How to print out fillable fields only

I'm a newb, help! I am trying to create a form in LiveCycle.
I have brought in a pdf, made some fillable fields. So far so good, here's where I'm struggling.
I want the recipient of the pdf to fill out the forms, (while still seeing the pdf in the background), BUT when they print, I want them to ONLY print out the information that they filled in the fillable fields.
So basically, they receive a document in Adobe Reader, it has a pdf in the background, and they fill in some fields, then they place a page in their printer to just print the fillable fields only.
Does anyone know if this is possible?

"You can control the visibility of objects using the presence property"
Here is where I get confused. I understand that you can change the visibilty in this area, but I want the pdf background that is part of my form to be the area that doesn't print, so I can't understand how I highlight that particular area to switch it to "screen only" because it isn't really considering a text field or anything like that, it was just a pdf that I imported from the start and then built all my text fields on top of.

Similar Messages

How do I print out a picture only within an e-mail. It is not an attachment to the e-mail.

I know how to print out a picture from an attachment but this particular picture is included in the body of the e-mail and that's where I'm lost.
Thanks, June

Hi
Its a pleasure ....Say Thanks by Clicking on Kudos
Click the KUDOS star on the left to say 'Thanks'

How to find out important fields in table like MARA?

How to find out important fields in a table for example like MARA?
Details: In R/3 or ECC table for example MARA;
1) How to find out what are the important fields?
2)Does the table have only key figures not characteristics right?
3) There are so many tables in FI; Can you please tell me what are the important tables?
4) There is any easy automatic way to figure out that the particular datasource for example 2lis_02_item is pulling data from so and so table. I like to know the process not the results please.
Thanks in advance.
York.

Hi York,
Let me go by points:
1. There is nothing like important fields ... The question could be Key fields ... the fields which identify a record uniquely ... If you go to SE11, and go inot the dispaly of MARA table ... you will see that there is tick mark under key to indicate that the field is a key field ... All the fields which are so marked would identify a record in the table uniquely. If your question is otherwise ... (Important fields) ... then it depends on the purpose you wnat to meet ... Some fields might be important for me but not for you ... so there is not hard nad fast rule for important fields.
2. No... Tables in R/3 or ECC would contain both Key figures and characteristics.
3. Important tables in FI would be BKPF, BSEG and BSET.
4. The procedure for finding out which table are used by say 2lis_02_item would be different from that of other non LO/LIS extractors.
In case of LO/LIS turn on the trace (below process) while populating the setup tables and for thoers while executing RSA3.
1. Open one session and go to ST05, click on "Activate Trace"
2. Open another session and execute the transaction you want to track for the tables it is going to hit.
3. Go to the session of point 1 above and click on DEACTIVATE TRACE
4. Click on DISPLAY Trace
This will show you all the tables that were hit while extracting data. Point to remember here is ... it will hit some standard tables as well ... so you will have to filter out what is relevant from what is not.
Hope this helps.
best regards,
Kazmi

How to print the text in only last but one page in sapscripts

hiiiiiiiiiii,
explian how to print the text in only last but one page in sapscripts? wher to write the code? plz if possible explain in detail with an example?

Hello,
The total no pages is given by &SAPSCRIPT-FORMPAGES& command.
So u can handle the situation in ur form like this
/: if &PAGE& = &SAPSCRIPT-FORMPAGES&
p1 TEXT
/: endif
Try in this way it may help u.
Regards

How to print out time as hr:min:sec without AM/PM?

how to print out time as hr:min:sec without AM/PM
since hr specifies AM/PM. Thank you. My first thought
is that there exists a formatter to do this. My second
thought is that if not I can convert the AM/PM in the
DateFormat.MEDIUM to the right hour.

import java.text.*;
import java.util.*;
public class Test {
    public static void main (String [] args) {
        SimpleDateFormat format = new SimpleDateFormat("HH:mm:ss");
        Date d = new Date();
        System.out.println( format.format(d) );
}

