How to print Photo layouts and Collages with Photoshop CS4?

Hello all,
I just downloaded PhotoShop CS4 trial version and comparing it to Photoshop Elements 6. I noticed that there are no ways to print photo packages nor photo collages in CS4 ! The only thing CS4 can do is to print one photo at the time. Adobe Bridge only allows to output PDF photo layouts without any control on the output.
Can somebody let me know if i need to purchase an Adobe Photoshop CS4 add-on package to be able to print photo packages/layouts and also create collages, or i have to stick with Elements 6 ?
Many thanks for your support !
Sam
Québec City

Dear Bob,
Many thanks for the reply !
I have searched all over the Photoshop forums and never found anything about creating collage in CS4 !
I have contacted Adobe in the last two evenings and the only thing they done were to transfer me back and forth between the Sales and service department and nobody were able to help me out.
This is not a very good image they are projecting !
I am a photograph and a very big PhotoShop Elements user, i downloaded the trail version of CS4, apart from a few added features, i have to say that PE does most of the work i need.
But i still need to convince myself if i want to jump in the CS4 world !
The only stopper for me at the moment, is printing and collage and CS4 seems to be lacking these features.
Instead of directing me to the forum, would you know the direct answers to the following questions:
1- Can i produce JPG format photo collages with CS4?
2- Can i print photo packages / layouts with CS4 ?
Or
3- Do i need to purchase an add-on software package ?
The Adobe Bridge ''output'' menu that comes with CS4 is well done, but you only can make PDF or XML files and you don't have any control on the composition: totally useless for me !
Thanks Bob for your feedback !
If i need to purchase an additional package, i'm removing CS4 from my computer and keeping PhotoShop Elements !
With kind regards,
Sam

Similar Messages

  • How to print from iPad and iPhone with no air print printer

    Have a Kodak hero 9.1 printer. How can I print from iPad and iphone

    Kodak may offer an app to help you.  Check the App Store.
    I have an Epson printer.  There's an Epson app, but its abilities are much more limited than AirPrint (e.g., Epson app does not print from Safari).

  • How to move photos to external harddrive with Photoshop Elements Organiser 9 - Mac user

    I have managed to move a few photos using the organiser to an external harddrive as a trial but noticed that the photos are all stored straight onto the external harddrive and not kept in the subfolders that they are in on my harddrive. Is there a way to keep them in the subfolders - which is basically mostly folders indicating the date they were taken?
    I also noticed that PSE 9 organiser is very slow - I have a lot of photos and a lot in raw - about 21000. Is it better to use LR to catalogue them?
    Last question, has anyone else experienced problems since upgrading to Mavericks when using PSE9? Is there a fix? I read that upgrading to Yosemite has improved how PSE9 works but after my previous experience with upgrading to Mavericks I am not in a rush to upgrade.
    Thanks

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements

  • How to move photos to external harddrive with Photoshop Elements Organiser 9 - Mac user. Upgrade to Yosemite?

    I have managed to move a few photos using the organiser to an external harddrive as a trial but noticed that the photos are all stored straight onto the external harddrive and not kept in the subfolders that they are in on my harddrive. Is there a way to keep them in the subfolders - which is basically mostly folders indicating the date they were taken?
    I also noticed that PSE 9 organiser is very slow - I have a lot of photos and a lot in raw - about 21000. Is it better to use LR to catalogue them?
    Last question, has anyone else experienced problems since upgrading to Mavericks when using PSE9? Is there a fix? I read that upgrading to Yosemite has improved how PSE9 works but after my previous experience with upgrading to Mavericks I am not in a rush to upgrade.  Thanks

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements

  • How to print Photo Info in the Custom Print Package

    I am  using LR CC, latest version on a Windows7 PC.
    I am trying to print Photo Info in the Custom Print package. I have no trouble selecting Photo Info in the Single Image/Contact Sheet Layout Style, but when I switch to the Custom Print Package, the Photo Info check box in the Page panel, disappears. I can't find any reference to this in the manual as to why this would occur, or not be available.
    Appreciate any help with this matter.
    Best Regards
    Steve

    Hi,
    Have a look at: Lightroom Help | Print module layouts and templates
    Only on the Single Image and Contact Sheet layouts can you " ... print information about photos, such as the filename, title, caption, and keywords ..."

