How to print page numbers on physical pages conditionally?

Hi,
my report has a single logical page comprising of 3 reapeating frames , each getting printed on 3 different physical pages. I need to print page number at the bottom of the page in the case of two repeating frames while on the side of the page in the third case. How do I do this?
TIA
Ranjit

i think u only need to say page break before on ur third repeating frame and ur problem is solve.
repeating frame 1 and 2 on the firstpage getting page 1 and repeating 3 on page 2.
cheers.

Similar Messages

  • How to print all columns in one page

    Hi,
    Can anybody explain me how to print all columns in one page.we have around 15 to 20 columns for 4 reports and all these reports are build on one multiprovider.we are using BW 3.5.
    Can anyone explain me  how to print ALL COLUMNS IN ONE PAGE  .currently they are getting all columns in 2 to 3 pages. They are using PORTAL to run the reports here.
    Is it possible to do by customizing Webtemplate or by macros in Workbook.Please help me
    Edited by: kotha123 on Oct 11, 2010 5:58 PM

    Hi,
    Your best bet is to use a workbook template or else Excel to pdf option...Thanks

  • How to print new line in jsp page

    hi
    how to print new line in jsp page
    thanks

    \n - new line character is in java specific not HTML
    specific.Well, if the correct line separator sequence (by far not always \n) would be used, it does add a new line to the HTML output. Too bad that you don't want to see HTML but formatted text. The BR tag is a formatting element for the displayed text, not a line break in HTML. ;)

  • How to print multiple footers for each page in RTF template xml report.

    Hi,
    How to print multiple footers for each page in RTF template xml report.
    i am able to print ( two sets ) ...
    up to last page ( one template ) and for last page ( another template).
    i want to change the footer information based on the group value printed in the report ( it might be 5 to 6) In every report run.. can you please check and let me know do we have any feasibility to achieve this.
    Thanks in advance.
    Regards,
    KAP.

    You can remove all other logic, like last page only contents (start@last-page:body), etc and section breaks if any you have inserted manually.
    Just have for-each@section logic.
    It would be difficult for me to guess what you have done without looking at your RTF or describing here.

  • How do I add page numbers on a Pages doc.?

    How do I add page numbers on a pages doc.?

    It won't work in Layout mode documents but in Word Processor documents:
    1. Add a Textbox and move it to the top right, turn off Textwrap
    2. Insert a page number in the box
    3. Select the Textbox: Menu > Arrange > Section Master > Move Objects to Section Master/Make Master Objects Selectable
    4. Insert a Section Break on each page. It has to be a Section break otherwise editing the Master Objects will repeat on previous pages.
    Peter

  • Hyperion Anaylzer - how to Print report with information in pages?

    Hi,<BR><BR>I use Hyperion Analyzer Version: 6.1.1.00206 (from Help | About menu).<BR><BR>I created report with pages (on Navigate button selected the Pages). In pages are months (January, February, March, etc).<BR><BR>Now I would like to print current report. So I did:<BR>1. click on arrow beside Print button<BR>2. Print Current Report windows is displayed. I selected default options and press OK button.<BR><BR>Report is printed, but there is no page information printed out. So on paper there is report without months (January, February, March, etc).<BR><BR>How to print report with information in pages?<BR><BR>Thanks,<BR>Grofaty

    Jia Shun,
    I had the same issue for printing A/R Invoices - I created a Crystal Report based on a SQL View, works fine with A/R Invoice document, but the Draft Invoice printing has 3 pages: 1st page blank, 2nd page with watermark "DRAFT", 3rd page my Crystal Report layout without any data. When printing normally it is only 1 page.
    Here is what I did as a work around:
    Create two SQL Views, one select from OINV (joining INV1 and other tables needed), the other select from ODRF (joining DRF1 and other tables needed), for the draft printing.
    Create two identicle Crystal Reports, only difference are: datasource location (from different views), the "draft" crystal report has a watermark section.
    Go to Administration>System Initialization>Print Preferences and uncheck "Print draft watermark..."
    Import both crystal reports. Invoice can be printed normally. But the Draft Invoice has more steps: Open Draft document report, change settings so it shows the DocEntry in the Draft Table. Select and open the desired document, hit Print Preview, and enter the DocEntry, it displays the layout with data and "DRAFT" watermark.
    This is a workaround. I don't like it because it is not scalable - too much workload if you want to print 100 invoices.
    Hopefully someone will provide a better solution.
    regards,
    G

  • Let's say I have a document that is 5 pages long. Now I want to insert the page numbers, starting on page 3 with the number "3" and leaving out pages 1 and 2. How do I do that?