How to print * in Password Field

Dear ALL,
               Can anybody tell me to how to print * For Password field.What is that type?
Regards,
Mayank

Hi Mayank,
Refer the code below. This code is checking the Password against a custome database table.
Hope this helps you.
REPORT YLAX_TEST7                              .
tables :ZS_ETTIFN_REP.
data : i_ettifn like zs_ettifn occurs 0 with header line,
       ws_lines(10) type n.
PARAMETERS: p_pass TYPE xuncode.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name = 'P_PASS'.
      screen-invisible = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
START-OF-SELECTION.
select * from ZS_ETTIFN_REP into table i_ettifn .
describe table i_ettifn lines ws_lines.
WRITE: / p_pass,ws_lines.
<b>Reward points if this helps.
Manish</b>
Edited by: Manish Kumar on Feb 11, 2008 12:15 AM

When I type a document and try to save it, there are black lines over my sentences, as if it had been highlighted, and that's how it prints out, just black lines

when I type a document and try to save it, there are black lines over my sentences, as if it had been highlighted, and that's how it prints out, just black lines

Hi Vickey, S,
Sorry for the delay in response. Is it happening with all the files?
Also, please write the steps you are taking to type in the document.
You might try uninstalling and re installing the Reader in case it is happening with all the files.
URL to install the Adobe Reader is Adobe - Adobe Reader download - All versions
Thanks,
Vikrantt Singh

How to print out answers using the form I created

I created an application form for my company. People have submitted their applications, but I do not know how to print them out.
Is there a way to copy the answers into the form and print that? Or something like that?
I cannot just print the answers because it's over 100 pages and would be disorganized.
I basically just need to know how to print out the form I created with the respondants answers.
Thanks

Here is what you can do...
Open the form file
Go to the View Responses tab
Select the View menu in the upper right corner of the UI
Select the Details View menu item on that menu
The Details View pane will open on the right side of the window
At the bottom of that pane there is a set of buttons
The first button let's you print the detail view of the currently selected response
The last button labeled Export will create a PDF file of the selected response
Is that what you were trying to accomplish? I'll admit that we need to make print and export to PDF more discoverable and easier to get to - that was too many steps
Randy

How to print out multilingual reports from the main report using Xliff temp

Hi all,
How to print out multilingual reports from the main report using Xliff temp?
When I want main report call subtemplate and finish xliff tranlation
<?for-each@section:INVOICE?><?end for-each?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
Prints out fine with Finnish translation
But if I want in main program to check what language is used e.g.
if trx_number = 142 call Finnish translation and if trx_number =144,
call English translation.
<?for-each@section:INVOICE?><?end for-each?>
<?if:TRX_NUMBER=’142’?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
<?end if?>
<?if: TRX_NUMBER=’144’?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.US/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
<?end if?>
Prints out always in English and never the Finnish translation.
Program goes fine to if branch but does not print out Finnish
Does anybody know what could be wrong?
BR
Kari

Thanks Amit,
I have two layout, main-layout and sub-layout
Main layout call subtemplate
I have registered layout and xliff-file
Main template
Localized Templates
File Name           Language Territory
XXNS_INVOICE_MAIN.rtf      English
SUB template
Localized Templates
File Name           Language Territory
XXNS_INVOICE_SUB.rtf      English
Translatable Template
File Name           Language      Territory
XXNS_INVOICE_SUB.rtf      English      United States
Available Translations
Language Territory Progress
English Finland Complete
If main report call subtemplate and finish xliff tranlation
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
Prints out fine with Finnish translation
But if I want in main program to check what language is used e.g.
if....
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
.....end if;
if....
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.US/?>
.....end if;
Prints out always in English and never the Finnish translation.
Program goes fine to if branch but does not print out Finnish
Do you it's set up problem or program problem
BR
Kari

How to print out the position of 2 dimension arrays?

there are 2 dimension arrays, how can print out the position of value than 4?
for example
0 2 3 2 2 2
0 1 1 2 5 3
1 2 3 3 2 1
print out:
The pos is ( 5,2).

