How to print one sheet from a Numbers spreadsheet on an iPad?

I know this has been asked before and there are some work arounds...
On my iPad, I have a spreadsheet (it would be called a Workbook in Excel) comprised of a template that I duplicate and use as a data entry sheet for each individual component that I test in my shop. The spreadsheet is therefore comprised of a template and ten separate sheets, one for each component tested. I want to be able to email only sheet #6 to a client from my iPad.
Is there an efficient way to do this without coming back to my Mac and using the Print > Save as .pdf fucntionality available on the Mac

Generally, you are more likely to get an answer if you post in the iWork for iOS forum at
https://discussions.apple.com/community/app_store/iwork_for_ios
 Cheers, Tom

Similar Messages

Numbers for ipad - sent one sheet from a table

hi, i like to sent one sheet from my table via email/webdav. is this possible ?

suedkreislaeufer wrote:
hi, i like to sent one sheet from my table via email/webdav. is this possible ?
Hi, and welcome to Apple Discussions and the Numbers '09 forum.
If you're asking about sending an image of a single sheet from Numbers '09 (a Mac application), yes, it's possible. Show the sheet, press command-P to open the Print dialogue, then click PDF and choose Email PDF. The Mac will open a new email message with the pdf image of your sheet attached in your default email client, ready to be addressed and sent.
If you're asking about sending something from Numbers for the iPad (an iOS application), your question will be better served by someone familiar with that application. Numbers for the iPad has its own forum in the iPad section of Discussions. The link will take you directly to that forum.
Regards,
Barry

I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer

I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer. Any ideas?

Hi Cynthia,
Are you planning to have this table do any of the calculation, or is is to be used as the electronic equivalent of a sheet of paper with a grid printed on it—a place to record the data.
For your seven column table:
Are you using one or more rows at the top of the table to label the data below? If so, you might want this row (or these rows) to be set as Header Rows.
Are you using the leftmost column to label the rows? If so, you may want this column to be a Header column.
The default table supplied on the "Blank" templates contains one header row and one header column. If you need more (or fewer) Header rows or columns, select the table, then go Table (menu) > Header Rows > (choose the number you need). Repeat to set the number of Header Columns.
To make a seven column table from the table supplied by default, click on any cell in column H (The eighth column), and drag right to add more cells to the selection, until you get to the last column of the table. With these cells selected, Go Table > Delete Columns.
To make the remaining seven columns fit across a single page:
Go View > Show Print View to show the table as it would appear when printed to paper.
Select the table by clicking its icon in the Sheets List to the left (easy method), OR by carefully clicking on the outside boundary of the table itself (fiddley method).
With the table selected, you will see square white handles at each corner and at the middle of each side (including the top and bottom).
With the mouse, grab the handle in the middle of the right side of the table and drag right (or left) until the table just fits onto the width of the defined page.
With the table still selected, set the thickness and colour of the cell boundaries using the Gaphics Inspector (as described by Jerry), or using the Stroke, Thickness and Color Well controls in the Format bar above the working portion of the Window.
Regards,
Barry

How to print a specific cell in numbers

how to print a specific cell in numbers?

Copy the cell (contents), Paste onto a page of a separate document, or onto a separate sheet of your Numbers document, Print.
Or insert a single cell table onto your Numbers document, type an = sign in the cell then click on the cell you want to print. Drag the new table to a second sheet, set up your page there, and print.
See the Numbers '09 User Guide for other useful tools and techniques. Download the guide via the Help menu in Nuimbers.
Regards,
Barry

How to print double sided from my Mac to my Canon MG6350

I have looked up everywhere on the internet and youtube of how to print double sided from my Mac Book Pro. I am using OSX 10.8.5.
All of the dicussions I have looked up before have told me to go to System Preferences>Print & Scan>Options & Supplies> Driver and then tick the little box that comes up and it will allow you to print double sided. I have tried doing this but THERE IS NO DRIVER TAB!!!
I was just wondering if there was a solution to this as I can print double sided from my other appliences, like the PC and iPad, it is just my Mac Book Pro that doesn't work.
It has become a big problem for me as I'm studying at college and I need to print things double sided quite regularly. I really need this to work.

The print dialog has several drop-down menus, one of which initially shows the name of the application you're printing from. If the printer supports duplex, you can choose
Duplex Printing & Margin
from that menu. You should then see a checkbox marked
Automatic Duplex Printing

How to print in colour from a MAC

Hi,
I am having trouble figuring out how to print in colour from my computer. It is only printing in black and white despite the ink being full and copying in color. Their is obviously a setting I can't fiqure out.
Thanks

Hi @kerrianne
It is possible preset was created at one time and now the printer driver is set to print in grayscale. Let's reset the printing system and add the printer again. Please use the instructions below if you are unsure how to perform these steps;
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
When you add the printer, please ensure you are using the HP driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
I look forward to hearing from you
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How can print a report from form 6i, when I press a button?

hi Friends,
How can print a report from form 6i, when I press a button?
When i press a button from Form 6i, the report should print through printer.
I have done it by using report parameter DESTYPE Printer but problem is that when I press a button printer dialogue box appear and then I give command Print to printer, I don’t want to show Printer dialogue box.
I want when I press a button form Forms 6i , printer will print my report directly.
Please send me the solution of this problem.
Best regards,
Shahzad

Hi
If You are using Client server application then to passing to Add all Print Parameter in the Host Command.
Means Print command in unix to Host(lp.............) and Other Parameter to file name of the report to print.
If You not Use Client Server Application the Also Passing a Host Command in Button-Pressed Event and Run.