    Let's say I have a document that is 5 pages long. Now I want to insert the page numbers, starting on page 3 with the number "3" and leaving out pages 1 and 2. How do I do that?

    I just found the answer myself. I don't know how to delete my question, so I'll just write the reply to the answer - just in case somebody needs to know: Insert a section brake after the second page and then choose "Start on 3".

  • Page numbers on ALL pages

    I'm trying to insert page numbers on ALL pages in a document in InDesign CS4. But I can only get page numbers to the page 74? This is so annoying, and it's due on monday, and I'm running out of time. Can anybody tell me, short and easy, how I can get page numbers on every page in my document? (Besides the front page - but I know how to not get the page number there.)
    Thanks!
    Ingvild

    Huh? Simply put, you place the page number marker in a text frame on your master page(s), and you ensure that one of those master pages is applied to all pages where you want a page number.
    Is that what you've done? What is not working? Is it page 74 and higher that is a problem? Just page 74?
    Does page 74 use a different master page that doesn't have the page number marker?
    Or is your document corrupt? [Did you try exporting to IDML or INX and re-opening the export?]

  • Different format for page numbers on different pages

    Hi guys,
    Currently I'm about to finish my thesis. Pages has been a great help with everything, until now. The problem is that I want to add page numbers, but some pages should have a different numbering then others. To clarify here is my table of contents with the desired page numbers:
    -Figures          i
    -Tables          ii
    -Acronyms     iii    
    -Chapter 1     1
    -Chapter 2     15    
    -Chapter 3     27
    -Appendix     iv
    -Summary     v
    So the stuff that is not directly main content should be numbered in roman numbers. The chapters then can have normal numbers.
    I've been trying for a while to make this happen now, but without luck. Anyone know how to accomplish this? I would be very thankful.

    Divide into Sections by inserting section breaks between and make the Roman numerals the first part and restart the numbering at Chapter 1:
    Inspector > Layout > Section > Start at: 1 / uncheck Use previous headers and footers
    To change the numbering format in the header or footer, right click on the page number and choose what you want.
    Peter

  • How to generate row numbering over several pages in PAGES??

    How can I generate row numbering over several pages in PAGES??
    e.g. Page1 1-35
    Page2 36-...

    Hi Labrat,
    My suggestion would be to create a Template in the Page Layout mode. This template would have a 1-column Table to present the line numbers and a Text Box for the Body Text. If you want the Line Numbers to stay in alignment with the Body Text, set the spacing for both to Exactly. Set the Table Cell Borders to None. The faint cell borders that you see in the following example are there because I am in View Layout mode. They will not show when printed.
    For my example I have used Format > Advanced > Capture Pages to create a Pull-down +Page option for a Numbered Line Page. You can Capture as many versions of your numbered pages as you like to avoid having to modify the Line Numbers on successive pages.
    Here's my example:
    Regards,
    Jerry
    Message was edited by: Jerrold Green1

  • How to print multiple copies on one page ?

    How to print multiple copies of one document on one page ?
    in coreldraw I used to make the document -for example a business card 5x9 - and when sending to print it automatically placed the number of cards that would fit in my A4 sheet.
    how do I make the same operation in Indesign.
    thanks

    Hi, Peter S.
    >I can see that as a shortcut to printing a page of different cards for multiple people, but to do a simple n-up of a single card it seems overly complex to me. What am I missing?
    * It's just an alternative to copy/paste and step/repeat.
    * For a one-time only use, perhaps it's a little more complex than necessary. But for any future needs, only the content of the data file needs to be changed, either by editing, or by pointing to a new data file. If different cards for multiple people becomes necessary, it's ready to go.
    Regards,
    Peter Gold
    KnowHow ProServices