Hello
If I understand your question correctly, you are trying to print out the indexes where the value in your matrix is greater than 4
If this is the case, then what you need to use is nested for loops e.g.
for (int i = 0; i< array[0].length; i++)
for (int j = 0; j< array[].length; j++)
int value = array[i][j];
if (value > 4)
System.out.println("The pos is (" + i + "," + j + ")" );
Regarding the syntax I have used to get the size of the array, I am not sure if this is correct, but you should have an idea of what I am doing.
Sajid

How to find out which field belongs to which table

Dear all
How to find out this "Field name:- LFSNR" belongs to which table.
regards
M.Chandra mohan

Hi
You can go to SE84.
ABAP Dictionary --> Fields --> Table fields
Enter field name and execute. You will get list of table where this field is exist.
hope it helps
regards
Srinivas

How to drag out additional field in document printing in B1

Hi all expert,
My customer need additional field or information to be show at the document printing window in standard B1. Example like customer name or user define field for warehouse.
The standard B1 document printing is limited with the form setting is disable. User wanted additional information like printing status, warehouse(using user define field) , customer name able to show out on the document printing window screen.
Any idea about it? How can i to do it besides using SDK? If using SDK, what is the code i should write?
Can you give some sample code?
Regards,
Eric Tan

Hi all friends,
My question still un-answered yet. I think i have to clarify here.
What i mentioned is when user go -> Sales A/R -> Document Printing, select A/R Deliveries. A list of A/R Deliveries display in the windows form.
There is only limited field available in the windows form. User now wanted additional field like customer name & warehouse appear also at the document printing form. But the form setting for this windows is dissable.
I know we can done it using the PLD. But..Can we add in the information like customer name & warehouse code in the document printing form before print out. User need this information to control which warehouse A/R deliveries note have to print out. Example we have 10 deliveries order, it may be need delivery order 1,3,5,8 to print out.
Thanks. Hope you guy can help.
Regards,
Eric Tan

SQL Server 2012 Management Studio:In the Database, how to print out or export the old 3 dbo Tables that were created manually and they have a relationship for 1 Parent table and 2 Child tables?How to handle this relationship in creating a new XML Schema?

Hi all,
Long time ago, I manually created a Database (APGriMMRP) and 3 Tables (dbo.Table_1_XYcoordinates, dbo.Table_2_Soil, and dbo.Table_3_Water) in my SQL Server 2012 Management Studio (SSMS2012). The dbo.Table_1_XYcoordinates has the following columns: file_id,
Pt_ID, X, Y, Z, sample_id, Boring. The dbo.Table_2_Soil has the following columns: Boring, sample_date, sample_id, Unit, Arsenic, Chromium, Lead. The dbo.Table_3_Water has the following columns: Boring, sample_date, sample_id, Unit, Benzene, Ethylbenzene,
Pyrene. The dbo.Table_1_XYcoordinates is a Parent Table. The dbo.Table_2_Soil and the dbo.Table_3_Water are 2 Child Tables. The sample_id is key link for the relationship between the Parent Table and the Child Tables.
Problem #1) How can I print out or export these 3 dbo Tables?
Problem #2) If I right-click on the dbo Table, I see "Start PowerShell" and click on it. I get the following error messages: Warning: Failed to load the 'SQLAS' extension: An exception occurred in SMO while trying to manage a service.
--> Failed to retrieve data for this request. --> Invalid class. Warning: Could not obtain SQL Server Service information. An attemp to connect to WMI on 'NAB-WK-02657306' failed with the following error: An exception occurred in SMO while trying
to manage a service. --> Failed to retrieve data for this request. --> Invalid class. .... PS SQLSERVER:\SQL\NAB-WK-02657306\SQLEXPRESS\Databases\APGriMMRP\Table_1_XYcoordinates>   What causes this set of error messages? How can
I get this problem fixed in my PC that is an end user of the Windows 7 LAN System? Note: I don't have the regular version of Microsoft Visual Studio 2012 in my PC. I just have the Microsoft 2012 Shell (Integrated) program in my PC.
Problem #3: I plan to create an XML Schema Collection in the "APGriMMRP" database for the Parent Table and the Child Tables. How can I handle the relationship between the Parent Table and the Child Table in the XML Schema Collection?
Problem #4: I plan to extract some results/data from the Parent Table and the Child Table by using XQuery. What kind of JOIN (Left or Right JOIN) should I use in the XQuerying?
Please kindly help, answer my questions, and advise me how to resolve these 4 problems.
Thanks in advance,
Scott Chang