  • How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)?

    How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)?  The advertising refers to Print Studio Pro 2 but all I find available to download is version 1.35.

    Thanks - I did notice that the 2 was a superscript on one site but on another (I think the one for the Pro-10 printer) it was definitely a 2 in line with the rest of the text and separated by a space (at least on my browser).  At any rate, I suspected something of the kind and will simply use Photoshop Elements 11 when I want a pattern print until the change is made.
    If you have an inside line to Canon you might also suggest some changes to their Image Garden program, specifically its handling of DVD label projects.  It has several themes and within each theme several layouts.  As far as they go these are fine but they do not give nearly enough flexibility.   The boxes for insertion of images are useful as is the simple procedure for rescaling the image so it is cropped in varying ways while staying within the fixed box.  However, it should be possible (a) to relocate the boxes on the page and (b) to resize and reshape the boxes - probably by a control which would become available by right-clicking on the box.  For example, there are times when the user might want to include a full 16 x 9 frame shot as one of the images, and in general the aspect ratios of the provided boxes do not permit this.
    I have over the years preferred to use Word for this purpose after setting up masks to expose just the printable area of the DVD or Blu-ray disc, setting up the margins so that the center of the disc is in the horizontal center of the page, and finally introducing text and pictures and adjusting the font size of blank lines above the disc to line everything up properly in the vertical direction.  A typical layout might involve one large picture, located so the center hole and the curved outer edge do not block anything important, or two pictures side by side, or four pictures centered vertically (to minimize the effect of the outer edge of the disc) but possibly of different widths (so as to make both close-ups and wide scenes optimal on the same disc label).  The text then goes above and below the pictures.  All of this works perfectly so I probably wouldn't use Image Garden very often for this purpose, but the inability to resize and relocate the boxes must be very limiting for others as well. 
    Some of the layouts have image locations severely reduced by the edge of the disc.
    As I said ... if you have an inside line to Canon .. but if not, please excuse the length of this post!

  • How to print photos from my iphone?

    I have the HP Photosmart C309a,(wireless) and would like to know how to print photos from my iphone 3G.
    I have the "app" "HP ePrint Home & Biz", but I don't know if it's compatible with my printer?

    The app is compatible with your printer IF it is connected to a network (not via USB to a printer).
    If it is not working restart your router by pulling its power plug momentarily.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How to print  both normal and bold data in a single line

    Hi ,
    I have requirement wherin the data need to be displayed in a single line.
    FAX:              Z8525_text.
    where FAX needs to be in bold and Z8525_text is a standard text and it shoould not be bold , both of this needs to be displayed in
    a single line.
    Can you let me know how to print  both normal and bold data in a single line one of which is coming fro standard text.
    Regards,
    Senthil

    Hi Senthil,
    If you are using smartforms, have a character format created for BOLD and apply it to the text you want to highlight. The remaining text of the line could be applied with a Character format which is not highlighted.
    Try and revert in case you need further assistance

  • HT1296 how to transfer photo , music and video from ipad

    how to transfer photo , music and video from ipad

    Sync with itunes on the usual computer you use for syncing.
    For photos and video...
    http://support.apple.com/kb/HT4083

  • How to store photo images and thumbimpressions in oracle 10g database

    Hi all
    I have an web application running in Oracle 10g rel 1 database server in RHEL3. It has application server with forms and j2ee component as middle tier. I need to store centrally photo images and thumb impressions and use it in our application without any overhead on retrieval and performance of web application. what will be optimized method of storage of photo and thumb impressions. Awaiting your valuable suggestions.
    Regards
    Vijay Kumar

    Hi Vijay,
    How to store photo images and thumbimpressions in oracle 10g database I have working code here for storing photos in Oracle tables that you may find useful:
    http://www.dba-oracle.com/t_storing_insert_photo_pictures_tables.htm
    Hope this helps . . .
    Donald K. Burleson
    Oracle Press author
    Author of "Oracle Tuning: The Definitive Reference"
    http://www.rampant-books.com/book_2005_1_awr_proactive_tuning.htm

  • How to sync Address Book and iCal with Samsung GT-S5670 (Galaxy Fit) with Android 2.2 running?

