How to print page in front and back in scripts

hi,
I want to know to know the how to print a page in front and back.

HI Ragavendra
set this
<b>Print mode is D</b>
With Print mode, you can specify single- or double-sided printing for a page. You can choose from the following values:
<b>D </b>The page is printed on the first side of a sheet in duplex mode. If another mode was previously active, then the printer is switched to duplex mode with the start of the pageand continues in this mode.
and other Print mode options are
<b>Print mode</b>
With Print mode, you can specify single- or double-sided printing for a page. You can choose from the following values:
<b>' '</b> Currently active printing mode continues unchanged.
<b>S </b>The page is printed in simplex mode. That is, the printer should print on only one side of the paper. If another mode was previously active, then the printer is switched to simplex mode with the start of the page.
<b>D</b> The page is printed on the first side of a sheet in duplex mode. If another mode was previously active, then the printer is switched to duplex mode with the start of the pageand continues in this mode.
<b>T </b>The page is printed on the first side of a sheet in tumble duplex mode. That is, the printer prints on both sides. The page on the second side is always inverted, so that the footer of the second page is printed opposite the header of the first page.
If another mode was previously active, then the printer is switched to tumble duplex mode with the start of the page and continues printing in this mode.
Print modes are currently supported for printers that use the PCL-5 language. These are printers that are defined with the following SAP device types: HPLJ_II, HPLJIIID, HPLJ4, LX4039, SNI20XX8.
See the spool system (transaction SPAD) to check on how your printers are defined.
The print controls for these functions are SPMSI (begin simplex printing); SPMDU (begin duplex printing); SPMTU (begin tumble duplex printing); SPMFS (print on first side of sheet in duplex or tumble duplex mode); and SPMBS (print on second side of sheet in duplex or tumble duplex mode).
Regards Rk

Similar Messages

  • HP Laserjet 4P has a 1" toner stain that runs down the left side of page.(front and back)

    Hello all,
    This is my first post here and I hope someone can help me. 
    We have a HP Laserjet 4P that we have used for a few years and recently have had a problem of a 1" toner stain that runs down the left side of the printed page(both front and back side). I have replaced the cartride and cleaned everything I know to clean. When I remove the cartridge, there is a little pile of toner on the left side just in front of the horizontal silver bar that is behind the roller. I have cleaned it up several times. Each time I try to print, The toner stain appears on the printed page again and leaves a new pile of toner in the same place.
    Does anyone have any experience with this problem? I am not sure if it is a worn part or a maintenance issue.
    Thanks in advance for any help.
    Fish

    Hi ProspeorusCE,
    The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
    Here is the link to the Commercial Laserjet board:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • How to create / design a 2 page brochure (front and back) in photoshop ?

    I need to design a 2 page brochure (front and back) in photoshop, how to start ?
    I need to create this brochure for high quality printing, so what things I need to make sure ?
    Also I need to know how to create it with bleed space or without bleed space ?
    Please help
    Version: Photoshop CS6 Extended

    There is no requiremend for bleed size etc (I just wanna know how to create copy with or without bleed at any time and where to mention the size of bleed). The format is PDF, 300dpi.
    I would appreciate if you could answer my above question so that I can start and go in a right direction.

  • How do I see the front and back arrows on the left hand side of my macbook pro?

    How do I see the front and back arrows on the top left hand side of my macbook pro?

    Click "View' menu in the application menu bar select Show Toolbar
    or
    click "Customize Toolbar" and drag the arrows or "default set to the Toolbar".
    Best.

  • How many megapixels is the front and back cam on ipad 2?

    i wanna no how many MP are the fron and back cam in an ipad2 3G and Wifi version

    While those numbers seem low its important to remember what the ipad cameras are for. They are not for taking photos. Who wants to hold up a huge ipad to take photos anyway when the chances are we all own a camera phone with much higher resolution or better yet, a real camera.
    The cameras are designed for video. The front camera is good enough for facetime only while the rear can handle 720p video. Again, enough for a video call but thats about it.

