How to print Smartform in Draft mode.

HI all,
we are using Wipro LQ DSI 5232 printer, our problem is while printing smartform , its coming in Roman but it should come in Draft Mode.
When it goes to Roman mode the printing become very slow.
How to set in default Draft mode.
Regards,
Rahul.

Hi,
there is an SBO setting inside
Administation>System Init>Print preferences>Print Draft Watermark on Draft
Then a "DRAFT" watermark will appear if it's printed before adding.
In CR use a stored proc to get data back according to the Objectid@.
Then if its the object id of a draft then add a CR watermark.
Hope this helps.
Regards,
D

Similar Messages

  • Wrong colors when printing PDF in Draft Mode Printing (Win)

    I am using Acrobat to print my contact sheets from the Print module (Windows). If I use the "Draft Mode Printing" in LR, colors in the resulting PDF are way off. Any idea what the settings in Acrobat should be, to obtain correct colors? I have tried many combinations in the "Adobe PDF Conversion Settings", especially in the "Color" tab, but with no success.
    Note that colors in the resulting PDF are correct instead when I disable the "Draft Mode Printing" from LR.

    No I did not build 1:1 previews first. The point of using the draft print is to me to do quick, so would rather not build any 1:1 preview. Anyway, I don't believe I got what you wrote: if I do not build the 1:1 preview, what is the color space of the print output in Draft Mode?

  • Time capsule wireless printing only in draft mode (HP D2460)

    I cannot print through time capsule wireless printing in hight quality, it prints only in draft mode. My printer is a HP D2460 and is connected to time capsule through its usb conection. I am connecting and trying to print trhough a macbook pro wirelessly connected to timecapsule.
    I already made all driver updates.
    If anyone can help, I would appreciate.
    Thanks

    no one has any suggestions ??

  • How do I print text in draft mode in CS5.5?

    I'm sure this is really simple, but I'm stumped, and I haven't been able to find instructions online. A page of text I'm trying to print prints at the highest quality no matter what I do to try to change the settings. Not only is it wasting ink, but it's taking forever to print just a few paragraphs. I saw a reference in an online forum about printing in draft mode, but no instructions on how to do it. Does anyone know? Thanks.

    Thanks. I meant to get back to you sooner but I've been busy. I'll have to consider looking into a laser again at some point. Last time I looked was several years ago, and prices for what I wanted (color, oversize printing, envelope printing, color photocopying) were higher than I wanted. If it would save me money to buy just an 8 1/2 x 11 monochrome for printing emails and stuff, though, maybe I should consider it. I'm doing a lot less photo printing than I used to. I also didn't want to take up more space by having two printers, but if the savings were significant it might be worth it.

  • How to print variable in binary mode?

    I would like to print NewVar variable in binary mode e.g.:
    byte NewVar = 0x25;
    System.out.println( "print here NewVar in binary mode" );
    1) How to do it?
    2) Above I declared NewVar in hexadecimal, how to declare it in binary mode?
    3) Where in the net I can find downloadable (offline) Java Programming Manual?
    Thanks.

    Read the API. Take a look at the class java.lang.Integer. There you'll find all you need.

  • How to debug smartform in display mode?

    Hi,
    How to debug smartforms program lines in display mode? Need help on this issue?
    <MOVED BY MODERATOR TO THE CORRECT FORUM>
    Edited by: Alvaro Tejada Galindo on Jan 12, 2010 11:32 AM
    Moderator message - Cross post locked
    Edited by: Rob Burbank on Jan 12, 2010 11:57 AM

    Please search before posting
    << Cut and paste without attribution from http://it.toolbox.com/wiki/index.php/SAP_Smart_Forms removed >>
    << Please don't ask other to follow the forum rules and violate them yourself! >>
    *In simple way---follow these steps:-
    If you are in a non-modifiable client:
    Display your SmartForm.
    Go to Environment and copy the function module name.
    Go to SE37 and display the function.
    Go to Smartforms and copy the node name where you want to debugg.
    Go to the function and search for the name in main program. Put a soft break point.*
    Manas M
    Edited by: Kumar Manas Mishra on Jan 12, 2010 12:05 PM
    Edited by: Kumar Manas Mishra on Jan 12, 2010 12:06 PM
    Edited by: Rob Burbank on Jan 12, 2010 11:52 AM

  • How to print Report in Landscape mode

    Hi,
    I set the Header,Body,Footer section to Landscape Orientation. still its printing report in Portrait mode.
    Your suggestions are welcome
    Vikas
    null

    Thanks, but its not working on web, i tried it on client server it works fine.
    anyway Thanks for your time, on your end is it working on WEB,
    Thanks
    Vikas
    null

  • How to print report in Character mode using Oracle Developer 10g

    Dear,
    I migrate my forms and reports from Oracle Developer 6 to Oracle Developer reports 10g,
    We are using some character mode report for bill printing. But when i run these report through menu on Web i got error message like
    "REP-1920: Character mode runtime incompatible with DESFORMAT of PDF, HTML, HTMLCSS, SPREADSHEET or RTF"
    i don't want to change the character mode to any other mode because it effects the printing.
    so how can it possible to set the mode to character and view report on Web.
    pls. suggest me solution.

