetWeaver -> Business Information Warehouse -> General BW Settings -> ODS Object Settings:
 the maximum number of parallel processes when activating data in the ODS object as when moving SIDs
 the minimum number of data records for each data package when activating data in the ODS object, meaning you define the size of the data packages that are activated
 the maximum wait time in seconds when activating data in the ODS object. This is the time when the main process (batch process) waits for the dialog process that is split before it classifies it as having failed.
 the server group that needs to be used when activating the data in ODS objects in parallel You have to create the server groups beforehand using the following path: Tools -> Administration -> Network -> RFC Destination, RFC -> RFC Groups. If you do not specify anything here, then the activation runs on the server on which the batch process was started for activation. If a server from the server group is not active, then the activation is cancelled.
 5. Loading unique data records
If you only load unique data records (meaning data records with nonrecurring key combinations) into the ODS object, then the loading performance is improved when you set the indicator Unique Data Records in the ODS object maintenance.
The records are then updated more quickly because the system no longer needs to check whether the record already exists. You do have to be sure that there duplicate records are definitely not being loaded, because this will lead to termination.
Regards,
Naveen.

I work on flash light pro and it make a print on the back of the screen of my iphone ??

i work on flash light pro on my iphone and after i close the application ,i found that the program make a print at the back of my iphhone screen ,, it appears mainly at the blank screen , and i have pics for the application and also for the print that appear on the screen , plz reply on me and tell me how to send you the pics and i want a refund on this fault done by this application..

i work on flash light pro on my iphone and after i close the application ,i found that the program make a print at the back of my iphhone screen ,, it appears mainly at the blank screen , and i have pics for the application and also for the print that appear on the screen , plz reply on me and tell me how to send you the pics and i want a refund on this fault done by this application..

The back button no longer works. I have disabled all add-ons, rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

I just downloaded the new iOS 5.0 and did all of the backup prompted steps beforehand, but I can't figure out how to get all of my apps and music back on my iPhone. Where did they go and how can I put them back on my iPhone?

I just downloaded the new iOS 5.0 and did all of the backup prompted steps beforehand, but I can't figure out how to get all of my apps and music back on my iPhone. Where did they go and how can I put them back on my iPhone?

Hi, Abril_Perez17.
This may be related to a new feature embedded in iOS7 that shows all purchased music by default. Go to Settings > Music, then turn off Show All Music. See if the issue ceases once the feature has been disabled. This information is located on page 63 of the user guide below.
iPhone User Guide
Regards,
Jason H.

How do I turn off wifi syncing and go back to the cable sync in iTunes?

How do I turn off wifi syncing and go back to the cable sync in iTunes?

Select the device in iTunes and uncheck WiFi syncing on the Summary pane of it's sync settings.

How do I uninstall iTunes 12.0 and revert back to version 11.4, version 12.0 takes away the control of lists etc and I want it back

how do I uninstall iTunes 12.0 and revert back to version 11.4, version 12.0 takes away the control of lists etc and I want it back

Hi,
Can you please expand on your issue? As far as I can see all the previous functions of 11 are in 12 albeit shown differently. Using get info to edit date is still possible, again it looks and feels different.
JIm

How to print out the position of 2 dimension arrays?

there are 2 dimension arrays, how can print out the position of value than 4?
for example
0 2 3 2 2 2
0 1 1 2 5 3
1 2 3 3 2 1
print out:
The pos is ( 5,2).

Hello
If I understand your question correctly, you are trying to print out the indexes where the value in your matrix is greater than 4
If this is the case, then what you need to use is nested for loops e.g.
for (int i = 0; i< array[0].length; i++)
for (int j = 0; j< array[].length; j++)
int value = array[i][j];
if (value > 4)
System.out.println("The pos is (" + i + "," + j + ")" );
Regarding the syntax I have used to get the size of the array, I am not sure if this is correct, but you should have an idea of what I am doing.
Sajid

BIP - not to print on the back of the page base on certain condition?

Hi,
I have a BIP rtf word template to print job class title report. The report prints on front and back of a page if it is under the same job class title, which is fine. But when it is a different job class title (fk_job_title), I want to print on the front of a new page not the back of the previous page. Is there a way I can control the different job class title to print on front of a new page? This is how my template looks. Thank you so much in advance for all your help.
CLASS TITLE: F fk_job_title PAY GRADE: p_grade
JOB CODE: job_code SALARY RANGE: r1 - r2
LOCATION OF WORK
work_location
GENERAL DESCRIPTION
general_description
ESSENTIAL WORK TASKS
essential_work_task
KNOWLEDGE, SKILLS, AND ABILITIES
knowledge_skill_ability
MINIMUM REQUIREMENTS
EDUCATIONAL AND EXPERIENCE: education_experience
SUBSTITUTIONS: substitution
CERTIFICATIONS/LICENSES: certification_license
OTHER JOB ASPECTS: other_job_aspect
NOTES: special_note E
PB
Thank you,
MT

Hi Vetsrini,
Thank you so much for your quick respond.
I do have the PB - <?split-by-page-break:?> on my template in the PB (NOTES: special_note E (last column on the row)
PB)
The problem that I am having with is when my report (under the same class title) print on front (of page # 1), continue on back of page 1(which is page # 2), and continue on front of page 3.
If my class title change to a different class title, this print on the back of page 3 (which is page # 4), but I want it to start a new page (5). I don't want this to print on the back of page 3. If the user needs to pull certain job class specification, then all the printed pages should only have information for that particular job class. I hope I am not confusing you.
This is the lay out of my template.
CLASS TITLE: F fk_job_title PAY GRADE: p_grade
JOB CODE: job_code SALARY RANGE: r1 - r2
LOCATION OF WORK: work_location
NOTES: special_note E (last column on the row)
PB
Thank you,
MT

Prints with caption/description printed on the back

What I want to do is order prints that have comments printed on the back.
Is there any way to do this within iPhoto and using the internal iPhoto print ordering? Maybe using Picasa 3?
If you have to go elsewhere, e.g. upload to Shutterfly, is there a way to upload the comments along with it? In other words, if I fill out the "description" within iPhoto, that info will upload and print to the back through the online service.
The only way I know how to do this is upload to Shutterfly and add the comments in their online system, but I'd rather be able to do it in iPhoto or Picasa.
Thanks so much, hope this was clear enough.

What I want to do is order prints that have comments printed on the back.
There is no way to do this with iPhoto.
As for Picasa and other non-Apple services you'll need to check with their support services.
Regards
TD

How do you take the back off to insert sim card, how do you take the back off to insert sim card

how do i take the back of the cover off to insert sim card?

With an iPhone you don't need to take the back cover off (attempting to do so may damage the device). Instead look around the edges of the iPhone for the SIM tray. On an iPhone 4 the tray is located on the right hand side of the device, and on all other models it is on the top edge. Simply insert the end of a paperclip into the hole on the SIM tray and push gently.

Cancelled print but will not cancel and comes back on to print same job

cancelled print but will not cancel and comes back on to print same job on on hp deskjet all in one

Hi,
From the Control Panel, open Administrative Tools and select Sevices. Browse down to the print spooler service, right click it and select Properties then click on the Stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the job has been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to print on the first side and the back side, like in a book?

Similar Messages

Maybe you are looking for