  • How can I keep the front and back of a photo together in a single image?

    I'm running PSE 8 on XP with SP3.
    I'm getting ready to upgrade to PSE 9.
    My cousin just sent me 24 old family photos.
    On the back of each photo is a lot of information.
    Who is in the picture, where it was taken, what the event was, etc.
    What I'd like to be able to do is to scan these images in and somehow keep the front and the back of
    each photo together in a single image. That way I can post them to a photo web site and people
    can look at the image and read what it is.
    I have a Lexmark Pro 205 printer/scanner.
    Thanks for any thoughts or suggestions!

    I worked on one of the pictures with your Mom and Dad. These scans are quite good and there is a lot of information in them. One can spend a lot of time fixing them up - good project!
    Here is what I did:
    Duplicated background layer
    Applied Brightness/contrast adjustment layer, worked the sliders
    Merged down
    Sampled sky with eye dropper tool, opened blank layer at top of stack, used brush tool to cover a few of the spots in the sky (?dust)
    Merged down
    Accessed Smart brush tool, selected black & white in drop down, selected high contrast b&w, covered the sky with that
    Selected Yellow filter, and covered the ground
    Merged down
    Opened a blank layer at top of stack and added a couple of clouds
    Applied Photofilter adjustment layer, warming filter LBA, adjusted density
    Sharpened slightly with unsharp  mask
    Merged visible
    Applied stroke
    On review, the spots in the sky need additional work - they show up more on-line than in PSE.  Can be fixed in step #4.

  • PDF files, front and back.

    In Adobe Illustrator CS2, is there a way to create a PDF file that is set up to print on the front and back of a page? I have my document currently set-up as an Illustrator file with multiple-page tiles.

    Your printer must be capable of printing on both sides, and every printer can have a different location where you change that setting.
    For example here is where you find them for the printer I am on, incase this helps. Click and hold mousedown on copies and pages, choose fiery features.
    Change 2-sided Printing to any setting but Off.

  • How do I print front and back with two pages per sheet? (OSX Lion)

    I can't find a simple solution to my situation...
    I'm using Max OSX Lion 10.7.3 and Adobe Reader X 10.1.2. 
    I want print two PDF pages onto one printed sheet, and I want to print front and back.  When I go to the print settings and select two pages per printed sheet, the sample window shows me what I'm looking for.  But when I tell it to print odd only or even only, it changes the print selection.  Here's what happens...
    Let's say I have a PDF document that is 20 pages long.  When I tell it to print two PDF pages per sheet, it shows me that the first pages printed will be PDF pages 1 and 2.  When I tell it that I want it to print odd pages only, it tells me that the first printed page will contain PDF pages 1 and 3.
    In other words, Adobe Reader wants to print the odd PDF pages instead of the odd pages of the printed document (PDF pages 1 and 2, then 5 and 6, then 9 and 10, so on).
    So that I'm being clear...
    This [  ] is a printed page.  The numbers inside the brackets represent the page numbers in the PDF document...
    What I want to print is this...
      FRONT   ||  BACK
    [1,2]    ||  [3,4]
    [5,6]    ||  [7,8]
    [9,10]   ||  [11,12]
    [13,14]  ||  [15,16]
      [17,18]  ||  [19,20]
    What would end up printing is this...
      FRONT   ||  BACK
      [1,3]    ||  [2,4]
      [5,7]    ||  [6,8]
      [9,11]   ||  [10,12]
      [13,15]  ||  [14,16]
      [17,19]  ||  [18,20]
    Aside from telling it exactly which PDF page numbers to print (this would be a taxing job because I'm working with a 273 page document), is there an easy and simple way to print how I'd like?