    How to sync Address Book and iCal with Samsung GT-S5670 (Galaxy Fit) with Android 2.2 running?
    Couldn't find any iSync Plug-in nor software for Samsung phones fitting ...
    Thanx for any help!

    Hello,
    if you need to sync your media files as well, you might want to have a look at FoneSync for Android. It features an iTunes like interface and syncs contacts, calendars, music and photos.
    Kind regards
    Jan Fuellemann
    Disclaimer: I work for nova media, but get no benefit or compansation from posting here

  • How do I use Qt and OpenGL with Visual Studio

    Hi! I mainly want to program in C++ and I want to use Qt and OpenGL with Visual Studio.
    I am currently revising C++ and later on i am going to start reading Qt and OpenGL. I have a background of
    Embedded firmware design(C and Assembly).
    The Visual Studio Version I have is 2013 ultimate. How do I use Qt and OpenGL with Visual Studio?
    Thanks
    Alexandros

    Hi ClassicalGuitar,
    The forum supports VS setup and installation. And your issue is not about the forum. I will move the thread to off-topic forum. Thanks for your understanding.
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • How to print the Terms and Condition page ine the sap-script

    Hi experts,
                             i got the requirement that how to print the Terms and condition page in the script,i have the three pages, having the same main window, in the last of the main window(all three pages)  i have called the hard coded text(i.e so10 text), but when i am displaying the output  data get printed in the first page but i am getting the second page heading on the top of  the terms and condiions page. In all the three pages i  have the same main window, if i  make change in any window i will affect all the other main  windows.  so please suggest me how i need to go.HOW TO GET GRID OF THE TEXT ON THE TOP OF THE SECOND PAGE OF THE TERMS AND CONDITONS.
    like this i have called in the MAIN WINDOW
    /E : LAST ( IN ALL THREE PAGES)
           INCLUDE ZSD_INVOICE_TERMS TEXT OBJECT TEXT LANGUAGE EN.
    IN THE TCODE SO10
    NEW PAGE TERMS.
    1) TERM MS AND CONDITONS  TEXT.................................................
    FIRST->NEXT, NEXT->NEXT,,   TERMS--->TERMS.

    Hi,
    1. Create a new page by Name : LAST
    2. Identify the text element which will be the last element in the form in the debug mode.
    Mostly Ex: SUM, TOTAL, LAST etc.,
    3. the page linking should be
    First --> Next
    Next --> Next
    4. In the Text element identified in the step 3.
    Write the following code
    /: NEW PAGE  LAST
    /: INCLUDE the standard text created for the terms and conditions in SO10
    Check the syntax for the command but the logic will be the same.
    It should resolve your problem.

  • How to link Icloud calendar and contacts with windows 8

    How to link Icloud Calendar and contacts with windows8

    Hi ATarakdjian,
    If you are having issues configuring iCloud Calendar on your Windows 8 machine, you may find the following article helpful:
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Cheers,
    - Brenden

  • How to use the eventing and databag with a WAS 6.20 ?

    How to use the eventing and databag with a WAS 6.20 ?
    Is what there is a good guide for these services?
    Thank's

    In the raise event you can pass the value
    like below.
    <SCRIPT>
    function raiseEvt(value1){
    if(window.document.domain == window.location.hostname){
    if ( document.domain.indexOf(".") > 0 ) document.domain = document.domain.substr(document.domain.indexOf(".")+1);
       EPCMPROXY.raiseEvent( "urn:com.sap:BWEvents","BWiViewevent", value1, null );
      // alert('tree domain'+document.domain);
    </SCRIPT>
    and in the
    subscribe event you can get the values like below.
    <script language="javascript">
    if(window.document.domain == window.location.hostname){
    document.domain = document.domain.substring(document.domain.indexOf('.')+1);
        EPCMPROXY.subscribeEvent("urn:com.sap:BWEvents","BWiViewevent", window, "myreceiveEvent");
    function myreceiveEvent( eventObj ) {
          document.forms[0].gp_hidden.value = eventObj.dataObject;
    </script>
    Also look at the following link for a complete documentation.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/Enterprise%20Portal%20Client.pdf
    Regards
    Raja

Maybe you are looking for