How to refer one view from another view?

Hi,
I have 2 views in my Adobe Flash Builder mobile app. I need to refer the first view in my second view.
How to refer one view from another view? Or how to create a reference to a view wherever needed?

I don't need any data from my first view. In a certain flow, I need to make my first view to be invisible.
for eg., My First view is in portrait mode. I change the device to Landscape. In the landscape mode, I want to show a completely different view (second view).
In this case, what happens is, I see my first view in Landscape mode for a second. Then the second view appears. When I change to Landscape mode, only the second view should be seen. I need to make my first view to be completely invisible in the OnOrientationChanging event of
StageOrientationEvent
As stage object and StageOrientationEvent works at application level, I need to know how to refer my first view object in the application level.
private function onOrientationChanging(soe:StageOrientationEvent):void
MyFirstView.Visible = False; ====> don't know how to refer MyFirstView here
Is my question clear now?

Power View can only print one sheet at a time with Power BI Mobile Apps

I have PowerView for Excel 2013 on Power BI Preview. I have 2 reports sheet and 2 hidden data sheets on Excel.
I'm getting error on Mobile Application in Windows 8 RT tablet.
I should see 4 reports in preview page, but I see 2 correct reports and 2 errors.
Power View can only print one sheet at a time. Please switch to the desired sheet and try again.
Why this occurs? What should done in Excel?
Kenny_I

Thank you for reporting this issue. This is a known issue that we had fixed last week. In a few days, the updated version of the app will be available in the Windows store. At that time, your app should automatically get updated to the newest version, if
you have not changed your default settings.
If you still experience issues next week this time, please post back and perhaps share your workbook, so we can do a thorough investigation.
Thank you.

How to print a grid from windows phone 8.1 application

Hello ,
I want to print a grid from a windows phone application.
For tablet I can print using this namespace:
using Windows.Graphics.Printing;
using Windows.UI.Xaml.Printing;
But they are only for Tablet.
Please suggest a solution of printing from windows 8.1 phone application.
Thanks

Hi waqar.haider.confiz,
>>How to print a grid from windows phone 8.1 application
As far as I known, in Windows Phone 8.1 app it does not have such API for us to print a grid. I will recommand you submit this feature request on this
UserVoice forum.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to print Contact Sheets from iPhoto

Hi there,
Since installing Lion 10.7.5 on my Mac Pro I no longer get the option to print Contact Sheets from iPhoto. I'm running quite an old version of it I think (Version 6.0.6), however this was no problem before the upgrade.
Can anyone suggest a solution for this?
Thanks in advance.

I just fired up my iPhoto 6.0.6 under Mt. Lion and I have no contact option in that version either. You'll have to upgrade to at least iPhoto 7 (08) in order to get contact sheets back. So you might as well upgrade to the latest iPhoto from the App Store.
If you also want the latest versions of iWeb and iDVD (which have been discontinued by Apple) you'll have to purchase a copy of the iLife 11 disc from a 3rd party retailer like Amazon.com: iLife 11.
OT

How to restore one table from the previous backup in 9.2.0.8 version.

Hi,
How to restore one table from the previous backup in 9.2.0.8 version.
Thanks
-Ganga

Hi,
What is the table you want to restore?
Using export/import is supported with Oracle Apps database (for full database exp/imp, and certain schemas like custom ones). For the Apps schema, I believe it is not supported due to object dependencies and integrity constraints.
Regards,
Hussein

How to make one dvd from several camcoder dvd's

How to make one dvd from several camcoder dvd's. I got a dvd camcoder, to be able to play them into DVD player I had to finalize my disks. Now I got several DVD's whith short files and terrible custom camera menu. I'd like to make it more presentable.
The main problem is I dont want to recode my vob files. So Final Cut and other editing soft is bad idea.
Is there any soft on mac I could reauthor my DVD's?

How to make one dvd from several camcoder dvd's. I got a dvd camcoder, to be able to play them into DVD player I had to finalize my disks. Now I got several DVD's whith short files and terrible custom camera menu. I'd like to make it more presentable.
The main problem is I dont want to recode my vob files. So Final Cut and other editing soft is bad idea.
Is there any soft on mac I could reauthor my DVD's?

How do I transfer contacts from a gmail account to an iPad contact list?

How do I transfer contacts from a gmail account to an iPad contact list?

There are countless articles about this on the internet. Here is one. It works the same way on the iPad as it does on the iPhone.
http://www.maciverse.com/add-gmail-contacts-to-ios-5.html
Here are more ....
http://www.google.com/search?client=safari&rls=en&q=transfer+gmail+contacts+to+i pad&ie=UTF-8&oe=UTF-8

How can I transfer pictures from my MacBook Pro to my iPad mini please?

How can I transfer pictures from my MacBook Pro to my iPad mini please?

If you are on iTunes 11 on your Mac then you may want to re-enable the left-hand sidebar via View > Show Sidebar, which might make it easier to navigate and may instructions may make more sense.
To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes (if you've enabled the sidebar), and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
If you haven't enabled the sidebar, then from your library click 'iPad' at the top right of the screen and you should get a series of buttons along the top of the screen, including one for Photos

How to print one sheet from a Numbers spreadsheet on an iPad?

Similar Messages

Maybe you are looking for