    I would suggest to use Adobe Ilustrator. Also I get an error message when I try tp access the sample document.
    You can download Illustrator using Adobe Creative download - http://www.adobe.com/products/illustrator.html
    ~Deepak

  • HP8600 Jams printing front and back when 4 or more pages

    System- Windows 8.1 PrinterHP Officejet Pro 8600 N911a.  Model N911a Product number CN578A.  Firmware version CLP1CN1322CR.  Duplexer: Installed.  ADF: Installed.
    When printing front and back multiple pages of 4 or more pages the printer jams in the flip chamber.  Both settings Printing [Front to Back] or [Back to Front] will jam.
    I believe this occurred after going to 8.1 from 8.0, however, I am not sure.
    Lameduck_9 

    Hello @Lameduck_9 , and welcome to the HP Forums!
    I can see from your post you are experiencing jam issues.  I would like to help!
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HT4356 I'm using my iPod and an Epson XP-810 printer to print pages from websites and emails and etc.  How do I print just 1 page out of 14 pages .  I don't see any settings on my iPod and can't find settings on the printer .   Can someone help with this

    I'm using my iPod and an Epson XP-810 printer to print pages from websites and emails and etc. 
    How do I print just 1 page out of 14 pages . 
    I don't see any settings on my iPod and can't find settings on the printer .  
    Can someone help with this problem

    Google show that you have to cut what you want to print and then paste it into a new app and print from that app.
    http://www.ipadforums.net/new-member-introductions-site-assistance/63145-printin g-one-page-ipad-2-a.html

  • How to print header in first and last  page only in SAPSCRIPT

    Hi!
    How to print header in first and last  page only in SAPSCRIPT,
    in between pages,  I need to print all line items in MAIN window only .
    Thanks in anticipation!
    Aki.

    Hi All,
    Thanks for your early update...but my requirement here is
    I have two pages (FIRST , NEXT ) First is having Header, Main and Footer
    NEXT is having Main and Footer ..I am printing PO here..let us think that my PO is having 20lines items , let us assume that it takes five pages...
    Now how application is printing is ..first set of data is printing in FIRST page and remainiang data distributed to 4 pages printing in NEXT page ..but what my requirement is , I need fifth page print on FIRST page, instead of NEXT page... Ultimately I need last set of data always print in FIRST ie out of 5 pages 1st print on FIRST 2nd 3rd 4th print on NEXT and 5th print again on FIRST .
    hope you this will clear you.
    Thanks!

  • How much does it cost to replace a iPod touch 5g. the screen is completely broke and digitiser and theres no front and back camera??

    how much does it cost to replace a iPod touch 5g. the screen is completely broke and digitiser and theres no front and back camera??

    Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 5Gs. They do not fix yours. Note the older 16 GB 5G has only a front camera and the other 5Gs (16 GB released late last month and the 32 and 64 GB 5Gs have both front and back cameras)
    Apple - iPod Repair price                                    
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit                  
    Identifying iPod models

  • The front and back camera on my itouch second generation stopped working. Any thoughts on how to fix it?

    The front and back camera on my itouch second generation stopped working. Any thoughts on how to fix it?

    First, try to reset the device by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
    If this does not work, set it up as new device again, explained in this article:
    How to back up your data and set up as a new device
    If still no luck, get it serviced, the issue might not be software related.
    Apple - Support - Service Answer Center

  • My black iphone4 front and back screen broke, how much does apple charge to fix that and can i get it in white?

    My black iphone4 front and back screen broke, how much does apple charge to fix that and can i get it in white?

    "why cant i get it in white?"
    Return your iPhone to Apple for repair/replacement, and ask for a white one.  It couldn't be simpler.  Whether Apple will comply with yuor request is another matter.

  • I cracked both front and back screens how much does this cost to get fixed

    dropped my iphone 4s and cracked the front and back screen phone still works fine i beleive its just the outer shell how much will this cost to get fixed and where is the best place to get this done

    $199. make an appointment at the genius bar of your local Apple Store.

Maybe you are looking for