    You have to pass the PRT file name as value for the DESFORMAT and use mode= MODE=CHARACTER.
    E.g.
    http://<host name>:<port>/reports/rwservlet?desformat=dflt&mode=character&.....

  • How to print report in Charactor mode using Oracle Developer 10g

    Dear,
    I have converted my few reports from Oracle Developer forms 5 to Oracle Developer forms 10g,
    i am running these reports on Web, for that i have configour "rwserver" server.
    But when i run these report through menu on Web i got error message like
    "REP-1920: Character mode runtime incompatible with DESFORMAT of PDF, HTML, HTMLCSS, SPREADSHEET or RTF"
    i don't want to change the character mode to any other mode because it effects the printing.
    so how can it possible to set the mode to character and view report on Web.
    pls. suggest me solution.
    Thanks

    You have to pass the PRT file name as value for the DESFORMAT and use mode= MODE=CHARACTER.
    E.g.
    http://<host name>:<port>/reports/rwservlet?desformat=dflt&mode=character&.....

  • How to print report in Draft and Document

    Dear all,
    I have a proplem when preview crystal report in Document .
    I make a form using Crystal report for Incoming payment, then i import to it.
    For example
    When i create a document in Incoming Payment and save it. There is no problem with the crystal report.
    But if i save the data as a draft. then i preview it , the report that i make in crystal report become blank.
    After i check, the table is different when i save as a draft.
    My question is How to make a dynamic crystal report so i can preview the report as a draft and preview it when the data have saved in original table ?
    Thanks in advance
    regards
    Jia Shun
    Edited by: Jia Shun on Jan 10, 2011 4:44 AM
    Edited by: Jia Shun on Jan 10, 2011 4:46 AM

    Jia Shun,
    I had the same issue for printing A/R Invoices - I created a Crystal Report based on a SQL View, works fine with A/R Invoice document, but the Draft Invoice printing has 3 pages: 1st page blank, 2nd page with watermark "DRAFT", 3rd page my Crystal Report layout without any data. When printing normally it is only 1 page.
    Here is what I did as a work around:
    Create two SQL Views, one select from OINV (joining INV1 and other tables needed), the other select from ODRF (joining DRF1 and other tables needed), for the draft printing.
    Create two identicle Crystal Reports, only difference are: datasource location (from different views), the "draft" crystal report has a watermark section.
    Go to Administration>System Initialization>Print Preferences and uncheck "Print draft watermark..."
    Import both crystal reports. Invoice can be printed normally. But the Draft Invoice has more steps: Open Draft document report, change settings so it shows the DocEntry in the Draft Table. Select and open the desired document, hit Print Preview, and enter the DocEntry, it displays the layout with data and "DRAFT" watermark.
    This is a workaround. I don't like it because it is not scalable - too much workload if you want to print 100 invoices.
    Hopefully someone will provide a better solution.
    regards,
    G

  • How to print smartform on both side of pages.

    Hi,
    I have requirment of printing the smarform on both side of the page. for example the header data and item date on front of the page and terms and condition on the back of the page... can anyone help wht printer settings and wht changes in the smartform needed... its very urgent pls help ASAP.
    Thanks in advance.
    Abhishek Pandey.

    Hi Abhishek,
    In PAGE node u have Output Options Tab.
    In Output Options U can find the field Print Mode
    There u need to give the D.
    Default: No change of print mode
    S Begin new page in SIMPLEX mode (single-sided)
    D Begin new page in DUPLEX mode (double-sided)
    T Begin new page in TUMBLE DUPLEX mode (double-sided)
       DUPLEX:
         The current print mode is set to DUPLEX (double-sided print, long-edge
         binding) and a new page is started. A form page defined with DUPLEX is
         always printed on the front of the page, never on the back of the page.
         If the next form page contains the attribute value DEFAULT, it is output
         on the back of the page.
    Best regards,
    raam

  • How to print smartforms

    Hi All,
    I have to print my smart form.I have a printer  installed on my computer  but how should let SAP know about it?

    Hi,
    The Basis person has to configure the printer as an OUTPUT Device (default) for printing anything.
      The smart form which you developed is a Stand Alone one? I mean You are executing it from SE38 or from a std Transaction. Like for example for PO  it can be executed from ME22/23 or from ME9F? If it s Std Smartform output then you have to attach the SMARTFORM  to the related OUTPUT TYPE and DRIVER PROGRAM. Use the Transaction NACE to go there depending on your application of the Smart form for which you developed.
    Regards,
    Chaitanya

  • How to print smartforms which is comes as result of transactions in queue

    Hi All,
          I was working on CRM development based on Pre-Inpsection and Post-Inspection where i am facing some problems in the development work.In this program we have to print Pre-Inspection and Post-Inspection forms through transactions.
    Once Program runs .for this we need to create Activity with function module
    BAPI_ACTIVITYCRM_CREATEMULTI   with respect to Pre-Inpection and Post-Inspection.And the Program is required to print the form  as an output from these transactions.I need to know how can we run a program that goes transaction by transaction in a queue and print these forms using actvities as inputs.
    One more point is that i have only form layout for Pre_inspection and Post_Inspection.
    Can anyone help me reslove this issue.Its urgent.Please reply ASAP.
    Regards,
        Neethu Ajith