  • How to print 2 copy of same page in smartform

    Hi,
    I have a form having one page which contains Main and few other windows. I have a template in Main window. My requirement is to print two copy of this page whenever print pgm gets executed. I tried by copying FIRST page as DUPLICPAGE and put this as NExt page to FIRST page but it is not working. Can anybody please suggest how to achieve this.
    Rgds
    Sid

    Hi,
       One way without Coading...
    1. Go to txn. NACE... select your application (for Ex. "EF")... then click on "Condition Records" button
    2. Select your Output Types...(ex. NEU)....
    3. Go to Change condtion Record Screen. Select ur condtion then click on "communication" button..
    4. Under Print Output Check the field "Number of Message" here maintain 2...
    Regards
    GK

  • How to print two voucher in one page?

    HI,
    we want to print two voucher in one paper. what are the steps to be taken in sapscript? is it purely relted to SPAD?
    Regards,
    lijo Joseph

    hi joseph,
    i'm not sure how related this would be to your concern, but in my place, we've implemented that by sizing a voucher as half a page, so that when we print vouchers, the printer would know that one page is half of a regular page. SPAD is one place to fix, but the actual printing program and SAPScript was also customized so that it would send two vouchers for printing consecutively, and would fit in one page.
    ryan.

  • How to print contionus data in next page

    Hi! All
    I'm displaying data using classic list display.
    my requirement is if my total no. of records is 10 need to display first 5 records in 1st page and the next 5 in next page along with these records i'm displaying other details which are like header details for the document. thus while printing next 5 records in next page need to print along with those hedar details .
    how to print it.
    Regards
    Kv

    hiiii  Kv
    the complete information on printing ALVs  has been given in the following ...link
    go through it
    http://help.sap.com/saphelp_sm32/helpdata/en/a6/6dee408a63732ae10000000a155106/content.htm

  • How to print 20 lines in one page and remaining lines in another in script?

    Hi I created 2 pages in script for page1 next page is page2 , how i can print 20 lines in one page and remaining in next page plz send me the code for that and is windows same for 2 pages?...

    Hi Krishna,
    Try below code...
        CALL FUNCTION 'OPEN_FORM'
        EXPORTING
          form                              = form.
        CALL FUNCTION 'START_FORM'
        EXPORTING
         language               = sy-langu
         startpage              = page1
      LOOP AT itab.
        count = count + 1.
        item = count mod 20.
        IF item EQ '1' AND count NE '1'.
           CALL FUNCTION 'END_FORM'.
           CALL FUNCTION 'START_FORM'
           EXPORTING
             language               = sy-langu
             startpage              = <b>page2</b>
        ENDIF.
       "write_form statement ....
      ENDLOOP.
    Message was edited by:
            Hikaruno

Maybe you are looking for

  • I can't delete my Photos in iPhoto 5.  Please help.

    I ran iPhoto diet and iPhoto didn't work after running the app. I dragged my backup iPhoto Library back into the Pictures folder and launced iPhoto. It works fine, except that when I choose a photo in the Library and try to trash it...it won't trash.

  • IPod restored, but now wont put my songs/videos back on

    I was walking the other day, when I tripped. I was holding my iPod and it fell out of my hands and slammed onto the sidewalk. It was scrached but working, so i thought it was fine. So, when I got home, I plugged my iPod into the computer. It charged,

  • Exception Handling Problem In BPM

    All I am facing an exception handling problem I am using BPM and , I have caught exception in the transformation step but when there is any data problem in that mapping(mentioned in the transformation) it is not throwing the exception . is there any

  • Flat File to DB then back to Flat File

    I need to compare the contents of a flat file with two columns in a db table. Then do an insert into the db if there is a difference between the two and the do a select of the latest data on the db then write it to a file. I need help urgently, thats

  • Problems downloading video from camera

    I am unable to download video of more than two minute duration from my Panasonic DMZ-FZ5. While photos download, video snippets ranging from 2 - 30 minutes stubbornly remain on the same memory card. I now have three memory cards (all reputable brands