In the future, I would recommend you to post your questions one by one, and to the appropriate forum. Of your questions it is really only #3 that fits into this forum. (And that is the one I will not answer, because I have worked very little with XSD.)
1) Not sure what you mean with "print" or "export", but when you right-click a database, you can select Tasks from the context menu and in this submenu you find "Export data".
2) I don't know why you get that error, but any particular reason you want to run PowerShell?
4) If you have tables, you query them with SQL, not XQuery. XQuery is when you query XML documents, but left and right joins are SQL things. There are no joins in XQuery.
As for left/right join, notice that these two are equivalent:
SELECT ...
FROM   a LEFT JOIN b ON a.col = b.col
SELECT ...
FROM   b RIGHT JOIN a ON a.col = b.col
But please never use RIGHT JOIN - it gives me a headache!
There is nothing that says that you should use any of the other. In fact, if you are returning rows from parent and child, I would expect an inner join, unless you want to cater for parents without children.
Here is an example where you can study the different join types and how they behave:
CREATE TABLE apple (a int    NOT NULL PRIMARY KEY,
b varchar(23) NOT NULL)
INSERT apple(a, b)
   VALUES(1, 'Granny Smith'),
   (2, 'Gloster'),
   (4, 'Ingrid-Marie'),
   (5, 'Milenga')
CREATE TABLE orange(c int NOT NULL PRIMARY KEY,
d varchar(23) NOT NULL)
INSERT orange(c, d)
   VALUES(1, 'Agent'),
   (3, 'Netherlands'),
   (4, 'Revolution')
SELECT a, b, c, d
FROM   apple
CROSS JOIN orange
SELECT a, b, c, d
FROM   apple
INNER JOIN orange ON apple.a = orange.c
SELECT a, b, c, d
FROM   apple
LEFT   OUTER JOIN orange ON apple.a = orange.c
SELECT a, b, c, d
FROM   apple
RIGHT OUTER JOIN orange ON apple.a = orange.c
SELECT a, b, c, d
FROM   apple
FULL OUTER JOIN orange ON apple.a = orange.c
go
DROP TABLE apple, orange
Erland Sommarskog, SQL Server MVP, [email protected]

How to print out a date from the past

I am trying to print out a date from the past but I cant seem to get It,
Lets use for example Independece Day,
How would you write the code in order to print out that exact date?

Look at the
[url=http://java.sun.com/javase/6/docs/api/index.html?
java/util/Date.html]Date APIActually the Calendar class would be better to use, since you can set all the different fields from year to second, plus things like day of week, day of month, week of year, etc.
too slow
Message was edited by:
hunter9000

When I fill fields on a form and ask to print using form fields only, the infomation doesn't show up. Other people in the office use the same form with no problem. Using XI standard.

I have a fillable form that is used by everyone in the office. When the fields are filled we print using the form fields only option to print on our invoices. When I go to print it in Acrobat XI standard using the form fields only option, none of the information I filled shows up or prints. No one else in the office has this problem. Does anyone know why I can't do this, but other people can?

I have a fillable form that is used by everyone in the office. When the fields are filled we print using the form fields only option to print on our invoices. When I go to print it in Acrobat XI standard using the form fields only option, none of the information I filled shows up or prints. No one else in the office has this problem. Does anyone know why I can't do this, but other people can?

How to print out fillable fields only

Similar Messages

Maybe you are looking for