    Keys for the Layers panel
    Result
    Windows
    Mac OS
    Load layer transparency as a selection
    Control-click layer thumbnail
    Command-click layer thumbnail

  • How to print smartform from a report

    Im displaying a report, which contains several documents, whereby which ewch document is connected to a smartform.
    The page displaying the report contains a button 'Print'
    When clicking on the Print button, all the documents in the report should be printed.
    But my program is creating a spool file of the report, which will be printed further - its not what I want
    I want the program to print the smartforms of each documents on the report directly.
    heres my code and I dont know what I should do to be able to print the smartforms directly
    Get the function module name of the smartform.
        CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
          EXPORTING
            formname = '/EU000/FI_PRINT_DEBIT_NOTE'
          IMPORTING
            fm_name  = g_fm_name.
    gw_options-tdnoprev = ' '.
    gw_options-tddest = 'LOCL'.
    gw_options-tdprinter = 'LOCL'.
    gw_options-tdnewid = 'X'.
    gw_options-tdimmed = 'X'.
    gw_control-preview = ' '.
    gw_control-no_dialog = 'X'.
    write: text-006,' ', text-007, ' ', text-008.
    write:/.
    For all the documents
        LOOP AT gi_all_data INTO gw_all_data.
          write: gw_all_data-gjahr(4), ' ',gw_all_data-belnr,'     ', gw_all_data-belnr.
          write:/.
    CASE SY-UCOMM.
    WHEN 'PRINT'.
    Call the smarform
          CALL FUNCTION g_fm_name
            EXPORTING
              gw_all_data = gw_all_data
              user_settings = ' '
              output_options = gw_options
              control_parameters = gw_control.
    WHEN 'BACK'.
    LEAVE SCREEN.
    ENDCASE.

    DATA:   x_control_parameters TYPE ssfctrlop,
            x_output_options TYPE ssfcompop.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS: p_prin LIKE usr01-spld.
    SELECTION-SCREEN BEGIN OF LINE.
    INITIALIZATION.
      SELECT  spld
              FROM usr01
              INTO p_prin UP TO 1 ROWS
              WHERE bname = sy-uname.
      ENDSELECT.
    START-OF-SELECTION.
      x_output_options-tdimmed = c_x.
      x_output_options-tddest = p_prin.
      x_output_options-tdnewid = c_x.
      x_output_options-tdreceiver = sy-uname.
      x_output_options-tdcopies = '001'.
      x_control_parameters-device = 'PRINTER'.
      x_control_parameters-no_dialog = c_x.
      x_control_parameters-langu = sy-langu.
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
       EXPORTING
         formname                 = 'Z_SMARTFORM'
      VARIANT                  = ' '
      DIRECT_CALL              = ' '
      IMPORTING
        fm_name                  = f_name1
      EXCEPTIONS
        no_form                  = 1
        no_function_module       = 2
        OTHERS                   = 3
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    IF P_PRI = 'X'.
      CALL FUNCTION F_NAME1
        EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
       CONTROL_PARAMETERS          = X_CONTROL_PARAMETERS
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
       OUTPUT_OPTIONS              = X_OUTPUT_OPTIONS
      USER_SETTINGS              = 'X'
          wa_header                  = wa_zmexh51
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
        TABLES
          tab_item                   = TAB_ZMEXD51
          tab_item1                  = TAB_ZMEXS51
    EXCEPTIONS
      FORMATTING_ERROR           = 1
      INTERNAL_ERROR             = 2
      SEND_ERROR                 = 3
      USER_CANCELED              = 4
      OTHERS                     = 5
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ELSEIF P_PRE = 'X'.
      CALL FUNCTION F_NAME1
        EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
      CONTROL_PARAMETERS          = X_CONTROL_PARAMETERS
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
      OUTPUT_OPTIONS              = X_OUTPUT_OPTIONS
      USER_SETTINGS              = 'X'
          wa_header                  = wa_zmexh51
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
        TABLES
          tab_item                   = TAB_ZMEXD51
          tab_item1                  = TAB_ZMEXS51
    EXCEPTIONS
      FORMATTING_ERROR           = 1
      INTERNAL_ERROR             = 2
      SEND_ERROR                 = 3
      USER_CANCELED              = 4
      OTHERS                     = 5
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDIF.
    Check the above code its just similar requirement  it may helpful to you.
    Thanks,
    Phani.

  • How to print smartform on the basis of selection criteria

    i want to print multiple pages in smartform by using  select-options  bkpf-belnr.
    ex:1500002103 to 1500002106.
    print all the pages lie in between this range.
    Moderator message : Spec dumping is not allowed, search for available information. Thread locked.
    Edited by: Vinod Kumar on Sep 27, 2011 12:21 PM

    Hi,
      Refer the link select option in smartforms and read what i suggested..
    Regards,
    Dhina..

Maybe you are looking for